kernel/arch/arm64/boot/dts/qcom/pm8916.dtsi

   1 #include <dt-bindings/iio/qcom,spmi-vadc.h>
   2 #include <dt-bindings/interrupt-controller/irq.h>
   3 #include <dt-bindings/spmi/spmi.h>
   4
   5 &spmi_bus {
   6
   7         usid0: pm8916@0 {
   8                 compatible = "qcom,spmi-pmic";
   9                 reg = <0x0 SPMI_USID>;
  10                 #address-cells = <1>;
  11                 #size-cells = <0>;
  12
  13                 rtc@6000 {
  14                         compatible = "qcom,pm8941-rtc";
  15                         reg = <0x6000 0x6100>;
  16                         reg-names = "rtc", "alarm";
  17                         interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
  18                 };
  19
  20                 pwrkey@800 {
  21                         compatible = "qcom,pm8941-pwrkey";
  22                         reg = <0x800>;
  23                         interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
  24                         debounce = <15625>;
  25                         bias-pull-up;
  26                 };
  27
  28                 pm8916_gpios: gpios@c000 {
  29                         compatible = "qcom,pm8916-gpio";
  30                         reg = <0xc000 0x400>;
  31                         gpio-controller;
  32                         #gpio-cells = <2>;
  33                         interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
  34                                      <0 0xc1 0 IRQ_TYPE_NONE>,
  35                                      <0 0xc2 0 IRQ_TYPE_NONE>,
  36                                      <0 0xc3 0 IRQ_TYPE_NONE>;
  37                 };
  38
  39                 pm8916_mpps: mpps@a000 {
  40                         compatible = "qcom,pm8916-mpp";
  41                         reg = <0xa000 0x400>;
  42                         gpio-controller;
  43                         #gpio-cells = <2>;
  44                         interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
  45                                      <0 0xa1 0 IRQ_TYPE_NONE>,
  46                                      <0 0xa2 0 IRQ_TYPE_NONE>,
  47                                      <0 0xa3 0 IRQ_TYPE_NONE>;
  48                 };
  49
  50                 pm8916_temp: temp-alarm@2400 {
  51                         compatible = "qcom,spmi-temp-alarm";
  52                         reg = <0x2400 0x100>;
  53                         interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
  54                         io-channels = <&pm8916_vadc VADC_DIE_TEMP>;
  55                         io-channel-names = "thermal";
  56                         #thermal-sensor-cells = <0>;
  57                 };
  58
  59                 pm8916_vadc: vadc@3100 {
  60                         compatible = "qcom,spmi-vadc";
  61                         reg = <0x3100 0x100>;
  62                         interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
  63                         #address-cells = <1>;
  64                         #size-cells = <0>;
  65                         #io-channel-cells = <1>;
  66
  67                         usb_in {
  68                                 reg = <VADC_USBIN>;
  69                                 qcom,pre-scaling = <1 10>;
  70                         };
  71                         vph_pwr {
  72                                 reg = <VADC_VSYS>;
  73                                 qcom,pre-scaling = <1 3>;
  74                         };
  75                         die_temp {
  76                                 reg = <VADC_DIE_TEMP>;
  77                         };
  78                         ref_625mv {
  79                                 reg = <VADC_REF_625MV>;
  80                         };
  81                         ref_1250v {
  82                                 reg = <VADC_REF_1250MV>;
  83                         };
  84                         ref_gnd {
  85                                 reg = <VADC_GND_REF>;
  86                         };
  87                         ref_vdd {
  88                                 reg = <VADC_VDD_VADC>;
  89                         };
  90                 };
  91         };
  92
  93         usid1: pm8916@1 {
  94                 compatible = "qcom,spmi-pmic";
  95                 reg = <0x1 SPMI_USID>;
  96                 #address-cells = <1>;
  97                 #size-cells = <0>;
  98         };
  99 };