Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / arch / mips / netlogic / xlp / setup.c
1 /*
2  * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
3  * reserved.
4  *
5  * This software is available to you under a choice of one of two
6  * licenses.  You may choose to be licensed under the terms of the GNU
7  * General Public License (GPL) Version 2, available from the file
8  * COPYING in the main directory of this source tree, or the NetLogic
9  * license below:
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  *
15  * 1. Redistributions of source code must retain the above copyright
16  *    notice, this list of conditions and the following disclaimer.
17  * 2. Redistributions in binary form must reproduce the above copyright
18  *    notice, this list of conditions and the following disclaimer in
19  *    the documentation and/or other materials provided with the
20  *    distribution.
21  *
22  * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
23  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
24  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25  * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
26  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
27  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
28  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
29  * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
30  * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
31  * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
32  * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33  */
34
35 #include <linux/kernel.h>
36 #include <linux/of_fdt.h>
37
38 #include <asm/idle.h>
39 #include <asm/reboot.h>
40 #include <asm/time.h>
41 #include <asm/bootinfo.h>
42
43 #include <asm/netlogic/haldefs.h>
44 #include <asm/netlogic/common.h>
45
46 #include <asm/netlogic/xlp-hal/iomap.h>
47 #include <asm/netlogic/xlp-hal/xlp.h>
48 #include <asm/netlogic/xlp-hal/sys.h>
49
50 uint64_t nlm_io_base;
51 struct nlm_soc_info nlm_nodes[NLM_NR_NODES];
52 cpumask_t nlm_cpumask = CPU_MASK_CPU0;
53 unsigned int nlm_threads_per_core;
54
55 static void nlm_linux_exit(void)
56 {
57         uint64_t sysbase = nlm_get_node(0)->sysbase;
58
59         if (cpu_is_xlp9xx())
60                 nlm_write_sys_reg(sysbase, SYS_9XX_CHIP_RESET, 1);
61         else
62                 nlm_write_sys_reg(sysbase, SYS_CHIP_RESET, 1);
63         for ( ; ; )
64                 cpu_wait();
65 }
66
67 static void nlm_fixup_mem(void)
68 {
69         const int pref_backup = 512;
70         int i;
71
72         for (i = 0; i < boot_mem_map.nr_map; i++) {
73                 if (boot_mem_map.map[i].type != BOOT_MEM_RAM)
74                         continue;
75                 boot_mem_map.map[i].size -= pref_backup;
76         }
77 }
78
79 static void __init xlp_init_mem_from_bars(void)
80 {
81         uint64_t map[16];
82         int i, n;
83
84         n = nlm_get_dram_map(-1, map, ARRAY_SIZE(map)); /* -1 : all nodes */
85         for (i = 0; i < n; i += 2) {
86                 /* exclude 0x1000_0000-0x2000_0000, u-boot device */
87                 if (map[i] <= 0x10000000 && map[i+1] > 0x10000000)
88                         map[i+1] = 0x10000000;
89                 if (map[i] > 0x10000000 && map[i] < 0x20000000)
90                         map[i] = 0x20000000;
91
92                 add_memory_region(map[i], map[i+1] - map[i], BOOT_MEM_RAM);
93         }
94 }
95
96 void __init plat_mem_setup(void)
97 {
98 #ifdef CONFIG_SMP
99         nlm_wakeup_secondary_cpus();
100
101         /* update TLB size after waking up threads */
102         current_cpu_data.tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1;
103
104         register_smp_ops(&nlm_smp_ops);
105 #endif
106         _machine_restart = (void (*)(char *))nlm_linux_exit;
107         _machine_halt   = nlm_linux_exit;
108         pm_power_off    = nlm_linux_exit;
109
110         /* memory and bootargs from DT */
111         xlp_early_init_devtree();
112
113         if (boot_mem_map.nr_map == 0) {
114                 pr_info("Using DRAM BARs for memory map.\n");
115                 xlp_init_mem_from_bars();
116         }
117         /* Calculate and setup wired entries for mapped kernel */
118         nlm_fixup_mem();
119 }
120
121 const char *get_system_type(void)
122 {
123         switch (read_c0_prid() & PRID_IMP_MASK) {
124         case PRID_IMP_NETLOGIC_XLP9XX:
125         case PRID_IMP_NETLOGIC_XLP5XX:
126         case PRID_IMP_NETLOGIC_XLP2XX:
127                 return "Broadcom XLPII Series";
128         default:
129                 return "Netlogic XLP Series";
130         }
131 }
132
133 void __init prom_free_prom_memory(void)
134 {
135         /* Nothing yet */
136 }
137
138 void xlp_mmu_init(void)
139 {
140         u32 conf4;
141
142         if (cpu_is_xlpii()) {
143                 /* XLPII series has extended pagesize in config 4 */
144                 conf4 = read_c0_config4() & ~0x1f00u;
145                 write_c0_config4(conf4 | ((PAGE_SHIFT - 10) / 2 << 8));
146         } else {
147                 /* enable extended TLB and Large Fixed TLB */
148                 write_c0_config6(read_c0_config6() | 0x24);
149
150                 /* set page mask of extended Fixed TLB in config7 */
151                 write_c0_config7(PM_DEFAULT_MASK >>
152                         (13 + (ffz(PM_DEFAULT_MASK >> 13) / 2)));
153         }
154 }
155
156 void nlm_percpu_init(int hwcpuid)
157 {
158 }
159
160 void __init prom_init(void)
161 {
162         void *reset_vec;
163
164         nlm_io_base = CKSEG1ADDR(XLP_DEFAULT_IO_BASE);
165         nlm_init_boot_cpu();
166         xlp_mmu_init();
167         nlm_node_init(0);
168         xlp_dt_init((void *)(long)fw_arg0);
169
170         /* Update reset entry point with CPU init code */
171         reset_vec = (void *)CKSEG1ADDR(RESET_VEC_PHYS);
172         memset(reset_vec, 0, RESET_VEC_SIZE);
173         memcpy(reset_vec, (void *)nlm_reset_entry,
174                         (nlm_reset_entry_end - nlm_reset_entry));
175
176 #ifdef CONFIG_SMP
177         cpumask_setall(&nlm_cpumask);
178 #endif
179 }