kernel/arch/powerpc/boot/dts/p3041ds.dts

   1 /*
   2  * P3041DS Device Tree Source
   3  *
   4  * Copyright 2010 - 2014 Freescale Semiconductor Inc.
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions are met:
   8  *     * Redistributions of source code must retain the above copyright
   9  *       notice, this list of conditions and the following disclaimer.
  10  *     * Redistributions in binary form must reproduce the above copyright
  11  *       notice, this list of conditions and the following disclaimer in the
  12  *       documentation and/or other materials provided with the distribution.
  13  *     * Neither the name of Freescale Semiconductor nor the
  14  *       names of its contributors may be used to endorse or promote products
  15  *       derived from this software without specific prior written permission.
  16  *
  17  *
  18  * ALTERNATIVELY, this software may be distributed under the terms of the
  19  * GNU General Public License ("GPL") as published by the Free Software
  20  * Foundation, either version 2 of that License or (at your option) any
  21  * later version.
  22  *
  23  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
  24  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  25  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  26  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
  27  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  28  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  29  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  30  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  31  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  32  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  33  */
  34
  35 /include/ "fsl/p3041si-pre.dtsi"
  36
  37 / {
  38         model = "fsl,P3041DS";
  39         compatible = "fsl,P3041DS";
  40         #address-cells = <2>;
  41         #size-cells = <2>;
  42         interrupt-parent = <&mpic>;
  43
  44         memory {
  45                 device_type = "memory";
  46         };
  47
  48         reserved-memory {
  49                 #address-cells = <2>;
  50                 #size-cells = <2>;
  51                 ranges;
  52
  53                 bman_fbpr: bman-fbpr {
  54                         size = <0 0x1000000>;
  55                         alignment = <0 0x1000000>;
  56                 };
  57         };
  58
  59         dcsr: dcsr@f00000000 {
  60                 ranges = <0x00000000 0xf 0x00000000 0x01008000>;
  61         };
  62
  63         bportals: bman-portals@ff4000000 {
  64                 ranges = <0x0 0xf 0xf4000000 0x200000>;
  65         };
  66
  67         soc: soc@ffe000000 {
  68                 ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
  69                 reg = <0xf 0xfe000000 0 0x00001000>;
  70                 spi@110000 {
  71                         flash@0 {
  72                                 #address-cells = <1>;
  73                                 #size-cells = <1>;
  74                                 compatible = "spansion,s25sl12801";
  75                                 reg = <0>;
  76                                 spi-max-frequency = <35000000>; /* input clock */
  77                                 partition@u-boot {
  78                                         label = "u-boot";
  79                                         reg = <0x00000000 0x00100000>;
  80                                         read-only;
  81                                 };
  82                                 partition@kernel {
  83                                         label = "kernel";
  84                                         reg = <0x00100000 0x00500000>;
  85                                         read-only;
  86                                 };
  87                                 partition@dtb {
  88                                         label = "dtb";
  89                                         reg = <0x00600000 0x00100000>;
  90                                         read-only;
  91                                 };
  92                                 partition@fs {
  93                                         label = "file system";
  94                                         reg = <0x00700000 0x00900000>;
  95                                 };
  96                         };
  97                 };
  98
  99                 i2c@118100 {
 100                         eeprom@51 {
 101                                 compatible = "at24,24c256";
 102                                 reg = <0x51>;
 103                         };
 104                         eeprom@52 {
 105                                 compatible = "at24,24c256";
 106                                 reg = <0x52>;
 107                         };
 108                 };
 109
 110                 i2c@119100 {
 111                         rtc@68 {
 112                                 compatible = "dallas,ds3232";
 113                                 reg = <0x68>;
 114                                 interrupts = <0x1 0x1 0 0>;
 115                         };
 116                         ina220@40 {
 117                                 compatible = "ti,ina220";
 118                                 reg = <0x40>;
 119                                 shunt-resistor = <1000>;
 120                         };
 121                         ina220@41 {
 122                                 compatible = "ti,ina220";
 123                                 reg = <0x41>;
 124                                 shunt-resistor = <1000>;
 125                         };
 126                         ina220@44 {
 127                                 compatible = "ti,ina220";
 128                                 reg = <0x44>;
 129                                 shunt-resistor = <1000>;
 130                         };
 131                         ina220@45 {
 132                                 compatible = "ti,ina220";
 133                                 reg = <0x45>;
 134                                 shunt-resistor = <1000>;
 135                         };
 136                         adt7461@4c {
 137                                 compatible = "adi,adt7461";
 138                                 reg = <0x4c>;
 139                         };
 140                 };
 141         };
 142
 143         rio: rapidio@ffe0c0000 {
 144                 reg = <0xf 0xfe0c0000 0 0x11000>;
 145
 146                 port1 {
 147                         ranges = <0 0 0xc 0x20000000 0 0x10000000>;
 148                 };
 149                 port2 {
 150                         ranges = <0 0 0xc 0x30000000 0 0x10000000>;
 151                 };
 152         };
 153
 154         lbc: localbus@ffe124000 {
 155                 reg = <0xf 0xfe124000 0 0x1000>;
 156                 ranges = <0 0 0xf 0xe8000000 0x08000000
 157                           2 0 0xf 0xffa00000 0x00040000
 158                           3 0 0xf 0xffdf0000 0x00008000>;
 159
 160                 flash@0,0 {
 161                         compatible = "cfi-flash";
 162                         reg = <0 0 0x08000000>;
 163                         bank-width = <2>;
 164                         device-width = <2>;
 165                 };
 166
 167                 nand@2,0 {
 168                         #address-cells = <1>;
 169                         #size-cells = <1>;
 170                         compatible = "fsl,elbc-fcm-nand";
 171                         reg = <0x2 0x0 0x40000>;
 172
 173                         partition@0 {
 174                                 label = "NAND U-Boot Image";
 175                                 reg = <0x0 0x02000000>;
 176                                 read-only;
 177                         };
 178
 179                         partition@2000000 {
 180                                 label = "NAND Root File System";
 181                                 reg = <0x02000000 0x10000000>;
 182                         };
 183
 184                         partition@12000000 {
 185                                 label = "NAND Compressed RFS Image";
 186                                 reg = <0x12000000 0x08000000>;
 187                         };
 188
 189                         partition@1a000000 {
 190                                 label = "NAND Linux Kernel Image";
 191                                 reg = <0x1a000000 0x04000000>;
 192                         };
 193
 194                         partition@1e000000 {
 195                                 label = "NAND DTB Image";
 196                                 reg = <0x1e000000 0x01000000>;
 197                         };
 198
 199                         partition@1f000000 {
 200                                 label = "NAND Writable User area";
 201                                 reg = <0x1f000000 0x21000000>;
 202                         };
 203                 };
 204
 205                 board-control@3,0 {
 206                         compatible = "fsl,p3041ds-fpga", "fsl,fpga-ngpixis";
 207                         reg = <3 0 0x30>;
 208                 };
 209         };
 210
 211         pci0: pcie@ffe200000 {
 212                 reg = <0xf 0xfe200000 0 0x1000>;
 213                 ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
 214                           0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
 215                 pcie@0 {
 216                         ranges = <0x02000000 0 0xe0000000
 217                                   0x02000000 0 0xe0000000
 218                                   0 0x20000000
 219
 220                                   0x01000000 0 0x00000000
 221                                   0x01000000 0 0x00000000
 222                                   0 0x00010000>;
 223                 };
 224         };
 225
 226         pci1: pcie@ffe201000 {
 227                 reg = <0xf 0xfe201000 0 0x1000>;
 228                 ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
 229                           0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
 230                 pcie@0 {
 231                         ranges = <0x02000000 0 0xe0000000
 232                                   0x02000000 0 0xe0000000
 233                                   0 0x20000000
 234
 235                                   0x01000000 0 0x00000000
 236                                   0x01000000 0 0x00000000
 237                                   0 0x00010000>;
 238                 };
 239         };
 240
 241         pci2: pcie@ffe202000 {
 242                 reg = <0xf 0xfe202000 0 0x1000>;
 243                 ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
 244                           0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
 245                 pcie@0 {
 246                         ranges = <0x02000000 0 0xe0000000
 247                                   0x02000000 0 0xe0000000
 248                                   0 0x20000000
 249
 250                                   0x01000000 0 0x00000000
 251                                   0x01000000 0 0x00000000
 252                                   0 0x00010000>;
 253                 };
 254         };
 255
 256         pci3: pcie@ffe203000 {
 257                 reg = <0xf 0xfe203000 0 0x1000>;
 258                 ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
 259                           0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
 260                 pcie@0 {
 261                         ranges = <0x02000000 0 0xe0000000
 262                                   0x02000000 0 0xe0000000
 263                                   0 0x20000000
 264
 265                                   0x01000000 0 0x00000000
 266                                   0x01000000 0 0x00000000
 267                                   0 0x00010000>;
 268                 };
 269         };
 270 };
 271
 272 /include/ "fsl/p3041si-post.dtsi"