Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / arch / mips / netlogic / xlp / cop2-ex.c
1 /*
2  * This file is subject to the terms and conditions of the GNU General Public
3  * License.  See the file "COPYING" in the main directory of this archive
4  * for more details.
5  *
6  * Copyright (C) 2013 Broadcom Corporation.
7  *
8  * based on arch/mips/cavium-octeon/cpu.c
9  * Copyright (C) 2009 Wind River Systems,
10  *   written by Ralf Baechle <ralf@linux-mips.org>
11  */
12 #include <linux/init.h>
13 #include <linux/irqflags.h>
14 #include <linux/notifier.h>
15 #include <linux/prefetch.h>
16 #include <linux/sched.h>
17
18 #include <asm/cop2.h>
19 #include <asm/current.h>
20 #include <asm/mipsregs.h>
21 #include <asm/page.h>
22
23 #include <asm/netlogic/mips-extns.h>
24
25 /*
26  * 64 bit ops are done in inline assembly to support 32 bit
27  * compilation
28  */
29 void nlm_cop2_save(struct nlm_cop2_state *r)
30 {
31         asm volatile(
32                 ".set   push\n"
33                 ".set   noat\n"
34                 "dmfc2  $1, $0, 0\n"
35                 "sd     $1, 0(%1)\n"
36                 "dmfc2  $1, $0, 1\n"
37                 "sd     $1, 8(%1)\n"
38                 "dmfc2  $1, $0, 2\n"
39                 "sd     $1, 16(%1)\n"
40                 "dmfc2  $1, $0, 3\n"
41                 "sd     $1, 24(%1)\n"
42                 "dmfc2  $1, $1, 0\n"
43                 "sd     $1, 0(%2)\n"
44                 "dmfc2  $1, $1, 1\n"
45                 "sd     $1, 8(%2)\n"
46                 "dmfc2  $1, $1, 2\n"
47                 "sd     $1, 16(%2)\n"
48                 "dmfc2  $1, $1, 3\n"
49                 "sd     $1, 24(%2)\n"
50                 ".set   pop\n"
51                 : "=m"(*r)
52                 : "r"(r->tx), "r"(r->rx));
53
54         r->tx_msg_status = __read_32bit_c2_register($2, 0);
55         r->rx_msg_status = __read_32bit_c2_register($3, 0) & 0x0fffffff;
56 }
57
58 void nlm_cop2_restore(struct nlm_cop2_state *r)
59 {
60         u32 rstat;
61
62         asm volatile(
63                 ".set   push\n"
64                 ".set   noat\n"
65                 "ld     $1, 0(%1)\n"
66                 "dmtc2  $1, $0, 0\n"
67                 "ld     $1, 8(%1)\n"
68                 "dmtc2  $1, $0, 1\n"
69                 "ld     $1, 16(%1)\n"
70                 "dmtc2  $1, $0, 2\n"
71                 "ld     $1, 24(%1)\n"
72                 "dmtc2  $1, $0, 3\n"
73                 "ld     $1, 0(%2)\n"
74                 "dmtc2  $1, $1, 0\n"
75                 "ld     $1, 8(%2)\n"
76                 "dmtc2  $1, $1, 1\n"
77                 "ld     $1, 16(%2)\n"
78                 "dmtc2  $1, $1, 2\n"
79                 "ld     $1, 24(%2)\n"
80                 "dmtc2  $1, $1, 3\n"
81                 ".set   pop\n"
82                 : : "m"(*r), "r"(r->tx), "r"(r->rx));
83
84         __write_32bit_c2_register($2, 0, r->tx_msg_status);
85         rstat = __read_32bit_c2_register($3, 0) & 0xf0000000u;
86         __write_32bit_c2_register($3, 0, r->rx_msg_status | rstat);
87 }
88
89 static int nlm_cu2_call(struct notifier_block *nfb, unsigned long action,
90         void *data)
91 {
92         unsigned long flags;
93         unsigned int status;
94
95         switch (action) {
96         case CU2_EXCEPTION:
97                 if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
98                         break;
99                 local_irq_save(flags);
100                 KSTK_STATUS(current) |= ST0_CU2;
101                 status = read_c0_status();
102                 write_c0_status(status | ST0_CU2);
103                 nlm_cop2_restore(&(current->thread.cp2));
104                 write_c0_status(status & ~ST0_CU2);
105                 local_irq_restore(flags);
106                 pr_info("COP2 access enabled for pid %d (%s)\n",
107                                         current->pid, current->comm);
108                 return NOTIFY_BAD;      /* Don't call default notifier */
109         }
110
111         return NOTIFY_OK;               /* Let default notifier send signals */
112 }
113
114 static int __init nlm_cu2_setup(void)
115 {
116         return cu2_notifier(nlm_cu2_call, 0);
117 }
118 early_initcall(nlm_cu2_setup);