kernel/arch/sparc/net/bpf_jit_comp.c

   1 #include <linux/moduleloader.h>
   2 #include <linux/workqueue.h>
   3 #include <linux/netdevice.h>
   4 #include <linux/filter.h>
   5 #include <linux/cache.h>
   6 #include <linux/if_vlan.h>
   7
   8 #include <asm/cacheflush.h>
   9 #include <asm/ptrace.h>
  10
  11 #include "bpf_jit.h"
  12
  13 int bpf_jit_enable __read_mostly;
  14
  15 static inline bool is_simm13(unsigned int value)
  16 {
  17         return value + 0x1000 < 0x2000;
  18 }
  19
  20 static void bpf_flush_icache(void *start_, void *end_)
  21 {
  22 #ifdef CONFIG_SPARC64
  23         /* Cheetah's I-cache is fully coherent.  */
  24         if (tlb_type == spitfire) {
  25                 unsigned long start = (unsigned long) start_;
  26                 unsigned long end = (unsigned long) end_;
  27
  28                 start &= ~7UL;
  29                 end = (end + 7UL) & ~7UL;
  30                 while (start < end) {
  31                         flushi(start);
  32                         start += 32;
  33                 }
  34         }
  35 #endif
  36 }
  37
  38 #define SEEN_DATAREF 1 /* might call external helpers */
  39 #define SEEN_XREG    2 /* ebx is used */
  40 #define SEEN_MEM     4 /* use mem[] for temporary storage */
  41
  42 #define S13(X)          ((X) & 0x1fff)
  43 #define IMMED           0x00002000
  44 #define RD(X)           ((X) << 25)
  45 #define RS1(X)          ((X) << 14)
  46 #define RS2(X)          ((X))
  47 #define OP(X)           ((X) << 30)
  48 #define OP2(X)          ((X) << 22)
  49 #define OP3(X)          ((X) << 19)
  50 #define COND(X)         ((X) << 25)
  51 #define F1(X)           OP(X)
  52 #define F2(X, Y)        (OP(X) | OP2(Y))
  53 #define F3(X, Y)        (OP(X) | OP3(Y))
  54
  55 #define CONDN           COND(0x0)
  56 #define CONDE           COND(0x1)
  57 #define CONDLE          COND(0x2)
  58 #define CONDL           COND(0x3)
  59 #define CONDLEU         COND(0x4)
  60 #define CONDCS          COND(0x5)
  61 #define CONDNEG         COND(0x6)
  62 #define CONDVC          COND(0x7)
  63 #define CONDA           COND(0x8)
  64 #define CONDNE          COND(0x9)
  65 #define CONDG           COND(0xa)
  66 #define CONDGE          COND(0xb)
  67 #define CONDGU          COND(0xc)
  68 #define CONDCC          COND(0xd)
  69 #define CONDPOS         COND(0xe)
  70 #define CONDVS          COND(0xf)
  71
  72 #define CONDGEU         CONDCC
  73 #define CONDLU          CONDCS
  74
  75 #define WDISP22(X)      (((X) >> 2) & 0x3fffff)
  76
  77 #define BA              (F2(0, 2) | CONDA)
  78 #define BGU             (F2(0, 2) | CONDGU)
  79 #define BLEU            (F2(0, 2) | CONDLEU)
  80 #define BGEU            (F2(0, 2) | CONDGEU)
  81 #define BLU             (F2(0, 2) | CONDLU)
  82 #define BE              (F2(0, 2) | CONDE)
  83 #define BNE             (F2(0, 2) | CONDNE)
  84
  85 #ifdef CONFIG_SPARC64
  86 #define BE_PTR          (F2(0, 1) | CONDE | (2 << 20))
  87 #else
  88 #define BE_PTR          BE
  89 #endif
  90
  91 #define SETHI(K, REG)   \
  92         (F2(0, 0x4) | RD(REG) | (((K) >> 10) & 0x3fffff))
  93 #define OR_LO(K, REG)   \
  94         (F3(2, 0x02) | IMMED | RS1(REG) | ((K) & 0x3ff) | RD(REG))
  95
  96 #define ADD             F3(2, 0x00)
  97 #define AND             F3(2, 0x01)
  98 #define ANDCC           F3(2, 0x11)
  99 #define OR              F3(2, 0x02)
 100 #define XOR             F3(2, 0x03)
 101 #define SUB             F3(2, 0x04)
 102 #define SUBCC           F3(2, 0x14)
 103 #define MUL             F3(2, 0x0a)     /* umul */
 104 #define DIV             F3(2, 0x0e)     /* udiv */
 105 #define SLL             F3(2, 0x25)
 106 #define SRL             F3(2, 0x26)
 107 #define JMPL            F3(2, 0x38)
 108 #define CALL            F1(1)
 109 #define BR              F2(0, 0x01)
 110 #define RD_Y            F3(2, 0x28)
 111 #define WR_Y            F3(2, 0x30)
 112
 113 #define LD32            F3(3, 0x00)
 114 #define LD8             F3(3, 0x01)
 115 #define LD16            F3(3, 0x02)
 116 #define LD64            F3(3, 0x0b)
 117 #define ST32            F3(3, 0x04)
 118
 119 #ifdef CONFIG_SPARC64
 120 #define LDPTR           LD64
 121 #define BASE_STACKFRAME 176
 122 #else
 123 #define LDPTR           LD32
 124 #define BASE_STACKFRAME 96
 125 #endif
 126
 127 #define LD32I           (LD32 | IMMED)
 128 #define LD8I            (LD8 | IMMED)
 129 #define LD16I           (LD16 | IMMED)
 130 #define LD64I           (LD64 | IMMED)
 131 #define LDPTRI          (LDPTR | IMMED)
 132 #define ST32I           (ST32 | IMMED)
 133
 134 #define emit_nop()              \
 135 do {                            \
 136         *prog++ = SETHI(0, G0); \
 137 } while (0)
 138
 139 #define emit_neg()                                      \
 140 do {    /* sub %g0, r_A, r_A */                         \
 141         *prog++ = SUB | RS1(G0) | RS2(r_A) | RD(r_A);   \
 142 } while (0)
 143
 144 #define emit_reg_move(FROM, TO)                         \
 145 do {    /* or %g0, FROM, TO */                          \
 146         *prog++ = OR | RS1(G0) | RS2(FROM) | RD(TO);    \
 147 } while (0)
 148
 149 #define emit_clear(REG)                                 \
 150 do {    /* or %g0, %g0, REG */                          \
 151         *prog++ = OR | RS1(G0) | RS2(G0) | RD(REG);     \
 152 } while (0)
 153
 154 #define emit_set_const(K, REG)                                  \
 155 do {    /* sethi %hi(K), REG */                                 \
 156         *prog++ = SETHI(K, REG);                                \
 157         /* or REG, %lo(K), REG */                               \
 158         *prog++ = OR_LO(K, REG);                                \
 159 } while (0)
 160
 161         /* Emit
 162          *
 163          *      OP      r_A, r_X, r_A
 164          */
 165 #define emit_alu_X(OPCODE)                                      \
 166 do {                                                            \
 167         seen |= SEEN_XREG;                                      \
 168         *prog++ = OPCODE | RS1(r_A) | RS2(r_X) | RD(r_A);       \
 169 } while (0)
 170
 171         /* Emit either:
 172          *
 173          *      OP      r_A, K, r_A
 174          *
 175          * or
 176          *
 177          *      sethi   %hi(K), r_TMP
 178          *      or      r_TMP, %lo(K), r_TMP
 179          *      OP      r_A, r_TMP, r_A
 180          *
 181          * depending upon whether K fits in a signed 13-bit
 182          * immediate instruction field.  Emit nothing if K
 183          * is zero.
 184          */
 185 #define emit_alu_K(OPCODE, K)                                   \
 186 do {                                                            \
 187         if (K || OPCODE == AND || OPCODE == MUL) {              \
 188                 unsigned int _insn = OPCODE;                    \
 189                 _insn |= RS1(r_A) | RD(r_A);                    \
 190                 if (is_simm13(K)) {                             \
 191                         *prog++ = _insn | IMMED | S13(K);       \
 192                 } else {                                        \
 193                         emit_set_const(K, r_TMP);               \
 194                         *prog++ = _insn | RS2(r_TMP);           \
 195                 }                                               \
 196         }                                                       \
 197 } while (0)
 198
 199 #define emit_loadimm(K, DEST)                                           \
 200 do {                                                                    \
 201         if (is_simm13(K)) {                                             \
 202                 /* or %g0, K, DEST */                                   \
 203                 *prog++ = OR | IMMED | RS1(G0) | S13(K) | RD(DEST);     \
 204         } else {                                                        \
 205                 emit_set_const(K, DEST);                                \
 206         }                                                               \
 207 } while (0)
 208
 209 #define emit_loadptr(BASE, STRUCT, FIELD, DEST)                         \
 210 do {    unsigned int _off = offsetof(STRUCT, FIELD);                    \
 211         BUILD_BUG_ON(FIELD_SIZEOF(STRUCT, FIELD) != sizeof(void *));    \
 212         *prog++ = LDPTRI | RS1(BASE) | S13(_off) | RD(DEST);            \
 213 } while (0)
 214
 215 #define emit_load32(BASE, STRUCT, FIELD, DEST)                          \
 216 do {    unsigned int _off = offsetof(STRUCT, FIELD);                    \
 217         BUILD_BUG_ON(FIELD_SIZEOF(STRUCT, FIELD) != sizeof(u32));       \
 218         *prog++ = LD32I | RS1(BASE) | S13(_off) | RD(DEST);             \
 219 } while (0)
 220
 221 #define emit_load16(BASE, STRUCT, FIELD, DEST)                          \
 222 do {    unsigned int _off = offsetof(STRUCT, FIELD);                    \
 223         BUILD_BUG_ON(FIELD_SIZEOF(STRUCT, FIELD) != sizeof(u16));       \
 224         *prog++ = LD16I | RS1(BASE) | S13(_off) | RD(DEST);             \
 225 } while (0)
 226
 227 #define __emit_load8(BASE, STRUCT, FIELD, DEST)                         \
 228 do {    unsigned int _off = offsetof(STRUCT, FIELD);                    \
 229         *prog++ = LD8I | RS1(BASE) | S13(_off) | RD(DEST);              \
 230 } while (0)
 231
 232 #define emit_load8(BASE, STRUCT, FIELD, DEST)                           \
 233 do {    BUILD_BUG_ON(FIELD_SIZEOF(STRUCT, FIELD) != sizeof(u8));        \
 234         __emit_load8(BASE, STRUCT, FIELD, DEST);                        \
 235 } while (0)
 236
 237 #ifdef CONFIG_SPARC64
 238 #define BIAS (STACK_BIAS - 4)
 239 #else
 240 #define BIAS (-4)
 241 #endif
 242
 243 #define emit_ldmem(OFF, DEST)                                           \
 244 do {    *prog++ = LD32I | RS1(SP) | S13(BIAS - (OFF)) | RD(DEST);       \
 245 } while (0)
 246
 247 #define emit_stmem(OFF, SRC)                                            \
 248 do {    *prog++ = ST32I | RS1(SP) | S13(BIAS - (OFF)) | RD(SRC);        \
 249 } while (0)
 250
 251 #ifdef CONFIG_SMP
 252 #ifdef CONFIG_SPARC64
 253 #define emit_load_cpu(REG)                                              \
 254         emit_load16(G6, struct thread_info, cpu, REG)
 255 #else
 256 #define emit_load_cpu(REG)                                              \
 257         emit_load32(G6, struct thread_info, cpu, REG)
 258 #endif
 259 #else
 260 #define emit_load_cpu(REG)      emit_clear(REG)
 261 #endif
 262
 263 #define emit_skb_loadptr(FIELD, DEST) \
 264         emit_loadptr(r_SKB, struct sk_buff, FIELD, DEST)
 265 #define emit_skb_load32(FIELD, DEST) \
 266         emit_load32(r_SKB, struct sk_buff, FIELD, DEST)
 267 #define emit_skb_load16(FIELD, DEST) \
 268         emit_load16(r_SKB, struct sk_buff, FIELD, DEST)
 269 #define __emit_skb_load8(FIELD, DEST) \
 270         __emit_load8(r_SKB, struct sk_buff, FIELD, DEST)
 271 #define emit_skb_load8(FIELD, DEST) \
 272         emit_load8(r_SKB, struct sk_buff, FIELD, DEST)
 273
 274 #define emit_jmpl(BASE, IMM_OFF, LREG) \
 275         *prog++ = (JMPL | IMMED | RS1(BASE) | S13(IMM_OFF) | RD(LREG))
 276
 277 #define emit_call(FUNC)                                 \
 278 do {    void *_here = image + addrs[i] - 8;             \
 279         unsigned int _off = (void *)(FUNC) - _here;     \
 280         *prog++ = CALL | (((_off) >> 2) & 0x3fffffff);  \
 281         emit_nop();                                     \
 282 } while (0)
 283
 284 #define emit_branch(BR_OPC, DEST)                       \
 285 do {    unsigned int _here = addrs[i] - 8;              \
 286         *prog++ = BR_OPC | WDISP22((DEST) - _here);     \
 287 } while (0)
 288
 289 #define emit_branch_off(BR_OPC, OFF)                    \
 290 do {    *prog++ = BR_OPC | WDISP22(OFF);                \
 291 } while (0)
 292
 293 #define emit_jump(DEST)         emit_branch(BA, DEST)
 294
 295 #define emit_read_y(REG)        *prog++ = RD_Y | RD(REG)
 296 #define emit_write_y(REG)       *prog++ = WR_Y | IMMED | RS1(REG) | S13(0)
 297
 298 #define emit_cmp(R1, R2) \
 299         *prog++ = (SUBCC | RS1(R1) | RS2(R2) | RD(G0))
 300
 301 #define emit_cmpi(R1, IMM) \
 302         *prog++ = (SUBCC | IMMED | RS1(R1) | S13(IMM) | RD(G0));
 303
 304 #define emit_btst(R1, R2) \
 305         *prog++ = (ANDCC | RS1(R1) | RS2(R2) | RD(G0))
 306
 307 #define emit_btsti(R1, IMM) \
 308         *prog++ = (ANDCC | IMMED | RS1(R1) | S13(IMM) | RD(G0));
 309
 310 #define emit_sub(R1, R2, R3) \
 311         *prog++ = (SUB | RS1(R1) | RS2(R2) | RD(R3))
 312
 313 #define emit_subi(R1, IMM, R3) \
 314         *prog++ = (SUB | IMMED | RS1(R1) | S13(IMM) | RD(R3))
 315
 316 #define emit_add(R1, R2, R3) \
 317         *prog++ = (ADD | RS1(R1) | RS2(R2) | RD(R3))
 318
 319 #define emit_addi(R1, IMM, R3) \
 320         *prog++ = (ADD | IMMED | RS1(R1) | S13(IMM) | RD(R3))
 321
 322 #define emit_and(R1, R2, R3) \
 323         *prog++ = (AND | RS1(R1) | RS2(R2) | RD(R3))
 324
 325 #define emit_andi(R1, IMM, R3) \
 326         *prog++ = (AND | IMMED | RS1(R1) | S13(IMM) | RD(R3))
 327
 328 #define emit_alloc_stack(SZ) \
 329         *prog++ = (SUB | IMMED | RS1(SP) | S13(SZ) | RD(SP))
 330
 331 #define emit_release_stack(SZ) \
 332         *prog++ = (ADD | IMMED | RS1(SP) | S13(SZ) | RD(SP))
 333
 334 /* A note about branch offset calculations.  The addrs[] array,
 335  * indexed by BPF instruction, records the address after all the
 336  * sparc instructions emitted for that BPF instruction.
 337  *
 338  * The most common case is to emit a branch at the end of such
 339  * a code sequence.  So this would be two instructions, the
 340  * branch and it's delay slot.
 341  *
 342  * Therefore by default the branch emitters calculate the branch
 343  * offset field as:
 344  *
 345  *      destination - (addrs[i] - 8)
 346  *
 347  * This "addrs[i] - 8" is the address of the branch itself or
 348  * what "." would be in assembler notation.  The "8" part is
 349  * how we take into consideration the branch and it's delay
 350  * slot mentioned above.
 351  *
 352  * Sometimes we need to emit a branch earlier in the code
 353  * sequence.  And in these situations we adjust "destination"
 354  * to accomodate this difference.  For example, if we needed
 355  * to emit a branch (and it's delay slot) right before the
 356  * final instruction emitted for a BPF opcode, we'd use
 357  * "destination + 4" instead of just plain "destination" above.
 358  *
 359  * This is why you see all of these funny emit_branch() and
 360  * emit_jump() calls with adjusted offsets.
 361  */
 362
 363 void bpf_jit_compile(struct bpf_prog *fp)
 364 {
 365         unsigned int cleanup_addr, proglen, oldproglen = 0;
 366         u32 temp[8], *prog, *func, seen = 0, pass;
 367         const struct sock_filter *filter = fp->insns;
 368         int i, flen = fp->len, pc_ret0 = -1;
 369         unsigned int *addrs;
 370         void *image;
 371
 372         if (!bpf_jit_enable)
 373                 return;
 374
 375         addrs = kmalloc(flen * sizeof(*addrs), GFP_KERNEL);
 376         if (addrs == NULL)
 377                 return;
 378
 379         /* Before first pass, make a rough estimation of addrs[]
 380          * each bpf instruction is translated to less than 64 bytes
 381          */
 382         for (proglen = 0, i = 0; i < flen; i++) {
 383                 proglen += 64;
 384                 addrs[i] = proglen;
 385         }
 386         cleanup_addr = proglen; /* epilogue address */
 387         image = NULL;
 388         for (pass = 0; pass < 10; pass++) {
 389                 u8 seen_or_pass0 = (pass == 0) ? (SEEN_XREG | SEEN_DATAREF | SEEN_MEM) : seen;
 390
 391                 /* no prologue/epilogue for trivial filters (RET something) */
 392                 proglen = 0;
 393                 prog = temp;
 394
 395                 /* Prologue */
 396                 if (seen_or_pass0) {
 397                         if (seen_or_pass0 & SEEN_MEM) {
 398                                 unsigned int sz = BASE_STACKFRAME;
 399                                 sz += BPF_MEMWORDS * sizeof(u32);
 400                                 emit_alloc_stack(sz);
 401                         }
 402
 403                         /* Make sure we dont leek kernel memory. */
 404                         if (seen_or_pass0 & SEEN_XREG)
 405                                 emit_clear(r_X);
 406
 407                         /* If this filter needs to access skb data,
 408                          * load %o4 and %o5 with:
 409                          *  %o4 = skb->len - skb->data_len
 410                          *  %o5 = skb->data
 411                          * And also back up %o7 into r_saved_O7 so we can
 412                          * invoke the stubs using 'call'.
 413                          */
 414                         if (seen_or_pass0 & SEEN_DATAREF) {
 415                                 emit_load32(r_SKB, struct sk_buff, len, r_HEADLEN);
 416                                 emit_load32(r_SKB, struct sk_buff, data_len, r_TMP);
 417                                 emit_sub(r_HEADLEN, r_TMP, r_HEADLEN);
 418                                 emit_loadptr(r_SKB, struct sk_buff, data, r_SKB_DATA);
 419                         }
 420                 }
 421                 emit_reg_move(O7, r_saved_O7);
 422
 423                 /* Make sure we dont leak kernel information to the user. */
 424                 if (bpf_needs_clear_a(&filter[0]))
 425                         emit_clear(r_A); /* A = 0 */
 426
 427                 for (i = 0; i < flen; i++) {
 428                         unsigned int K = filter[i].k;
 429                         unsigned int t_offset;
 430                         unsigned int f_offset;
 431                         u32 t_op, f_op;
 432                         u16 code = bpf_anc_helper(&filter[i]);
 433                         int ilen;
 434
 435                         switch (code) {
 436                         case BPF_ALU | BPF_ADD | BPF_X: /* A += X; */
 437                                 emit_alu_X(ADD);
 438                                 break;
 439                         case BPF_ALU | BPF_ADD | BPF_K: /* A += K; */
 440                                 emit_alu_K(ADD, K);
 441                                 break;
 442                         case BPF_ALU | BPF_SUB | BPF_X: /* A -= X; */
 443                                 emit_alu_X(SUB);
 444                                 break;
 445                         case BPF_ALU | BPF_SUB | BPF_K: /* A -= K */
 446                                 emit_alu_K(SUB, K);
 447                                 break;
 448                         case BPF_ALU | BPF_AND | BPF_X: /* A &= X */
 449                                 emit_alu_X(AND);
 450                                 break;
 451                         case BPF_ALU | BPF_AND | BPF_K: /* A &= K */
 452                                 emit_alu_K(AND, K);
 453                                 break;
 454                         case BPF_ALU | BPF_OR | BPF_X:  /* A |= X */
 455                                 emit_alu_X(OR);
 456                                 break;
 457                         case BPF_ALU | BPF_OR | BPF_K:  /* A |= K */
 458                                 emit_alu_K(OR, K);
 459                                 break;
 460                         case BPF_ANC | SKF_AD_ALU_XOR_X: /* A ^= X; */
 461                         case BPF_ALU | BPF_XOR | BPF_X:
 462                                 emit_alu_X(XOR);
 463                                 break;
 464                         case BPF_ALU | BPF_XOR | BPF_K: /* A ^= K */
 465                                 emit_alu_K(XOR, K);
 466                                 break;
 467                         case BPF_ALU | BPF_LSH | BPF_X: /* A <<= X */
 468                                 emit_alu_X(SLL);
 469                                 break;
 470                         case BPF_ALU | BPF_LSH | BPF_K: /* A <<= K */
 471                                 emit_alu_K(SLL, K);
 472                                 break;
 473                         case BPF_ALU | BPF_RSH | BPF_X: /* A >>= X */
 474                                 emit_alu_X(SRL);
 475                                 break;
 476                         case BPF_ALU | BPF_RSH | BPF_K: /* A >>= K */
 477                                 emit_alu_K(SRL, K);
 478                                 break;
 479                         case BPF_ALU | BPF_MUL | BPF_X: /* A *= X; */
 480                                 emit_alu_X(MUL);
 481                                 break;
 482                         case BPF_ALU | BPF_MUL | BPF_K: /* A *= K */
 483                                 emit_alu_K(MUL, K);
 484                                 break;
 485                         case BPF_ALU | BPF_DIV | BPF_K: /* A /= K with K != 0*/
 486                                 if (K == 1)
 487                                         break;
 488                                 emit_write_y(G0);
 489 #ifdef CONFIG_SPARC32
 490                                 /* The Sparc v8 architecture requires
 491                                  * three instructions between a %y
 492                                  * register write and the first use.
 493                                  */
 494                                 emit_nop();
 495                                 emit_nop();
 496                                 emit_nop();
 497 #endif
 498                                 emit_alu_K(DIV, K);
 499                                 break;
 500                         case BPF_ALU | BPF_DIV | BPF_X: /* A /= X; */
 501                                 emit_cmpi(r_X, 0);
 502                                 if (pc_ret0 > 0) {
 503                                         t_offset = addrs[pc_ret0 - 1];
 504 #ifdef CONFIG_SPARC32
 505                                         emit_branch(BE, t_offset + 20);
 506 #else
 507                                         emit_branch(BE, t_offset + 8);
 508 #endif
 509                                         emit_nop(); /* delay slot */
 510                                 } else {
 511                                         emit_branch_off(BNE, 16);
 512                                         emit_nop();
 513 #ifdef CONFIG_SPARC32
 514                                         emit_jump(cleanup_addr + 20);
 515 #else
 516                                         emit_jump(cleanup_addr + 8);
 517 #endif
 518                                         emit_clear(r_A);
 519                                 }
 520                                 emit_write_y(G0);
 521 #ifdef CONFIG_SPARC32
 522                                 /* The Sparc v8 architecture requires
 523                                  * three instructions between a %y
 524                                  * register write and the first use.
 525                                  */
 526                                 emit_nop();
 527                                 emit_nop();
 528                                 emit_nop();
 529 #endif
 530                                 emit_alu_X(DIV);
 531                                 break;
 532                         case BPF_ALU | BPF_NEG:
 533                                 emit_neg();
 534                                 break;
 535                         case BPF_RET | BPF_K:
 536                                 if (!K) {
 537                                         if (pc_ret0 == -1)
 538                                                 pc_ret0 = i;
 539                                         emit_clear(r_A);
 540                                 } else {
 541                                         emit_loadimm(K, r_A);
 542                                 }
 543                                 /* Fallthrough */
 544                         case BPF_RET | BPF_A:
 545                                 if (seen_or_pass0) {
 546                                         if (i != flen - 1) {
 547                                                 emit_jump(cleanup_addr);
 548                                                 emit_nop();
 549                                                 break;
 550                                         }
 551                                         if (seen_or_pass0 & SEEN_MEM) {
 552                                                 unsigned int sz = BASE_STACKFRAME;
 553                                                 sz += BPF_MEMWORDS * sizeof(u32);
 554                                                 emit_release_stack(sz);
 555                                         }
 556                                 }
 557                                 /* jmpl %r_saved_O7 + 8, %g0 */
 558                                 emit_jmpl(r_saved_O7, 8, G0);
 559                                 emit_reg_move(r_A, O0); /* delay slot */
 560                                 break;
 561                         case BPF_MISC | BPF_TAX:
 562                                 seen |= SEEN_XREG;
 563                                 emit_reg_move(r_A, r_X);
 564                                 break;
 565                         case BPF_MISC | BPF_TXA:
 566                                 seen |= SEEN_XREG;
 567                                 emit_reg_move(r_X, r_A);
 568                                 break;
 569                         case BPF_ANC | SKF_AD_CPU:
 570                                 emit_load_cpu(r_A);
 571                                 break;
 572                         case BPF_ANC | SKF_AD_PROTOCOL:
 573                                 emit_skb_load16(protocol, r_A);
 574                                 break;
 575                         case BPF_ANC | SKF_AD_PKTTYPE:
 576                                 __emit_skb_load8(__pkt_type_offset, r_A);
 577                                 emit_andi(r_A, PKT_TYPE_MAX, r_A);
 578                                 emit_alu_K(SRL, 5);
 579                                 break;
 580                         case BPF_ANC | SKF_AD_IFINDEX:
 581                                 emit_skb_loadptr(dev, r_A);
 582                                 emit_cmpi(r_A, 0);
 583                                 emit_branch(BE_PTR, cleanup_addr + 4);
 584                                 emit_nop();
 585                                 emit_load32(r_A, struct net_device, ifindex, r_A);
 586                                 break;
 587                         case BPF_ANC | SKF_AD_MARK:
 588                                 emit_skb_load32(mark, r_A);
 589                                 break;
 590                         case BPF_ANC | SKF_AD_QUEUE:
 591                                 emit_skb_load16(queue_mapping, r_A);
 592                                 break;
 593                         case BPF_ANC | SKF_AD_HATYPE:
 594                                 emit_skb_loadptr(dev, r_A);
 595                                 emit_cmpi(r_A, 0);
 596                                 emit_branch(BE_PTR, cleanup_addr + 4);
 597                                 emit_nop();
 598                                 emit_load16(r_A, struct net_device, type, r_A);
 599                                 break;
 600                         case BPF_ANC | SKF_AD_RXHASH:
 601                                 emit_skb_load32(hash, r_A);
 602                                 break;
 603                         case BPF_ANC | SKF_AD_VLAN_TAG:
 604                         case BPF_ANC | SKF_AD_VLAN_TAG_PRESENT:
 605                                 emit_skb_load16(vlan_tci, r_A);
 606                                 if (code != (BPF_ANC | SKF_AD_VLAN_TAG)) {
 607                                         emit_alu_K(SRL, 12);
 608                                         emit_andi(r_A, 1, r_A);
 609                                 } else {
 610                                         emit_loadimm(~VLAN_TAG_PRESENT, r_TMP);
 611                                         emit_and(r_A, r_TMP, r_A);
 612                                 }
 613                                 break;
 614                         case BPF_LD | BPF_W | BPF_LEN:
 615                                 emit_skb_load32(len, r_A);
 616                                 break;
 617                         case BPF_LDX | BPF_W | BPF_LEN:
 618                                 emit_skb_load32(len, r_X);
 619                                 break;
 620                         case BPF_LD | BPF_IMM:
 621                                 emit_loadimm(K, r_A);
 622                                 break;
 623                         case BPF_LDX | BPF_IMM:
 624                                 emit_loadimm(K, r_X);
 625                                 break;
 626                         case BPF_LD | BPF_MEM:
 627                                 seen |= SEEN_MEM;
 628                                 emit_ldmem(K * 4, r_A);
 629                                 break;
 630                         case BPF_LDX | BPF_MEM:
 631                                 seen |= SEEN_MEM | SEEN_XREG;
 632                                 emit_ldmem(K * 4, r_X);
 633                                 break;
 634                         case BPF_ST:
 635                                 seen |= SEEN_MEM;
 636                                 emit_stmem(K * 4, r_A);
 637                                 break;
 638                         case BPF_STX:
 639                                 seen |= SEEN_MEM | SEEN_XREG;
 640                                 emit_stmem(K * 4, r_X);
 641                                 break;
 642
 643 #define CHOOSE_LOAD_FUNC(K, func) \
 644         ((int)K < 0 ? ((int)K >= SKF_LL_OFF ? func##_negative_offset : func) : func##_positive_offset)
 645
 646                         case BPF_LD | BPF_W | BPF_ABS:
 647                                 func = CHOOSE_LOAD_FUNC(K, bpf_jit_load_word);
 648 common_load:                    seen |= SEEN_DATAREF;
 649                                 emit_loadimm(K, r_OFF);
 650                                 emit_call(func);
 651                                 break;
 652                         case BPF_LD | BPF_H | BPF_ABS:
 653                                 func = CHOOSE_LOAD_FUNC(K, bpf_jit_load_half);
 654                                 goto common_load;
 655                         case BPF_LD | BPF_B | BPF_ABS:
 656                                 func = CHOOSE_LOAD_FUNC(K, bpf_jit_load_byte);
 657                                 goto common_load;
 658                         case BPF_LDX | BPF_B | BPF_MSH:
 659                                 func = CHOOSE_LOAD_FUNC(K, bpf_jit_load_byte_msh);
 660                                 goto common_load;
 661                         case BPF_LD | BPF_W | BPF_IND:
 662                                 func = bpf_jit_load_word;
 663 common_load_ind:                seen |= SEEN_DATAREF | SEEN_XREG;
 664                                 if (K) {
 665                                         if (is_simm13(K)) {
 666                                                 emit_addi(r_X, K, r_OFF);
 667                                         } else {
 668                                                 emit_loadimm(K, r_TMP);
 669                                                 emit_add(r_X, r_TMP, r_OFF);
 670                                         }
 671                                 } else {
 672                                         emit_reg_move(r_X, r_OFF);
 673                                 }
 674                                 emit_call(func);
 675                                 break;
 676                         case BPF_LD | BPF_H | BPF_IND:
 677                                 func = bpf_jit_load_half;
 678                                 goto common_load_ind;
 679                         case BPF_LD | BPF_B | BPF_IND:
 680                                 func = bpf_jit_load_byte;
 681                                 goto common_load_ind;
 682                         case BPF_JMP | BPF_JA:
 683                                 emit_jump(addrs[i + K]);
 684                                 emit_nop();
 685                                 break;
 686
 687 #define COND_SEL(CODE, TOP, FOP)        \
 688         case CODE:                      \
 689                 t_op = TOP;             \
 690                 f_op = FOP;             \
 691                 goto cond_branch
 692
 693                         COND_SEL(BPF_JMP | BPF_JGT | BPF_K, BGU, BLEU);
 694                         COND_SEL(BPF_JMP | BPF_JGE | BPF_K, BGEU, BLU);
 695                         COND_SEL(BPF_JMP | BPF_JEQ | BPF_K, BE, BNE);
 696                         COND_SEL(BPF_JMP | BPF_JSET | BPF_K, BNE, BE);
 697                         COND_SEL(BPF_JMP | BPF_JGT | BPF_X, BGU, BLEU);
 698                         COND_SEL(BPF_JMP | BPF_JGE | BPF_X, BGEU, BLU);
 699                         COND_SEL(BPF_JMP | BPF_JEQ | BPF_X, BE, BNE);
 700                         COND_SEL(BPF_JMP | BPF_JSET | BPF_X, BNE, BE);
 701
 702 cond_branch:                    f_offset = addrs[i + filter[i].jf];
 703                                 t_offset = addrs[i + filter[i].jt];
 704
 705                                 /* same targets, can avoid doing the test :) */
 706                                 if (filter[i].jt == filter[i].jf) {
 707                                         emit_jump(t_offset);
 708                                         emit_nop();
 709                                         break;
 710                                 }
 711
 712                                 switch (code) {
 713                                 case BPF_JMP | BPF_JGT | BPF_X:
 714                                 case BPF_JMP | BPF_JGE | BPF_X:
 715                                 case BPF_JMP | BPF_JEQ | BPF_X:
 716                                         seen |= SEEN_XREG;
 717                                         emit_cmp(r_A, r_X);
 718                                         break;
 719                                 case BPF_JMP | BPF_JSET | BPF_X:
 720                                         seen |= SEEN_XREG;
 721                                         emit_btst(r_A, r_X);
 722                                         break;
 723                                 case BPF_JMP | BPF_JEQ | BPF_K:
 724                                 case BPF_JMP | BPF_JGT | BPF_K:
 725                                 case BPF_JMP | BPF_JGE | BPF_K:
 726                                         if (is_simm13(K)) {
 727                                                 emit_cmpi(r_A, K);
 728                                         } else {
 729                                                 emit_loadimm(K, r_TMP);
 730                                                 emit_cmp(r_A, r_TMP);
 731                                         }
 732                                         break;
 733                                 case BPF_JMP | BPF_JSET | BPF_K:
 734                                         if (is_simm13(K)) {
 735                                                 emit_btsti(r_A, K);
 736                                         } else {
 737                                                 emit_loadimm(K, r_TMP);
 738                                                 emit_btst(r_A, r_TMP);
 739                                         }
 740                                         break;
 741                                 }
 742                                 if (filter[i].jt != 0) {
 743                                         if (filter[i].jf)
 744                                                 t_offset += 8;
 745                                         emit_branch(t_op, t_offset);
 746                                         emit_nop(); /* delay slot */
 747                                         if (filter[i].jf) {
 748                                                 emit_jump(f_offset);
 749                                                 emit_nop();
 750                                         }
 751                                         break;
 752                                 }
 753                                 emit_branch(f_op, f_offset);
 754                                 emit_nop(); /* delay slot */
 755                                 break;
 756
 757                         default:
 758                                 /* hmm, too complex filter, give up with jit compiler */
 759                                 goto out;
 760                         }
 761                         ilen = (void *) prog - (void *) temp;
 762                         if (image) {
 763                                 if (unlikely(proglen + ilen > oldproglen)) {
 764                                         pr_err("bpb_jit_compile fatal error\n");
 765                                         kfree(addrs);
 766                                         module_memfree(image);
 767                                         return;
 768                                 }
 769                                 memcpy(image + proglen, temp, ilen);
 770                         }
 771                         proglen += ilen;
 772                         addrs[i] = proglen;
 773                         prog = temp;
 774                 }
 775                 /* last bpf instruction is always a RET :
 776                  * use it to give the cleanup instruction(s) addr
 777                  */
 778                 cleanup_addr = proglen - 8; /* jmpl; mov r_A,%o0; */
 779                 if (seen_or_pass0 & SEEN_MEM)
 780                         cleanup_addr -= 4; /* add %sp, X, %sp; */
 781
 782                 if (image) {
 783                         if (proglen != oldproglen)
 784                                 pr_err("bpb_jit_compile proglen=%u != oldproglen=%u\n",
 785                                        proglen, oldproglen);
 786                         break;
 787                 }
 788                 if (proglen == oldproglen) {
 789                         image = module_alloc(proglen);
 790                         if (!image)
 791                                 goto out;
 792                 }
 793                 oldproglen = proglen;
 794         }
 795
 796         if (bpf_jit_enable > 1)
 797                 bpf_jit_dump(flen, proglen, pass + 1, image);
 798
 799         if (image) {
 800                 bpf_flush_icache(image, image + proglen);
 801                 fp->bpf_func = (void *)image;
 802                 fp->jited = 1;
 803         }
 804 out:
 805         kfree(addrs);
 806         return;
 807 }
 808
 809 void bpf_jit_free(struct bpf_prog *fp)
 810 {
 811         if (fp->jited)
 812                 module_memfree(fp->bpf_func);
 813
 814         bpf_prog_unlock_free(fp);
 815 }