Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / arch / mips / ath79 / mach-ubnt-xm.c
1 /*
2  *  Ubiquiti Networks XM (rev 1.0) board support
3  *
4  *  Copyright (C) 2011 RenĂ© Bolldorf <xsecute@googlemail.com>
5  *
6  *  Derived from: mach-pb44.c
7  *
8  *  This program is free software; you can redistribute it and/or modify it
9  *  under the terms of the GNU General Public License version 2 as published
10  *  by the Free Software Foundation.
11  */
12
13 #include <linux/init.h>
14 #include <linux/pci.h>
15 #include <linux/ath9k_platform.h>
16
17 #include <asm/mach-ath79/irq.h>
18
19 #include "machtypes.h"
20 #include "dev-gpio-buttons.h"
21 #include "dev-leds-gpio.h"
22 #include "dev-spi.h"
23 #include "pci.h"
24
25 #define UBNT_XM_GPIO_LED_L1             0
26 #define UBNT_XM_GPIO_LED_L2             1
27 #define UBNT_XM_GPIO_LED_L3             11
28 #define UBNT_XM_GPIO_LED_L4             7
29
30 #define UBNT_XM_GPIO_BTN_RESET          12
31
32 #define UBNT_XM_KEYS_POLL_INTERVAL      20
33 #define UBNT_XM_KEYS_DEBOUNCE_INTERVAL  (3 * UBNT_XM_KEYS_POLL_INTERVAL)
34
35 #define UBNT_XM_EEPROM_ADDR             (u8 *) KSEG1ADDR(0x1fff1000)
36
37 static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
38         {
39                 .name           = "ubnt-xm:red:link1",
40                 .gpio           = UBNT_XM_GPIO_LED_L1,
41                 .active_low     = 0,
42         }, {
43                 .name           = "ubnt-xm:orange:link2",
44                 .gpio           = UBNT_XM_GPIO_LED_L2,
45                 .active_low     = 0,
46         }, {
47                 .name           = "ubnt-xm:green:link3",
48                 .gpio           = UBNT_XM_GPIO_LED_L3,
49                 .active_low     = 0,
50         }, {
51                 .name           = "ubnt-xm:green:link4",
52                 .gpio           = UBNT_XM_GPIO_LED_L4,
53                 .active_low     = 0,
54         },
55 };
56
57 static struct gpio_keys_button ubnt_xm_gpio_keys[] __initdata = {
58         {
59                 .desc                   = "reset",
60                 .type                   = EV_KEY,
61                 .code                   = KEY_RESTART,
62                 .debounce_interval      = UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
63                 .gpio                   = UBNT_XM_GPIO_BTN_RESET,
64                 .active_low             = 1,
65         }
66 };
67
68 static struct spi_board_info ubnt_xm_spi_info[] = {
69         {
70                 .bus_num        = 0,
71                 .chip_select    = 0,
72                 .max_speed_hz   = 25000000,
73                 .modalias       = "mx25l6405d",
74         }
75 };
76
77 static struct ath79_spi_platform_data ubnt_xm_spi_data = {
78         .bus_num                = 0,
79         .num_chipselect         = 1,
80 };
81
82 #ifdef CONFIG_PCI
83 static struct ath9k_platform_data ubnt_xm_eeprom_data;
84
85 static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev)
86 {
87         switch (PCI_SLOT(dev->devfn)) {
88         case 0:
89                 dev->dev.platform_data = &ubnt_xm_eeprom_data;
90                 break;
91         }
92
93         return 0;
94 }
95
96 static void __init ubnt_xm_pci_init(void)
97 {
98         memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
99                sizeof(ubnt_xm_eeprom_data.eeprom_data));
100
101         ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init);
102         ath79_register_pci();
103 }
104 #else
105 static inline void ubnt_xm_pci_init(void) {}
106 #endif /* CONFIG_PCI */
107
108 static void __init ubnt_xm_init(void)
109 {
110         ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
111                                  ubnt_xm_leds_gpio);
112
113         ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
114                                         ARRAY_SIZE(ubnt_xm_gpio_keys),
115                                         ubnt_xm_gpio_keys);
116
117         ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info,
118                            ARRAY_SIZE(ubnt_xm_spi_info));
119
120         ubnt_xm_pci_init();
121 }
122
123 MIPS_MACHINE(ATH79_MACH_UBNT_XM,
124              "UBNT-XM",
125              "Ubiquiti Networks XM (rev 1.0) board",
126              ubnt_xm_init);