kernel/arch/mips/boot/dts/brcm/bcm7358.dtsi

   1 / {
   2         #address-cells = <1>;
   3         #size-cells = <1>;
   4         compatible = "brcm,bcm7358";
   5
   6         cpus {
   7                 #address-cells = <1>;
   8                 #size-cells = <0>;
   9
  10                 mips-hpt-frequency = <375000000>;
  11
  12                 cpu@0 {
  13                         compatible = "brcm,bmips3300";
  14                         device_type = "cpu";
  15                         reg = <0>;
  16                 };
  17         };
  18
  19         aliases {
  20                 uart0 = &uart0;
  21         };
  22
  23         cpu_intc: cpu_intc {
  24                 #address-cells = <0>;
  25                 compatible = "mti,cpu-interrupt-controller";
  26
  27                 interrupt-controller;
  28                 #interrupt-cells = <1>;
  29         };
  30
  31         clocks {
  32                 uart_clk: uart_clk {
  33                         compatible = "fixed-clock";
  34                         #clock-cells = <0>;
  35                         clock-frequency = <81000000>;
  36                 };
  37         };
  38
  39         rdb {
  40                 #address-cells = <1>;
  41                 #size-cells = <1>;
  42
  43                 compatible = "simple-bus";
  44                 ranges = <0 0x10000000 0x01000000>;
  45
  46                 periph_intc: periph_intc@411400 {
  47                         compatible = "brcm,bcm7038-l1-intc";
  48                         reg = <0x411400 0x30>;
  49
  50                         interrupt-controller;
  51                         #interrupt-cells = <1>;
  52
  53                         interrupt-parent = <&cpu_intc>;
  54                         interrupts = <2>;
  55                 };
  56
  57                 sun_l2_intc: sun_l2_intc@403000 {
  58                         compatible = "brcm,l2-intc";
  59                         reg = <0x403000 0x30>;
  60                         interrupt-controller;
  61                         #interrupt-cells = <1>;
  62                         interrupt-parent = <&periph_intc>;
  63                         interrupts = <48>;
  64                 };
  65
  66                 gisb-arb@400000 {
  67                         compatible = "brcm,bcm7400-gisb-arb";
  68                         reg = <0x400000 0xdc>;
  69                         native-endian;
  70                         interrupt-parent = <&sun_l2_intc>;
  71                         interrupts = <0>, <2>;
  72                         brcm,gisb-arb-master-mask = <0x2f3>;
  73                         brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0",
  74                                                      "rdc_0", "raaga_0",
  75                                                      "avd_0", "jtag_0";
  76                 };
  77
  78                 upg_irq0_intc: upg_irq0_intc@406600 {
  79                         compatible = "brcm,bcm7120-l2-intc";
  80                         reg = <0x406600 0x8>;
  81
  82                         brcm,int-map-mask = <0x44>;
  83                         brcm,int-fwd-mask = <0x70000>;
  84
  85                         interrupt-controller;
  86                         #interrupt-cells = <1>;
  87
  88                         interrupt-parent = <&periph_intc>;
  89                         interrupts = <56>;
  90                 };
  91
  92                 sun_top_ctrl: syscon@404000 {
  93                         compatible = "brcm,bcm7358-sun-top-ctrl", "syscon";
  94                         reg = <0x404000 0x51c>;
  95                         little-endian;
  96                 };
  97
  98                 reboot {
  99                         compatible = "brcm,brcmstb-reboot";
 100                         syscon = <&sun_top_ctrl 0x304 0x308>;
 101                 };
 102
 103                 uart0: serial@406800 {
 104                         compatible = "ns16550a";
 105                         reg = <0x406800 0x20>;
 106                         reg-io-width = <0x4>;
 107                         reg-shift = <0x2>;
 108                         native-endian;
 109                         interrupt-parent = <&periph_intc>;
 110                         interrupts = <61>;
 111                         clocks = <&uart_clk>;
 112                         status = "disabled";
 113                 };
 114
 115                 enet0: ethernet@430000 {
 116                         phy-mode = "internal";
 117                         phy-handle = <&phy1>;
 118                         mac-address = [ 00 10 18 36 23 1a ];
 119                         compatible = "brcm,genet-v2";
 120                         #address-cells = <0x1>;
 121                         #size-cells = <0x1>;
 122                         reg = <0x430000 0x4c8c>;
 123                         interrupts = <24>, <25>;
 124                         interrupt-parent = <&periph_intc>;
 125                         status = "disabled";
 126
 127                         mdio@e14 {
 128                                 compatible = "brcm,genet-mdio-v2";
 129                                 #address-cells = <0x1>;
 130                                 #size-cells = <0x0>;
 131                                 reg = <0xe14 0x8>;
 132
 133                                 phy1: ethernet-phy@1 {
 134                                         max-speed = <100>;
 135                                         reg = <0x1>;
 136                                         compatible = "brcm,40nm-ephy",
 137                                                 "ethernet-phy-ieee802.3-c22";
 138                                 };
 139                         };
 140                 };
 141
 142                 ehci0: usb@480300 {
 143                         compatible = "brcm,bcm7358-ehci", "generic-ehci";
 144                         reg = <0x480300 0x100>;
 145                         native-endian;
 146                         interrupt-parent = <&periph_intc>;
 147                         interrupts = <65>;
 148                         status = "disabled";
 149                 };
 150
 151                 ohci0: usb@480400 {
 152                         compatible = "brcm,bcm7358-ohci", "generic-ohci";
 153                         reg = <0x480400 0x100>;
 154                         native-endian;
 155                         no-big-frame-no;
 156                         interrupt-parent = <&periph_intc>;
 157                         interrupts = <66>;
 158                         status = "disabled";
 159                 };
 160         };
 161 };