kernel/arch/xtensa/kernel/setup.c

   1 /*
   2  * arch/xtensa/kernel/setup.c
   3  *
   4  * This file is subject to the terms and conditions of the GNU General Public
   5  * License.  See the file "COPYING" in the main directory of this archive
   6  * for more details.
   7  *
   8  * Copyright (C) 1995  Linus Torvalds
   9  * Copyright (C) 2001 - 2005  Tensilica Inc.
  10  *
  11  * Chris Zankel <chris@zankel.net>
  12  * Joe Taylor   <joe@tensilica.com, joetylr@yahoo.com>
  13  * Kevin Chea
  14  * Marc Gauthier<marc@tensilica.com> <marc@alumni.uwaterloo.ca>
  15  */
  16
  17 #include <linux/errno.h>
  18 #include <linux/init.h>
  19 #include <linux/mm.h>
  20 #include <linux/proc_fs.h>
  21 #include <linux/screen_info.h>
  22 #include <linux/bootmem.h>
  23 #include <linux/kernel.h>
  24 #include <linux/percpu.h>
  25 #include <linux/clk-provider.h>
  26 #include <linux/cpu.h>
  27 #include <linux/of_fdt.h>
  28 #include <linux/of_platform.h>
  29
  30 #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
  31 # include <linux/console.h>
  32 #endif
  33
  34 #ifdef CONFIG_RTC
  35 # include <linux/timex.h>
  36 #endif
  37
  38 #ifdef CONFIG_PROC_FS
  39 # include <linux/seq_file.h>
  40 #endif
  41
  42 #include <asm/bootparam.h>
  43 #include <asm/mmu_context.h>
  44 #include <asm/pgtable.h>
  45 #include <asm/processor.h>
  46 #include <asm/timex.h>
  47 #include <asm/platform.h>
  48 #include <asm/page.h>
  49 #include <asm/setup.h>
  50 #include <asm/param.h>
  51 #include <asm/traps.h>
  52 #include <asm/smp.h>
  53 #include <asm/sysmem.h>
  54
  55 #include <platform/hardware.h>
  56
  57 #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
  58 struct screen_info screen_info = { 0, 24, 0, 0, 0, 80, 0, 0, 0, 24, 1, 16};
  59 #endif
  60
  61 #ifdef CONFIG_BLK_DEV_FD
  62 extern struct fd_ops no_fd_ops;
  63 struct fd_ops *fd_ops;
  64 #endif
  65
  66 extern struct rtc_ops no_rtc_ops;
  67 struct rtc_ops *rtc_ops;
  68
  69 #ifdef CONFIG_BLK_DEV_INITRD
  70 extern unsigned long initrd_start;
  71 extern unsigned long initrd_end;
  72 int initrd_is_mapped = 0;
  73 extern int initrd_below_start_ok;
  74 #endif
  75
  76 #ifdef CONFIG_OF
  77 void *dtb_start = __dtb_start;
  78 #endif
  79
  80 unsigned char aux_device_present;
  81 extern unsigned long loops_per_jiffy;
  82
  83 /* Command line specified as configuration option. */
  84
  85 static char __initdata command_line[COMMAND_LINE_SIZE];
  86
  87 #ifdef CONFIG_CMDLINE_BOOL
  88 static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
  89 #endif
  90
  91 /*
  92  * Boot parameter parsing.
  93  *
  94  * The Xtensa port uses a list of variable-sized tags to pass data to
  95  * the kernel. The first tag must be a BP_TAG_FIRST tag for the list
  96  * to be recognised. The list is terminated with a zero-sized
  97  * BP_TAG_LAST tag.
  98  */
  99
 100 typedef struct tagtable {
 101         u32 tag;
 102         int (*parse)(const bp_tag_t*);
 103 } tagtable_t;
 104
 105 #define __tagtable(tag, fn) static tagtable_t __tagtable_##fn           \
 106         __attribute__((used, section(".taglist"))) = { tag, fn }
 107
 108 /* parse current tag */
 109
 110 static int __init parse_tag_mem(const bp_tag_t *tag)
 111 {
 112         struct bp_meminfo *mi = (struct bp_meminfo *)(tag->data);
 113
 114         if (mi->type != MEMORY_TYPE_CONVENTIONAL)
 115                 return -1;
 116
 117         return add_sysmem_bank(mi->start, mi->end);
 118 }
 119
 120 __tagtable(BP_TAG_MEMORY, parse_tag_mem);
 121
 122 #ifdef CONFIG_BLK_DEV_INITRD
 123
 124 static int __init parse_tag_initrd(const bp_tag_t* tag)
 125 {
 126         struct bp_meminfo *mi = (struct bp_meminfo *)(tag->data);
 127
 128         initrd_start = (unsigned long)__va(mi->start);
 129         initrd_end = (unsigned long)__va(mi->end);
 130
 131         return 0;
 132 }
 133
 134 __tagtable(BP_TAG_INITRD, parse_tag_initrd);
 135
 136 #ifdef CONFIG_OF
 137
 138 static int __init parse_tag_fdt(const bp_tag_t *tag)
 139 {
 140         dtb_start = __va(tag->data[0]);
 141         return 0;
 142 }
 143
 144 __tagtable(BP_TAG_FDT, parse_tag_fdt);
 145
 146 #endif /* CONFIG_OF */
 147
 148 #endif /* CONFIG_BLK_DEV_INITRD */
 149
 150 static int __init parse_tag_cmdline(const bp_tag_t* tag)
 151 {
 152         strlcpy(command_line, (char *)(tag->data), COMMAND_LINE_SIZE);
 153         return 0;
 154 }
 155
 156 __tagtable(BP_TAG_COMMAND_LINE, parse_tag_cmdline);
 157
 158 static int __init parse_bootparam(const bp_tag_t* tag)
 159 {
 160         extern tagtable_t __tagtable_begin, __tagtable_end;
 161         tagtable_t *t;
 162
 163         /* Boot parameters must start with a BP_TAG_FIRST tag. */
 164
 165         if (tag->id != BP_TAG_FIRST) {
 166                 printk(KERN_WARNING "Invalid boot parameters!\n");
 167                 return 0;
 168         }
 169
 170         tag = (bp_tag_t*)((unsigned long)tag + sizeof(bp_tag_t) + tag->size);
 171
 172         /* Parse all tags. */
 173
 174         while (tag != NULL && tag->id != BP_TAG_LAST) {
 175                 for (t = &__tagtable_begin; t < &__tagtable_end; t++) {
 176                         if (tag->id == t->tag) {
 177                                 t->parse(tag);
 178                                 break;
 179                         }
 180                 }
 181                 if (t == &__tagtable_end)
 182                         printk(KERN_WARNING "Ignoring tag "
 183                                "0x%08x\n", tag->id);
 184                 tag = (bp_tag_t*)((unsigned long)(tag + 1) + tag->size);
 185         }
 186
 187         return 0;
 188 }
 189
 190 #ifdef CONFIG_OF
 191 bool __initdata dt_memory_scan = false;
 192
 193 #if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY
 194 unsigned long xtensa_kio_paddr = XCHAL_KIO_DEFAULT_PADDR;
 195 EXPORT_SYMBOL(xtensa_kio_paddr);
 196
 197 static int __init xtensa_dt_io_area(unsigned long node, const char *uname,
 198                 int depth, void *data)
 199 {
 200         const __be32 *ranges;
 201         int len;
 202
 203         if (depth > 1)
 204                 return 0;
 205
 206         if (!of_flat_dt_is_compatible(node, "simple-bus"))
 207                 return 0;
 208
 209         ranges = of_get_flat_dt_prop(node, "ranges", &len);
 210         if (!ranges)
 211                 return 1;
 212         if (len == 0)
 213                 return 1;
 214
 215         xtensa_kio_paddr = of_read_ulong(ranges+1, 1);
 216         /* round down to nearest 256MB boundary */
 217         xtensa_kio_paddr &= 0xf0000000;
 218
 219         return 1;
 220 }
 221 #else
 222 static int __init xtensa_dt_io_area(unsigned long node, const char *uname,
 223                 int depth, void *data)
 224 {
 225         return 1;
 226 }
 227 #endif
 228
 229 void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 230 {
 231         if (!dt_memory_scan)
 232                 return;
 233
 234         size &= PAGE_MASK;
 235         add_sysmem_bank(base, base + size);
 236 }
 237
 238 void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
 239 {
 240         return __alloc_bootmem(size, align, 0);
 241 }
 242
 243 void __init early_init_devtree(void *params)
 244 {
 245         if (sysmem.nr_banks == 0)
 246                 dt_memory_scan = true;
 247
 248         early_init_dt_scan(params);
 249         of_scan_flat_dt(xtensa_dt_io_area, NULL);
 250
 251         if (!command_line[0])
 252                 strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
 253 }
 254
 255 static int __init xtensa_device_probe(void)
 256 {
 257         of_clk_init(NULL);
 258         of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 259         return 0;
 260 }
 261
 262 device_initcall(xtensa_device_probe);
 263
 264 #endif /* CONFIG_OF */
 265
 266 /*
 267  * Initialize architecture. (Early stage)
 268  */
 269
 270 void __init init_arch(bp_tag_t *bp_start)
 271 {
 272         /* Parse boot parameters */
 273
 274         if (bp_start)
 275                 parse_bootparam(bp_start);
 276
 277 #ifdef CONFIG_OF
 278         early_init_devtree(dtb_start);
 279 #endif
 280
 281         if (sysmem.nr_banks == 0) {
 282                 add_sysmem_bank(PLATFORM_DEFAULT_MEM_START,
 283                                 PLATFORM_DEFAULT_MEM_START +
 284                                 PLATFORM_DEFAULT_MEM_SIZE);
 285         }
 286
 287 #ifdef CONFIG_CMDLINE_BOOL
 288         if (!command_line[0])
 289                 strlcpy(command_line, default_command_line, COMMAND_LINE_SIZE);
 290 #endif
 291
 292         /* Early hook for platforms */
 293
 294         platform_init(bp_start);
 295
 296         /* Initialize MMU. */
 297
 298         init_mmu();
 299 }
 300
 301 /*
 302  * Initialize system. Setup memory and reserve regions.
 303  */
 304
 305 extern char _end;
 306 extern char _stext;
 307 extern char _WindowVectors_text_start;
 308 extern char _WindowVectors_text_end;
 309 extern char _DebugInterruptVector_literal_start;
 310 extern char _DebugInterruptVector_text_end;
 311 extern char _KernelExceptionVector_literal_start;
 312 extern char _KernelExceptionVector_text_end;
 313 extern char _UserExceptionVector_literal_start;
 314 extern char _UserExceptionVector_text_end;
 315 extern char _DoubleExceptionVector_literal_start;
 316 extern char _DoubleExceptionVector_text_end;
 317 #if XCHAL_EXCM_LEVEL >= 2
 318 extern char _Level2InterruptVector_text_start;
 319 extern char _Level2InterruptVector_text_end;
 320 #endif
 321 #if XCHAL_EXCM_LEVEL >= 3
 322 extern char _Level3InterruptVector_text_start;
 323 extern char _Level3InterruptVector_text_end;
 324 #endif
 325 #if XCHAL_EXCM_LEVEL >= 4
 326 extern char _Level4InterruptVector_text_start;
 327 extern char _Level4InterruptVector_text_end;
 328 #endif
 329 #if XCHAL_EXCM_LEVEL >= 5
 330 extern char _Level5InterruptVector_text_start;
 331 extern char _Level5InterruptVector_text_end;
 332 #endif
 333 #if XCHAL_EXCM_LEVEL >= 6
 334 extern char _Level6InterruptVector_text_start;
 335 extern char _Level6InterruptVector_text_end;
 336 #endif
 337
 338
 339
 340 #ifdef CONFIG_S32C1I_SELFTEST
 341 #if XCHAL_HAVE_S32C1I
 342
 343 static int __initdata rcw_word, rcw_probe_pc, rcw_exc;
 344
 345 /*
 346  * Basic atomic compare-and-swap, that records PC of S32C1I for probing.
 347  *
 348  * If *v == cmp, set *v = set.  Return previous *v.
 349  */
 350 static inline int probed_compare_swap(int *v, int cmp, int set)
 351 {
 352         int tmp;
 353
 354         __asm__ __volatile__(
 355                         "       movi    %1, 1f\n"
 356                         "       s32i    %1, %4, 0\n"
 357                         "       wsr     %2, scompare1\n"
 358                         "1:     s32c1i  %0, %3, 0\n"
 359                         : "=a" (set), "=&a" (tmp)
 360                         : "a" (cmp), "a" (v), "a" (&rcw_probe_pc), "0" (set)
 361                         : "memory"
 362                         );
 363         return set;
 364 }
 365
 366 /* Handle probed exception */
 367
 368 static void __init do_probed_exception(struct pt_regs *regs,
 369                 unsigned long exccause)
 370 {
 371         if (regs->pc == rcw_probe_pc) { /* exception on s32c1i ? */
 372                 regs->pc += 3;          /* skip the s32c1i instruction */
 373                 rcw_exc = exccause;
 374         } else {
 375                 do_unhandled(regs, exccause);
 376         }
 377 }
 378
 379 /* Simple test of S32C1I (soc bringup assist) */
 380
 381 static int __init check_s32c1i(void)
 382 {
 383         int n, cause1, cause2;
 384         void *handbus, *handdata, *handaddr; /* temporarily saved handlers */
 385
 386         rcw_probe_pc = 0;
 387         handbus  = trap_set_handler(EXCCAUSE_LOAD_STORE_ERROR,
 388                         do_probed_exception);
 389         handdata = trap_set_handler(EXCCAUSE_LOAD_STORE_DATA_ERROR,
 390                         do_probed_exception);
 391         handaddr = trap_set_handler(EXCCAUSE_LOAD_STORE_ADDR_ERROR,
 392                         do_probed_exception);
 393
 394         /* First try an S32C1I that does not store: */
 395         rcw_exc = 0;
 396         rcw_word = 1;
 397         n = probed_compare_swap(&rcw_word, 0, 2);
 398         cause1 = rcw_exc;
 399
 400         /* took exception? */
 401         if (cause1 != 0) {
 402                 /* unclean exception? */
 403                 if (n != 2 || rcw_word != 1)
 404                         panic("S32C1I exception error");
 405         } else if (rcw_word != 1 || n != 1) {
 406                 panic("S32C1I compare error");
 407         }
 408
 409         /* Then an S32C1I that stores: */
 410         rcw_exc = 0;
 411         rcw_word = 0x1234567;
 412         n = probed_compare_swap(&rcw_word, 0x1234567, 0xabcde);
 413         cause2 = rcw_exc;
 414
 415         if (cause2 != 0) {
 416                 /* unclean exception? */
 417                 if (n != 0xabcde || rcw_word != 0x1234567)
 418                         panic("S32C1I exception error (b)");
 419         } else if (rcw_word != 0xabcde || n != 0x1234567) {
 420                 panic("S32C1I store error");
 421         }
 422
 423         /* Verify consistency of exceptions: */
 424         if (cause1 || cause2) {
 425                 pr_warn("S32C1I took exception %d, %d\n", cause1, cause2);
 426                 /* If emulation of S32C1I upon bus error gets implemented,
 427                    we can get rid of this panic for single core (not SMP) */
 428                 panic("S32C1I exceptions not currently supported");
 429         }
 430         if (cause1 != cause2)
 431                 panic("inconsistent S32C1I exceptions");
 432
 433         trap_set_handler(EXCCAUSE_LOAD_STORE_ERROR, handbus);
 434         trap_set_handler(EXCCAUSE_LOAD_STORE_DATA_ERROR, handdata);
 435         trap_set_handler(EXCCAUSE_LOAD_STORE_ADDR_ERROR, handaddr);
 436         return 0;
 437 }
 438
 439 #else /* XCHAL_HAVE_S32C1I */
 440
 441 /* This condition should not occur with a commercially deployed processor.
 442    Display reminder for early engr test or demo chips / FPGA bitstreams */
 443 static int __init check_s32c1i(void)
 444 {
 445         pr_warn("Processor configuration lacks atomic compare-and-swap support!\n");
 446         return 0;
 447 }
 448
 449 #endif /* XCHAL_HAVE_S32C1I */
 450 early_initcall(check_s32c1i);
 451 #endif /* CONFIG_S32C1I_SELFTEST */
 452
 453
 454 void __init setup_arch(char **cmdline_p)
 455 {
 456         strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
 457         *cmdline_p = command_line;
 458
 459         /* Reserve some memory regions */
 460
 461 #ifdef CONFIG_BLK_DEV_INITRD
 462         if (initrd_start < initrd_end) {
 463                 initrd_is_mapped = mem_reserve(__pa(initrd_start),
 464                                                __pa(initrd_end), 0) == 0;
 465                 initrd_below_start_ok = 1;
 466         } else {
 467                 initrd_start = 0;
 468         }
 469 #endif
 470
 471         mem_reserve(__pa(&_stext),__pa(&_end), 1);
 472
 473         mem_reserve(__pa(&_WindowVectors_text_start),
 474                     __pa(&_WindowVectors_text_end), 0);
 475
 476         mem_reserve(__pa(&_DebugInterruptVector_literal_start),
 477                     __pa(&_DebugInterruptVector_text_end), 0);
 478
 479         mem_reserve(__pa(&_KernelExceptionVector_literal_start),
 480                     __pa(&_KernelExceptionVector_text_end), 0);
 481
 482         mem_reserve(__pa(&_UserExceptionVector_literal_start),
 483                     __pa(&_UserExceptionVector_text_end), 0);
 484
 485         mem_reserve(__pa(&_DoubleExceptionVector_literal_start),
 486                     __pa(&_DoubleExceptionVector_text_end), 0);
 487
 488 #if XCHAL_EXCM_LEVEL >= 2
 489         mem_reserve(__pa(&_Level2InterruptVector_text_start),
 490                     __pa(&_Level2InterruptVector_text_end), 0);
 491 #endif
 492 #if XCHAL_EXCM_LEVEL >= 3
 493         mem_reserve(__pa(&_Level3InterruptVector_text_start),
 494                     __pa(&_Level3InterruptVector_text_end), 0);
 495 #endif
 496 #if XCHAL_EXCM_LEVEL >= 4
 497         mem_reserve(__pa(&_Level4InterruptVector_text_start),
 498                     __pa(&_Level4InterruptVector_text_end), 0);
 499 #endif
 500 #if XCHAL_EXCM_LEVEL >= 5
 501         mem_reserve(__pa(&_Level5InterruptVector_text_start),
 502                     __pa(&_Level5InterruptVector_text_end), 0);
 503 #endif
 504 #if XCHAL_EXCM_LEVEL >= 6
 505         mem_reserve(__pa(&_Level6InterruptVector_text_start),
 506                     __pa(&_Level6InterruptVector_text_end), 0);
 507 #endif
 508
 509         parse_early_param();
 510         bootmem_init();
 511
 512         unflatten_and_copy_device_tree();
 513
 514         platform_setup(cmdline_p);
 515
 516 #ifdef CONFIG_SMP
 517         smp_init_cpus();
 518 #endif
 519
 520         paging_init();
 521         zones_init();
 522
 523 #ifdef CONFIG_VT
 524 # if defined(CONFIG_VGA_CONSOLE)
 525         conswitchp = &vga_con;
 526 # elif defined(CONFIG_DUMMY_CONSOLE)
 527         conswitchp = &dummy_con;
 528 # endif
 529 #endif
 530
 531 #ifdef CONFIG_PCI
 532         platform_pcibios_init();
 533 #endif
 534 }
 535
 536 static DEFINE_PER_CPU(struct cpu, cpu_data);
 537
 538 static int __init topology_init(void)
 539 {
 540         int i;
 541
 542         for_each_possible_cpu(i) {
 543                 struct cpu *cpu = &per_cpu(cpu_data, i);
 544                 cpu->hotpluggable = !!i;
 545                 register_cpu(cpu, i);
 546         }
 547
 548         return 0;
 549 }
 550 subsys_initcall(topology_init);
 551
 552 void machine_restart(char * cmd)
 553 {
 554         platform_restart();
 555 }
 556
 557 void machine_halt(void)
 558 {
 559         platform_halt();
 560         while (1);
 561 }
 562
 563 void machine_power_off(void)
 564 {
 565         platform_power_off();
 566         while (1);
 567 }
 568 #ifdef CONFIG_PROC_FS
 569
 570 /*
 571  * Display some core information through /proc/cpuinfo.
 572  */
 573
 574 static int
 575 c_show(struct seq_file *f, void *slot)
 576 {
 577         /* high-level stuff */
 578         seq_printf(f, "CPU count\t: %u\n"
 579                       "CPU list\t: %*pbl\n"
 580                       "vendor_id\t: Tensilica\n"
 581                       "model\t\t: Xtensa " XCHAL_HW_VERSION_NAME "\n"
 582                       "core ID\t\t: " XCHAL_CORE_ID "\n"
 583                       "build ID\t: 0x%x\n"
 584                       "byte order\t: %s\n"
 585                       "cpu MHz\t\t: %lu.%02lu\n"
 586                       "bogomips\t: %lu.%02lu\n",
 587                       num_online_cpus(),
 588                       cpumask_pr_args(cpu_online_mask),
 589                       XCHAL_BUILD_UNIQUE_ID,
 590                       XCHAL_HAVE_BE ?  "big" : "little",
 591                       ccount_freq/1000000,
 592                       (ccount_freq/10000) % 100,
 593                       loops_per_jiffy/(500000/HZ),
 594                       (loops_per_jiffy/(5000/HZ)) % 100);
 595
 596         seq_printf(f,"flags\t\t: "
 597 #if XCHAL_HAVE_NMI
 598                      "nmi "
 599 #endif
 600 #if XCHAL_HAVE_DEBUG
 601                      "debug "
 602 # if XCHAL_HAVE_OCD
 603                      "ocd "
 604 # endif
 605 #endif
 606 #if XCHAL_HAVE_DENSITY
 607                      "density "
 608 #endif
 609 #if XCHAL_HAVE_BOOLEANS
 610                      "boolean "
 611 #endif
 612 #if XCHAL_HAVE_LOOPS
 613                      "loop "
 614 #endif
 615 #if XCHAL_HAVE_NSA
 616                      "nsa "
 617 #endif
 618 #if XCHAL_HAVE_MINMAX
 619                      "minmax "
 620 #endif
 621 #if XCHAL_HAVE_SEXT
 622                      "sext "
 623 #endif
 624 #if XCHAL_HAVE_CLAMPS
 625                      "clamps "
 626 #endif
 627 #if XCHAL_HAVE_MAC16
 628                      "mac16 "
 629 #endif
 630 #if XCHAL_HAVE_MUL16
 631                      "mul16 "
 632 #endif
 633 #if XCHAL_HAVE_MUL32
 634                      "mul32 "
 635 #endif
 636 #if XCHAL_HAVE_MUL32_HIGH
 637                      "mul32h "
 638 #endif
 639 #if XCHAL_HAVE_FP
 640                      "fpu "
 641 #endif
 642 #if XCHAL_HAVE_S32C1I
 643                      "s32c1i "
 644 #endif
 645                      "\n");
 646
 647         /* Registers. */
 648         seq_printf(f,"physical aregs\t: %d\n"
 649                      "misc regs\t: %d\n"
 650                      "ibreak\t\t: %d\n"
 651                      "dbreak\t\t: %d\n",
 652                      XCHAL_NUM_AREGS,
 653                      XCHAL_NUM_MISC_REGS,
 654                      XCHAL_NUM_IBREAK,
 655                      XCHAL_NUM_DBREAK);
 656
 657
 658         /* Interrupt. */
 659         seq_printf(f,"num ints\t: %d\n"
 660                      "ext ints\t: %d\n"
 661                      "int levels\t: %d\n"
 662                      "timers\t\t: %d\n"
 663                      "debug level\t: %d\n",
 664                      XCHAL_NUM_INTERRUPTS,
 665                      XCHAL_NUM_EXTINTERRUPTS,
 666                      XCHAL_NUM_INTLEVELS,
 667                      XCHAL_NUM_TIMERS,
 668                      XCHAL_DEBUGLEVEL);
 669
 670         /* Cache */
 671         seq_printf(f,"icache line size: %d\n"
 672                      "icache ways\t: %d\n"
 673                      "icache size\t: %d\n"
 674                      "icache flags\t: "
 675 #if XCHAL_ICACHE_LINE_LOCKABLE
 676                      "lock "
 677 #endif
 678                      "\n"
 679                      "dcache line size: %d\n"
 680                      "dcache ways\t: %d\n"
 681                      "dcache size\t: %d\n"
 682                      "dcache flags\t: "
 683 #if XCHAL_DCACHE_IS_WRITEBACK
 684                      "writeback "
 685 #endif
 686 #if XCHAL_DCACHE_LINE_LOCKABLE
 687                      "lock "
 688 #endif
 689                      "\n",
 690                      XCHAL_ICACHE_LINESIZE,
 691                      XCHAL_ICACHE_WAYS,
 692                      XCHAL_ICACHE_SIZE,
 693                      XCHAL_DCACHE_LINESIZE,
 694                      XCHAL_DCACHE_WAYS,
 695                      XCHAL_DCACHE_SIZE);
 696
 697         return 0;
 698 }
 699
 700 /*
 701  * We show only CPU #0 info.
 702  */
 703 static void *
 704 c_start(struct seq_file *f, loff_t *pos)
 705 {
 706         return (*pos == 0) ? (void *)1 : NULL;
 707 }
 708
 709 static void *
 710 c_next(struct seq_file *f, void *v, loff_t *pos)
 711 {
 712         return NULL;
 713 }
 714
 715 static void
 716 c_stop(struct seq_file *f, void *v)
 717 {
 718 }
 719
 720 const struct seq_operations cpuinfo_op =
 721 {
 722         .start  = c_start,
 723         .next   = c_next,
 724         .stop   = c_stop,
 725         .show   = c_show,
 726 };
 727
 728 #endif /* CONFIG_PROC_FS */