kernel/arch/mn10300/proc-mn2ws0050/proc-init.c

   1 /* MN2WS0050 processor initialisation
   2  *
   3  * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved.
   4  * Written by David Howells (dhowells@redhat.com)
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License
   8  * as published by the Free Software Foundation; either version
   9  * 2 of the License, or (at your option) any later version.
  10  */
  11 #include <linux/sched.h>
  12 #include <linux/kernel.h>
  13 #include <linux/init.h>
  14 #include <linux/delay.h>
  15 #include <linux/interrupt.h>
  16
  17 #include <asm/processor.h>
  18 #include <asm/uaccess.h>
  19 #include <asm/io.h>
  20 #include <linux/atomic.h>
  21 #include <asm/smp.h>
  22 #include <asm/pgalloc.h>
  23 #include <asm/busctl-regs.h>
  24 #include <unit/timex.h>
  25 #include <asm/fpu.h>
  26 #include <asm/rtc.h>
  27
  28 #define MEMCONF __SYSREGC(0xdf800400, u32)
  29
  30 /*
  31  * initialise the on-silicon processor peripherals
  32  */
  33 asmlinkage void __init processor_init(void)
  34 {
  35         int loop;
  36
  37         /* set up the exception table first */
  38         for (loop = 0x000; loop < 0x400; loop += 8)
  39                 __set_intr_stub(loop, __common_exception);
  40
  41         __set_intr_stub(EXCEP_ITLBMISS,         itlb_miss);
  42         __set_intr_stub(EXCEP_DTLBMISS,         dtlb_miss);
  43         __set_intr_stub(EXCEP_IAERROR,          itlb_aerror);
  44         __set_intr_stub(EXCEP_DAERROR,          dtlb_aerror);
  45         __set_intr_stub(EXCEP_BUSERROR,         raw_bus_error);
  46         __set_intr_stub(EXCEP_DOUBLE_FAULT,     double_fault);
  47         __set_intr_stub(EXCEP_FPU_DISABLED,     fpu_disabled);
  48         __set_intr_stub(EXCEP_SYSCALL0,         system_call);
  49
  50         __set_intr_stub(EXCEP_NMI,              nmi_handler);
  51         __set_intr_stub(EXCEP_WDT,              nmi_handler);
  52         __set_intr_stub(EXCEP_IRQ_LEVEL0,       irq_handler);
  53         __set_intr_stub(EXCEP_IRQ_LEVEL1,       irq_handler);
  54         __set_intr_stub(EXCEP_IRQ_LEVEL2,       irq_handler);
  55         __set_intr_stub(EXCEP_IRQ_LEVEL3,       irq_handler);
  56         __set_intr_stub(EXCEP_IRQ_LEVEL4,       irq_handler);
  57         __set_intr_stub(EXCEP_IRQ_LEVEL5,       irq_handler);
  58         __set_intr_stub(EXCEP_IRQ_LEVEL6,       irq_handler);
  59
  60         IVAR0 = EXCEP_IRQ_LEVEL0;
  61         IVAR1 = EXCEP_IRQ_LEVEL1;
  62         IVAR2 = EXCEP_IRQ_LEVEL2;
  63         IVAR3 = EXCEP_IRQ_LEVEL3;
  64         IVAR4 = EXCEP_IRQ_LEVEL4;
  65         IVAR5 = EXCEP_IRQ_LEVEL5;
  66         IVAR6 = EXCEP_IRQ_LEVEL6;
  67
  68 #ifndef CONFIG_MN10300_HAS_CACHE_SNOOP
  69         mn10300_dcache_flush_inv();
  70         mn10300_icache_inv();
  71 #endif
  72
  73         /* disable all interrupts and set to priority 6 (lowest) */
  74 #ifdef  CONFIG_SMP
  75         for (loop = 0; loop < GxICR_NUM_IRQS; loop++)
  76                 GxICR(loop) = GxICR_LEVEL_6 | GxICR_DETECT;
  77 #else   /* !CONFIG_SMP */
  78         for (loop = 0; loop < NR_IRQS; loop++)
  79                 GxICR(loop) = GxICR_LEVEL_6 | GxICR_DETECT;
  80 #endif  /* !CONFIG_SMP */
  81
  82         /* clear the timers */
  83         TM0MD   = 0;
  84         TM1MD   = 0;
  85         TM2MD   = 0;
  86         TM3MD   = 0;
  87         TM4MD   = 0;
  88         TM5MD   = 0;
  89         TM6MD   = 0;
  90         TM6MDA  = 0;
  91         TM6MDB  = 0;
  92         TM7MD   = 0;
  93         TM8MD   = 0;
  94         TM9MD   = 0;
  95         TM10MD  = 0;
  96         TM11MD  = 0;
  97         TM12MD  = 0;
  98         TM13MD  = 0;
  99         TM14MD  = 0;
 100         TM15MD  = 0;
 101
 102         calibrate_clock();
 103 }
 104
 105 /*
 106  * determine the memory size and base from the memory controller regs
 107  */
 108 void __init get_mem_info(unsigned long *mem_base, unsigned long *mem_size)
 109 {
 110         unsigned long memconf = MEMCONF;
 111         unsigned long size = 0; /* order: MByte */
 112
 113         *mem_base = 0x90000000; /* fixed address */
 114
 115         switch (memconf & 0x00000003) {
 116         case 0x01:
 117                 size = 256 / 8;         /* 256 Mbit per chip */
 118                 break;
 119         case 0x02:
 120                 size = 512 / 8;         /* 512 Mbit per chip */
 121                 break;
 122         case 0x03:
 123                 size = 1024 / 8;        /*   1 Gbit per chip */
 124                 break;
 125         default:
 126                 panic("Invalid SDRAM size");
 127                 break;
 128         }
 129
 130         printk(KERN_INFO "DDR2-SDRAM: %luMB x 2 @%08lx\n", size, *mem_base);
 131
 132         *mem_size = (size * 2) << 20;
 133 }