kernel/arch/mips/boot/dts/brcm/bcm7362.dtsi

   1 / {
   2         #address-cells = <1>;
   3         #size-cells = <1>;
   4         compatible = "brcm,bcm7362";
   5
   6         cpus {
   7                 #address-cells = <1>;
   8                 #size-cells = <0>;
   9
  10                 mips-hpt-frequency = <375000000>;
  11
  12                 cpu@0 {
  13                         compatible = "brcm,bmips4380";
  14                         device_type = "cpu";
  15                         reg = <0>;
  16                 };
  17
  18                 cpu@1 {
  19                         compatible = "brcm,bmips4380";
  20                         device_type = "cpu";
  21                         reg = <1>;
  22                 };
  23         };
  24
  25         aliases {
  26                 uart0 = &uart0;
  27                 uart1 = &uart1;
  28                 uart2 = &uart2;
  29         };
  30
  31         cpu_intc: cpu_intc {
  32                 #address-cells = <0>;
  33                 compatible = "mti,cpu-interrupt-controller";
  34
  35                 interrupt-controller;
  36                 #interrupt-cells = <1>;
  37         };
  38
  39         clocks {
  40                 uart_clk: uart_clk {
  41                         compatible = "fixed-clock";
  42                         #clock-cells = <0>;
  43                         clock-frequency = <81000000>;
  44                 };
  45         };
  46
  47         rdb {
  48                 #address-cells = <1>;
  49                 #size-cells = <1>;
  50
  51                 compatible = "simple-bus";
  52                 ranges = <0 0x10000000 0x01000000>;
  53
  54                 periph_intc: periph_intc@411400 {
  55                         compatible = "brcm,bcm7038-l1-intc";
  56                         reg = <0x411400 0x30>, <0x411600 0x30>;
  57
  58                         interrupt-controller;
  59                         #interrupt-cells = <1>;
  60
  61                         interrupt-parent = <&cpu_intc>;
  62                         interrupts = <2>, <3>;
  63                 };
  64
  65                 sun_l2_intc: sun_l2_intc@403000 {
  66                         compatible = "brcm,l2-intc";
  67                         reg = <0x403000 0x30>;
  68                         interrupt-controller;
  69                         #interrupt-cells = <1>;
  70                         interrupt-parent = <&periph_intc>;
  71                         interrupts = <48>;
  72                 };
  73
  74                 gisb-arb@400000 {
  75                         compatible = "brcm,bcm7400-gisb-arb";
  76                         reg = <0x400000 0xdc>;
  77                         native-endian;
  78                         interrupt-parent = <&sun_l2_intc>;
  79                         interrupts = <0>, <2>;
  80                         brcm,gisb-arb-master-mask = <0x2f3>;
  81                         brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0",
  82                                                      "rdc_0", "raaga_0",
  83                                                      "avd_0", "jtag_0";
  84                 };
  85
  86                 upg_irq0_intc: upg_irq0_intc@406600 {
  87                         compatible = "brcm,bcm7120-l2-intc";
  88                         reg = <0x406600 0x8>;
  89
  90                         brcm,int-map-mask = <0x44>, <0x7000000>;
  91                         brcm,int-fwd-mask = <0x70000>;
  92
  93                         interrupt-controller;
  94                         #interrupt-cells = <1>;
  95
  96                         interrupt-parent = <&periph_intc>;
  97                         interrupts = <56>, <54>;
  98                         interrupt-names = "upg_main", "upg_bsc";
  99                 };
 100
 101                 upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
 102                         compatible = "brcm,bcm7120-l2-intc";
 103                         reg = <0x408b80 0x8>;
 104
 105                         brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>;
 106                         brcm,int-fwd-mask = <0>;
 107                         brcm,irq-can-wake;
 108
 109                         interrupt-controller;
 110                         #interrupt-cells = <1>;
 111
 112                         interrupt-parent = <&periph_intc>;
 113                         interrupts = <57>, <55>, <59>;
 114                         interrupt-names = "upg_main_aon", "upg_bsc_aon",
 115                                           "upg_spi";
 116                 };
 117
 118                 sun_top_ctrl: syscon@404000 {
 119                         compatible = "brcm,bcm7362-sun-top-ctrl", "syscon";
 120                         reg = <0x404000 0x51c>;
 121                         little-endian;
 122                 };
 123
 124                 reboot {
 125                         compatible = "brcm,brcmstb-reboot";
 126                         syscon = <&sun_top_ctrl 0x304 0x308>;
 127                 };
 128
 129                 uart0: serial@406800 {
 130                         compatible = "ns16550a";
 131                         reg = <0x406800 0x20>;
 132                         reg-io-width = <0x4>;
 133                         reg-shift = <0x2>;
 134                         native-endian;
 135                         interrupt-parent = <&periph_intc>;
 136                         interrupts = <61>;
 137                         clocks = <&uart_clk>;
 138                         status = "disabled";
 139                 };
 140
 141                 uart1: serial@406840 {
 142                         compatible = "ns16550a";
 143                         reg = <0x406840 0x20>;
 144                         reg-io-width = <0x4>;
 145                         reg-shift = <0x2>;
 146                         native-endian;
 147                         interrupt-parent = <&periph_intc>;
 148                         interrupts = <62>;
 149                         clocks = <&uart_clk>;
 150                         status = "disabled";
 151                 };
 152
 153                 uart2: serial@406880 {
 154                         compatible = "ns16550a";
 155                         reg = <0x406880 0x20>;
 156                         reg-io-width = <0x4>;
 157                         reg-shift = <0x2>;
 158                         native-endian;
 159                         interrupt-parent = <&periph_intc>;
 160                         interrupts = <63>;
 161                         clocks = <&uart_clk>;
 162                         status = "disabled";
 163                 };
 164
 165                 bsca: i2c@406200 {
 166                       clock-frequency = <390000>;
 167                       compatible = "brcm,brcmstb-i2c";
 168                       interrupt-parent = <&upg_irq0_intc>;
 169                       reg = <0x406200 0x58>;
 170                       interrupts = <24>;
 171                       interrupt-names = "upg_bsca";
 172                       status = "disabled";
 173                 };
 174
 175                 bscb: i2c@406280 {
 176                       clock-frequency = <390000>;
 177                       compatible = "brcm,brcmstb-i2c";
 178                       interrupt-parent = <&upg_irq0_intc>;
 179                       reg = <0x406280 0x58>;
 180                       interrupts = <25>;
 181                       interrupt-names = "upg_bscb";
 182                       status = "disabled";
 183                 };
 184
 185                 bscd: i2c@408980 {
 186                       clock-frequency = <390000>;
 187                       compatible = "brcm,brcmstb-i2c";
 188                       interrupt-parent = <&upg_aon_irq0_intc>;
 189                       reg = <0x408980 0x58>;
 190                       interrupts = <27>;
 191                       interrupt-names = "upg_bscd";
 192                       status = "disabled";
 193                 };
 194
 195                 enet0: ethernet@430000 {
 196                         phy-mode = "internal";
 197                         phy-handle = <&phy1>;
 198                         mac-address = [ 00 10 18 36 23 1a ];
 199                         compatible = "brcm,genet-v2";
 200                         #address-cells = <0x1>;
 201                         #size-cells = <0x1>;
 202                         reg = <0x430000 0x4c8c>;
 203                         interrupts = <24>, <25>;
 204                         interrupt-parent = <&periph_intc>;
 205                         status = "disabled";
 206
 207                         mdio@e14 {
 208                                 compatible = "brcm,genet-mdio-v2";
 209                                 #address-cells = <0x1>;
 210                                 #size-cells = <0x0>;
 211                                 reg = <0xe14 0x8>;
 212
 213                                 phy1: ethernet-phy@1 {
 214                                         max-speed = <100>;
 215                                         reg = <0x1>;
 216                                         compatible = "brcm,40nm-ephy",
 217                                                 "ethernet-phy-ieee802.3-c22";
 218                                 };
 219                         };
 220                 };
 221
 222                 ehci0: usb@480300 {
 223                         compatible = "brcm,bcm7362-ehci", "generic-ehci";
 224                         reg = <0x480300 0x100>;
 225                         native-endian;
 226                         interrupt-parent = <&periph_intc>;
 227                         interrupts = <65>;
 228                         status = "disabled";
 229                 };
 230
 231                 ohci0: usb@480400 {
 232                         compatible = "brcm,bcm7362-ohci", "generic-ohci";
 233                         reg = <0x480400 0x100>;
 234                         native-endian;
 235                         no-big-frame-no;
 236                         interrupt-parent = <&periph_intc>;
 237                         interrupts = <66>;
 238                         status = "disabled";
 239                 };
 240
 241                 sata: sata@181000 {
 242                         compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
 243                         reg-names = "ahci", "top-ctrl";
 244                         reg = <0x181000 0xa9c>, <0x180020 0x1c>;
 245                         interrupt-parent = <&periph_intc>;
 246                         interrupts = <86>;
 247                         #address-cells = <1>;
 248                         #size-cells = <0>;
 249                         brcm,broken-ncq;
 250                         brcm,broken-phy;
 251                         status = "disabled";
 252
 253                         sata0: sata-port@0 {
 254                                 reg = <0>;
 255                                 phys = <&sata_phy0>;
 256                         };
 257
 258                         sata1: sata-port@1 {
 259                                 reg = <1>;
 260                                 phys = <&sata_phy1>;
 261                         };
 262                 };
 263
 264                 sata_phy: sata-phy@1800000 {
 265                         compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
 266                         reg = <0x180100 0x0eff>;
 267                         reg-names = "phy";
 268                         #address-cells = <1>;
 269                         #size-cells = <0>;
 270                         status = "disabled";
 271
 272                         sata_phy0: sata-phy@0 {
 273                                 reg = <0>;
 274                                 #phy-cells = <0>;
 275                         };
 276
 277                         sata_phy1: sata-phy@1 {
 278                                 reg = <1>;
 279                                 #phy-cells = <0>;
 280                         };
 281                 };
 282         };
 283 };