Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / arch / mips / include / asm / octeon / cvmx-fpa.h
1 /***********************license start***************
2  * Author: Cavium Networks
3  *
4  * Contact: support@caviumnetworks.com
5  * This file is part of the OCTEON SDK
6  *
7  * Copyright (c) 2003-2008 Cavium Networks
8  *
9  * This file is free software; you can redistribute it and/or modify
10  * it under the terms of the GNU General Public License, Version 2, as
11  * published by the Free Software Foundation.
12  *
13  * This file is distributed in the hope that it will be useful, but
14  * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
15  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
16  * NONINFRINGEMENT.  See the GNU General Public License for more
17  * details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this file; if not, write to the Free Software
21  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
22  * or visit http://www.gnu.org/licenses/.
23  *
24  * This file may also be available under a different license from Cavium.
25  * Contact Cavium Networks for more information
26  ***********************license end**************************************/
27
28 /**
29  * @file
30  *
31  * Interface to the hardware Free Pool Allocator.
32  *
33  *
34  */
35
36 #ifndef __CVMX_FPA_H__
37 #define __CVMX_FPA_H__
38
39 #include <asm/octeon/cvmx-address.h>
40 #include <asm/octeon/cvmx-fpa-defs.h>
41
42 #define CVMX_FPA_NUM_POOLS      8
43 #define CVMX_FPA_MIN_BLOCK_SIZE 128
44 #define CVMX_FPA_ALIGNMENT      128
45
46 /**
47  * Structure describing the data format used for stores to the FPA.
48  */
49 typedef union {
50         uint64_t u64;
51         struct {
52 #ifdef __BIG_ENDIAN_BITFIELD
53                 /*
54                  * the (64-bit word) location in scratchpad to write
55                  * to (if len != 0)
56                  */
57                 uint64_t scraddr:8;
58                 /* the number of words in the response (0 => no response) */
59                 uint64_t len:8;
60                 /* the ID of the device on the non-coherent bus */
61                 uint64_t did:8;
62                 /*
63                  * the address that will appear in the first tick on
64                  * the NCB bus.
65                  */
66                 uint64_t addr:40;
67 #else
68                 uint64_t addr:40;
69                 uint64_t did:8;
70                 uint64_t len:8;
71                 uint64_t scraddr:8;
72 #endif
73         } s;
74 } cvmx_fpa_iobdma_data_t;
75
76 /**
77  * Structure describing the current state of a FPA pool.
78  */
79 typedef struct {
80         /* Name it was created under */
81         const char *name;
82         /* Size of each block */
83         uint64_t size;
84         /* The base memory address of whole block */
85         void *base;
86         /* The number of elements in the pool at creation */
87         uint64_t starting_element_count;
88 } cvmx_fpa_pool_info_t;
89
90 /**
91  * Current state of all the pools. Use access functions
92  * instead of using it directly.
93  */
94 extern cvmx_fpa_pool_info_t cvmx_fpa_pool_info[CVMX_FPA_NUM_POOLS];
95
96 /* CSR typedefs have been moved to cvmx-csr-*.h */
97
98 /**
99  * Return the name of the pool
100  *
101  * @pool:   Pool to get the name of
102  * Returns The name
103  */
104 static inline const char *cvmx_fpa_get_name(uint64_t pool)
105 {
106         return cvmx_fpa_pool_info[pool].name;
107 }
108
109 /**
110  * Return the base of the pool
111  *
112  * @pool:   Pool to get the base of
113  * Returns The base
114  */
115 static inline void *cvmx_fpa_get_base(uint64_t pool)
116 {
117         return cvmx_fpa_pool_info[pool].base;
118 }
119
120 /**
121  * Check if a pointer belongs to an FPA pool. Return non-zero
122  * if the supplied pointer is inside the memory controlled by
123  * an FPA pool.
124  *
125  * @pool:   Pool to check
126  * @ptr:    Pointer to check
127  * Returns Non-zero if pointer is in the pool. Zero if not
128  */
129 static inline int cvmx_fpa_is_member(uint64_t pool, void *ptr)
130 {
131         return ((ptr >= cvmx_fpa_pool_info[pool].base) &&
132                 ((char *)ptr <
133                  ((char *)(cvmx_fpa_pool_info[pool].base)) +
134                  cvmx_fpa_pool_info[pool].size *
135                  cvmx_fpa_pool_info[pool].starting_element_count));
136 }
137
138 /**
139  * Enable the FPA for use. Must be performed after any CSR
140  * configuration but before any other FPA functions.
141  */
142 static inline void cvmx_fpa_enable(void)
143 {
144         union cvmx_fpa_ctl_status status;
145
146         status.u64 = cvmx_read_csr(CVMX_FPA_CTL_STATUS);
147         if (status.s.enb) {
148                 cvmx_dprintf
149                     ("Warning: Enabling FPA when FPA already enabled.\n");
150         }
151
152         /*
153          * Do runtime check as we allow pass1 compiled code to run on
154          * pass2 chips.
155          */
156         if (cvmx_octeon_is_pass1()) {
157                 union cvmx_fpa_fpfx_marks marks;
158                 int i;
159                 for (i = 1; i < 8; i++) {
160                         marks.u64 =
161                             cvmx_read_csr(CVMX_FPA_FPF1_MARKS + (i - 1) * 8ull);
162                         marks.s.fpf_wr = 0xe0;
163                         cvmx_write_csr(CVMX_FPA_FPF1_MARKS + (i - 1) * 8ull,
164                                        marks.u64);
165                 }
166
167                 /* Enforce a 10 cycle delay between config and enable */
168                 cvmx_wait(10);
169         }
170
171         /* FIXME: CVMX_FPA_CTL_STATUS read is unmodelled */
172         status.u64 = 0;
173         status.s.enb = 1;
174         cvmx_write_csr(CVMX_FPA_CTL_STATUS, status.u64);
175 }
176
177 /**
178  * Get a new block from the FPA
179  *
180  * @pool:   Pool to get the block from
181  * Returns Pointer to the block or NULL on failure
182  */
183 static inline void *cvmx_fpa_alloc(uint64_t pool)
184 {
185         uint64_t address =
186             cvmx_read_csr(CVMX_ADDR_DID(CVMX_FULL_DID(CVMX_OCT_DID_FPA, pool)));
187         if (address)
188                 return cvmx_phys_to_ptr(address);
189         else
190                 return NULL;
191 }
192
193 /**
194  * Asynchronously get a new block from the FPA
195  *
196  * @scr_addr: Local scratch address to put response in.  This is a byte address,
197  *                  but must be 8 byte aligned.
198  * @pool:      Pool to get the block from
199  */
200 static inline void cvmx_fpa_async_alloc(uint64_t scr_addr, uint64_t pool)
201 {
202         cvmx_fpa_iobdma_data_t data;
203
204         /*
205          * Hardware only uses 64 bit aligned locations, so convert
206          * from byte address to 64-bit index
207          */
208         data.s.scraddr = scr_addr >> 3;
209         data.s.len = 1;
210         data.s.did = CVMX_FULL_DID(CVMX_OCT_DID_FPA, pool);
211         data.s.addr = 0;
212         cvmx_send_single(data.u64);
213 }
214
215 /**
216  * Free a block allocated with a FPA pool.  Does NOT provide memory
217  * ordering in cases where the memory block was modified by the core.
218  *
219  * @ptr:    Block to free
220  * @pool:   Pool to put it in
221  * @num_cache_lines:
222  *               Cache lines to invalidate
223  */
224 static inline void cvmx_fpa_free_nosync(void *ptr, uint64_t pool,
225                                         uint64_t num_cache_lines)
226 {
227         cvmx_addr_t newptr;
228         newptr.u64 = cvmx_ptr_to_phys(ptr);
229         newptr.sfilldidspace.didspace =
230             CVMX_ADDR_DIDSPACE(CVMX_FULL_DID(CVMX_OCT_DID_FPA, pool));
231         /* Prevent GCC from reordering around free */
232         barrier();
233         /* value written is number of cache lines not written back */
234         cvmx_write_io(newptr.u64, num_cache_lines);
235 }
236
237 /**
238  * Free a block allocated with a FPA pool.  Provides required memory
239  * ordering in cases where memory block was modified by core.
240  *
241  * @ptr:    Block to free
242  * @pool:   Pool to put it in
243  * @num_cache_lines:
244  *               Cache lines to invalidate
245  */
246 static inline void cvmx_fpa_free(void *ptr, uint64_t pool,
247                                  uint64_t num_cache_lines)
248 {
249         cvmx_addr_t newptr;
250         newptr.u64 = cvmx_ptr_to_phys(ptr);
251         newptr.sfilldidspace.didspace =
252             CVMX_ADDR_DIDSPACE(CVMX_FULL_DID(CVMX_OCT_DID_FPA, pool));
253         /*
254          * Make sure that any previous writes to memory go out before
255          * we free this buffer.  This also serves as a barrier to
256          * prevent GCC from reordering operations to after the
257          * free.
258          */
259         CVMX_SYNCWS;
260         /* value written is number of cache lines not written back */
261         cvmx_write_io(newptr.u64, num_cache_lines);
262 }
263
264 /**
265  * Setup a FPA pool to control a new block of memory.
266  * This can only be called once per pool. Make sure proper
267  * locking enforces this.
268  *
269  * @pool:       Pool to initialize
270  *                   0 <= pool < 8
271  * @name:       Constant character string to name this pool.
272  *                   String is not copied.
273  * @buffer:     Pointer to the block of memory to use. This must be
274  *                   accessible by all processors and external hardware.
275  * @block_size: Size for each block controlled by the FPA
276  * @num_blocks: Number of blocks
277  *
278  * Returns 0 on Success,
279  *         -1 on failure
280  */
281 extern int cvmx_fpa_setup_pool(uint64_t pool, const char *name, void *buffer,
282                                uint64_t block_size, uint64_t num_blocks);
283
284 /**
285  * Shutdown a Memory pool and validate that it had all of
286  * the buffers originally placed in it. This should only be
287  * called by one processor after all hardware has finished
288  * using the pool.
289  *
290  * @pool:   Pool to shutdown
291  * Returns Zero on success
292  *         - Positive is count of missing buffers
293  *         - Negative is too many buffers or corrupted pointers
294  */
295 extern uint64_t cvmx_fpa_shutdown_pool(uint64_t pool);
296
297 /**
298  * Get the size of blocks controlled by the pool
299  * This is resolved to a constant at compile time.
300  *
301  * @pool:   Pool to access
302  * Returns Size of the block in bytes
303  */
304 uint64_t cvmx_fpa_get_block_size(uint64_t pool);
305
306 #endif /*  __CVM_FPA_H__ */