kernel/drivers/acpi/acpica/dbinput.c

   1 /*******************************************************************************
   2  *
   3  * Module Name: dbinput - user front-end to the AML debugger
   4  *
   5  ******************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2015, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <acpi/acpi.h>
  45 #include "accommon.h"
  46 #include "acdebug.h"
  47
  48 #define _COMPONENT          ACPI_CA_DEBUGGER
  49 ACPI_MODULE_NAME("dbinput")
  50
  51 /* Local prototypes */
  52 static u32 acpi_db_get_line(char *input_buffer);
  53
  54 static u32 acpi_db_match_command(char *user_command);
  55
  56 static void acpi_db_single_thread(void);
  57
  58 static void acpi_db_display_command_info(char *command, u8 display_all);
  59
  60 static void acpi_db_display_help(char *command);
  61
  62 static u8
  63 acpi_db_match_command_help(char *command,
  64                            const struct acpi_db_command_help *help);
  65
  66 /*
  67  * Top-level debugger commands.
  68  *
  69  * This list of commands must match the string table below it
  70  */
  71 enum acpi_ex_debugger_commands {
  72         CMD_NOT_FOUND = 0,
  73         CMD_NULL,
  74         CMD_ALLOCATIONS,
  75         CMD_ARGS,
  76         CMD_ARGUMENTS,
  77         CMD_BREAKPOINT,
  78         CMD_BUSINFO,
  79         CMD_CALL,
  80         CMD_DEBUG,
  81         CMD_DISASSEMBLE,
  82         CMD_DISASM,
  83         CMD_DUMP,
  84         CMD_EVALUATE,
  85         CMD_EXECUTE,
  86         CMD_EXIT,
  87         CMD_FIND,
  88         CMD_GO,
  89         CMD_HANDLERS,
  90         CMD_HELP,
  91         CMD_HELP2,
  92         CMD_HISTORY,
  93         CMD_HISTORY_EXE,
  94         CMD_HISTORY_LAST,
  95         CMD_INFORMATION,
  96         CMD_INTEGRITY,
  97         CMD_INTO,
  98         CMD_LEVEL,
  99         CMD_LIST,
 100         CMD_LOCALS,
 101         CMD_LOCKS,
 102         CMD_METHODS,
 103         CMD_NAMESPACE,
 104         CMD_NOTIFY,
 105         CMD_OBJECTS,
 106         CMD_OSI,
 107         CMD_OWNER,
 108         CMD_PATHS,
 109         CMD_PREDEFINED,
 110         CMD_PREFIX,
 111         CMD_QUIT,
 112         CMD_REFERENCES,
 113         CMD_RESOURCES,
 114         CMD_RESULTS,
 115         CMD_SET,
 116         CMD_STATS,
 117         CMD_STOP,
 118         CMD_TABLES,
 119         CMD_TEMPLATE,
 120         CMD_TRACE,
 121         CMD_TREE,
 122         CMD_TYPE,
 123 #ifdef ACPI_APPLICATION
 124         CMD_ENABLEACPI,
 125         CMD_EVENT,
 126         CMD_GPE,
 127         CMD_GPES,
 128         CMD_SCI,
 129         CMD_SLEEP,
 130
 131         CMD_CLOSE,
 132         CMD_LOAD,
 133         CMD_OPEN,
 134         CMD_UNLOAD,
 135
 136         CMD_TERMINATE,
 137         CMD_THREADS,
 138
 139         CMD_TEST,
 140 #endif
 141 };
 142
 143 #define CMD_FIRST_VALID     2
 144
 145 /* Second parameter is the required argument count */
 146
 147 static const struct acpi_db_command_info acpi_gbl_db_commands[] = {
 148         {"<NOT FOUND>", 0},
 149         {"<NULL>", 0},
 150         {"ALLOCATIONS", 0},
 151         {"ARGS", 0},
 152         {"ARGUMENTS", 0},
 153         {"BREAKPOINT", 1},
 154         {"BUSINFO", 0},
 155         {"CALL", 0},
 156         {"DEBUG", 1},
 157         {"DISASSEMBLE", 1},
 158         {"DISASM", 1},
 159         {"DUMP", 1},
 160         {"EVALUATE", 1},
 161         {"EXECUTE", 1},
 162         {"EXIT", 0},
 163         {"FIND", 1},
 164         {"GO", 0},
 165         {"HANDLERS", 0},
 166         {"HELP", 0},
 167         {"?", 0},
 168         {"HISTORY", 0},
 169         {"!", 1},
 170         {"!!", 0},
 171         {"INFORMATION", 0},
 172         {"INTEGRITY", 0},
 173         {"INTO", 0},
 174         {"LEVEL", 0},
 175         {"LIST", 0},
 176         {"LOCALS", 0},
 177         {"LOCKS", 0},
 178         {"METHODS", 0},
 179         {"NAMESPACE", 0},
 180         {"NOTIFY", 2},
 181         {"OBJECTS", 0},
 182         {"OSI", 0},
 183         {"OWNER", 1},
 184         {"PATHS", 0},
 185         {"PREDEFINED", 0},
 186         {"PREFIX", 0},
 187         {"QUIT", 0},
 188         {"REFERENCES", 1},
 189         {"RESOURCES", 0},
 190         {"RESULTS", 0},
 191         {"SET", 3},
 192         {"STATS", 1},
 193         {"STOP", 0},
 194         {"TABLES", 0},
 195         {"TEMPLATE", 1},
 196         {"TRACE", 1},
 197         {"TREE", 0},
 198         {"TYPE", 1},
 199 #ifdef ACPI_APPLICATION
 200         {"ENABLEACPI", 0},
 201         {"EVENT", 1},
 202         {"GPE", 1},
 203         {"GPES", 0},
 204         {"SCI", 0},
 205         {"SLEEP", 0},
 206
 207         {"CLOSE", 0},
 208         {"LOAD", 1},
 209         {"OPEN", 1},
 210         {"UNLOAD", 1},
 211
 212         {"TERMINATE", 0},
 213         {"THREADS", 3},
 214
 215         {"TEST", 1},
 216 #endif
 217         {NULL, 0}
 218 };
 219
 220 /*
 221  * Help for all debugger commands. First argument is the number of lines
 222  * of help to output for the command.
 223  */
 224 static const struct acpi_db_command_help acpi_gbl_db_command_help[] = {
 225         {0, "\nGeneral-Purpose Commands:", "\n"},
 226         {1, "  Allocations", "Display list of current memory allocations\n"},
 227         {2, "  Dump <Address>|<Namepath>", "\n"},
 228         {0, "       [Byte|Word|Dword|Qword]",
 229          "Display ACPI objects or memory\n"},
 230         {1, "  Handlers", "Info about global handlers\n"},
 231         {1, "  Help [Command]", "This help screen or individual command\n"},
 232         {1, "  History", "Display command history buffer\n"},
 233         {1, "  Level <DebugLevel>] [console]",
 234          "Get/Set debug level for file or console\n"},
 235         {1, "  Locks", "Current status of internal mutexes\n"},
 236         {1, "  Osi [Install|Remove <name>]",
 237          "Display or modify global _OSI list\n"},
 238         {1, "  Quit or Exit", "Exit this command\n"},
 239         {8, "  Stats <SubCommand>",
 240          "Display namespace and memory statistics\n"},
 241         {1, "     Allocations", "Display list of current memory allocations\n"},
 242         {1, "     Memory", "Dump internal memory lists\n"},
 243         {1, "     Misc", "Namespace search and mutex stats\n"},
 244         {1, "     Objects", "Summary of namespace objects\n"},
 245         {1, "     Sizes", "Sizes for each of the internal objects\n"},
 246         {1, "     Stack", "Display CPU stack usage\n"},
 247         {1, "     Tables", "Info about current ACPI table(s)\n"},
 248         {1, "  Tables", "Display info about loaded ACPI tables\n"},
 249         {1, "  ! <CommandNumber>", "Execute command from history buffer\n"},
 250         {1, "  !!", "Execute last command again\n"},
 251
 252         {0, "\nNamespace Access Commands:", "\n"},
 253         {1, "  Businfo", "Display system bus info\n"},
 254         {1, "  Disassemble <Method>", "Disassemble a control method\n"},
 255         {1, "  Find <AcpiName> (? is wildcard)",
 256          "Find ACPI name(s) with wildcards\n"},
 257         {1, "  Integrity", "Validate namespace integrity\n"},
 258         {1, "  Methods", "Display list of loaded control methods\n"},
 259         {1, "  Namespace [Object] [Depth]",
 260          "Display loaded namespace tree/subtree\n"},
 261         {1, "  Notify <Object> <Value>", "Send a notification on Object\n"},
 262         {1, "  Objects [ObjectType]",
 263          "Display summary of all objects or just given type\n"},
 264         {1, "  Owner <OwnerId> [Depth]",
 265          "Display loaded namespace by object owner\n"},
 266         {1, "  Paths", "Display full pathnames of namespace objects\n"},
 267         {1, "  Predefined", "Check all predefined names\n"},
 268         {1, "  Prefix [<Namepath>]", "Set or Get current execution prefix\n"},
 269         {1, "  References <Addr>", "Find all references to object at addr\n"},
 270         {1, "  Resources [DeviceName]",
 271          "Display Device resources (no arg = all devices)\n"},
 272         {1, "  Set N <NamedObject> <Value>", "Set value for named integer\n"},
 273         {1, "  Template <Object>", "Format/dump a Buffer/ResourceTemplate\n"},
 274         {1, "  Type <Object>", "Display object type\n"},
 275
 276         {0, "\nControl Method Execution Commands:", "\n"},
 277         {1, "  Arguments (or Args)", "Display method arguments\n"},
 278         {1, "  Breakpoint <AmlOffset>", "Set an AML execution breakpoint\n"},
 279         {1, "  Call", "Run to next control method invocation\n"},
 280         {1, "  Debug <Namepath> [Arguments]", "Single Step a control method\n"},
 281         {6, "  Evaluate", "Synonym for Execute\n"},
 282         {5, "  Execute <Namepath> [Arguments]", "Execute control method\n"},
 283         {1, "     Hex Integer", "Integer method argument\n"},
 284         {1, "     \"Ascii String\"", "String method argument\n"},
 285         {1, "     (Hex Byte List)", "Buffer method argument\n"},
 286         {1, "     [Package Element List]", "Package method argument\n"},
 287         {1, "  Go", "Allow method to run to completion\n"},
 288         {1, "  Information", "Display info about the current method\n"},
 289         {1, "  Into", "Step into (not over) a method call\n"},
 290         {1, "  List [# of Aml Opcodes]", "Display method ASL statements\n"},
 291         {1, "  Locals", "Display method local variables\n"},
 292         {1, "  Results", "Display method result stack\n"},
 293         {1, "  Set <A|L> <#> <Value>", "Set method data (Arguments/Locals)\n"},
 294         {1, "  Stop", "Terminate control method\n"},
 295         {5, "  Trace <State> [<Namepath>] [Once]",
 296          "Trace control method execution\n"},
 297         {1, "     Enable", "Enable all messages\n"},
 298         {1, "     Disable", "Disable tracing\n"},
 299         {1, "     Method", "Enable method execution messages\n"},
 300         {1, "     Opcode", "Enable opcode execution messages\n"},
 301         {1, "  Tree", "Display control method calling tree\n"},
 302         {1, "  <Enter>", "Single step next AML opcode (over calls)\n"},
 303
 304 #ifdef ACPI_APPLICATION
 305         {0, "\nHardware Simulation Commands:", "\n"},
 306         {1, "  EnableAcpi", "Enable ACPI (hardware) mode\n"},
 307         {1, "  Event <F|G> <Value>", "Generate AcpiEvent (Fixed/GPE)\n"},
 308         {1, "  Gpe <GpeNum> [GpeBlockDevice]", "Simulate a GPE\n"},
 309         {1, "  Gpes", "Display info on all GPE devices\n"},
 310         {1, "  Sci", "Generate an SCI\n"},
 311         {1, "  Sleep [SleepState]", "Simulate sleep/wake sequence(s) (0-5)\n"},
 312
 313         {0, "\nFile I/O Commands:", "\n"},
 314         {1, "  Close", "Close debug output file\n"},
 315         {1, "  Load <Input Filename>", "Load ACPI table from a file\n"},
 316         {1, "  Open <Output Filename>", "Open a file for debug output\n"},
 317         {1, "  Unload <Namepath>",
 318          "Unload an ACPI table via namespace object\n"},
 319
 320         {0, "\nUser Space Commands:", "\n"},
 321         {1, "  Terminate", "Delete namespace and all internal objects\n"},
 322         {1, "  Thread <Threads><Loops><NamePath>",
 323          "Spawn threads to execute method(s)\n"},
 324
 325         {0, "\nDebug Test Commands:", "\n"},
 326         {3, "  Test <TestName>", "Invoke a debug test\n"},
 327         {1, "     Objects", "Read/write/compare all namespace data objects\n"},
 328         {1, "     Predefined",
 329          "Execute all ACPI predefined names (_STA, etc.)\n"},
 330 #endif
 331         {0, NULL, NULL}
 332 };
 333
 334 /*******************************************************************************
 335  *
 336  * FUNCTION:    acpi_db_match_command_help
 337  *
 338  * PARAMETERS:  command             - Command string to match
 339  *              help                - Help table entry to attempt match
 340  *
 341  * RETURN:      TRUE if command matched, FALSE otherwise
 342  *
 343  * DESCRIPTION: Attempt to match a command in the help table in order to
 344  *              print help information for a single command.
 345  *
 346  ******************************************************************************/
 347
 348 static u8
 349 acpi_db_match_command_help(char *command,
 350                            const struct acpi_db_command_help *help)
 351 {
 352         char *invocation = help->invocation;
 353         u32 line_count;
 354
 355         /* Valid commands in the help table begin with a couple of spaces */
 356
 357         if (*invocation != ' ') {
 358                 return (FALSE);
 359         }
 360
 361         while (*invocation == ' ') {
 362                 invocation++;
 363         }
 364
 365         /* Match command name (full command or substring) */
 366
 367         while ((*command) && (*invocation) && (*invocation != ' ')) {
 368                 if (tolower((int)*command) != tolower((int)*invocation)) {
 369                         return (FALSE);
 370                 }
 371
 372                 invocation++;
 373                 command++;
 374         }
 375
 376         /* Print the appropriate number of help lines */
 377
 378         line_count = help->line_count;
 379         while (line_count) {
 380                 acpi_os_printf("%-38s : %s", help->invocation,
 381                                help->description);
 382                 help++;
 383                 line_count--;
 384         }
 385
 386         return (TRUE);
 387 }
 388
 389 /*******************************************************************************
 390  *
 391  * FUNCTION:    acpi_db_display_command_info
 392  *
 393  * PARAMETERS:  command             - Command string to match
 394  *              display_all         - Display all matching commands, or just
 395  *                                    the first one (substring match)
 396  *
 397  * RETURN:      None
 398  *
 399  * DESCRIPTION: Display help information for a Debugger command.
 400  *
 401  ******************************************************************************/
 402
 403 static void acpi_db_display_command_info(char *command, u8 display_all)
 404 {
 405         const struct acpi_db_command_help *next;
 406         u8 matched;
 407
 408         next = acpi_gbl_db_command_help;
 409         while (next->invocation) {
 410                 matched = acpi_db_match_command_help(command, next);
 411                 if (!display_all && matched) {
 412                         return;
 413                 }
 414
 415                 next++;
 416         }
 417 }
 418
 419 /*******************************************************************************
 420  *
 421  * FUNCTION:    acpi_db_display_help
 422  *
 423  * PARAMETERS:  command             - Optional command string to display help.
 424  *                                    if not specified, all debugger command
 425  *                                    help strings are displayed
 426  *
 427  * RETURN:      None
 428  *
 429  * DESCRIPTION: Display help for a single debugger command, or all of them.
 430  *
 431  ******************************************************************************/
 432
 433 static void acpi_db_display_help(char *command)
 434 {
 435         const struct acpi_db_command_help *next = acpi_gbl_db_command_help;
 436
 437         if (!command) {
 438
 439                 /* No argument to help, display help for all commands */
 440
 441                 while (next->invocation) {
 442                         acpi_os_printf("%-38s%s", next->invocation,
 443                                        next->description);
 444                         next++;
 445                 }
 446         } else {
 447                 /* Display help for all commands that match the subtring */
 448
 449                 acpi_db_display_command_info(command, TRUE);
 450         }
 451 }
 452
 453 /*******************************************************************************
 454  *
 455  * FUNCTION:    acpi_db_get_next_token
 456  *
 457  * PARAMETERS:  string          - Command buffer
 458  *              next            - Return value, end of next token
 459  *
 460  * RETURN:      Pointer to the start of the next token.
 461  *
 462  * DESCRIPTION: Command line parsing. Get the next token on the command line
 463  *
 464  ******************************************************************************/
 465
 466 char *acpi_db_get_next_token(char *string,
 467                              char **next, acpi_object_type * return_type)
 468 {
 469         char *start;
 470         u32 depth;
 471         acpi_object_type type = ACPI_TYPE_INTEGER;
 472
 473         /* At end of buffer? */
 474
 475         if (!string || !(*string)) {
 476                 return (NULL);
 477         }
 478
 479         /* Remove any spaces at the beginning */
 480
 481         if (*string == ' ') {
 482                 while (*string && (*string == ' ')) {
 483                         string++;
 484                 }
 485
 486                 if (!(*string)) {
 487                         return (NULL);
 488                 }
 489         }
 490
 491         switch (*string) {
 492         case '"':
 493
 494                 /* This is a quoted string, scan until closing quote */
 495
 496                 string++;
 497                 start = string;
 498                 type = ACPI_TYPE_STRING;
 499
 500                 /* Find end of string */
 501
 502                 while (*string && (*string != '"')) {
 503                         string++;
 504                 }
 505                 break;
 506
 507         case '(':
 508
 509                 /* This is the start of a buffer, scan until closing paren */
 510
 511                 string++;
 512                 start = string;
 513                 type = ACPI_TYPE_BUFFER;
 514
 515                 /* Find end of buffer */
 516
 517                 while (*string && (*string != ')')) {
 518                         string++;
 519                 }
 520                 break;
 521
 522         case '[':
 523
 524                 /* This is the start of a package, scan until closing bracket */
 525
 526                 string++;
 527                 depth = 1;
 528                 start = string;
 529                 type = ACPI_TYPE_PACKAGE;
 530
 531                 /* Find end of package (closing bracket) */
 532
 533                 while (*string) {
 534
 535                         /* Handle String package elements */
 536
 537                         if (*string == '"') {
 538                                 /* Find end of string */
 539
 540                                 string++;
 541                                 while (*string && (*string != '"')) {
 542                                         string++;
 543                                 }
 544                                 if (!(*string)) {
 545                                         break;
 546                                 }
 547                         } else if (*string == '[') {
 548                                 depth++;        /* A nested package declaration */
 549                         } else if (*string == ']') {
 550                                 depth--;
 551                                 if (depth == 0) {       /* Found final package closing bracket */
 552                                         break;
 553                                 }
 554                         }
 555
 556                         string++;
 557                 }
 558                 break;
 559
 560         default:
 561
 562                 start = string;
 563
 564                 /* Find end of token */
 565
 566                 while (*string && (*string != ' ')) {
 567                         string++;
 568                 }
 569                 break;
 570         }
 571
 572         if (!(*string)) {
 573                 *next = NULL;
 574         } else {
 575                 *string = 0;
 576                 *next = string + 1;
 577         }
 578
 579         *return_type = type;
 580         return (start);
 581 }
 582
 583 /*******************************************************************************
 584  *
 585  * FUNCTION:    acpi_db_get_line
 586  *
 587  * PARAMETERS:  input_buffer        - Command line buffer
 588  *
 589  * RETURN:      Count of arguments to the command
 590  *
 591  * DESCRIPTION: Get the next command line from the user. Gets entire line
 592  *              up to the next newline
 593  *
 594  ******************************************************************************/
 595
 596 static u32 acpi_db_get_line(char *input_buffer)
 597 {
 598         u32 i;
 599         u32 count;
 600         char *next;
 601         char *this;
 602
 603         if (acpi_ut_safe_strcpy
 604             (acpi_gbl_db_parsed_buf, sizeof(acpi_gbl_db_parsed_buf),
 605              input_buffer)) {
 606                 acpi_os_printf
 607                     ("Buffer overflow while parsing input line (max %u characters)\n",
 608                      sizeof(acpi_gbl_db_parsed_buf));
 609                 return (0);
 610         }
 611
 612         this = acpi_gbl_db_parsed_buf;
 613         for (i = 0; i < ACPI_DEBUGGER_MAX_ARGS; i++) {
 614                 acpi_gbl_db_args[i] = acpi_db_get_next_token(this, &next,
 615                                                              &acpi_gbl_db_arg_types
 616                                                              [i]);
 617                 if (!acpi_gbl_db_args[i]) {
 618                         break;
 619                 }
 620
 621                 this = next;
 622         }
 623
 624         /* Uppercase the actual command */
 625
 626         if (acpi_gbl_db_args[0]) {
 627                 acpi_ut_strupr(acpi_gbl_db_args[0]);
 628         }
 629
 630         count = i;
 631         if (count) {
 632                 count--;        /* Number of args only */
 633         }
 634
 635         return (count);
 636 }
 637
 638 /*******************************************************************************
 639  *
 640  * FUNCTION:    acpi_db_match_command
 641  *
 642  * PARAMETERS:  user_command            - User command line
 643  *
 644  * RETURN:      Index into command array, -1 if not found
 645  *
 646  * DESCRIPTION: Search command array for a command match
 647  *
 648  ******************************************************************************/
 649
 650 static u32 acpi_db_match_command(char *user_command)
 651 {
 652         u32 i;
 653
 654         if (!user_command || user_command[0] == 0) {
 655                 return (CMD_NULL);
 656         }
 657
 658         for (i = CMD_FIRST_VALID; acpi_gbl_db_commands[i].name; i++) {
 659                 if (strstr(acpi_gbl_db_commands[i].name, user_command) ==
 660                     acpi_gbl_db_commands[i].name) {
 661                         return (i);
 662                 }
 663         }
 664
 665         /* Command not recognized */
 666
 667         return (CMD_NOT_FOUND);
 668 }
 669
 670 /*******************************************************************************
 671  *
 672  * FUNCTION:    acpi_db_command_dispatch
 673  *
 674  * PARAMETERS:  input_buffer        - Command line buffer
 675  *              walk_state          - Current walk
 676  *              op                  - Current (executing) parse op
 677  *
 678  * RETURN:      Status
 679  *
 680  * DESCRIPTION: Command dispatcher.
 681  *
 682  ******************************************************************************/
 683
 684 acpi_status
 685 acpi_db_command_dispatch(char *input_buffer,
 686                          struct acpi_walk_state * walk_state,
 687                          union acpi_parse_object * op)
 688 {
 689         u32 temp;
 690         u32 command_index;
 691         u32 param_count;
 692         char *command_line;
 693         acpi_status status = AE_CTRL_TRUE;
 694
 695         /* If acpi_terminate has been called, terminate this thread */
 696
 697         if (acpi_gbl_db_terminate_loop) {
 698                 return (AE_CTRL_TERMINATE);
 699         }
 700
 701         /* Find command and add to the history buffer */
 702
 703         param_count = acpi_db_get_line(input_buffer);
 704         command_index = acpi_db_match_command(acpi_gbl_db_args[0]);
 705         temp = 0;
 706
 707         /*
 708          * We don't want to add the !! command to the history buffer. It
 709          * would cause an infinite loop because it would always be the
 710          * previous command.
 711          */
 712         if (command_index != CMD_HISTORY_LAST) {
 713                 acpi_db_add_to_history(input_buffer);
 714         }
 715
 716         /* Verify that we have the minimum number of params */
 717
 718         if (param_count < acpi_gbl_db_commands[command_index].min_args) {
 719                 acpi_os_printf
 720                     ("%u parameters entered, [%s] requires %u parameters\n",
 721                      param_count, acpi_gbl_db_commands[command_index].name,
 722                      acpi_gbl_db_commands[command_index].min_args);
 723
 724                 acpi_db_display_command_info(acpi_gbl_db_commands
 725                                              [command_index].name, FALSE);
 726                 return (AE_CTRL_TRUE);
 727         }
 728
 729         /* Decode and dispatch the command */
 730
 731         switch (command_index) {
 732         case CMD_NULL:
 733
 734                 if (op) {
 735                         return (AE_OK);
 736                 }
 737                 break;
 738
 739         case CMD_ALLOCATIONS:
 740
 741 #ifdef ACPI_DBG_TRACK_ALLOCATIONS
 742                 acpi_ut_dump_allocations((u32)-1, NULL);
 743 #endif
 744                 break;
 745
 746         case CMD_ARGS:
 747         case CMD_ARGUMENTS:
 748
 749                 acpi_db_display_arguments();
 750                 break;
 751
 752         case CMD_BREAKPOINT:
 753
 754                 acpi_db_set_method_breakpoint(acpi_gbl_db_args[1], walk_state,
 755                                               op);
 756                 break;
 757
 758         case CMD_BUSINFO:
 759
 760                 acpi_db_get_bus_info();
 761                 break;
 762
 763         case CMD_CALL:
 764
 765                 acpi_db_set_method_call_breakpoint(op);
 766                 status = AE_OK;
 767                 break;
 768
 769         case CMD_DEBUG:
 770
 771                 acpi_db_execute(acpi_gbl_db_args[1],
 772                                 &acpi_gbl_db_args[2], &acpi_gbl_db_arg_types[2],
 773                                 EX_SINGLE_STEP);
 774                 break;
 775
 776         case CMD_DISASSEMBLE:
 777         case CMD_DISASM:
 778
 779                 (void)acpi_db_disassemble_method(acpi_gbl_db_args[1]);
 780                 break;
 781
 782         case CMD_DUMP:
 783
 784                 acpi_db_decode_and_display_object(acpi_gbl_db_args[1],
 785                                                   acpi_gbl_db_args[2]);
 786                 break;
 787
 788         case CMD_EVALUATE:
 789         case CMD_EXECUTE:
 790
 791                 acpi_db_execute(acpi_gbl_db_args[1],
 792                                 &acpi_gbl_db_args[2], &acpi_gbl_db_arg_types[2],
 793                                 EX_NO_SINGLE_STEP);
 794                 break;
 795
 796         case CMD_FIND:
 797
 798                 status = acpi_db_find_name_in_namespace(acpi_gbl_db_args[1]);
 799                 break;
 800
 801         case CMD_GO:
 802
 803                 acpi_gbl_cm_single_step = FALSE;
 804                 return (AE_OK);
 805
 806         case CMD_HANDLERS:
 807
 808                 acpi_db_display_handlers();
 809                 break;
 810
 811         case CMD_HELP:
 812         case CMD_HELP2:
 813
 814                 acpi_db_display_help(acpi_gbl_db_args[1]);
 815                 break;
 816
 817         case CMD_HISTORY:
 818
 819                 acpi_db_display_history();
 820                 break;
 821
 822         case CMD_HISTORY_EXE:   /* ! command */
 823
 824                 command_line = acpi_db_get_from_history(acpi_gbl_db_args[1]);
 825                 if (!command_line) {
 826                         return (AE_CTRL_TRUE);
 827                 }
 828
 829                 status = acpi_db_command_dispatch(command_line, walk_state, op);
 830                 return (status);
 831
 832         case CMD_HISTORY_LAST:  /* !! command */
 833
 834                 command_line = acpi_db_get_from_history(NULL);
 835                 if (!command_line) {
 836                         return (AE_CTRL_TRUE);
 837                 }
 838
 839                 status = acpi_db_command_dispatch(command_line, walk_state, op);
 840                 return (status);
 841
 842         case CMD_INFORMATION:
 843
 844                 acpi_db_display_method_info(op);
 845                 break;
 846
 847         case CMD_INTEGRITY:
 848
 849                 acpi_db_check_integrity();
 850                 break;
 851
 852         case CMD_INTO:
 853
 854                 if (op) {
 855                         acpi_gbl_cm_single_step = TRUE;
 856                         return (AE_OK);
 857                 }
 858                 break;
 859
 860         case CMD_LEVEL:
 861
 862                 if (param_count == 0) {
 863                         acpi_os_printf
 864                             ("Current debug level for file output is:    %8.8lX\n",
 865                              acpi_gbl_db_debug_level);
 866                         acpi_os_printf
 867                             ("Current debug level for console output is: %8.8lX\n",
 868                              acpi_gbl_db_console_debug_level);
 869                 } else if (param_count == 2) {
 870                         temp = acpi_gbl_db_console_debug_level;
 871                         acpi_gbl_db_console_debug_level =
 872                             strtoul(acpi_gbl_db_args[1], NULL, 16);
 873                         acpi_os_printf
 874                             ("Debug Level for console output was %8.8lX, now %8.8lX\n",
 875                              temp, acpi_gbl_db_console_debug_level);
 876                 } else {
 877                         temp = acpi_gbl_db_debug_level;
 878                         acpi_gbl_db_debug_level =
 879                             strtoul(acpi_gbl_db_args[1], NULL, 16);
 880                         acpi_os_printf
 881                             ("Debug Level for file output was %8.8lX, now %8.8lX\n",
 882                              temp, acpi_gbl_db_debug_level);
 883                 }
 884                 break;
 885
 886         case CMD_LIST:
 887
 888                 acpi_db_disassemble_aml(acpi_gbl_db_args[1], op);
 889                 break;
 890
 891         case CMD_LOCKS:
 892
 893                 acpi_db_display_locks();
 894                 break;
 895
 896         case CMD_LOCALS:
 897
 898                 acpi_db_display_locals();
 899                 break;
 900
 901         case CMD_METHODS:
 902
 903                 status = acpi_db_display_objects("METHOD", acpi_gbl_db_args[1]);
 904                 break;
 905
 906         case CMD_NAMESPACE:
 907
 908                 acpi_db_dump_namespace(acpi_gbl_db_args[1],
 909                                        acpi_gbl_db_args[2]);
 910                 break;
 911
 912         case CMD_NOTIFY:
 913
 914                 temp = strtoul(acpi_gbl_db_args[2], NULL, 0);
 915                 acpi_db_send_notify(acpi_gbl_db_args[1], temp);
 916                 break;
 917
 918         case CMD_OBJECTS:
 919
 920                 acpi_ut_strupr(acpi_gbl_db_args[1]);
 921                 status =
 922                     acpi_db_display_objects(acpi_gbl_db_args[1],
 923                                             acpi_gbl_db_args[2]);
 924                 break;
 925
 926         case CMD_OSI:
 927
 928                 acpi_db_display_interfaces(acpi_gbl_db_args[1],
 929                                            acpi_gbl_db_args[2]);
 930                 break;
 931
 932         case CMD_OWNER:
 933
 934                 acpi_db_dump_namespace_by_owner(acpi_gbl_db_args[1],
 935                                                 acpi_gbl_db_args[2]);
 936                 break;
 937
 938         case CMD_PATHS:
 939
 940                 acpi_db_dump_namespace_paths();
 941                 break;
 942
 943         case CMD_PREFIX:
 944
 945                 acpi_db_set_scope(acpi_gbl_db_args[1]);
 946                 break;
 947
 948         case CMD_REFERENCES:
 949
 950                 acpi_db_find_references(acpi_gbl_db_args[1]);
 951                 break;
 952
 953         case CMD_RESOURCES:
 954
 955                 acpi_db_display_resources(acpi_gbl_db_args[1]);
 956                 break;
 957
 958         case CMD_RESULTS:
 959
 960                 acpi_db_display_results();
 961                 break;
 962
 963         case CMD_SET:
 964
 965                 acpi_db_set_method_data(acpi_gbl_db_args[1],
 966                                         acpi_gbl_db_args[2],
 967                                         acpi_gbl_db_args[3]);
 968                 break;
 969
 970         case CMD_STATS:
 971
 972                 status = acpi_db_display_statistics(acpi_gbl_db_args[1]);
 973                 break;
 974
 975         case CMD_STOP:
 976
 977                 return (AE_NOT_IMPLEMENTED);
 978
 979         case CMD_TABLES:
 980
 981                 acpi_db_display_table_info(acpi_gbl_db_args[1]);
 982                 break;
 983
 984         case CMD_TEMPLATE:
 985
 986                 acpi_db_display_template(acpi_gbl_db_args[1]);
 987                 break;
 988
 989         case CMD_TRACE:
 990
 991                 acpi_db_trace(acpi_gbl_db_args[1], acpi_gbl_db_args[2],
 992                               acpi_gbl_db_args[3]);
 993                 break;
 994
 995         case CMD_TREE:
 996
 997                 acpi_db_display_calling_tree();
 998                 break;
 999
1000         case CMD_TYPE:
1001
1002                 acpi_db_display_object_type(acpi_gbl_db_args[1]);
1003                 break;
1004
1005 #ifdef ACPI_APPLICATION
1006
1007                 /* Hardware simulation commands. */
1008
1009         case CMD_ENABLEACPI:
1010 #if (!ACPI_REDUCED_HARDWARE)
1011
1012                 status = acpi_enable();
1013                 if (ACPI_FAILURE(status)) {
1014                         acpi_os_printf("AcpiEnable failed (Status=%X)\n",
1015                                        status);
1016                         return (status);
1017                 }
1018 #endif                          /* !ACPI_REDUCED_HARDWARE */
1019                 break;
1020
1021         case CMD_EVENT:
1022
1023                 acpi_os_printf("Event command not implemented\n");
1024                 break;
1025
1026         case CMD_GPE:
1027
1028                 acpi_db_generate_gpe(acpi_gbl_db_args[1], acpi_gbl_db_args[2]);
1029                 break;
1030
1031         case CMD_GPES:
1032
1033                 acpi_db_display_gpes();
1034                 break;
1035
1036         case CMD_SCI:
1037
1038                 acpi_db_generate_sci();
1039                 break;
1040
1041         case CMD_SLEEP:
1042
1043                 status = acpi_db_sleep(acpi_gbl_db_args[1]);
1044                 break;
1045
1046                 /* File I/O commands. */
1047
1048         case CMD_CLOSE:
1049
1050                 acpi_db_close_debug_file();
1051                 break;
1052
1053         case CMD_LOAD:
1054
1055                 status =
1056                     acpi_db_get_table_from_file(acpi_gbl_db_args[1], NULL,
1057                                                 FALSE);
1058                 break;
1059
1060         case CMD_OPEN:
1061
1062                 acpi_db_open_debug_file(acpi_gbl_db_args[1]);
1063                 break;
1064
1065                 /* User space commands. */
1066
1067         case CMD_TERMINATE:
1068
1069                 acpi_db_set_output_destination(ACPI_DB_REDIRECTABLE_OUTPUT);
1070                 acpi_ut_subsystem_shutdown();
1071
1072                 /*
1073                  * TBD: [Restructure] Need some way to re-initialize without
1074                  * re-creating the semaphores!
1075                  */
1076
1077                 acpi_gbl_db_terminate_loop = TRUE;
1078                 /*  acpi_initialize (NULL); */
1079                 break;
1080
1081         case CMD_THREADS:
1082
1083                 acpi_db_create_execution_threads(acpi_gbl_db_args[1],
1084                                                  acpi_gbl_db_args[2],
1085                                                  acpi_gbl_db_args[3]);
1086                 break;
1087
1088                 /* Debug test commands. */
1089
1090         case CMD_PREDEFINED:
1091
1092                 acpi_db_check_predefined_names();
1093                 break;
1094
1095         case CMD_TEST:
1096
1097                 acpi_db_execute_test(acpi_gbl_db_args[1]);
1098                 break;
1099
1100         case CMD_UNLOAD:
1101
1102                 acpi_db_unload_acpi_table(acpi_gbl_db_args[1]);
1103                 break;
1104 #endif
1105
1106         case CMD_EXIT:
1107         case CMD_QUIT:
1108
1109                 if (op) {
1110                         acpi_os_printf("Method execution terminated\n");
1111                         return (AE_CTRL_TERMINATE);
1112                 }
1113
1114                 if (!acpi_gbl_db_output_to_file) {
1115                         acpi_dbg_level = ACPI_DEBUG_DEFAULT;
1116                 }
1117 #ifdef ACPI_APPLICATION
1118                 acpi_db_close_debug_file();
1119 #endif
1120                 acpi_gbl_db_terminate_loop = TRUE;
1121                 return (AE_CTRL_TERMINATE);
1122
1123         case CMD_NOT_FOUND:
1124         default:
1125
1126                 acpi_os_printf("%s: unknown command\n", acpi_gbl_db_args[0]);
1127                 return (AE_CTRL_TRUE);
1128         }
1129
1130         if (ACPI_SUCCESS(status)) {
1131                 status = AE_CTRL_TRUE;
1132         }
1133
1134         return (status);
1135 }
1136
1137 /*******************************************************************************
1138  *
1139  * FUNCTION:    acpi_db_execute_thread
1140  *
1141  * PARAMETERS:  context         - Not used
1142  *
1143  * RETURN:      None
1144  *
1145  * DESCRIPTION: Debugger execute thread. Waits for a command line, then
1146  *              simply dispatches it.
1147  *
1148  ******************************************************************************/
1149
1150 void ACPI_SYSTEM_XFACE acpi_db_execute_thread(void *context)
1151 {
1152         acpi_status status = AE_OK;
1153         acpi_status Mstatus;
1154
1155         while (status != AE_CTRL_TERMINATE && !acpi_gbl_db_terminate_loop) {
1156                 acpi_gbl_method_executing = FALSE;
1157                 acpi_gbl_step_to_next_call = FALSE;
1158
1159                 Mstatus = acpi_os_acquire_mutex(acpi_gbl_db_command_ready,
1160                                                 ACPI_WAIT_FOREVER);
1161                 if (ACPI_FAILURE(Mstatus)) {
1162                         return;
1163                 }
1164
1165                 status =
1166                     acpi_db_command_dispatch(acpi_gbl_db_line_buf, NULL, NULL);
1167
1168                 acpi_os_release_mutex(acpi_gbl_db_command_complete);
1169         }
1170         acpi_gbl_db_threads_terminated = TRUE;
1171 }
1172
1173 /*******************************************************************************
1174  *
1175  * FUNCTION:    acpi_db_single_thread
1176  *
1177  * PARAMETERS:  None
1178  *
1179  * RETURN:      None
1180  *
1181  * DESCRIPTION: Debugger execute thread. Waits for a command line, then
1182  *              simply dispatches it.
1183  *
1184  ******************************************************************************/
1185
1186 static void acpi_db_single_thread(void)
1187 {
1188
1189         acpi_gbl_method_executing = FALSE;
1190         acpi_gbl_step_to_next_call = FALSE;
1191
1192         (void)acpi_db_command_dispatch(acpi_gbl_db_line_buf, NULL, NULL);
1193 }
1194
1195 /*******************************************************************************
1196  *
1197  * FUNCTION:    acpi_db_user_commands
1198  *
1199  * PARAMETERS:  prompt              - User prompt (depends on mode)
1200  *              op                  - Current executing parse op
1201  *
1202  * RETURN:      None
1203  *
1204  * DESCRIPTION: Command line execution for the AML debugger. Commands are
1205  *              matched and dispatched here.
1206  *
1207  ******************************************************************************/
1208
1209 acpi_status acpi_db_user_commands(char prompt, union acpi_parse_object *op)
1210 {
1211         acpi_status status = AE_OK;
1212
1213         acpi_os_printf("\n");
1214
1215         /* TBD: [Restructure] Need a separate command line buffer for step mode */
1216
1217         while (!acpi_gbl_db_terminate_loop) {
1218
1219                 /* Force output to console until a command is entered */
1220
1221                 acpi_db_set_output_destination(ACPI_DB_CONSOLE_OUTPUT);
1222
1223                 /* Different prompt if method is executing */
1224
1225                 if (!acpi_gbl_method_executing) {
1226                         acpi_os_printf("%1c ", ACPI_DEBUGGER_COMMAND_PROMPT);
1227                 } else {
1228                         acpi_os_printf("%1c ", ACPI_DEBUGGER_EXECUTE_PROMPT);
1229                 }
1230
1231                 /* Get the user input line */
1232
1233                 status = acpi_os_get_line(acpi_gbl_db_line_buf,
1234                                           ACPI_DB_LINE_BUFFER_SIZE, NULL);
1235                 if (ACPI_FAILURE(status)) {
1236                         ACPI_EXCEPTION((AE_INFO, status,
1237                                         "While parsing command line"));
1238                         return (status);
1239                 }
1240
1241                 /* Check for single or multithreaded debug */
1242
1243                 if (acpi_gbl_debugger_configuration & DEBUGGER_MULTI_THREADED) {
1244                         /*
1245                          * Signal the debug thread that we have a command to execute,
1246                          * and wait for the command to complete.
1247                          */
1248                         acpi_os_release_mutex(acpi_gbl_db_command_ready);
1249                         if (ACPI_FAILURE(status)) {
1250                                 return (status);
1251                         }
1252
1253                         status =
1254                             acpi_os_acquire_mutex(acpi_gbl_db_command_complete,
1255                                                   ACPI_WAIT_FOREVER);
1256                         if (ACPI_FAILURE(status)) {
1257                                 return (status);
1258                         }
1259                 } else {
1260                         /* Just call to the command line interpreter */
1261
1262                         acpi_db_single_thread();
1263                 }
1264         }
1265
1266         return (status);
1267 }