kernel/arch/arm/mach-versatile/core.c

   1 /*
   2  *  linux/arch/arm/mach-versatile/core.c
   3  *
   4  *  Copyright (C) 1999 - 2003 ARM Limited
   5  *  Copyright (C) 2000 Deep Blue Solutions Ltd
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; either version 2 of the License, or
  10  * (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  20  */
  21 #include <linux/init.h>
  22 #include <linux/device.h>
  23 #include <linux/dma-mapping.h>
  24 #include <linux/platform_device.h>
  25 #include <linux/interrupt.h>
  26 #include <linux/irqdomain.h>
  27 #include <linux/of_address.h>
  28 #include <linux/of_platform.h>
  29 #include <linux/amba/bus.h>
  30 #include <linux/amba/clcd.h>
  31 #include <linux/platform_data/video-clcd-versatile.h>
  32 #include <linux/amba/pl061.h>
  33 #include <linux/amba/mmci.h>
  34 #include <linux/amba/pl022.h>
  35 #include <linux/io.h>
  36 #include <linux/irqchip/arm-vic.h>
  37 #include <linux/irqchip/versatile-fpga.h>
  38 #include <linux/gfp.h>
  39 #include <linux/clkdev.h>
  40 #include <linux/mtd/physmap.h>
  41 #include <linux/bitops.h>
  42 #include <linux/reboot.h>
  43
  44 #include <asm/irq.h>
  45 #include <asm/hardware/arm_timer.h>
  46 #include <asm/hardware/icst.h>
  47 #include <asm/mach-types.h>
  48
  49 #include <asm/mach/arch.h>
  50 #include <asm/mach/irq.h>
  51 #include <asm/mach/time.h>
  52 #include <asm/mach/map.h>
  53 #include <mach/hardware.h>
  54 #include <mach/platform.h>
  55 #include <asm/hardware/timer-sp.h>
  56
  57 #include <plat/sched_clock.h>
  58
  59 #include "core.h"
  60
  61 /*
  62  * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
  63  * is the (PA >> 12).
  64  *
  65  * Setup a VA for the Versatile Vectored Interrupt Controller.
  66  */
  67 #define VA_VIC_BASE             __io_address(VERSATILE_VIC_BASE)
  68 #define VA_SIC_BASE             __io_address(VERSATILE_SIC_BASE)
  69
  70 /* These PIC IRQs are valid in each configuration */
  71 #define PIC_VALID_ALL   BIT(SIC_INT_KMI0) | BIT(SIC_INT_KMI1) | \
  72                         BIT(SIC_INT_SCI3) | BIT(SIC_INT_UART3) | \
  73                         BIT(SIC_INT_CLCD) | BIT(SIC_INT_TOUCH) | \
  74                         BIT(SIC_INT_KEYPAD) | BIT(SIC_INT_DoC) | \
  75                         BIT(SIC_INT_USB) | BIT(SIC_INT_PCI0) | \
  76                         BIT(SIC_INT_PCI1) | BIT(SIC_INT_PCI2) | \
  77                         BIT(SIC_INT_PCI3)
  78 #if 1
  79 #define IRQ_MMCI0A      IRQ_VICSOURCE22
  80 #define IRQ_AACI        IRQ_VICSOURCE24
  81 #define IRQ_ETH         IRQ_VICSOURCE25
  82 #define PIC_MASK        0xFFD00000
  83 #define PIC_VALID       PIC_VALID_ALL
  84 #else
  85 #define IRQ_MMCI0A      IRQ_SIC_MMCI0A
  86 #define IRQ_AACI        IRQ_SIC_AACI
  87 #define IRQ_ETH         IRQ_SIC_ETH
  88 #define PIC_MASK        0
  89 #define PIC_VALID       PIC_VALID_ALL | BIT(SIC_INT_MMCI0A) | \
  90                         BIT(SIC_INT_MMCI1A) | BIT(SIC_INT_AACI) | \
  91                         BIT(SIC_INT_ETH)
  92 #endif
  93
  94 /* Lookup table for finding a DT node that represents the vic instance */
  95 static const struct of_device_id vic_of_match[] __initconst = {
  96         { .compatible = "arm,versatile-vic", },
  97         {}
  98 };
  99
 100 static const struct of_device_id sic_of_match[] __initconst = {
 101         { .compatible = "arm,versatile-sic", },
 102         {}
 103 };
 104
 105 void __init versatile_init_irq(void)
 106 {
 107         struct device_node *np;
 108
 109         np = of_find_matching_node_by_address(NULL, vic_of_match,
 110                                               VERSATILE_VIC_BASE);
 111         __vic_init(VA_VIC_BASE, 0, IRQ_VIC_START, ~0, 0, np);
 112
 113         writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);
 114
 115         np = of_find_matching_node_by_address(NULL, sic_of_match,
 116                                               VERSATILE_SIC_BASE);
 117
 118         fpga_irq_init(VA_SIC_BASE, "SIC", IRQ_SIC_START,
 119                 IRQ_VICSOURCE31, PIC_VALID, np);
 120
 121         /*
 122          * Interrupts on secondary controller from 0 to 8 are routed to
 123          * source 31 on PIC.
 124          * Interrupts from 21 to 31 are routed directly to the VIC on
 125          * the corresponding number on primary controller. This is controlled
 126          * by setting PIC_ENABLEx.
 127          */
 128         writel(PIC_MASK, VA_SIC_BASE + SIC_INT_PIC_ENABLE);
 129 }
 130
 131 static struct map_desc versatile_io_desc[] __initdata __maybe_unused = {
 132         {
 133                 .virtual        =  IO_ADDRESS(VERSATILE_SYS_BASE),
 134                 .pfn            = __phys_to_pfn(VERSATILE_SYS_BASE),
 135                 .length         = SZ_4K,
 136                 .type           = MT_DEVICE
 137         }, {
 138                 .virtual        =  IO_ADDRESS(VERSATILE_SIC_BASE),
 139                 .pfn            = __phys_to_pfn(VERSATILE_SIC_BASE),
 140                 .length         = SZ_4K,
 141                 .type           = MT_DEVICE
 142         }, {
 143                 .virtual        =  IO_ADDRESS(VERSATILE_VIC_BASE),
 144                 .pfn            = __phys_to_pfn(VERSATILE_VIC_BASE),
 145                 .length         = SZ_4K,
 146                 .type           = MT_DEVICE
 147         }, {
 148                 .virtual        =  IO_ADDRESS(VERSATILE_SCTL_BASE),
 149                 .pfn            = __phys_to_pfn(VERSATILE_SCTL_BASE),
 150                 .length         = SZ_4K * 9,
 151                 .type           = MT_DEVICE
 152         },
 153 #ifdef CONFIG_MACH_VERSATILE_AB
 154         {
 155                 .virtual        =  IO_ADDRESS(VERSATILE_IB2_BASE),
 156                 .pfn            = __phys_to_pfn(VERSATILE_IB2_BASE),
 157                 .length         = SZ_64M,
 158                 .type           = MT_DEVICE
 159         },
 160 #endif
 161 #ifdef CONFIG_DEBUG_LL
 162         {
 163                 .virtual        =  IO_ADDRESS(VERSATILE_UART0_BASE),
 164                 .pfn            = __phys_to_pfn(VERSATILE_UART0_BASE),
 165                 .length         = SZ_4K,
 166                 .type           = MT_DEVICE
 167         },
 168 #endif
 169 #ifdef CONFIG_PCI
 170         {
 171                 .virtual        =  IO_ADDRESS(VERSATILE_PCI_CORE_BASE),
 172                 .pfn            = __phys_to_pfn(VERSATILE_PCI_CORE_BASE),
 173                 .length         = SZ_4K,
 174                 .type           = MT_DEVICE
 175         }, {
 176                 .virtual        =  (unsigned long)VERSATILE_PCI_VIRT_BASE,
 177                 .pfn            = __phys_to_pfn(VERSATILE_PCI_BASE),
 178                 .length         = VERSATILE_PCI_BASE_SIZE,
 179                 .type           = MT_DEVICE
 180         }, {
 181                 .virtual        =  (unsigned long)VERSATILE_PCI_CFG_VIRT_BASE,
 182                 .pfn            = __phys_to_pfn(VERSATILE_PCI_CFG_BASE),
 183                 .length         = VERSATILE_PCI_CFG_BASE_SIZE,
 184                 .type           = MT_DEVICE
 185         },
 186 #endif
 187 };
 188
 189 void __init versatile_map_io(void)
 190 {
 191         iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc));
 192 }
 193
 194
 195 #define VERSATILE_FLASHCTRL    (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET)
 196
 197 static void versatile_flash_set_vpp(struct platform_device *pdev, int on)
 198 {
 199         u32 val;
 200
 201         val = __raw_readl(VERSATILE_FLASHCTRL);
 202         if (on)
 203                 val |= VERSATILE_FLASHPROG_FLVPPEN;
 204         else
 205                 val &= ~VERSATILE_FLASHPROG_FLVPPEN;
 206         __raw_writel(val, VERSATILE_FLASHCTRL);
 207 }
 208
 209 static struct physmap_flash_data versatile_flash_data = {
 210         .width                  = 4,
 211         .set_vpp                = versatile_flash_set_vpp,
 212 };
 213
 214 static struct resource versatile_flash_resource = {
 215         .start                  = VERSATILE_FLASH_BASE,
 216         .end                    = VERSATILE_FLASH_BASE + VERSATILE_FLASH_SIZE - 1,
 217         .flags                  = IORESOURCE_MEM,
 218 };
 219
 220 static struct platform_device versatile_flash_device = {
 221         .name                   = "physmap-flash",
 222         .id                     = 0,
 223         .dev                    = {
 224                 .platform_data  = &versatile_flash_data,
 225         },
 226         .num_resources          = 1,
 227         .resource               = &versatile_flash_resource,
 228 };
 229
 230 static struct resource smc91x_resources[] = {
 231         [0] = {
 232                 .start          = VERSATILE_ETH_BASE,
 233                 .end            = VERSATILE_ETH_BASE + SZ_64K - 1,
 234                 .flags          = IORESOURCE_MEM,
 235         },
 236         [1] = {
 237                 .start          = IRQ_ETH,
 238                 .end            = IRQ_ETH,
 239                 .flags          = IORESOURCE_IRQ,
 240         },
 241 };
 242
 243 static struct platform_device smc91x_device = {
 244         .name           = "smc91x",
 245         .id             = 0,
 246         .num_resources  = ARRAY_SIZE(smc91x_resources),
 247         .resource       = smc91x_resources,
 248 };
 249
 250 static struct resource versatile_i2c_resource = {
 251         .start                  = VERSATILE_I2C_BASE,
 252         .end                    = VERSATILE_I2C_BASE + SZ_4K - 1,
 253         .flags                  = IORESOURCE_MEM,
 254 };
 255
 256 static struct platform_device versatile_i2c_device = {
 257         .name                   = "versatile-i2c",
 258         .id                     = 0,
 259         .num_resources          = 1,
 260         .resource               = &versatile_i2c_resource,
 261 };
 262
 263 static struct i2c_board_info versatile_i2c_board_info[] = {
 264         {
 265                 I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
 266         },
 267 };
 268
 269 static int __init versatile_i2c_init(void)
 270 {
 271         return i2c_register_board_info(0, versatile_i2c_board_info,
 272                                        ARRAY_SIZE(versatile_i2c_board_info));
 273 }
 274 arch_initcall(versatile_i2c_init);
 275
 276 #define VERSATILE_SYSMCI        (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET)
 277
 278 unsigned int mmc_status(struct device *dev)
 279 {
 280         struct amba_device *adev = container_of(dev, struct amba_device, dev);
 281         u32 mask;
 282
 283         if (adev->res.start == VERSATILE_MMCI0_BASE)
 284                 mask = 1;
 285         else
 286                 mask = 2;
 287
 288         return readl(VERSATILE_SYSMCI) & mask;
 289 }
 290
 291 static struct mmci_platform_data mmc0_plat_data = {
 292         .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
 293         .status         = mmc_status,
 294         .gpio_wp        = -1,
 295         .gpio_cd        = -1,
 296 };
 297
 298 static struct resource char_lcd_resources[] = {
 299         {
 300                 .start = VERSATILE_CHAR_LCD_BASE,
 301                 .end   = (VERSATILE_CHAR_LCD_BASE + SZ_4K - 1),
 302                 .flags = IORESOURCE_MEM,
 303         },
 304 };
 305
 306 static struct platform_device char_lcd_device = {
 307         .name           =       "arm-charlcd",
 308         .id             =       -1,
 309         .num_resources  =       ARRAY_SIZE(char_lcd_resources),
 310         .resource       =       char_lcd_resources,
 311 };
 312
 313 static struct resource leds_resources[] = {
 314         {
 315                 .start  = VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET,
 316                 .end    = VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET + 4,
 317                 .flags  = IORESOURCE_MEM,
 318         },
 319 };
 320
 321 static struct platform_device leds_device = {
 322         .name           = "versatile-leds",
 323         .id             = -1,
 324         .num_resources  = ARRAY_SIZE(leds_resources),
 325         .resource       = leds_resources,
 326 };
 327
 328 /*
 329  * Clock handling
 330  */
 331 static const struct icst_params versatile_oscvco_params = {
 332         .ref            = 24000000,
 333         .vco_max        = ICST307_VCO_MAX,
 334         .vco_min        = ICST307_VCO_MIN,
 335         .vd_min         = 4 + 8,
 336         .vd_max         = 511 + 8,
 337         .rd_min         = 1 + 2,
 338         .rd_max         = 127 + 2,
 339         .s2div          = icst307_s2div,
 340         .idx2s          = icst307_idx2s,
 341 };
 342
 343 static void versatile_oscvco_set(struct clk *clk, struct icst_vco vco)
 344 {
 345         void __iomem *sys_lock = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET;
 346         u32 val;
 347
 348         val = readl(clk->vcoreg) & ~0x7ffff;
 349         val |= vco.v | (vco.r << 9) | (vco.s << 16);
 350
 351         writel(0xa05f, sys_lock);
 352         writel(val, clk->vcoreg);
 353         writel(0, sys_lock);
 354 }
 355
 356 static const struct clk_ops osc4_clk_ops = {
 357         .round  = icst_clk_round,
 358         .set    = icst_clk_set,
 359         .setvco = versatile_oscvco_set,
 360 };
 361
 362 static struct clk osc4_clk = {
 363         .ops    = &osc4_clk_ops,
 364         .params = &versatile_oscvco_params,
 365 };
 366
 367 /*
 368  * These are fixed clocks.
 369  */
 370 static struct clk ref24_clk = {
 371         .rate   = 24000000,
 372 };
 373
 374 static struct clk sp804_clk = {
 375         .rate   = 1000000,
 376 };
 377
 378 static struct clk dummy_apb_pclk;
 379
 380 static struct clk_lookup lookups[] = {
 381         {       /* AMBA bus clock */
 382                 .con_id         = "apb_pclk",
 383                 .clk            = &dummy_apb_pclk,
 384         }, {    /* UART0 */
 385                 .dev_id         = "dev:f1",
 386                 .clk            = &ref24_clk,
 387         }, {    /* UART1 */
 388                 .dev_id         = "dev:f2",
 389                 .clk            = &ref24_clk,
 390         }, {    /* UART2 */
 391                 .dev_id         = "dev:f3",
 392                 .clk            = &ref24_clk,
 393         }, {    /* UART3 */
 394                 .dev_id         = "fpga:09",
 395                 .clk            = &ref24_clk,
 396         }, {    /* KMI0 */
 397                 .dev_id         = "fpga:06",
 398                 .clk            = &ref24_clk,
 399         }, {    /* KMI1 */
 400                 .dev_id         = "fpga:07",
 401                 .clk            = &ref24_clk,
 402         }, {    /* MMC0 */
 403                 .dev_id         = "fpga:05",
 404                 .clk            = &ref24_clk,
 405         }, {    /* MMC1 */
 406                 .dev_id         = "fpga:0b",
 407                 .clk            = &ref24_clk,
 408         }, {    /* SSP */
 409                 .dev_id         = "dev:f4",
 410                 .clk            = &ref24_clk,
 411         }, {    /* CLCD */
 412                 .dev_id         = "dev:20",
 413                 .clk            = &osc4_clk,
 414         }, {    /* SP804 timers */
 415                 .dev_id         = "sp804",
 416                 .clk            = &sp804_clk,
 417         },
 418 };
 419
 420 /*
 421  * CLCD support.
 422  */
 423 #define SYS_CLCD_MODE_MASK      (3 << 0)
 424 #define SYS_CLCD_MODE_888       (0 << 0)
 425 #define SYS_CLCD_MODE_5551      (1 << 0)
 426 #define SYS_CLCD_MODE_565_RLSB  (2 << 0)
 427 #define SYS_CLCD_MODE_565_BLSB  (3 << 0)
 428 #define SYS_CLCD_NLCDIOON       (1 << 2)
 429 #define SYS_CLCD_VDDPOSSWITCH   (1 << 3)
 430 #define SYS_CLCD_PWR3V5SWITCH   (1 << 4)
 431 #define SYS_CLCD_ID_MASK        (0x1f << 8)
 432 #define SYS_CLCD_ID_SANYO_3_8   (0x00 << 8)
 433 #define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8)
 434 #define SYS_CLCD_ID_EPSON_2_2   (0x02 << 8)
 435 #define SYS_CLCD_ID_SANYO_2_5   (0x07 << 8)
 436 #define SYS_CLCD_ID_VGA         (0x1f << 8)
 437
 438 static bool is_sanyo_2_5_lcd;
 439
 440 /*
 441  * Disable all display connectors on the interface module.
 442  */
 443 static void versatile_clcd_disable(struct clcd_fb *fb)
 444 {
 445         void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
 446         u32 val;
 447
 448         val = readl(sys_clcd);
 449         val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
 450         writel(val, sys_clcd);
 451
 452 #ifdef CONFIG_MACH_VERSATILE_AB
 453         /*
 454          * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off
 455          */
 456         if (machine_is_versatile_ab() && is_sanyo_2_5_lcd) {
 457                 void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
 458                 unsigned long ctrl;
 459
 460                 ctrl = readl(versatile_ib2_ctrl);
 461                 ctrl &= ~0x01;
 462                 writel(ctrl, versatile_ib2_ctrl);
 463         }
 464 #endif
 465 }
 466
 467 /*
 468  * Enable the relevant connector on the interface module.
 469  */
 470 static void versatile_clcd_enable(struct clcd_fb *fb)
 471 {
 472         struct fb_var_screeninfo *var = &fb->fb.var;
 473         void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
 474         u32 val;
 475
 476         val = readl(sys_clcd);
 477         val &= ~SYS_CLCD_MODE_MASK;
 478
 479         switch (var->green.length) {
 480         case 5:
 481                 val |= SYS_CLCD_MODE_5551;
 482                 break;
 483         case 6:
 484                 if (var->red.offset == 0)
 485                         val |= SYS_CLCD_MODE_565_RLSB;
 486                 else
 487                         val |= SYS_CLCD_MODE_565_BLSB;
 488                 break;
 489         case 8:
 490                 val |= SYS_CLCD_MODE_888;
 491                 break;
 492         }
 493
 494         /*
 495          * Set the MUX
 496          */
 497         writel(val, sys_clcd);
 498
 499         /*
 500          * And now enable the PSUs
 501          */
 502         val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
 503         writel(val, sys_clcd);
 504
 505 #ifdef CONFIG_MACH_VERSATILE_AB
 506         /*
 507          * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on
 508          */
 509         if (machine_is_versatile_ab() && is_sanyo_2_5_lcd) {
 510                 void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
 511                 unsigned long ctrl;
 512
 513                 ctrl = readl(versatile_ib2_ctrl);
 514                 ctrl |= 0x01;
 515                 writel(ctrl, versatile_ib2_ctrl);
 516         }
 517 #endif
 518 }
 519
 520 /*
 521  * Detect which LCD panel is connected, and return the appropriate
 522  * clcd_panel structure.  Note: we do not have any information on
 523  * the required timings for the 8.4in panel, so we presently assume
 524  * VGA timings.
 525  */
 526 static int versatile_clcd_setup(struct clcd_fb *fb)
 527 {
 528         void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
 529         const char *panel_name;
 530         u32 val;
 531
 532         is_sanyo_2_5_lcd = false;
 533
 534         val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
 535         if (val == SYS_CLCD_ID_SANYO_3_8)
 536                 panel_name = "Sanyo TM38QV67A02A";
 537         else if (val == SYS_CLCD_ID_SANYO_2_5) {
 538                 panel_name = "Sanyo QVGA Portrait";
 539                 is_sanyo_2_5_lcd = true;
 540         } else if (val == SYS_CLCD_ID_EPSON_2_2)
 541                 panel_name = "Epson L2F50113T00";
 542         else if (val == SYS_CLCD_ID_VGA)
 543                 panel_name = "VGA";
 544         else {
 545                 printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
 546                         val);
 547                 panel_name = "VGA";
 548         }
 549
 550         fb->panel = versatile_clcd_get_panel(panel_name);
 551         if (!fb->panel)
 552                 return -EINVAL;
 553
 554         return versatile_clcd_setup_dma(fb, SZ_1M);
 555 }
 556
 557 static void versatile_clcd_decode(struct clcd_fb *fb, struct clcd_regs *regs)
 558 {
 559         clcdfb_decode(fb, regs);
 560
 561         /* Always clear BGR for RGB565: we do the routing externally */
 562         if (fb->fb.var.green.length == 6)
 563                 regs->cntl &= ~CNTL_BGR;
 564 }
 565
 566 static struct clcd_board clcd_plat_data = {
 567         .name           = "Versatile",
 568         .caps           = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888,
 569         .check          = clcdfb_check,
 570         .decode         = versatile_clcd_decode,
 571         .disable        = versatile_clcd_disable,
 572         .enable         = versatile_clcd_enable,
 573         .setup          = versatile_clcd_setup,
 574         .mmap           = versatile_clcd_mmap_dma,
 575         .remove         = versatile_clcd_remove_dma,
 576 };
 577
 578 static struct pl061_platform_data gpio0_plat_data = {
 579         .gpio_base      = 0,
 580         .irq_base       = IRQ_GPIO0_START,
 581 };
 582
 583 static struct pl061_platform_data gpio1_plat_data = {
 584         .gpio_base      = 8,
 585         .irq_base       = IRQ_GPIO1_START,
 586 };
 587
 588 static struct pl061_platform_data gpio2_plat_data = {
 589         .gpio_base      = 16,
 590         .irq_base       = IRQ_GPIO2_START,
 591 };
 592
 593 static struct pl061_platform_data gpio3_plat_data = {
 594         .gpio_base      = 24,
 595         .irq_base       = IRQ_GPIO3_START,
 596 };
 597
 598 static struct pl022_ssp_controller ssp0_plat_data = {
 599         .bus_id = 0,
 600         .enable_dma = 0,
 601         .num_chipselect = 1,
 602 };
 603
 604 #define AACI_IRQ        { IRQ_AACI }
 605 #define MMCI0_IRQ       { IRQ_MMCI0A,IRQ_SIC_MMCI0B }
 606 #define KMI0_IRQ        { IRQ_SIC_KMI0 }
 607 #define KMI1_IRQ        { IRQ_SIC_KMI1 }
 608
 609 /*
 610  * These devices are connected directly to the multi-layer AHB switch
 611  */
 612 #define SMC_IRQ         { }
 613 #define MPMC_IRQ        { }
 614 #define CLCD_IRQ        { IRQ_CLCDINT }
 615 #define DMAC_IRQ        { IRQ_DMAINT }
 616
 617 /*
 618  * These devices are connected via the core APB bridge
 619  */
 620 #define SCTL_IRQ        { }
 621 #define WATCHDOG_IRQ    { IRQ_WDOGINT }
 622 #define GPIO0_IRQ       { IRQ_GPIOINT0 }
 623 #define GPIO1_IRQ       { IRQ_GPIOINT1 }
 624 #define GPIO2_IRQ       { IRQ_GPIOINT2 }
 625 #define GPIO3_IRQ       { IRQ_GPIOINT3 }
 626 #define RTC_IRQ         { IRQ_RTCINT }
 627
 628 /*
 629  * These devices are connected via the DMA APB bridge
 630  */
 631 #define SCI_IRQ         { IRQ_SCIINT }
 632 #define UART0_IRQ       { IRQ_UARTINT0 }
 633 #define UART1_IRQ       { IRQ_UARTINT1 }
 634 #define UART2_IRQ       { IRQ_UARTINT2 }
 635 #define SSP_IRQ         { IRQ_SSPINT }
 636
 637 /* FPGA Primecells */
 638 APB_DEVICE(aaci,  "fpga:04", AACI,     NULL);
 639 APB_DEVICE(mmc0,  "fpga:05", MMCI0,    &mmc0_plat_data);
 640 APB_DEVICE(kmi0,  "fpga:06", KMI0,     NULL);
 641 APB_DEVICE(kmi1,  "fpga:07", KMI1,     NULL);
 642
 643 /* DevChip Primecells */
 644 AHB_DEVICE(smc,   "dev:00",  SMC,      NULL);
 645 AHB_DEVICE(mpmc,  "dev:10",  MPMC,     NULL);
 646 AHB_DEVICE(clcd,  "dev:20",  CLCD,     &clcd_plat_data);
 647 AHB_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
 648 APB_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
 649 APB_DEVICE(wdog,  "dev:e1",  WATCHDOG, NULL);
 650 APB_DEVICE(gpio0, "dev:e4",  GPIO0,    &gpio0_plat_data);
 651 APB_DEVICE(gpio1, "dev:e5",  GPIO1,    &gpio1_plat_data);
 652 APB_DEVICE(gpio2, "dev:e6",  GPIO2,    &gpio2_plat_data);
 653 APB_DEVICE(gpio3, "dev:e7",  GPIO3,    &gpio3_plat_data);
 654 APB_DEVICE(rtc,   "dev:e8",  RTC,      NULL);
 655 APB_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
 656 APB_DEVICE(uart0, "dev:f1",  UART0,    NULL);
 657 APB_DEVICE(uart1, "dev:f2",  UART1,    NULL);
 658 APB_DEVICE(uart2, "dev:f3",  UART2,    NULL);
 659 APB_DEVICE(ssp0,  "dev:f4",  SSP,      &ssp0_plat_data);
 660
 661 static struct amba_device *amba_devs[] __initdata = {
 662         &dmac_device,
 663         &uart0_device,
 664         &uart1_device,
 665         &uart2_device,
 666         &smc_device,
 667         &mpmc_device,
 668         &clcd_device,
 669         &sctl_device,
 670         &wdog_device,
 671         &gpio0_device,
 672         &gpio1_device,
 673         &gpio2_device,
 674         &gpio3_device,
 675         &rtc_device,
 676         &sci0_device,
 677         &ssp0_device,
 678         &aaci_device,
 679         &mmc0_device,
 680         &kmi0_device,
 681         &kmi1_device,
 682 };
 683
 684 #ifdef CONFIG_OF
 685 /*
 686  * Lookup table for attaching a specific name and platform_data pointer to
 687  * devices as they get created by of_platform_populate().  Ideally this table
 688  * would not exist, but the current clock implementation depends on some devices
 689  * having a specific name.
 690  */
 691 struct of_dev_auxdata versatile_auxdata_lookup[] __initdata = {
 692         OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI0_BASE, "fpga:05", &mmc0_plat_data),
 693         OF_DEV_AUXDATA("arm,primecell", VERSATILE_KMI0_BASE, "fpga:06", NULL),
 694         OF_DEV_AUXDATA("arm,primecell", VERSATILE_KMI1_BASE, "fpga:07", NULL),
 695         OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART3_BASE, "fpga:09", NULL),
 696         /* FIXME: this is buggy, the platform data is needed for this MMC instance too */
 697         OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI1_BASE, "fpga:0b", NULL),
 698
 699         OF_DEV_AUXDATA("arm,primecell", VERSATILE_CLCD_BASE, "dev:20", &clcd_plat_data),
 700         OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART0_BASE, "dev:f1", NULL),
 701         OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART1_BASE, "dev:f2", NULL),
 702         OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART2_BASE, "dev:f3", NULL),
 703         OF_DEV_AUXDATA("arm,primecell", VERSATILE_SSP_BASE, "dev:f4", &ssp0_plat_data),
 704
 705 #if 0
 706         /*
 707          * These entries are unnecessary because no clocks referencing
 708          * them.  I've left them in for now as place holders in case
 709          * any of them need to be added back, but they should be
 710          * removed before actually committing this patch.  --gcl
 711          */
 712         OF_DEV_AUXDATA("arm,primecell", VERSATILE_AACI_BASE, "fpga:04", NULL),
 713         OF_DEV_AUXDATA("arm,primecell", VERSATILE_SCI1_BASE, "fpga:0a", NULL),
 714         OF_DEV_AUXDATA("arm,primecell", VERSATILE_SMC_BASE, "dev:00", NULL),
 715         OF_DEV_AUXDATA("arm,primecell", VERSATILE_MPMC_BASE, "dev:10", NULL),
 716         OF_DEV_AUXDATA("arm,primecell", VERSATILE_DMAC_BASE, "dev:30", NULL),
 717
 718         OF_DEV_AUXDATA("arm,primecell", VERSATILE_SCTL_BASE, "dev:e0", NULL),
 719         OF_DEV_AUXDATA("arm,primecell", VERSATILE_WATCHDOG_BASE, "dev:e1", NULL),
 720         OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO0_BASE, "dev:e4", NULL),
 721         OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO1_BASE, "dev:e5", NULL),
 722         OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO2_BASE, "dev:e6", NULL),
 723         OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO3_BASE, "dev:e7", NULL),
 724         OF_DEV_AUXDATA("arm,primecell", VERSATILE_RTC_BASE, "dev:e8", NULL),
 725         OF_DEV_AUXDATA("arm,primecell", VERSATILE_SCI_BASE, "dev:f0", NULL),
 726 #endif
 727         {}
 728 };
 729 #endif
 730
 731 void versatile_restart(enum reboot_mode mode, const char *cmd)
 732 {
 733         void __iomem *sys = __io_address(VERSATILE_SYS_BASE);
 734         u32 val;
 735
 736         val = __raw_readl(sys + VERSATILE_SYS_RESETCTL_OFFSET);
 737         val |= 0x105;
 738
 739         __raw_writel(0xa05f, sys + VERSATILE_SYS_LOCK_OFFSET);
 740         __raw_writel(val, sys + VERSATILE_SYS_RESETCTL_OFFSET);
 741         __raw_writel(0, sys + VERSATILE_SYS_LOCK_OFFSET);
 742 }
 743
 744 /* Early initializations */
 745 void __init versatile_init_early(void)
 746 {
 747         u32 val;
 748         void __iomem *sys = __io_address(VERSATILE_SYS_BASE);
 749
 750         osc4_clk.vcoreg = sys + VERSATILE_SYS_OSCCLCD_OFFSET;
 751         clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 752
 753         versatile_sched_clock_init(sys + VERSATILE_SYS_24MHz_OFFSET, 24000000);
 754
 755         /*
 756          * set clock frequency:
 757          *      VERSATILE_REFCLK is 32KHz
 758          *      VERSATILE_TIMCLK is 1MHz
 759          */
 760         val = readl(__io_address(VERSATILE_SCTL_BASE));
 761         writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) |
 762                (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) |
 763                (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) |
 764                (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val,
 765                __io_address(VERSATILE_SCTL_BASE));
 766 }
 767
 768 void __init versatile_init(void)
 769 {
 770         int i;
 771
 772         platform_device_register(&versatile_flash_device);
 773         platform_device_register(&versatile_i2c_device);
 774         platform_device_register(&smc91x_device);
 775         platform_device_register(&char_lcd_device);
 776         platform_device_register(&leds_device);
 777
 778         for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 779                 struct amba_device *d = amba_devs[i];
 780                 amba_device_register(d, &iomem_resource);
 781         }
 782 }
 783
 784 /*
 785  * Where is the timer (VA)?
 786  */
 787 #define TIMER0_VA_BASE           __io_address(VERSATILE_TIMER0_1_BASE)
 788 #define TIMER1_VA_BASE          (__io_address(VERSATILE_TIMER0_1_BASE) + 0x20)
 789 #define TIMER2_VA_BASE           __io_address(VERSATILE_TIMER2_3_BASE)
 790 #define TIMER3_VA_BASE          (__io_address(VERSATILE_TIMER2_3_BASE) + 0x20)
 791
 792 /*
 793  * Set up timer interrupt, and return the current time in seconds.
 794  */
 795 void __init versatile_timer_init(void)
 796 {
 797
 798         /*
 799          * Initialise to a known state (all timers off)
 800          */
 801         writel(0, TIMER0_VA_BASE + TIMER_CTRL);
 802         writel(0, TIMER1_VA_BASE + TIMER_CTRL);
 803         writel(0, TIMER2_VA_BASE + TIMER_CTRL);
 804         writel(0, TIMER3_VA_BASE + TIMER_CTRL);
 805
 806         sp804_clocksource_init(TIMER3_VA_BASE, "timer3");
 807         sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMERINT0_1, "timer0");
 808 }