Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / arch / powerpc / sysdev / i8259.c
1 /*
2  * i8259 interrupt controller driver.
3  *
4  * This program is free software; you can redistribute it and/or
5  * modify it under the terms of the GNU General Public License
6  * as published by the Free Software Foundation; either version
7  * 2 of the License, or (at your option) any later version.
8  */
9 #undef DEBUG
10
11 #include <linux/ioport.h>
12 #include <linux/interrupt.h>
13 #include <linux/kernel.h>
14 #include <linux/delay.h>
15 #include <asm/io.h>
16 #include <asm/i8259.h>
17 #include <asm/prom.h>
18
19 static volatile void __iomem *pci_intack; /* RO, gives us the irq vector */
20
21 static unsigned char cached_8259[2] = { 0xff, 0xff };
22 #define cached_A1 (cached_8259[0])
23 #define cached_21 (cached_8259[1])
24
25 static DEFINE_RAW_SPINLOCK(i8259_lock);
26
27 static struct irq_domain *i8259_host;
28
29 /*
30  * Acknowledge the IRQ using either the PCI host bridge's interrupt
31  * acknowledge feature or poll.  How i8259_init() is called determines
32  * which is called.  It should be noted that polling is broken on some
33  * IBM and Motorola PReP boxes so we must use the int-ack feature on them.
34  */
35 unsigned int i8259_irq(void)
36 {
37         int irq;
38         int lock = 0;
39
40         /* Either int-ack or poll for the IRQ */
41         if (pci_intack)
42                 irq = readb(pci_intack);
43         else {
44                 raw_spin_lock(&i8259_lock);
45                 lock = 1;
46
47                 /* Perform an interrupt acknowledge cycle on controller 1. */
48                 outb(0x0C, 0x20);               /* prepare for poll */
49                 irq = inb(0x20) & 7;
50                 if (irq == 2 ) {
51                         /*
52                          * Interrupt is cascaded so perform interrupt
53                          * acknowledge on controller 2.
54                          */
55                         outb(0x0C, 0xA0);       /* prepare for poll */
56                         irq = (inb(0xA0) & 7) + 8;
57                 }
58         }
59
60         if (irq == 7) {
61                 /*
62                  * This may be a spurious interrupt.
63                  *
64                  * Read the interrupt status register (ISR). If the most
65                  * significant bit is not set then there is no valid
66                  * interrupt.
67                  */
68                 if (!pci_intack)
69                         outb(0x0B, 0x20);       /* ISR register */
70                 if(~inb(0x20) & 0x80)
71                         irq = NO_IRQ;
72         } else if (irq == 0xff)
73                 irq = NO_IRQ;
74
75         if (lock)
76                 raw_spin_unlock(&i8259_lock);
77         return irq;
78 }
79
80 static void i8259_mask_and_ack_irq(struct irq_data *d)
81 {
82         unsigned long flags;
83
84         raw_spin_lock_irqsave(&i8259_lock, flags);
85         if (d->irq > 7) {
86                 cached_A1 |= 1 << (d->irq-8);
87                 inb(0xA1);      /* DUMMY */
88                 outb(cached_A1, 0xA1);
89                 outb(0x20, 0xA0);       /* Non-specific EOI */
90                 outb(0x20, 0x20);       /* Non-specific EOI to cascade */
91         } else {
92                 cached_21 |= 1 << d->irq;
93                 inb(0x21);      /* DUMMY */
94                 outb(cached_21, 0x21);
95                 outb(0x20, 0x20);       /* Non-specific EOI */
96         }
97         raw_spin_unlock_irqrestore(&i8259_lock, flags);
98 }
99
100 static void i8259_set_irq_mask(int irq_nr)
101 {
102         outb(cached_A1,0xA1);
103         outb(cached_21,0x21);
104 }
105
106 static void i8259_mask_irq(struct irq_data *d)
107 {
108         unsigned long flags;
109
110         pr_debug("i8259_mask_irq(%d)\n", d->irq);
111
112         raw_spin_lock_irqsave(&i8259_lock, flags);
113         if (d->irq < 8)
114                 cached_21 |= 1 << d->irq;
115         else
116                 cached_A1 |= 1 << (d->irq-8);
117         i8259_set_irq_mask(d->irq);
118         raw_spin_unlock_irqrestore(&i8259_lock, flags);
119 }
120
121 static void i8259_unmask_irq(struct irq_data *d)
122 {
123         unsigned long flags;
124
125         pr_debug("i8259_unmask_irq(%d)\n", d->irq);
126
127         raw_spin_lock_irqsave(&i8259_lock, flags);
128         if (d->irq < 8)
129                 cached_21 &= ~(1 << d->irq);
130         else
131                 cached_A1 &= ~(1 << (d->irq-8));
132         i8259_set_irq_mask(d->irq);
133         raw_spin_unlock_irqrestore(&i8259_lock, flags);
134 }
135
136 static struct irq_chip i8259_pic = {
137         .name           = "i8259",
138         .irq_mask       = i8259_mask_irq,
139         .irq_disable    = i8259_mask_irq,
140         .irq_unmask     = i8259_unmask_irq,
141         .irq_mask_ack   = i8259_mask_and_ack_irq,
142 };
143
144 static struct resource pic1_iores = {
145         .name = "8259 (master)",
146         .start = 0x20,
147         .end = 0x21,
148         .flags = IORESOURCE_BUSY,
149 };
150
151 static struct resource pic2_iores = {
152         .name = "8259 (slave)",
153         .start = 0xa0,
154         .end = 0xa1,
155         .flags = IORESOURCE_BUSY,
156 };
157
158 static struct resource pic_edgectrl_iores = {
159         .name = "8259 edge control",
160         .start = 0x4d0,
161         .end = 0x4d1,
162         .flags = IORESOURCE_BUSY,
163 };
164
165 static int i8259_host_match(struct irq_domain *h, struct device_node *node)
166 {
167         return h->of_node == NULL || h->of_node == node;
168 }
169
170 static int i8259_host_map(struct irq_domain *h, unsigned int virq,
171                           irq_hw_number_t hw)
172 {
173         pr_debug("i8259_host_map(%d, 0x%lx)\n", virq, hw);
174
175         /* We block the internal cascade */
176         if (hw == 2)
177                 irq_set_status_flags(virq, IRQ_NOREQUEST);
178
179         /* We use the level handler only for now, we might want to
180          * be more cautious here but that works for now
181          */
182         irq_set_status_flags(virq, IRQ_LEVEL);
183         irq_set_chip_and_handler(virq, &i8259_pic, handle_level_irq);
184         return 0;
185 }
186
187 static int i8259_host_xlate(struct irq_domain *h, struct device_node *ct,
188                             const u32 *intspec, unsigned int intsize,
189                             irq_hw_number_t *out_hwirq, unsigned int *out_flags)
190 {
191         static unsigned char map_isa_senses[4] = {
192                 IRQ_TYPE_LEVEL_LOW,
193                 IRQ_TYPE_LEVEL_HIGH,
194                 IRQ_TYPE_EDGE_FALLING,
195                 IRQ_TYPE_EDGE_RISING,
196         };
197
198         *out_hwirq = intspec[0];
199         if (intsize > 1 && intspec[1] < 4)
200                 *out_flags = map_isa_senses[intspec[1]];
201         else
202                 *out_flags = IRQ_TYPE_NONE;
203
204         return 0;
205 }
206
207 static struct irq_domain_ops i8259_host_ops = {
208         .match = i8259_host_match,
209         .map = i8259_host_map,
210         .xlate = i8259_host_xlate,
211 };
212
213 struct irq_domain *i8259_get_host(void)
214 {
215         return i8259_host;
216 }
217
218 /**
219  * i8259_init - Initialize the legacy controller
220  * @node: device node of the legacy PIC (can be NULL, but then, it will match
221  *        all interrupts, so beware)
222  * @intack_addr: PCI interrupt acknowledge (real) address which will return
223  *               the active irq from the 8259
224  */
225 void i8259_init(struct device_node *node, unsigned long intack_addr)
226 {
227         unsigned long flags;
228
229         /* initialize the controller */
230         raw_spin_lock_irqsave(&i8259_lock, flags);
231
232         /* Mask all first */
233         outb(0xff, 0xA1);
234         outb(0xff, 0x21);
235
236         /* init master interrupt controller */
237         outb(0x11, 0x20); /* Start init sequence */
238         outb(0x00, 0x21); /* Vector base */
239         outb(0x04, 0x21); /* edge tiggered, Cascade (slave) on IRQ2 */
240         outb(0x01, 0x21); /* Select 8086 mode */
241
242         /* init slave interrupt controller */
243         outb(0x11, 0xA0); /* Start init sequence */
244         outb(0x08, 0xA1); /* Vector base */
245         outb(0x02, 0xA1); /* edge triggered, Cascade (slave) on IRQ2 */
246         outb(0x01, 0xA1); /* Select 8086 mode */
247
248         /* That thing is slow */
249         udelay(100);
250
251         /* always read ISR */
252         outb(0x0B, 0x20);
253         outb(0x0B, 0xA0);
254
255         /* Unmask the internal cascade */
256         cached_21 &= ~(1 << 2);
257
258         /* Set interrupt masks */
259         outb(cached_A1, 0xA1);
260         outb(cached_21, 0x21);
261
262         raw_spin_unlock_irqrestore(&i8259_lock, flags);
263
264         /* create a legacy host */
265         i8259_host = irq_domain_add_legacy_isa(node, &i8259_host_ops, NULL);
266         if (i8259_host == NULL) {
267                 printk(KERN_ERR "i8259: failed to allocate irq host !\n");
268                 return;
269         }
270
271         /* reserve our resources */
272         /* XXX should we continue doing that ? it seems to cause problems
273          * with further requesting of PCI IO resources for that range...
274          * need to look into it.
275          */
276         request_resource(&ioport_resource, &pic1_iores);
277         request_resource(&ioport_resource, &pic2_iores);
278         request_resource(&ioport_resource, &pic_edgectrl_iores);
279
280         if (intack_addr != 0)
281                 pci_intack = ioremap(intack_addr, 1);
282
283         printk(KERN_INFO "i8259 legacy interrupt controller initialized\n");
284 }