kernel/arch/ia64/hp/sim/simserial.c

   1 /*
   2  * Simulated Serial Driver (fake serial)
   3  *
   4  * This driver is mostly used for bringup purposes and will go away.
   5  * It has a strong dependency on the system console. All outputs
   6  * are rerouted to the same facility as the one used by printk which, in our
   7  * case means sys_sim.c console (goes via the simulator).
   8  *
   9  * Copyright (C) 1999-2000, 2002-2003 Hewlett-Packard Co
  10  *      Stephane Eranian <eranian@hpl.hp.com>
  11  *      David Mosberger-Tang <davidm@hpl.hp.com>
  12  */
  13
  14 #include <linux/init.h>
  15 #include <linux/errno.h>
  16 #include <linux/sched.h>
  17 #include <linux/tty.h>
  18 #include <linux/tty_flip.h>
  19 #include <linux/major.h>
  20 #include <linux/fcntl.h>
  21 #include <linux/mm.h>
  22 #include <linux/seq_file.h>
  23 #include <linux/slab.h>
  24 #include <linux/capability.h>
  25 #include <linux/circ_buf.h>
  26 #include <linux/console.h>
  27 #include <linux/irq.h>
  28 #include <linux/module.h>
  29 #include <linux/serial.h>
  30 #include <linux/sysrq.h>
  31 #include <linux/uaccess.h>
  32
  33 #include <asm/hpsim.h>
  34
  35 #include "hpsim_ssc.h"
  36
  37 #undef SIMSERIAL_DEBUG  /* define this to get some debug information */
  38
  39 #define KEYBOARD_INTR   3       /* must match with simulator! */
  40
  41 #define NR_PORTS        1       /* only one port for now */
  42
  43 struct serial_state {
  44         struct tty_port port;
  45         struct circ_buf xmit;
  46         int irq;
  47         int x_char;
  48 };
  49
  50 static struct serial_state rs_table[NR_PORTS];
  51
  52 struct tty_driver *hp_simserial_driver;
  53
  54 static struct console *console;
  55
  56 static void receive_chars(struct tty_port *port)
  57 {
  58         unsigned char ch;
  59         static unsigned char seen_esc = 0;
  60
  61         while ( (ch = ia64_ssc(0, 0, 0, 0, SSC_GETCHAR)) ) {
  62                 if (ch == 27 && seen_esc == 0) {
  63                         seen_esc = 1;
  64                         continue;
  65                 } else if (seen_esc == 1 && ch == 'O') {
  66                         seen_esc = 2;
  67                         continue;
  68                 } else if (seen_esc == 2) {
  69                         if (ch == 'P') /* F1 */
  70                                 show_state();
  71 #ifdef CONFIG_MAGIC_SYSRQ
  72                         if (ch == 'S') { /* F4 */
  73                                 do {
  74                                         ch = ia64_ssc(0, 0, 0, 0, SSC_GETCHAR);
  75                                 } while (!ch);
  76                                 handle_sysrq(ch);
  77                         }
  78 #endif
  79                         seen_esc = 0;
  80                         continue;
  81                 }
  82                 seen_esc = 0;
  83
  84                 if (tty_insert_flip_char(port, ch, TTY_NORMAL) == 0)
  85                         break;
  86         }
  87         tty_flip_buffer_push(port);
  88 }
  89
  90 /*
  91  * This is the serial driver's interrupt routine for a single port
  92  */
  93 static irqreturn_t rs_interrupt_single(int irq, void *dev_id)
  94 {
  95         struct serial_state *info = dev_id;
  96
  97         receive_chars(&info->port);
  98
  99         return IRQ_HANDLED;
 100 }
 101
 102 /*
 103  * -------------------------------------------------------------------
 104  * Here ends the serial interrupt routines.
 105  * -------------------------------------------------------------------
 106  */
 107
 108 static int rs_put_char(struct tty_struct *tty, unsigned char ch)
 109 {
 110         struct serial_state *info = tty->driver_data;
 111         unsigned long flags;
 112
 113         if (!info->xmit.buf)
 114                 return 0;
 115
 116         local_irq_save(flags);
 117         if (CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE) == 0) {
 118                 local_irq_restore(flags);
 119                 return 0;
 120         }
 121         info->xmit.buf[info->xmit.head] = ch;
 122         info->xmit.head = (info->xmit.head + 1) & (SERIAL_XMIT_SIZE-1);
 123         local_irq_restore(flags);
 124         return 1;
 125 }
 126
 127 static void transmit_chars(struct tty_struct *tty, struct serial_state *info,
 128                 int *intr_done)
 129 {
 130         int count;
 131         unsigned long flags;
 132
 133         local_irq_save(flags);
 134
 135         if (info->x_char) {
 136                 char c = info->x_char;
 137
 138                 console->write(console, &c, 1);
 139
 140                 info->x_char = 0;
 141
 142                 goto out;
 143         }
 144
 145         if (info->xmit.head == info->xmit.tail || tty->stopped) {
 146 #ifdef SIMSERIAL_DEBUG
 147                 printk("transmit_chars: head=%d, tail=%d, stopped=%d\n",
 148                        info->xmit.head, info->xmit.tail, tty->stopped);
 149 #endif
 150                 goto out;
 151         }
 152         /*
 153          * We removed the loop and try to do it in to chunks. We need
 154          * 2 operations maximum because it's a ring buffer.
 155          *
 156          * First from current to tail if possible.
 157          * Then from the beginning of the buffer until necessary
 158          */
 159
 160         count = min(CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE),
 161                     SERIAL_XMIT_SIZE - info->xmit.tail);
 162         console->write(console, info->xmit.buf+info->xmit.tail, count);
 163
 164         info->xmit.tail = (info->xmit.tail+count) & (SERIAL_XMIT_SIZE-1);
 165
 166         /*
 167          * We have more at the beginning of the buffer
 168          */
 169         count = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
 170         if (count) {
 171                 console->write(console, info->xmit.buf, count);
 172                 info->xmit.tail += count;
 173         }
 174 out:
 175         local_irq_restore(flags);
 176 }
 177
 178 static void rs_flush_chars(struct tty_struct *tty)
 179 {
 180         struct serial_state *info = tty->driver_data;
 181
 182         if (info->xmit.head == info->xmit.tail || tty->stopped ||
 183                         !info->xmit.buf)
 184                 return;
 185
 186         transmit_chars(tty, info, NULL);
 187 }
 188
 189 static int rs_write(struct tty_struct * tty,
 190                     const unsigned char *buf, int count)
 191 {
 192         struct serial_state *info = tty->driver_data;
 193         int     c, ret = 0;
 194         unsigned long flags;
 195
 196         if (!info->xmit.buf)
 197                 return 0;
 198
 199         local_irq_save(flags);
 200         while (1) {
 201                 c = CIRC_SPACE_TO_END(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
 202                 if (count < c)
 203                         c = count;
 204                 if (c <= 0) {
 205                         break;
 206                 }
 207                 memcpy(info->xmit.buf + info->xmit.head, buf, c);
 208                 info->xmit.head = ((info->xmit.head + c) &
 209                                    (SERIAL_XMIT_SIZE-1));
 210                 buf += c;
 211                 count -= c;
 212                 ret += c;
 213         }
 214         local_irq_restore(flags);
 215         /*
 216          * Hey, we transmit directly from here in our case
 217          */
 218         if (CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE) &&
 219                         !tty->stopped)
 220                 transmit_chars(tty, info, NULL);
 221
 222         return ret;
 223 }
 224
 225 static int rs_write_room(struct tty_struct *tty)
 226 {
 227         struct serial_state *info = tty->driver_data;
 228
 229         return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
 230 }
 231
 232 static int rs_chars_in_buffer(struct tty_struct *tty)
 233 {
 234         struct serial_state *info = tty->driver_data;
 235
 236         return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
 237 }
 238
 239 static void rs_flush_buffer(struct tty_struct *tty)
 240 {
 241         struct serial_state *info = tty->driver_data;
 242         unsigned long flags;
 243
 244         local_irq_save(flags);
 245         info->xmit.head = info->xmit.tail = 0;
 246         local_irq_restore(flags);
 247
 248         tty_wakeup(tty);
 249 }
 250
 251 /*
 252  * This function is used to send a high-priority XON/XOFF character to
 253  * the device
 254  */
 255 static void rs_send_xchar(struct tty_struct *tty, char ch)
 256 {
 257         struct serial_state *info = tty->driver_data;
 258
 259         info->x_char = ch;
 260         if (ch) {
 261                 /*
 262                  * I guess we could call console->write() directly but
 263                  * let's do that for now.
 264                  */
 265                 transmit_chars(tty, info, NULL);
 266         }
 267 }
 268
 269 /*
 270  * ------------------------------------------------------------
 271  * rs_throttle()
 272  *
 273  * This routine is called by the upper-layer tty layer to signal that
 274  * incoming characters should be throttled.
 275  * ------------------------------------------------------------
 276  */
 277 static void rs_throttle(struct tty_struct * tty)
 278 {
 279         if (I_IXOFF(tty))
 280                 rs_send_xchar(tty, STOP_CHAR(tty));
 281
 282         printk(KERN_INFO "simrs_throttle called\n");
 283 }
 284
 285 static void rs_unthrottle(struct tty_struct * tty)
 286 {
 287         struct serial_state *info = tty->driver_data;
 288
 289         if (I_IXOFF(tty)) {
 290                 if (info->x_char)
 291                         info->x_char = 0;
 292                 else
 293                         rs_send_xchar(tty, START_CHAR(tty));
 294         }
 295         printk(KERN_INFO "simrs_unthrottle called\n");
 296 }
 297
 298 static int rs_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg)
 299 {
 300         if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
 301             (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) &&
 302             (cmd != TIOCMIWAIT)) {
 303                 if (tty->flags & (1 << TTY_IO_ERROR))
 304                     return -EIO;
 305         }
 306
 307         switch (cmd) {
 308         case TIOCGSERIAL:
 309         case TIOCSSERIAL:
 310         case TIOCSERGSTRUCT:
 311         case TIOCMIWAIT:
 312                 return 0;
 313         case TIOCSERCONFIG:
 314         case TIOCSERGETLSR: /* Get line status register */
 315                 return -EINVAL;
 316         case TIOCSERGWILD:
 317         case TIOCSERSWILD:
 318                 /* "setserial -W" is called in Debian boot */
 319                 printk (KERN_INFO "TIOCSER?WILD ioctl obsolete, ignored.\n");
 320                 return 0;
 321         }
 322         return -ENOIOCTLCMD;
 323 }
 324
 325 #define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
 326
 327 /*
 328  * This routine will shutdown a serial port; interrupts are disabled, and
 329  * DTR is dropped if the hangup on close termio flag is on.
 330  */
 331 static void shutdown(struct tty_port *port)
 332 {
 333         struct serial_state *info = container_of(port, struct serial_state,
 334                         port);
 335         unsigned long flags;
 336
 337         local_irq_save(flags);
 338         if (info->irq)
 339                 free_irq(info->irq, info);
 340
 341         if (info->xmit.buf) {
 342                 free_page((unsigned long) info->xmit.buf);
 343                 info->xmit.buf = NULL;
 344         }
 345         local_irq_restore(flags);
 346 }
 347
 348 static void rs_close(struct tty_struct *tty, struct file * filp)
 349 {
 350         struct serial_state *info = tty->driver_data;
 351
 352         tty_port_close(&info->port, tty, filp);
 353 }
 354
 355 static void rs_hangup(struct tty_struct *tty)
 356 {
 357         struct serial_state *info = tty->driver_data;
 358
 359         rs_flush_buffer(tty);
 360         tty_port_hangup(&info->port);
 361 }
 362
 363 static int activate(struct tty_port *port, struct tty_struct *tty)
 364 {
 365         struct serial_state *state = container_of(port, struct serial_state,
 366                         port);
 367         unsigned long flags, page;
 368         int retval = 0;
 369
 370         page = get_zeroed_page(GFP_KERNEL);
 371         if (!page)
 372                 return -ENOMEM;
 373
 374         local_irq_save(flags);
 375
 376         if (state->xmit.buf)
 377                 free_page(page);
 378         else
 379                 state->xmit.buf = (unsigned char *) page;
 380
 381         if (state->irq) {
 382                 retval = request_irq(state->irq, rs_interrupt_single, 0,
 383                                 "simserial", state);
 384                 if (retval)
 385                         goto errout;
 386         }
 387
 388         state->xmit.head = state->xmit.tail = 0;
 389
 390         /*
 391          * Set up the tty->alt_speed kludge
 392          */
 393         if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
 394                 tty->alt_speed = 57600;
 395         if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
 396                 tty->alt_speed = 115200;
 397         if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
 398                 tty->alt_speed = 230400;
 399         if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
 400                 tty->alt_speed = 460800;
 401
 402 errout:
 403         local_irq_restore(flags);
 404         return retval;
 405 }
 406
 407
 408 /*
 409  * This routine is called whenever a serial port is opened.  It
 410  * enables interrupts for a serial port, linking in its async structure into
 411  * the IRQ chain.   It also performs the serial-specific
 412  * initialization for the tty structure.
 413  */
 414 static int rs_open(struct tty_struct *tty, struct file * filp)
 415 {
 416         struct serial_state *info = rs_table + tty->index;
 417         struct tty_port *port = &info->port;
 418
 419         tty->driver_data = info;
 420         port->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 421
 422         /*
 423          * figure out which console to use (should be one already)
 424          */
 425         console = console_drivers;
 426         while (console) {
 427                 if ((console->flags & CON_ENABLED) && console->write) break;
 428                 console = console->next;
 429         }
 430
 431         return tty_port_open(port, tty, filp);
 432 }
 433
 434 /*
 435  * /proc fs routines....
 436  */
 437
 438 static int rs_proc_show(struct seq_file *m, void *v)
 439 {
 440         int i;
 441
 442         seq_printf(m, "simserinfo:1.0\n");
 443         for (i = 0; i < NR_PORTS; i++)
 444                 seq_printf(m, "%d: uart:16550 port:3F8 irq:%d\n",
 445                        i, rs_table[i].irq);
 446         return 0;
 447 }
 448
 449 static int rs_proc_open(struct inode *inode, struct file *file)
 450 {
 451         return single_open(file, rs_proc_show, NULL);
 452 }
 453
 454 static const struct file_operations rs_proc_fops = {
 455         .owner          = THIS_MODULE,
 456         .open           = rs_proc_open,
 457         .read           = seq_read,
 458         .llseek         = seq_lseek,
 459         .release        = single_release,
 460 };
 461
 462 static const struct tty_operations hp_ops = {
 463         .open = rs_open,
 464         .close = rs_close,
 465         .write = rs_write,
 466         .put_char = rs_put_char,
 467         .flush_chars = rs_flush_chars,
 468         .write_room = rs_write_room,
 469         .chars_in_buffer = rs_chars_in_buffer,
 470         .flush_buffer = rs_flush_buffer,
 471         .ioctl = rs_ioctl,
 472         .throttle = rs_throttle,
 473         .unthrottle = rs_unthrottle,
 474         .send_xchar = rs_send_xchar,
 475         .hangup = rs_hangup,
 476         .proc_fops = &rs_proc_fops,
 477 };
 478
 479 static const struct tty_port_operations hp_port_ops = {
 480         .activate = activate,
 481         .shutdown = shutdown,
 482 };
 483
 484 static int __init simrs_init(void)
 485 {
 486         struct serial_state *state;
 487         int retval;
 488
 489         if (!ia64_platform_is("hpsim"))
 490                 return -ENODEV;
 491
 492         hp_simserial_driver = alloc_tty_driver(NR_PORTS);
 493         if (!hp_simserial_driver)
 494                 return -ENOMEM;
 495
 496         printk(KERN_INFO "SimSerial driver with no serial options enabled\n");
 497
 498         /* Initialize the tty_driver structure */
 499
 500         hp_simserial_driver->driver_name = "simserial";
 501         hp_simserial_driver->name = "ttyS";
 502         hp_simserial_driver->major = TTY_MAJOR;
 503         hp_simserial_driver->minor_start = 64;
 504         hp_simserial_driver->type = TTY_DRIVER_TYPE_SERIAL;
 505         hp_simserial_driver->subtype = SERIAL_TYPE_NORMAL;
 506         hp_simserial_driver->init_termios = tty_std_termios;
 507         hp_simserial_driver->init_termios.c_cflag =
 508                 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
 509         hp_simserial_driver->flags = TTY_DRIVER_REAL_RAW;
 510         tty_set_operations(hp_simserial_driver, &hp_ops);
 511
 512         state = rs_table;
 513         tty_port_init(&state->port);
 514         state->port.ops = &hp_port_ops;
 515         state->port.close_delay = 0; /* XXX really 0? */
 516
 517         retval = hpsim_get_irq(KEYBOARD_INTR);
 518         if (retval < 0) {
 519                 printk(KERN_ERR "%s: out of interrupt vectors!\n",
 520                                 __func__);
 521                 goto err_free_tty;
 522         }
 523
 524         state->irq = retval;
 525
 526         /* the port is imaginary */
 527         printk(KERN_INFO "ttyS0 at 0x03f8 (irq = %d) is a 16550\n", state->irq);
 528
 529         tty_port_link_device(&state->port, hp_simserial_driver, 0);
 530         retval = tty_register_driver(hp_simserial_driver);
 531         if (retval) {
 532                 printk(KERN_ERR "Couldn't register simserial driver\n");
 533                 goto err_free_tty;
 534         }
 535
 536         return 0;
 537 err_free_tty:
 538         put_tty_driver(hp_simserial_driver);
 539         tty_port_destroy(&state->port);
 540         return retval;
 541 }
 542
 543 #ifndef MODULE
 544 __initcall(simrs_init);
 545 #endif