kernel/arch/powerpc/boot/dts/motionpro.dts

   1 /*
   2  * Motion-PRO board Device Tree Source
   3  *
   4  * Copyright (C) 2007 Semihalf
   5  * Marian Balakowicz <m8@semihalf.com>
   6  *
   7  * This program is free software; you can redistribute  it and/or modify it
   8  * under  the terms of  the GNU General  Public License as published by the
   9  * Free Software Foundation;  either version 2 of the  License, or (at your
  10  * option) any later version.
  11  */
  12
  13 /include/ "mpc5200b.dtsi"
  14
  15 &gpt0 { fsl,has-wdt; };
  16 &gpt6 { // Motion-PRO status LED
  17         compatible = "promess,motionpro-led";
  18         label = "motionpro-statusled";
  19         blink-delay = <100>; // 100 msec
  20 };
  21 &gpt7 { // Motion-PRO ready LED
  22         compatible = "promess,motionpro-led";
  23         label = "motionpro-readyled";
  24 };
  25
  26 / {
  27         model = "promess,motionpro";
  28         compatible = "promess,motionpro";
  29
  30         soc5200@f0000000 {
  31                 can@900 {
  32                         status = "disabled";
  33                 };
  34
  35                 psc@2000 {              // PSC1
  36                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
  37                 };
  38
  39                 // PSC2 in spi master mode
  40                 psc@2200 {              // PSC2
  41                         compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
  42                         cell-index = <1>;
  43                 };
  44
  45                 psc@2400 {              // PSC3
  46                         status = "disabled";
  47                 };
  48
  49                 psc@2600 {              // PSC4
  50                         status = "disabled";
  51                 };
  52
  53                 psc@2800 {              // PSC5
  54                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
  55                 };
  56
  57                 psc@2c00 {              // PSC6
  58                         status = "disabled";
  59                 };
  60
  61                 ethernet@3000 {
  62                         phy-handle = <&phy0>;
  63                 };
  64
  65                 mdio@3000 {
  66                         phy0: ethernet-phy@2 {
  67                                 reg = <2>;
  68                         };
  69                 };
  70
  71                 i2c@3d00 {
  72                         status = "disabled";
  73                 };
  74
  75                 i2c@3d40 {
  76                         rtc@68 {
  77                                 compatible = "dallas,ds1339";
  78                                 reg = <0x68>;
  79                         };
  80                 };
  81
  82                 sram@8000 {
  83                         compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
  84                         reg = <0x8000 0x4000>;
  85                 };
  86         };
  87
  88         pci@f0000d00 {
  89                 status = "disabled";
  90         };
  91
  92         localbus {
  93                 ranges = <0 0 0xff000000 0x01000000
  94                           1 0 0x50000000 0x00010000
  95                           2 0 0x50010000 0x00010000
  96                           3 0 0x50020000 0x00010000>;
  97
  98                 // 8-bit DualPort SRAM on LocalPlus Bus CS1
  99                 kollmorgen@1,0 {
 100                         compatible = "promess,motionpro-kollmorgen";
 101                         reg = <1 0 0x10000>;
 102                         interrupts = <1 1 0>;
 103                 };
 104
 105                 // 8-bit board CPLD on LocalPlus Bus CS2
 106                 cpld@2,0 {
 107                         compatible = "promess,motionpro-cpld";
 108                         reg = <2 0 0x10000>;
 109                 };
 110
 111                 // 8-bit custom Anybus Module on LocalPlus Bus CS3
 112                 anybus@3,0 {
 113                         compatible = "promess,motionpro-anybus";
 114                         reg = <3 0 0x10000>;
 115                 };
 116                 pro_module_general@3,0 {
 117                         compatible = "promess,pro_module_general";
 118                         reg = <3 0 3>;
 119                 };
 120                 pro_module_dio@3,800 {
 121                         compatible = "promess,pro_module_dio";
 122                         reg = <3 0x800 2>;
 123                 };
 124
 125                 // 16-bit flash device at LocalPlus Bus CS0
 126                 flash@0,0 {
 127                         compatible = "cfi-flash";
 128                         reg = <0 0 0x01000000>;
 129                         bank-width = <2>;
 130                         device-width = <2>;
 131                         #size-cells = <1>;
 132                         #address-cells = <1>;
 133                 };
 134
 135         };
 136 };