Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / block / drbd / drbd_req.h
1 /*
2    drbd_req.h
3
4    This file is part of DRBD by Philipp Reisner and Lars Ellenberg.
5
6    Copyright (C) 2006-2008, LINBIT Information Technologies GmbH.
7    Copyright (C) 2006-2008, Lars Ellenberg <lars.ellenberg@linbit.com>.
8    Copyright (C) 2006-2008, Philipp Reisner <philipp.reisner@linbit.com>.
9
10    DRBD is free software; you can redistribute it and/or modify
11    it under the terms of the GNU General Public License as published by
12    the Free Software Foundation; either version 2, or (at your option)
13    any later version.
14
15    DRBD is distributed in the hope that it will be useful,
16    but WITHOUT ANY WARRANTY; without even the implied warranty of
17    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18    GNU General Public License for more details.
19
20    You should have received a copy of the GNU General Public License
21    along with drbd; see the file COPYING.  If not, write to
22    the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
23  */
24
25 #ifndef _DRBD_REQ_H
26 #define _DRBD_REQ_H
27
28 #include <linux/module.h>
29
30 #include <linux/slab.h>
31 #include <linux/drbd.h>
32 #include "drbd_int.h"
33
34 /* The request callbacks will be called in irq context by the IDE drivers,
35    and in Softirqs/Tasklets/BH context by the SCSI drivers,
36    and by the receiver and worker in kernel-thread context.
37    Try to get the locking right :) */
38
39 /*
40  * Objects of type struct drbd_request do only exist on a R_PRIMARY node, and are
41  * associated with IO requests originating from the block layer above us.
42  *
43  * There are quite a few things that may happen to a drbd request
44  * during its lifetime.
45  *
46  *  It will be created.
47  *  It will be marked with the intention to be
48  *    submitted to local disk and/or
49  *    send via the network.
50  *
51  *  It has to be placed on the transfer log and other housekeeping lists,
52  *  In case we have a network connection.
53  *
54  *  It may be identified as a concurrent (write) request
55  *    and be handled accordingly.
56  *
57  *  It may me handed over to the local disk subsystem.
58  *  It may be completed by the local disk subsystem,
59  *    either successfully or with io-error.
60  *  In case it is a READ request, and it failed locally,
61  *    it may be retried remotely.
62  *
63  *  It may be queued for sending.
64  *  It may be handed over to the network stack,
65  *    which may fail.
66  *  It may be acknowledged by the "peer" according to the wire_protocol in use.
67  *    this may be a negative ack.
68  *  It may receive a faked ack when the network connection is lost and the
69  *  transfer log is cleaned up.
70  *  Sending may be canceled due to network connection loss.
71  *  When it finally has outlived its time,
72  *    corresponding dirty bits in the resync-bitmap may be cleared or set,
73  *    it will be destroyed,
74  *    and completion will be signalled to the originator,
75  *      with or without "success".
76  */
77
78 enum drbd_req_event {
79         CREATED,
80         TO_BE_SENT,
81         TO_BE_SUBMITTED,
82
83         /* XXX yes, now I am inconsistent...
84          * these are not "events" but "actions"
85          * oh, well... */
86         QUEUE_FOR_NET_WRITE,
87         QUEUE_FOR_NET_READ,
88         QUEUE_FOR_SEND_OOS,
89
90         /* An empty flush is queued as P_BARRIER,
91          * which will cause it to complete "successfully",
92          * even if the local disk flush failed.
93          *
94          * Just like "real" requests, empty flushes (blkdev_issue_flush()) will
95          * only see an error if neither local nor remote data is reachable. */
96         QUEUE_AS_DRBD_BARRIER,
97
98         SEND_CANCELED,
99         SEND_FAILED,
100         HANDED_OVER_TO_NETWORK,
101         OOS_HANDED_TO_NETWORK,
102         CONNECTION_LOST_WHILE_PENDING,
103         READ_RETRY_REMOTE_CANCELED,
104         RECV_ACKED_BY_PEER,
105         WRITE_ACKED_BY_PEER,
106         WRITE_ACKED_BY_PEER_AND_SIS, /* and set_in_sync */
107         CONFLICT_RESOLVED,
108         POSTPONE_WRITE,
109         NEG_ACKED,
110         BARRIER_ACKED, /* in protocol A and B */
111         DATA_RECEIVED, /* (remote read) */
112
113         COMPLETED_OK,
114         READ_COMPLETED_WITH_ERROR,
115         READ_AHEAD_COMPLETED_WITH_ERROR,
116         WRITE_COMPLETED_WITH_ERROR,
117         DISCARD_COMPLETED_NOTSUPP,
118         DISCARD_COMPLETED_WITH_ERROR,
119
120         ABORT_DISK_IO,
121         RESEND,
122         FAIL_FROZEN_DISK_IO,
123         RESTART_FROZEN_DISK_IO,
124         NOTHING,
125 };
126
127 /* encoding of request states for now.  we don't actually need that many bits.
128  * we don't need to do atomic bit operations either, since most of the time we
129  * need to look at the connection state and/or manipulate some lists at the
130  * same time, so we should hold the request lock anyways.
131  */
132 enum drbd_req_state_bits {
133         /* 3210
134          * 0000: no local possible
135          * 0001: to be submitted
136          *    UNUSED, we could map: 011: submitted, completion still pending
137          * 0110: completed ok
138          * 0010: completed with error
139          * 1001: Aborted (before completion)
140          * 1x10: Aborted and completed -> free
141          */
142         __RQ_LOCAL_PENDING,
143         __RQ_LOCAL_COMPLETED,
144         __RQ_LOCAL_OK,
145         __RQ_LOCAL_ABORTED,
146
147         /* 87654
148          * 00000: no network possible
149          * 00001: to be send
150          * 00011: to be send, on worker queue
151          * 00101: sent, expecting recv_ack (B) or write_ack (C)
152          * 11101: sent,
153          *        recv_ack (B) or implicit "ack" (A),
154          *        still waiting for the barrier ack.
155          *        master_bio may already be completed and invalidated.
156          * 11100: write acked (C),
157          *        data received (for remote read, any protocol)
158          *        or finally the barrier ack has arrived (B,A)...
159          *        request can be freed
160          * 01100: neg-acked (write, protocol C)
161          *        or neg-d-acked (read, any protocol)
162          *        or killed from the transfer log
163          *        during cleanup after connection loss
164          *        request can be freed
165          * 01000: canceled or send failed...
166          *        request can be freed
167          */
168
169         /* if "SENT" is not set, yet, this can still fail or be canceled.
170          * if "SENT" is set already, we still wait for an Ack packet.
171          * when cleared, the master_bio may be completed.
172          * in (B,A) the request object may still linger on the transaction log
173          * until the corresponding barrier ack comes in */
174         __RQ_NET_PENDING,
175
176         /* If it is QUEUED, and it is a WRITE, it is also registered in the
177          * transfer log. Currently we need this flag to avoid conflicts between
178          * worker canceling the request and tl_clear_barrier killing it from
179          * transfer log.  We should restructure the code so this conflict does
180          * no longer occur. */
181         __RQ_NET_QUEUED,
182
183         /* well, actually only "handed over to the network stack".
184          *
185          * TODO can potentially be dropped because of the similar meaning
186          * of RQ_NET_SENT and ~RQ_NET_QUEUED.
187          * however it is not exactly the same. before we drop it
188          * we must ensure that we can tell a request with network part
189          * from a request without, regardless of what happens to it. */
190         __RQ_NET_SENT,
191
192         /* when set, the request may be freed (if RQ_NET_QUEUED is clear).
193          * basically this means the corresponding P_BARRIER_ACK was received */
194         __RQ_NET_DONE,
195
196         /* whether or not we know (C) or pretend (B,A) that the write
197          * was successfully written on the peer.
198          */
199         __RQ_NET_OK,
200
201         /* peer called drbd_set_in_sync() for this write */
202         __RQ_NET_SIS,
203
204         /* keep this last, its for the RQ_NET_MASK */
205         __RQ_NET_MAX,
206
207         /* Set when this is a write, clear for a read */
208         __RQ_WRITE,
209
210         /* Should call drbd_al_complete_io() for this request... */
211         __RQ_IN_ACT_LOG,
212
213         /* The peer has sent a retry ACK */
214         __RQ_POSTPONED,
215
216         /* would have been completed,
217          * but was not, because of drbd_suspended() */
218         __RQ_COMPLETION_SUSP,
219
220         /* We expect a receive ACK (wire proto B) */
221         __RQ_EXP_RECEIVE_ACK,
222
223         /* We expect a write ACK (wite proto C) */
224         __RQ_EXP_WRITE_ACK,
225
226         /* waiting for a barrier ack, did an extra kref_get */
227         __RQ_EXP_BARR_ACK,
228 };
229
230 #define RQ_LOCAL_PENDING   (1UL << __RQ_LOCAL_PENDING)
231 #define RQ_LOCAL_COMPLETED (1UL << __RQ_LOCAL_COMPLETED)
232 #define RQ_LOCAL_OK        (1UL << __RQ_LOCAL_OK)
233 #define RQ_LOCAL_ABORTED   (1UL << __RQ_LOCAL_ABORTED)
234
235 #define RQ_LOCAL_MASK      ((RQ_LOCAL_ABORTED << 1)-1)
236
237 #define RQ_NET_PENDING     (1UL << __RQ_NET_PENDING)
238 #define RQ_NET_QUEUED      (1UL << __RQ_NET_QUEUED)
239 #define RQ_NET_SENT        (1UL << __RQ_NET_SENT)
240 #define RQ_NET_DONE        (1UL << __RQ_NET_DONE)
241 #define RQ_NET_OK          (1UL << __RQ_NET_OK)
242 #define RQ_NET_SIS         (1UL << __RQ_NET_SIS)
243
244 /* 0x1f8 */
245 #define RQ_NET_MASK        (((1UL << __RQ_NET_MAX)-1) & ~RQ_LOCAL_MASK)
246
247 #define RQ_WRITE           (1UL << __RQ_WRITE)
248 #define RQ_IN_ACT_LOG      (1UL << __RQ_IN_ACT_LOG)
249 #define RQ_POSTPONED       (1UL << __RQ_POSTPONED)
250 #define RQ_COMPLETION_SUSP (1UL << __RQ_COMPLETION_SUSP)
251 #define RQ_EXP_RECEIVE_ACK (1UL << __RQ_EXP_RECEIVE_ACK)
252 #define RQ_EXP_WRITE_ACK   (1UL << __RQ_EXP_WRITE_ACK)
253 #define RQ_EXP_BARR_ACK    (1UL << __RQ_EXP_BARR_ACK)
254
255 /* For waking up the frozen transfer log mod_req() has to return if the request
256    should be counted in the epoch object*/
257 #define MR_WRITE       1
258 #define MR_READ        2
259
260 static inline void drbd_req_make_private_bio(struct drbd_request *req, struct bio *bio_src)
261 {
262         struct bio *bio;
263         bio = bio_clone(bio_src, GFP_NOIO); /* XXX cannot fail?? */
264
265         req->private_bio = bio;
266
267         bio->bi_private  = req;
268         bio->bi_end_io   = drbd_request_endio;
269         bio->bi_next     = NULL;
270 }
271
272 /* Short lived temporary struct on the stack.
273  * We could squirrel the error to be returned into
274  * bio->bi_iter.bi_size, or similar. But that would be too ugly. */
275 struct bio_and_error {
276         struct bio *bio;
277         int error;
278 };
279
280 extern void start_new_tl_epoch(struct drbd_connection *connection);
281 extern void drbd_req_destroy(struct kref *kref);
282 extern void _req_may_be_done(struct drbd_request *req,
283                 struct bio_and_error *m);
284 extern int __req_mod(struct drbd_request *req, enum drbd_req_event what,
285                 struct bio_and_error *m);
286 extern void complete_master_bio(struct drbd_device *device,
287                 struct bio_and_error *m);
288 extern void request_timer_fn(unsigned long data);
289 extern void tl_restart(struct drbd_connection *connection, enum drbd_req_event what);
290 extern void _tl_restart(struct drbd_connection *connection, enum drbd_req_event what);
291 extern void tl_abort_disk_io(struct drbd_device *device);
292
293 /* this is in drbd_main.c */
294 extern void drbd_restart_request(struct drbd_request *req);
295
296 /* use this if you don't want to deal with calling complete_master_bio()
297  * outside the spinlock, e.g. when walking some list on cleanup. */
298 static inline int _req_mod(struct drbd_request *req, enum drbd_req_event what)
299 {
300         struct drbd_device *device = req->device;
301         struct bio_and_error m;
302         int rv;
303
304         /* __req_mod possibly frees req, do not touch req after that! */
305         rv = __req_mod(req, what, &m);
306         if (m.bio)
307                 complete_master_bio(device, &m);
308
309         return rv;
310 }
311
312 /* completion of master bio is outside of our spinlock.
313  * We still may or may not be inside some irqs disabled section
314  * of the lower level driver completion callback, so we need to
315  * spin_lock_irqsave here. */
316 static inline int req_mod(struct drbd_request *req,
317                 enum drbd_req_event what)
318 {
319         unsigned long flags;
320         struct drbd_device *device = req->device;
321         struct bio_and_error m;
322         int rv;
323
324         spin_lock_irqsave(&device->resource->req_lock, flags);
325         rv = __req_mod(req, what, &m);
326         spin_unlock_irqrestore(&device->resource->req_lock, flags);
327
328         if (m.bio)
329                 complete_master_bio(device, &m);
330
331         return rv;
332 }
333
334 static inline bool drbd_should_do_remote(union drbd_dev_state s)
335 {
336         return s.pdsk == D_UP_TO_DATE ||
337                 (s.pdsk >= D_INCONSISTENT &&
338                  s.conn >= C_WF_BITMAP_T &&
339                  s.conn < C_AHEAD);
340         /* Before proto 96 that was >= CONNECTED instead of >= C_WF_BITMAP_T.
341            That is equivalent since before 96 IO was frozen in the C_WF_BITMAP*
342            states. */
343 }
344 static inline bool drbd_should_send_out_of_sync(union drbd_dev_state s)
345 {
346         return s.conn == C_AHEAD || s.conn == C_WF_BITMAP_S;
347         /* pdsk = D_INCONSISTENT as a consequence. Protocol 96 check not necessary
348            since we enter state C_AHEAD only if proto >= 96 */
349 }
350
351 #endif