Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / arch / mips / kernel / vmlinux.lds.S
1 #include <asm/asm-offsets.h>
2 #include <asm/thread_info.h>
3
4 #define PAGE_SIZE _PAGE_SIZE
5
6 /*
7  * Put .bss..swapper_pg_dir as the first thing in .bss. This will
8  * ensure that it has .bss alignment (64K).
9  */
10 #define BSS_FIRST_SECTIONS *(.bss..swapper_pg_dir)
11
12 #include <asm-generic/vmlinux.lds.h>
13
14 #undef mips
15 #define mips mips
16 OUTPUT_ARCH(mips)
17 ENTRY(kernel_entry)
18 PHDRS {
19         text PT_LOAD FLAGS(7);  /* RWX */
20         note PT_NOTE FLAGS(4);  /* R__ */
21 }
22
23 #ifdef CONFIG_32BIT
24         #ifdef CONFIG_CPU_LITTLE_ENDIAN
25                 jiffies  = jiffies_64;
26         #else
27                 jiffies  = jiffies_64 + 4;
28         #endif
29 #else
30         jiffies  = jiffies_64;
31 #endif
32
33 SECTIONS
34 {
35 #ifdef CONFIG_BOOT_ELF64
36         /* Read-only sections, merged into text segment: */
37         /* . = 0xc000000000000000; */
38
39         /* This is the value for an Origin kernel, taken from an IRIX kernel.  */
40         /* . = 0xc00000000001c000; */
41
42         /* Set the vaddr for the text segment to a value
43          *   >= 0xa800 0000 0001 9000 if no symmon is going to configured
44          *   >= 0xa800 0000 0030 0000 otherwise
45          */
46
47         /* . = 0xa800000000300000; */
48         . = 0xffffffff80300000;
49 #endif
50         . = VMLINUX_LOAD_ADDRESS;
51         /* read-only */
52         _text = .;      /* Text and read-only data */
53         .text : {
54                 TEXT_TEXT
55                 SCHED_TEXT
56                 LOCK_TEXT
57                 KPROBES_TEXT
58                 IRQENTRY_TEXT
59                 *(.text.*)
60                 *(.fixup)
61                 *(.gnu.warning)
62         } :text = 0
63         _etext = .;     /* End of text section */
64
65         EXCEPTION_TABLE(16)
66
67         /* Exception table for data bus errors */
68         __dbe_table : {
69                 __start___dbe_table = .;
70                 *(__dbe_table)
71                 __stop___dbe_table = .;
72         }
73
74         NOTES :text :note
75         .dummy : { *(.dummy) } :text
76
77         _sdata = .;                     /* Start of data section */
78         RODATA
79
80         /* writeable */
81         .data : {       /* Data */
82                 . = . + DATAOFFSET;             /* for CONFIG_MAPPED_KERNEL */
83
84                 INIT_TASK_DATA(THREAD_SIZE)
85                 NOSAVE_DATA
86                 CACHELINE_ALIGNED_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
87                 READ_MOSTLY_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
88                 DATA_DATA
89                 CONSTRUCTORS
90         }
91         _gp = . + 0x8000;
92         .lit8 : {
93                 *(.lit8)
94         }
95         .lit4 : {
96                 *(.lit4)
97         }
98         /* We want the small data sections together, so single-instruction offsets
99            can access them all, and initialized data all before uninitialized, so
100            we can shorten the on-disk segment size.  */
101         .sdata : {
102                 *(.sdata)
103         }
104         _edata =  .;                    /* End of data section */
105
106         /* will be freed after init */
107         . = ALIGN(PAGE_SIZE);           /* Init code and data */
108         __init_begin = .;
109         INIT_TEXT_SECTION(PAGE_SIZE)
110         INIT_DATA_SECTION(16)
111
112         . = ALIGN(4);
113         .mips.machines.init : AT(ADDR(.mips.machines.init) - LOAD_OFFSET) {
114                 __mips_machines_start = .;
115                 *(.mips.machines.init)
116                 __mips_machines_end = .;
117         }
118
119         /* .exit.text is discarded at runtime, not link time, to deal with
120          * references from .rodata
121          */
122         .exit.text : {
123                 EXIT_TEXT
124         }
125         .exit.data : {
126                 EXIT_DATA
127         }
128
129         PERCPU_SECTION(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
130         /*
131          * Align to 64K in attempt to eliminate holes before the
132          * .bss..swapper_pg_dir section at the start of .bss.  This
133          * also satisfies PAGE_SIZE alignment as the largest page size
134          * allowed is 64K.
135          */
136         . = ALIGN(0x10000);
137         __init_end = .;
138         /* freed after init ends here */
139
140         /*
141          * Force .bss to 64K alignment so that .bss..swapper_pg_dir
142          * gets that alignment.  .sbss should be empty, so there will be
143          * no holes after __init_end. */
144         BSS_SECTION(0, 0x10000, 0)
145
146         _end = . ;
147
148         /* These mark the ABI of the kernel for debuggers.  */
149         .mdebug.abi32 : {
150                 KEEP(*(.mdebug.abi32))
151         }
152         .mdebug.abi64 : {
153                 KEEP(*(.mdebug.abi64))
154         }
155
156         /* This is the MIPS specific mdebug section.  */
157         .mdebug : {
158                 *(.mdebug)
159         }
160
161         STABS_DEBUG
162         DWARF_DEBUG
163
164         /* These must appear regardless of  .  */
165         .gptab.sdata : {
166                 *(.gptab.data)
167                 *(.gptab.sdata)
168         }
169         .gptab.sbss : {
170                 *(.gptab.bss)
171                 *(.gptab.sbss)
172         }
173
174         /* Sections to be discarded */
175         DISCARDS
176         /DISCARD/ : {
177                 /* ABI crap starts here */
178                 *(.MIPS.options)
179                 *(.options)
180                 *(.pdr)
181                 *(.reginfo)
182                 *(.eh_frame)
183         }
184 }