Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / arch / cris / arch-v10 / kernel / ptrace.c
1 /*
2  * Copyright (C) 2000-2003, Axis Communications AB.
3  */
4
5 #include <linux/kernel.h>
6 #include <linux/sched.h>
7 #include <linux/mm.h>
8 #include <linux/smp.h>
9 #include <linux/errno.h>
10 #include <linux/ptrace.h>
11 #include <linux/user.h>
12 #include <linux/signal.h>
13 #include <linux/security.h>
14
15 #include <asm/uaccess.h>
16 #include <asm/page.h>
17 #include <asm/pgtable.h>
18 #include <asm/processor.h>
19
20 /* 
21  * Determines which bits in DCCR the user has access to.
22  * 1 = access, 0 = no access.
23  */
24 #define DCCR_MASK 0x0000001f     /* XNZVC */
25
26 /*
27  * Get contents of register REGNO in task TASK.
28  */
29 inline long get_reg(struct task_struct *task, unsigned int regno)
30 {
31         /* USP is a special case, it's not in the pt_regs struct but
32          * in the tasks thread struct
33          */
34
35         if (regno == PT_USP)
36                 return task->thread.usp;
37         else if (regno < PT_MAX)
38                 return ((unsigned long *)task_pt_regs(task))[regno];
39         else
40                 return 0;
41 }
42
43 /*
44  * Write contents of register REGNO in task TASK.
45  */
46 inline int put_reg(struct task_struct *task, unsigned int regno,
47                           unsigned long data)
48 {
49         if (regno == PT_USP)
50                 task->thread.usp = data;
51         else if (regno < PT_MAX)
52                 ((unsigned long *)task_pt_regs(task))[regno] = data;
53         else
54                 return -1;
55         return 0;
56 }
57
58 /*
59  * Called by kernel/ptrace.c when detaching.
60  *
61  * Make sure the single step bit is not set.
62  */
63 void 
64 ptrace_disable(struct task_struct *child)
65 {
66        /* Todo - pending singlesteps? */
67        clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
68 }
69
70 /* 
71  * Note that this implementation of ptrace behaves differently from vanilla
72  * ptrace.  Contrary to what the man page says, in the PTRACE_PEEKTEXT,
73  * PTRACE_PEEKDATA, and PTRACE_PEEKUSER requests the data variable is not
74  * ignored.  Instead, the data variable is expected to point at a location
75  * (in user space) where the result of the ptrace call is written (instead of
76  * being returned).
77  */
78 long arch_ptrace(struct task_struct *child, long request,
79                  unsigned long addr, unsigned long data)
80 {
81         int ret;
82         unsigned int regno = addr >> 2;
83         unsigned long __user *datap = (unsigned long __user *)data;
84
85         switch (request) {
86                 /* Read word at location address. */ 
87                 case PTRACE_PEEKTEXT:
88                 case PTRACE_PEEKDATA:
89                         ret = generic_ptrace_peekdata(child, addr, data);
90                         break;
91
92                 /* Read the word at location address in the USER area. */
93                 case PTRACE_PEEKUSR: {
94                         unsigned long tmp;
95
96                         ret = -EIO;
97                         if ((addr & 3) || regno > PT_MAX)
98                                 break;
99
100                         tmp = get_reg(child, regno);
101                         ret = put_user(tmp, datap);
102                         break;
103                 }
104                 
105                 /* Write the word at location address. */
106                 case PTRACE_POKETEXT:
107                 case PTRACE_POKEDATA:
108                         ret = generic_ptrace_pokedata(child, addr, data);
109                         break;
110  
111                 /* Write the word at location address in the USER area. */
112                 case PTRACE_POKEUSR:
113                         ret = -EIO;
114                         if ((addr & 3) || regno > PT_MAX)
115                                 break;
116
117                         if (regno == PT_DCCR) {
118                                 /* don't allow the tracing process to change stuff like
119                                  * interrupt enable, kernel/user bit, dma enables etc.
120                                  */
121                                 data &= DCCR_MASK;
122                                 data |= get_reg(child, PT_DCCR) & ~DCCR_MASK;
123                         }
124                         if (put_reg(child, regno, data))
125                                 break;
126                         ret = 0;
127                         break;
128
129                 /* Get all GP registers from the child. */
130                 case PTRACE_GETREGS: {
131                         int i;
132                         unsigned long tmp;
133                         
134                         ret = 0;
135                         for (i = 0; i <= PT_MAX; i++) {
136                                 tmp = get_reg(child, i);
137                                 
138                                 if (put_user(tmp, datap)) {
139                                         ret = -EFAULT;
140                                         break;
141                                 }
142                                 
143                                 datap++;
144                         }
145
146                         break;
147                 }
148
149                 /* Set all GP registers in the child. */
150                 case PTRACE_SETREGS: {
151                         int i;
152                         unsigned long tmp;
153                         
154                         ret = 0;
155                         for (i = 0; i <= PT_MAX; i++) {
156                                 if (get_user(tmp, datap)) {
157                                         ret = -EFAULT;
158                                         break;
159                                 }
160                                 
161                                 if (i == PT_DCCR) {
162                                         tmp &= DCCR_MASK;
163                                         tmp |= get_reg(child, PT_DCCR) & ~DCCR_MASK;
164                                 }
165                                 
166                                 put_reg(child, i, tmp);
167                                 datap++;
168                         }
169                         
170                         break;
171                 }
172
173                 default:
174                         ret = ptrace_request(child, request, addr, data);
175                         break;
176         }
177
178         return ret;
179 }
180
181 void do_syscall_trace(void)
182 {
183         if (!test_thread_flag(TIF_SYSCALL_TRACE))
184                 return;
185         
186         if (!(current->ptrace & PT_PTRACED))
187                 return;
188         
189         /* the 0x80 provides a way for the tracing parent to distinguish
190            between a syscall stop and SIGTRAP delivery */
191         ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
192                                  ? 0x80 : 0));
193         
194         /*
195          * This isn't the same as continuing with a signal, but it will do for
196          * normal use.
197          */
198         if (current->exit_code) {
199                 send_sig(current->exit_code, current, 1);
200                 current->exit_code = 0;
201         }
202 }