kernel/arch/powerpc/boot/dts/asp834x-redboot.dts

   1 /*
   2  * Analogue & Micro ASP8347 Device Tree Source
   3  *
   4  * Copyright 2008 Codehermit
   5  *
   6  * This program is free software; you can redistribute  it and/or modify it
   7  * under  the terms of  the GNU General  Public License as published by the
   8  * Free Software Foundation;  either version 2 of the  License, or (at your
   9  * option) any later version.
  10  */
  11
  12 /dts-v1/;
  13
  14 / {
  15         model = "Analogue & Micro ASP8347E";
  16         compatible = "analogue-and-micro,asp8347e";
  17         #address-cells = <1>;
  18         #size-cells = <1>;
  19
  20         aliases {
  21                 ethernet0 = &enet0;
  22                 ethernet1 = &enet1;
  23                 serial0 = &serial0;
  24                 serial1 = &serial1;
  25         };
  26
  27         cpus {
  28                 #address-cells = <1>;
  29                 #size-cells = <0>;
  30
  31                 PowerPC,8347@0 {
  32                         device_type = "cpu";
  33                         reg = <0x0>;
  34                         d-cache-line-size = <32>;
  35                         i-cache-line-size = <32>;
  36                         d-cache-size = <32768>;
  37                         i-cache-size = <32768>;
  38                         timebase-frequency = <0>;       // from bootloader
  39                         bus-frequency = <0>;            // from bootloader
  40                         clock-frequency = <0>;          // from bootloader
  41                 };
  42         };
  43
  44         memory {
  45                 device_type = "memory";
  46                 reg = <0x00000000 0x8000000>;   // 128MB at 0
  47         };
  48
  49         localbus@ff005000 {
  50                 #address-cells = <2>;
  51                 #size-cells = <1>;
  52                 compatible = "fsl,mpc8347e-localbus",
  53                              "fsl,pq2pro-localbus",
  54                              "simple-bus";
  55                 reg = <0xff005000 0x1000>;
  56                 interrupts = <77 0x8>;
  57                 interrupt-parent = <&ipic>;
  58
  59                 ranges = <
  60                         0 0 0xf0000000 0x02000000
  61                 >;
  62
  63                 flash@0,0 {
  64                         compatible = "cfi-flash";
  65                         reg = <0 0 0x02000000>;
  66                         bank-width = <2>;
  67                         device-width = <2>;
  68                 };
  69         };
  70
  71         soc8349@ff000000 {
  72                 #address-cells = <1>;
  73                 #size-cells = <1>;
  74                 device_type = "soc";
  75                 ranges = <0x0 0xff000000 0x00100000>;
  76                 reg = <0xff000000 0x00000200>;
  77                 bus-frequency = <0>;
  78
  79                 wdt@200 {
  80                         device_type = "watchdog";
  81                         compatible = "mpc83xx_wdt";
  82                         reg = <0x200 0x100>;
  83                 };
  84
  85                 i2c@3000 {
  86                         #address-cells = <1>;
  87                         #size-cells = <0>;
  88                         cell-index = <0>;
  89                         compatible = "fsl-i2c";
  90                         reg = <0x3000 0x100>;
  91                         interrupts = <14 0x8>;
  92                         interrupt-parent = <&ipic>;
  93                         dfsrr;
  94
  95                         rtc@68 {
  96                                 compatible = "dallas,ds1374";
  97                                 reg = <0x68>;
  98                         };
  99                 };
 100
 101                 i2c@3100 {
 102                         #address-cells = <1>;
 103                         #size-cells = <0>;
 104                         cell-index = <1>;
 105                         compatible = "fsl-i2c";
 106                         reg = <0x3100 0x100>;
 107                         interrupts = <15 0x8>;
 108                         interrupt-parent = <&ipic>;
 109                         dfsrr;
 110                 };
 111
 112                 spi@7000 {
 113                         cell-index = <0>;
 114                         compatible = "fsl,spi";
 115                         reg = <0x7000 0x1000>;
 116                         interrupts = <16 0x8>;
 117                         interrupt-parent = <&ipic>;
 118                         mode = "cpu";
 119                 };
 120
 121                 dma@82a8 {
 122                         #address-cells = <1>;
 123                         #size-cells = <1>;
 124                         compatible = "fsl,mpc8347-dma", "fsl,elo-dma";
 125                         reg = <0x82a8 4>;
 126                         ranges = <0 0x8100 0x1a8>;
 127                         interrupt-parent = <&ipic>;
 128                         interrupts = <71 8>;
 129                         cell-index = <0>;
 130                         dma-channel@0 {
 131                                 compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
 132                                 reg = <0 0x80>;
 133                                 cell-index = <0>;
 134                                 interrupt-parent = <&ipic>;
 135                                 interrupts = <71 8>;
 136                         };
 137                         dma-channel@80 {
 138                                 compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
 139                                 reg = <0x80 0x80>;
 140                                 cell-index = <1>;
 141                                 interrupt-parent = <&ipic>;
 142                                 interrupts = <71 8>;
 143                         };
 144                         dma-channel@100 {
 145                                 compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
 146                                 reg = <0x100 0x80>;
 147                                 cell-index = <2>;
 148                                 interrupt-parent = <&ipic>;
 149                                 interrupts = <71 8>;
 150                         };
 151                         dma-channel@180 {
 152                                 compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
 153                                 reg = <0x180 0x28>;
 154                                 cell-index = <3>;
 155                                 interrupt-parent = <&ipic>;
 156                                 interrupts = <71 8>;
 157                         };
 158                 };
 159
 160                 /* phy type (ULPI or SERIAL) are only types supported for MPH */
 161                 /* port = 0 or 1 */
 162                 usb@22000 {
 163                         compatible = "fsl-usb2-mph";
 164                         reg = <0x22000 0x1000>;
 165                         #address-cells = <1>;
 166                         #size-cells = <0>;
 167                         interrupt-parent = <&ipic>;
 168                         interrupts = <39 0x8>;
 169                         phy_type = "ulpi";
 170                         port0;
 171                 };
 172                 /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
 173                 usb@23000 {
 174                         compatible = "fsl-usb2-dr";
 175                         reg = <0x23000 0x1000>;
 176                         #address-cells = <1>;
 177                         #size-cells = <0>;
 178                         interrupt-parent = <&ipic>;
 179                         interrupts = <38 0x8>;
 180                         dr_mode = "otg";
 181                         phy_type = "ulpi";
 182                 };
 183
 184                 enet0: ethernet@24000 {
 185                         #address-cells = <1>;
 186                         #size-cells = <1>;
 187                         cell-index = <0>;
 188                         device_type = "network";
 189                         model = "TSEC";
 190                         compatible = "gianfar";
 191                         reg = <0x24000 0x1000>;
 192                         ranges = <0x0 0x24000 0x1000>;
 193                         local-mac-address = [ 00 08 e5 11 32 33 ];
 194                         interrupts = <32 0x8 33 0x8 34 0x8>;
 195                         interrupt-parent = <&ipic>;
 196                         tbi-handle = <&tbi0>;
 197                         phy-handle = <&phy0>;
 198                         linux,network-index = <0>;
 199
 200                         mdio@520 {
 201                                 #address-cells = <1>;
 202                                 #size-cells = <0>;
 203                                 compatible = "fsl,gianfar-mdio";
 204                                 reg = <0x520 0x20>;
 205
 206                                 phy0: ethernet-phy@0 {
 207                                         interrupt-parent = <&ipic>;
 208                                         interrupts = <17 0x8>;
 209                                         reg = <0x1>;
 210                                 };
 211
 212                                 phy1: ethernet-phy@1 {
 213                                         interrupt-parent = <&ipic>;
 214                                         interrupts = <18 0x8>;
 215                                         reg = <0x2>;
 216                                 };
 217
 218                                 tbi0: tbi-phy@11 {
 219                                         reg = <0x11>;
 220                                         device_type = "tbi-phy";
 221                                 };
 222                         };
 223                 };
 224
 225                 enet1: ethernet@25000 {
 226                         #address-cells = <1>;
 227                         #size-cells = <1>;
 228                         cell-index = <1>;
 229                         device_type = "network";
 230                         model = "TSEC";
 231                         compatible = "gianfar";
 232                         reg = <0x25000 0x1000>;
 233                         ranges = <0x0 0x25000 0x1000>;
 234                         local-mac-address = [ 00 08 e5 11 32 34 ];
 235                         interrupts = <35 0x8 36 0x8 37 0x8>;
 236                         interrupt-parent = <&ipic>;
 237                         tbi-handle = <&tbi1>;
 238                         phy-handle = <&phy1>;
 239                         linux,network-index = <1>;
 240
 241                         mdio@520 {
 242                                 #address-cells = <1>;
 243                                 #size-cells = <0>;
 244                                 compatible = "fsl,gianfar-tbi";
 245                                 reg = <0x520 0x20>;
 246
 247                                 tbi1: tbi-phy@11 {
 248                                         reg = <0x11>;
 249                                         device_type = "tbi-phy";
 250                                 };
 251                         };
 252                 };
 253
 254                 serial0: serial@4500 {
 255                         cell-index = <0>;
 256                         device_type = "serial";
 257                         compatible = "fsl,ns16550", "ns16550";
 258                         reg = <0x4500 0x100>;
 259                         clock-frequency = <400000000>;
 260                         interrupts = <9 0x8>;
 261                         interrupt-parent = <&ipic>;
 262                 };
 263
 264                 serial1: serial@4600 {
 265                         cell-index = <1>;
 266                         device_type = "serial";
 267                         compatible = "fsl,ns16550", "ns16550";
 268                         reg = <0x4600 0x100>;
 269                         clock-frequency = <400000000>;
 270                         interrupts = <10 0x8>;
 271                         interrupt-parent = <&ipic>;
 272                 };
 273
 274                 /* May need to remove if on a part without crypto engine */
 275                 crypto@30000 {
 276                         device_type = "crypto";
 277                         model = "SEC2";
 278                         compatible = "talitos";
 279                         reg = <0x30000 0x10000>;
 280                         interrupts = <11 0x8>;
 281                         interrupt-parent = <&ipic>;
 282                         num-channels = <4>;
 283                         channel-fifo-len = <24>;
 284                         exec-units-mask = <0x0000007e>;
 285                         /* desc mask is for rev2.0,
 286                          * we need runtime fixup for >2.0 */
 287                         descriptor-types-mask = <0x01010ebf>;
 288                 };
 289
 290                 /* IPIC
 291                  * interrupts cell = <intr #, sense>
 292                  * sense values match linux IORESOURCE_IRQ_* defines:
 293                  * sense == 8: Level, low assertion
 294                  * sense == 2: Edge, high-to-low change
 295                  */
 296                 ipic: pic@700 {
 297                         interrupt-controller;
 298                         #address-cells = <0>;
 299                         #interrupt-cells = <2>;
 300                         reg = <0x700 0x100>;
 301                         device_type = "ipic";
 302                 };
 303         };
 304
 305         chosen {
 306                 bootargs = "console=ttyS0,38400 root=/dev/mtdblock3 rootfstype=jffs2";
 307                 linux,stdout-path = &serial0;
 308         };
 309
 310 };