Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / arch / sh / boards / board-polaris.c
1 /*
2  * June 2006 Steve Glendinning <steve.glendinning@shawell.net>
3  *
4  * Polaris-specific resource declaration
5  *
6  */
7
8 #include <linux/init.h>
9 #include <linux/interrupt.h>
10 #include <linux/irq.h>
11 #include <linux/platform_device.h>
12 #include <linux/regulator/fixed.h>
13 #include <linux/regulator/machine.h>
14 #include <linux/smsc911x.h>
15 #include <linux/io.h>
16 #include <asm/irq.h>
17 #include <asm/machvec.h>
18 #include <asm/heartbeat.h>
19 #include <cpu/gpio.h>
20 #include <mach-se/mach/se.h>
21
22 #define BCR2            (0xFFFFFF62)
23 #define WCR2            (0xFFFFFF66)
24 #define AREA5_WAIT_CTRL (0x1C00)
25 #define WAIT_STATES_10  (0x7)
26
27 /* Dummy supplies, where voltage doesn't matter */
28 static struct regulator_consumer_supply dummy_supplies[] = {
29         REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
30         REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
31 };
32
33 static struct resource smsc911x_resources[] = {
34         [0] = {
35                 .name           = "smsc911x-memory",
36                 .start          = PA_EXT5,
37                 .end            = PA_EXT5 + 0x1fff,
38                 .flags          = IORESOURCE_MEM,
39         },
40         [1] = {
41                 .name           = "smsc911x-irq",
42                 .start          = IRQ0_IRQ,
43                 .end            = IRQ0_IRQ,
44                 .flags          = IORESOURCE_IRQ,
45         },
46 };
47
48 static struct smsc911x_platform_config smsc911x_config = {
49         .irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
50         .irq_type       = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
51         .flags          = SMSC911X_USE_32BIT,
52         .phy_interface  = PHY_INTERFACE_MODE_MII,
53 };
54
55 static struct platform_device smsc911x_device = {
56         .name           = "smsc911x",
57         .id             = 0,
58         .num_resources  = ARRAY_SIZE(smsc911x_resources),
59         .resource       = smsc911x_resources,
60         .dev = {
61                 .platform_data = &smsc911x_config,
62         },
63 };
64
65 static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3 };
66
67 static struct heartbeat_data heartbeat_data = {
68         .bit_pos        = heartbeat_bit_pos,
69         .nr_bits        = ARRAY_SIZE(heartbeat_bit_pos),
70 };
71
72 static struct resource heartbeat_resource = {
73         .start  = PORT_PCDR,
74         .end    = PORT_PCDR,
75         .flags  = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
76 };
77
78 static struct platform_device heartbeat_device = {
79         .name           = "heartbeat",
80         .id             = -1,
81         .dev    = {
82                 .platform_data  = &heartbeat_data,
83         },
84         .num_resources  = 1,
85         .resource       = &heartbeat_resource,
86 };
87
88 static struct platform_device *polaris_devices[] __initdata = {
89         &smsc911x_device,
90         &heartbeat_device,
91 };
92
93 static int __init polaris_initialise(void)
94 {
95         u16 wcr, bcr_mask;
96
97         printk(KERN_INFO "Configuring Polaris external bus\n");
98
99         regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
100
101         /* Configure area 5 with 2 wait states */
102         wcr = __raw_readw(WCR2);
103         wcr &= (~AREA5_WAIT_CTRL);
104         wcr |= (WAIT_STATES_10 << 10);
105         __raw_writew(wcr, WCR2);
106
107         /* Configure area 5 for 32-bit access */
108         bcr_mask = __raw_readw(BCR2);
109         bcr_mask |= 1 << 10;
110         __raw_writew(bcr_mask, BCR2);
111
112         return platform_add_devices(polaris_devices,
113                                     ARRAY_SIZE(polaris_devices));
114 }
115 arch_initcall(polaris_initialise);
116
117 static struct ipr_data ipr_irq_table[] = {
118         /* External IRQs */
119         { IRQ0_IRQ, 0,  0,  1, },       /* IRQ0 */
120         { IRQ1_IRQ, 0,  4,  1, },       /* IRQ1 */
121 };
122
123 static unsigned long ipr_offsets[] = {
124         INTC_IPRC
125 };
126
127 static struct ipr_desc ipr_irq_desc = {
128         .ipr_offsets    = ipr_offsets,
129         .nr_offsets     = ARRAY_SIZE(ipr_offsets),
130
131         .ipr_data       = ipr_irq_table,
132         .nr_irqs        = ARRAY_SIZE(ipr_irq_table),
133         .chip = {
134                 .name   = "sh7709-ext",
135         },
136 };
137
138 static void __init init_polaris_irq(void)
139 {
140         /* Disable all interrupts */
141         __raw_writew(0, BCR_ILCRA);
142         __raw_writew(0, BCR_ILCRB);
143         __raw_writew(0, BCR_ILCRC);
144         __raw_writew(0, BCR_ILCRD);
145         __raw_writew(0, BCR_ILCRE);
146         __raw_writew(0, BCR_ILCRF);
147         __raw_writew(0, BCR_ILCRG);
148
149         register_ipr_controller(&ipr_irq_desc);
150 }
151
152 static struct sh_machine_vector mv_polaris __initmv = {
153         .mv_name                = "Polaris",
154         .mv_init_irq            = init_polaris_irq,
155 };