kernel/arch/h8300/kernel/setup.c

   1 /*
   2  *  linux/arch/h8300/kernel/setup.c
   3  *
   4  *  Copyright (C) 2001-2014 Yoshinori Sato <ysato@users.sourceforge.jp>
   5  */
   6
   7 /*
   8  * This file handles the architecture-dependent parts of system setup
   9  */
  10
  11 #include <linux/kernel.h>
  12 #include <linux/sched.h>
  13 #include <linux/delay.h>
  14 #include <linux/interrupt.h>
  15 #include <linux/mm.h>
  16 #include <linux/fs.h>
  17 #include <linux/console.h>
  18 #include <linux/errno.h>
  19 #include <linux/string.h>
  20 #include <linux/bootmem.h>
  21 #include <linux/seq_file.h>
  22 #include <linux/init.h>
  23 #include <linux/platform_device.h>
  24 #include <linux/module.h>
  25 #include <linux/of.h>
  26 #include <linux/of_fdt.h>
  27 #include <linux/of_platform.h>
  28 #include <linux/of_address.h>
  29 #include <linux/clk-provider.h>
  30 #include <linux/memblock.h>
  31 #include <linux/screen_info.h>
  32 #include <linux/clocksource.h>
  33
  34 #include <asm/setup.h>
  35 #include <asm/irq.h>
  36 #include <asm/pgtable.h>
  37 #include <asm/sections.h>
  38 #include <asm/page.h>
  39
  40 #if defined(CONFIG_CPU_H8300H)
  41 #define CPU "H8/300H"
  42 #elif defined(CONFIG_CPU_H8S)
  43 #define CPU "H8S"
  44 #else
  45 #define CPU "Unknown"
  46 #endif
  47
  48 unsigned long memory_start;
  49 unsigned long memory_end;
  50 EXPORT_SYMBOL(memory_end);
  51 static unsigned long freq;
  52 extern char __dtb_start[];
  53
  54 #ifdef CONFIG_VT
  55 struct screen_info screen_info;
  56 #endif
  57
  58 char __initdata command_line[COMMAND_LINE_SIZE];
  59
  60 void sim_console_register(void);
  61
  62 void __init h8300_fdt_init(void *fdt, char *bootargs)
  63 {
  64         if (!fdt)
  65                 fdt = __dtb_start;
  66         else
  67                 strcpy(command_line, bootargs);
  68
  69         early_init_dt_scan(fdt);
  70         memblock_allow_resize();
  71 }
  72
  73 static void __init bootmem_init(void)
  74 {
  75         int bootmap_size;
  76         unsigned long ram_start_pfn;
  77         unsigned long free_ram_start_pfn;
  78         unsigned long ram_end_pfn;
  79         struct memblock_region *region;
  80
  81         memory_end = memory_start = 0;
  82
  83         /* Find main memory where is the kernel */
  84         for_each_memblock(memory, region) {
  85                 memory_start = region->base;
  86                 memory_end = region->base + region->size;
  87         }
  88
  89         if (!memory_end)
  90                 panic("No memory!");
  91
  92         ram_start_pfn = PFN_UP(memory_start);
  93         /* free_ram_start_pfn is first page after kernel */
  94         free_ram_start_pfn = PFN_UP(__pa(_end));
  95         ram_end_pfn = PFN_DOWN(memblock_end_of_DRAM());
  96
  97         max_pfn = ram_end_pfn;
  98
  99         /*
 100          * give all the memory to the bootmap allocator,  tell it to put the
 101          * boot mem_map at the start of memory
 102          */
 103         bootmap_size = init_bootmem_node(NODE_DATA(0),
 104                                          free_ram_start_pfn,
 105                                          0,
 106                                          ram_end_pfn);
 107         /*
 108          * free the usable memory,  we have to make sure we do not free
 109          * the bootmem bitmap so we then reserve it after freeing it :-)
 110          */
 111         free_bootmem(PFN_PHYS(free_ram_start_pfn),
 112                      (ram_end_pfn - free_ram_start_pfn) << PAGE_SHIFT);
 113         reserve_bootmem(PFN_PHYS(free_ram_start_pfn), bootmap_size,
 114                         BOOTMEM_DEFAULT);
 115
 116         for_each_memblock(reserved, region) {
 117                 reserve_bootmem(region->base, region->size, BOOTMEM_DEFAULT);
 118         }
 119 }
 120
 121 void __init setup_arch(char **cmdline_p)
 122 {
 123         unflatten_and_copy_device_tree();
 124
 125         init_mm.start_code = (unsigned long) _stext;
 126         init_mm.end_code = (unsigned long) _etext;
 127         init_mm.end_data = (unsigned long) _edata;
 128         init_mm.brk = (unsigned long) 0;
 129
 130         pr_notice("\r\n\nuClinux " CPU "\n");
 131         pr_notice("Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne\n");
 132
 133         if (*command_line)
 134                 strcpy(boot_command_line, command_line);
 135         *cmdline_p = boot_command_line;
 136
 137         parse_early_param();
 138
 139         bootmem_init();
 140 #if defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)
 141         sim_console_register();
 142 #endif
 143
 144         early_platform_driver_probe("earlyprintk", 1, 0);
 145         /*
 146          * get kmalloc into gear
 147          */
 148         paging_init();
 149 }
 150
 151 /*
 152  *      Get CPU information for use by the procfs.
 153  */
 154
 155 static int show_cpuinfo(struct seq_file *m, void *v)
 156 {
 157         char *cpu;
 158
 159         cpu = CPU;
 160
 161         seq_printf(m,  "CPU:\t\t%s\n"
 162                    "Clock:\t\t%lu.%1luMHz\n"
 163                    "BogoMips:\t%lu.%02lu\n"
 164                    "Calibration:\t%lu loops\n",
 165                    cpu,
 166                    freq/1000, freq%1000,
 167                    (loops_per_jiffy*HZ)/500000,
 168                    ((loops_per_jiffy*HZ)/5000)%100,
 169                    (loops_per_jiffy*HZ));
 170
 171         return 0;
 172 }
 173
 174 static void *c_start(struct seq_file *m, loff_t *pos)
 175 {
 176         return *pos < num_possible_cpus() ?
 177                 ((void *) 0x12345678) : NULL;
 178 }
 179
 180 static void *c_next(struct seq_file *m, void *v, loff_t *pos)
 181 {
 182         ++*pos;
 183         return c_start(m, pos);
 184 }
 185
 186 static void c_stop(struct seq_file *m, void *v)
 187 {
 188 }
 189
 190 const struct seq_operations cpuinfo_op = {
 191         .start  = c_start,
 192         .next   = c_next,
 193         .stop   = c_stop,
 194         .show   = show_cpuinfo,
 195 };
 196
 197 static int __init device_probe(void)
 198 {
 199         of_platform_populate(NULL, NULL, NULL, NULL);
 200
 201         return 0;
 202 }
 203
 204 device_initcall(device_probe);
 205
 206 #if defined(CONFIG_CPU_H8300H)
 207 #define get_wait(base, addr) ({         \
 208         int baddr;                      \
 209         baddr = ((addr) / 0x200000 * 2);                             \
 210         w *= (ctrl_inw((unsigned long)(base) + 2) & (3 << baddr)) + 1;  \
 211         })
 212 #endif
 213 #if defined(CONFIG_CPU_H8S)
 214 #define get_wait(base, addr) ({         \
 215         int baddr;                      \
 216         baddr = ((addr) / 0x200000 * 16);                            \
 217         w *= (ctrl_inl((unsigned long)(base) + 2) & (7 << baddr)) + 1;  \
 218         })
 219 #endif
 220
 221 static __init int access_timing(void)
 222 {
 223         struct device_node *bsc;
 224         void __iomem *base;
 225         unsigned long addr = (unsigned long)&__delay;
 226         int bit = 1 << (addr / 0x200000);
 227         int w;
 228
 229         bsc = of_find_compatible_node(NULL, NULL, "renesas,h8300-bsc");
 230         base = of_iomap(bsc, 0);
 231         w = (ctrl_inb((unsigned long)base + 0) & bit)?2:1;
 232         if (ctrl_inb((unsigned long)base + 1) & bit)
 233                 w *= get_wait(base, addr);
 234         else
 235                 w *= 2;
 236         return w * 3 / 2;
 237 }
 238
 239 void __init calibrate_delay(void)
 240 {
 241         struct device_node *cpu;
 242         int freq;
 243
 244         cpu = of_find_compatible_node(NULL, NULL, "renesas,h8300");
 245         of_property_read_s32(cpu, "clock-frequency", &freq);
 246         loops_per_jiffy = freq / HZ / (access_timing() * 2);
 247         pr_cont("%lu.%02lu BogoMIPS (lpj=%lu)\n",
 248                 loops_per_jiffy / (500000 / HZ),
 249                 (loops_per_jiffy / (5000 / HZ)) % 100, loops_per_jiffy);
 250 }
 251
 252
 253 void __init time_init(void)
 254 {
 255         of_clk_init(NULL);
 256         clocksource_probe();
 257 }