Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / arch / x86 / include / asm / stackprotector.h
1 /*
2  * GCC stack protector support.
3  *
4  * Stack protector works by putting predefined pattern at the start of
5  * the stack frame and verifying that it hasn't been overwritten when
6  * returning from the function.  The pattern is called stack canary
7  * and unfortunately gcc requires it to be at a fixed offset from %gs.
8  * On x86_64, the offset is 40 bytes and on x86_32 20 bytes.  x86_64
9  * and x86_32 use segment registers differently and thus handles this
10  * requirement differently.
11  *
12  * On x86_64, %gs is shared by percpu area and stack canary.  All
13  * percpu symbols are zero based and %gs points to the base of percpu
14  * area.  The first occupant of the percpu area is always
15  * irq_stack_union which contains stack_canary at offset 40.  Userland
16  * %gs is always saved and restored on kernel entry and exit using
17  * swapgs, so stack protector doesn't add any complexity there.
18  *
19  * On x86_32, it's slightly more complicated.  As in x86_64, %gs is
20  * used for userland TLS.  Unfortunately, some processors are much
21  * slower at loading segment registers with different value when
22  * entering and leaving the kernel, so the kernel uses %fs for percpu
23  * area and manages %gs lazily so that %gs is switched only when
24  * necessary, usually during task switch.
25  *
26  * As gcc requires the stack canary at %gs:20, %gs can't be managed
27  * lazily if stack protector is enabled, so the kernel saves and
28  * restores userland %gs on kernel entry and exit.  This behavior is
29  * controlled by CONFIG_X86_32_LAZY_GS and accessors are defined in
30  * system.h to hide the details.
31  */
32
33 #ifndef _ASM_STACKPROTECTOR_H
34 #define _ASM_STACKPROTECTOR_H 1
35
36 #ifdef CONFIG_CC_STACKPROTECTOR
37
38 #include <asm/tsc.h>
39 #include <asm/processor.h>
40 #include <asm/percpu.h>
41 #include <asm/desc.h>
42 #include <linux/random.h>
43
44 /*
45  * 24 byte read-only segment initializer for stack canary.  Linker
46  * can't handle the address bit shifting.  Address will be set in
47  * head_32 for boot CPU and setup_per_cpu_areas() for others.
48  */
49 #define GDT_STACK_CANARY_INIT                                           \
50         [GDT_ENTRY_STACK_CANARY] = GDT_ENTRY_INIT(0x4090, 0, 0x18),
51
52 /*
53  * Initialize the stackprotector canary value.
54  *
55  * NOTE: this must only be called from functions that never return,
56  * and it must always be inlined.
57  */
58 static __always_inline void boot_init_stack_canary(void)
59 {
60         u64 uninitialized_var(canary);
61         u64 tsc;
62
63 #ifdef CONFIG_X86_64
64         BUILD_BUG_ON(offsetof(union irq_stack_union, stack_canary) != 40);
65 #endif
66         /*
67          * We both use the random pool and the current TSC as a source
68          * of randomness. The TSC only matters for very early init,
69          * there it already has some randomness on most systems. Later
70          * on during the bootup the random pool has true entropy too.
71          *
72          * For preempt-rt we need to weaken the randomness a bit, as
73          * we can't call into the random generator from atomic context
74          * due to locking constraints. We just leave canary
75          * uninitialized and use the TSC based randomness on top of
76          * it.
77          */
78 #ifndef CONFIG_PREEMPT_RT_FULL
79         get_random_bytes(&canary, sizeof(canary));
80 #endif
81         tsc = __native_read_tsc();
82         canary += tsc + (tsc << 32UL);
83
84         current->stack_canary = canary;
85 #ifdef CONFIG_X86_64
86         this_cpu_write(irq_stack_union.stack_canary, canary);
87 #else
88         this_cpu_write(stack_canary.canary, canary);
89 #endif
90 }
91
92 static inline void setup_stack_canary_segment(int cpu)
93 {
94 #ifdef CONFIG_X86_32
95         unsigned long canary = (unsigned long)&per_cpu(stack_canary, cpu);
96         struct desc_struct *gdt_table = get_cpu_gdt_table(cpu);
97         struct desc_struct desc;
98
99         desc = gdt_table[GDT_ENTRY_STACK_CANARY];
100         set_desc_base(&desc, canary);
101         write_gdt_entry(gdt_table, GDT_ENTRY_STACK_CANARY, &desc, DESCTYPE_S);
102 #endif
103 }
104
105 static inline void load_stack_canary_segment(void)
106 {
107 #ifdef CONFIG_X86_32
108         asm("mov %0, %%gs" : : "r" (__KERNEL_STACK_CANARY) : "memory");
109 #endif
110 }
111
112 #else   /* CC_STACKPROTECTOR */
113
114 #define GDT_STACK_CANARY_INIT
115
116 /* dummy boot_init_stack_canary() is defined in linux/stackprotector.h */
117
118 static inline void setup_stack_canary_segment(int cpu)
119 { }
120
121 static inline void load_stack_canary_segment(void)
122 {
123 #ifdef CONFIG_X86_32
124         asm volatile ("mov %0, %%gs" : : "r" (0));
125 #endif
126 }
127
128 #endif  /* CC_STACKPROTECTOR */
129 #endif  /* _ASM_STACKPROTECTOR_H */