kernel/arch/arm/mach-omap2/prm3xxx.c

   1 /*
   2  * OMAP3xxx PRM module functions
   3  *
   4  * Copyright (C) 2010-2012 Texas Instruments, Inc.
   5  * Copyright (C) 2010 Nokia Corporation
   6  * Benoît Cousson
   7  * Paul Walmsley
   8  * Rajendra Nayak <rnayak@ti.com>
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13  */
  14
  15 #include <linux/kernel.h>
  16 #include <linux/errno.h>
  17 #include <linux/err.h>
  18 #include <linux/io.h>
  19 #include <linux/irq.h>
  20 #include <linux/of_irq.h>
  21
  22 #include "soc.h"
  23 #include "common.h"
  24 #include "vp.h"
  25 #include "powerdomain.h"
  26 #include "prm3xxx.h"
  27 #include "prm2xxx_3xxx.h"
  28 #include "cm2xxx_3xxx.h"
  29 #include "prm-regbits-34xx.h"
  30 #include "cm3xxx.h"
  31 #include "cm-regbits-34xx.h"
  32 #include "clock.h"
  33
  34 static void omap3xxx_prm_read_pending_irqs(unsigned long *events);
  35 static void omap3xxx_prm_ocp_barrier(void);
  36 static void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
  37 static void omap3xxx_prm_restore_irqen(u32 *saved_mask);
  38
  39 static const struct omap_prcm_irq omap3_prcm_irqs[] = {
  40         OMAP_PRCM_IRQ("wkup",   0,      0),
  41         OMAP_PRCM_IRQ("io",     9,      1),
  42 };
  43
  44 static struct omap_prcm_irq_setup omap3_prcm_irq_setup = {
  45         .ack                    = OMAP3_PRM_IRQSTATUS_MPU_OFFSET,
  46         .mask                   = OMAP3_PRM_IRQENABLE_MPU_OFFSET,
  47         .nr_regs                = 1,
  48         .irqs                   = omap3_prcm_irqs,
  49         .nr_irqs                = ARRAY_SIZE(omap3_prcm_irqs),
  50         .irq                    = 11 + OMAP_INTC_START,
  51         .read_pending_irqs      = &omap3xxx_prm_read_pending_irqs,
  52         .ocp_barrier            = &omap3xxx_prm_ocp_barrier,
  53         .save_and_clear_irqen   = &omap3xxx_prm_save_and_clear_irqen,
  54         .restore_irqen          = &omap3xxx_prm_restore_irqen,
  55         .reconfigure_io_chain   = NULL,
  56 };
  57
  58 /*
  59  * omap3_prm_reset_src_map - map from bits in the PRM_RSTST hardware
  60  *   register (which are specific to OMAP3xxx SoCs) to reset source ID
  61  *   bit shifts (which is an OMAP SoC-independent enumeration)
  62  */
  63 static struct prm_reset_src_map omap3xxx_prm_reset_src_map[] = {
  64         { OMAP3430_GLOBAL_COLD_RST_SHIFT, OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT },
  65         { OMAP3430_GLOBAL_SW_RST_SHIFT, OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT },
  66         { OMAP3430_SECURITY_VIOL_RST_SHIFT, OMAP_SECU_VIOL_RST_SRC_ID_SHIFT },
  67         { OMAP3430_MPU_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT },
  68         { OMAP3430_SECURE_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT },
  69         { OMAP3430_EXTERNAL_WARM_RST_SHIFT, OMAP_EXTWARM_RST_SRC_ID_SHIFT },
  70         { OMAP3430_VDD1_VOLTAGE_MANAGER_RST_SHIFT,
  71           OMAP_VDD_MPU_VM_RST_SRC_ID_SHIFT },
  72         { OMAP3430_VDD2_VOLTAGE_MANAGER_RST_SHIFT,
  73           OMAP_VDD_CORE_VM_RST_SRC_ID_SHIFT },
  74         { OMAP3430_ICEPICK_RST_SHIFT, OMAP_ICEPICK_RST_SRC_ID_SHIFT },
  75         { OMAP3430_ICECRUSHER_RST_SHIFT, OMAP_ICECRUSHER_RST_SRC_ID_SHIFT },
  76         { -1, -1 },
  77 };
  78
  79 /* PRM VP */
  80
  81 /*
  82  * struct omap3_vp - OMAP3 VP register access description.
  83  * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg
  84  */
  85 struct omap3_vp {
  86         u32 tranxdone_status;
  87 };
  88
  89 static struct omap3_vp omap3_vp[] = {
  90         [OMAP3_VP_VDD_MPU_ID] = {
  91                 .tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK,
  92         },
  93         [OMAP3_VP_VDD_CORE_ID] = {
  94                 .tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK,
  95         },
  96 };
  97
  98 #define MAX_VP_ID ARRAY_SIZE(omap3_vp);
  99
 100 static u32 omap3_prm_vp_check_txdone(u8 vp_id)
 101 {
 102         struct omap3_vp *vp = &omap3_vp[vp_id];
 103         u32 irqstatus;
 104
 105         irqstatus = omap2_prm_read_mod_reg(OCP_MOD,
 106                                            OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 107         return irqstatus & vp->tranxdone_status;
 108 }
 109
 110 static void omap3_prm_vp_clear_txdone(u8 vp_id)
 111 {
 112         struct omap3_vp *vp = &omap3_vp[vp_id];
 113
 114         omap2_prm_write_mod_reg(vp->tranxdone_status,
 115                                 OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 116 }
 117
 118 u32 omap3_prm_vcvp_read(u8 offset)
 119 {
 120         return omap2_prm_read_mod_reg(OMAP3430_GR_MOD, offset);
 121 }
 122
 123 void omap3_prm_vcvp_write(u32 val, u8 offset)
 124 {
 125         omap2_prm_write_mod_reg(val, OMAP3430_GR_MOD, offset);
 126 }
 127
 128 u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
 129 {
 130         return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset);
 131 }
 132
 133 /**
 134  * omap3xxx_prm_dpll3_reset - use DPLL3 reset to reboot the OMAP SoC
 135  *
 136  * Set the DPLL3 reset bit, which should reboot the SoC.  This is the
 137  * recommended way to restart the SoC, considering Errata i520.  No
 138  * return value.
 139  */
 140 static void omap3xxx_prm_dpll3_reset(void)
 141 {
 142         omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, OMAP3430_GR_MOD,
 143                                    OMAP2_RM_RSTCTRL);
 144         /* OCP barrier */
 145         omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP2_RM_RSTCTRL);
 146 }
 147
 148 /**
 149  * omap3xxx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events
 150  * @events: ptr to a u32, preallocated by caller
 151  *
 152  * Read PRM_IRQSTATUS_MPU bits, AND'ed with the currently-enabled PRM
 153  * MPU IRQs, and store the result into the u32 pointed to by @events.
 154  * No return value.
 155  */
 156 static void omap3xxx_prm_read_pending_irqs(unsigned long *events)
 157 {
 158         u32 mask, st;
 159
 160         /* XXX Can the mask read be avoided (e.g., can it come from RAM?) */
 161         mask = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
 162         st = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 163
 164         events[0] = mask & st;
 165 }
 166
 167 /**
 168  * omap3xxx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete
 169  *
 170  * Force any buffered writes to the PRM IP block to complete.  Needed
 171  * by the PRM IRQ handler, which reads and writes directly to the IP
 172  * block, to avoid race conditions after acknowledging or clearing IRQ
 173  * bits.  No return value.
 174  */
 175 static void omap3xxx_prm_ocp_barrier(void)
 176 {
 177         omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
 178 }
 179
 180 /**
 181  * omap3xxx_prm_save_and_clear_irqen - save/clear PRM_IRQENABLE_MPU reg
 182  * @saved_mask: ptr to a u32 array to save IRQENABLE bits
 183  *
 184  * Save the PRM_IRQENABLE_MPU register to @saved_mask.  @saved_mask
 185  * must be allocated by the caller.  Intended to be used in the PRM
 186  * interrupt handler suspend callback.  The OCP barrier is needed to
 187  * ensure the write to disable PRM interrupts reaches the PRM before
 188  * returning; otherwise, spurious interrupts might occur.  No return
 189  * value.
 190  */
 191 static void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask)
 192 {
 193         saved_mask[0] = omap2_prm_read_mod_reg(OCP_MOD,
 194                                                OMAP3_PRM_IRQENABLE_MPU_OFFSET);
 195         omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
 196
 197         /* OCP barrier */
 198         omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
 199 }
 200
 201 /**
 202  * omap3xxx_prm_restore_irqen - set PRM_IRQENABLE_MPU register from args
 203  * @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously
 204  *
 205  * Restore the PRM_IRQENABLE_MPU register from @saved_mask.  Intended
 206  * to be used in the PRM interrupt handler resume callback to restore
 207  * values saved by omap3xxx_prm_save_and_clear_irqen().  No OCP
 208  * barrier should be needed here; any pending PRM interrupts will fire
 209  * once the writes reach the PRM.  No return value.
 210  */
 211 static void omap3xxx_prm_restore_irqen(u32 *saved_mask)
 212 {
 213         omap2_prm_write_mod_reg(saved_mask[0], OCP_MOD,
 214                                 OMAP3_PRM_IRQENABLE_MPU_OFFSET);
 215 }
 216
 217 /**
 218  * omap3xxx_prm_clear_mod_irqs - clear wake-up events from PRCM interrupt
 219  * @module: PRM module to clear wakeups from
 220  * @regs: register set to clear, 1 or 3
 221  * @wkst_mask: wkst bits to clear
 222  *
 223  * The purpose of this function is to clear any wake-up events latched
 224  * in the PRCM PM_WKST_x registers. It is possible that a wake-up event
 225  * may occur whilst attempting to clear a PM_WKST_x register and thus
 226  * set another bit in this register. A while loop is used to ensure
 227  * that any peripheral wake-up events occurring while attempting to
 228  * clear the PM_WKST_x are detected and cleared.
 229  */
 230 static int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
 231 {
 232         u32 wkst, fclk, iclk, clken;
 233         u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
 234         u16 fclk_off = (regs == 3) ? OMAP3430ES2_CM_FCLKEN3 : CM_FCLKEN1;
 235         u16 iclk_off = (regs == 3) ? CM_ICLKEN3 : CM_ICLKEN1;
 236         u16 grpsel_off = (regs == 3) ?
 237                 OMAP3430ES2_PM_MPUGRPSEL3 : OMAP3430_PM_MPUGRPSEL;
 238         int c = 0;
 239
 240         wkst = omap2_prm_read_mod_reg(module, wkst_off);
 241         wkst &= omap2_prm_read_mod_reg(module, grpsel_off);
 242         wkst &= wkst_mask;
 243         if (wkst) {
 244                 iclk = omap2_cm_read_mod_reg(module, iclk_off);
 245                 fclk = omap2_cm_read_mod_reg(module, fclk_off);
 246                 while (wkst) {
 247                         clken = wkst;
 248                         omap2_cm_set_mod_reg_bits(clken, module, iclk_off);
 249                         /*
 250                          * For USBHOST, we don't know whether HOST1 or
 251                          * HOST2 woke us up, so enable both f-clocks
 252                          */
 253                         if (module == OMAP3430ES2_USBHOST_MOD)
 254                                 clken |= 1 << OMAP3430ES2_EN_USBHOST2_SHIFT;
 255                         omap2_cm_set_mod_reg_bits(clken, module, fclk_off);
 256                         omap2_prm_write_mod_reg(wkst, module, wkst_off);
 257                         wkst = omap2_prm_read_mod_reg(module, wkst_off);
 258                         wkst &= wkst_mask;
 259                         c++;
 260                 }
 261                 omap2_cm_write_mod_reg(iclk, module, iclk_off);
 262                 omap2_cm_write_mod_reg(fclk, module, fclk_off);
 263         }
 264
 265         return c;
 266 }
 267
 268 /**
 269  * omap3_prm_reset_modem - toggle reset signal for modem
 270  *
 271  * Toggles the reset signal to modem IP block. Required to allow
 272  * OMAP3430 without stacked modem to idle properly.
 273  */
 274 void __init omap3_prm_reset_modem(void)
 275 {
 276         omap2_prm_write_mod_reg(
 277                 OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK |
 278                 OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST_MASK,
 279                                 CORE_MOD, OMAP2_RM_RSTCTRL);
 280         omap2_prm_write_mod_reg(0, CORE_MOD, OMAP2_RM_RSTCTRL);
 281 }
 282
 283 /**
 284  * omap3_prm_init_pm - initialize PM related registers for PRM
 285  * @has_uart4: SoC has UART4
 286  * @has_iva: SoC has IVA
 287  *
 288  * Initializes PRM registers for PM use. Called from PM init.
 289  */
 290 void __init omap3_prm_init_pm(bool has_uart4, bool has_iva)
 291 {
 292         u32 en_uart4_mask;
 293         u32 grpsel_uart4_mask;
 294
 295         /*
 296          * Enable control of expternal oscillator through
 297          * sys_clkreq. In the long run clock framework should
 298          * take care of this.
 299          */
 300         omap2_prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK,
 301                                    1 << OMAP_AUTOEXTCLKMODE_SHIFT,
 302                                    OMAP3430_GR_MOD,
 303                                    OMAP3_PRM_CLKSRC_CTRL_OFFSET);
 304
 305         /* setup wakup source */
 306         omap2_prm_write_mod_reg(OMAP3430_EN_IO_MASK | OMAP3430_EN_GPIO1_MASK |
 307                                 OMAP3430_EN_GPT1_MASK | OMAP3430_EN_GPT12_MASK,
 308                                 WKUP_MOD, PM_WKEN);
 309         /* No need to write EN_IO, that is always enabled */
 310         omap2_prm_write_mod_reg(OMAP3430_GRPSEL_GPIO1_MASK |
 311                                 OMAP3430_GRPSEL_GPT1_MASK |
 312                                 OMAP3430_GRPSEL_GPT12_MASK,
 313                                 WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
 314
 315         /* Enable PM_WKEN to support DSS LPR */
 316         omap2_prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS_MASK,
 317                                 OMAP3430_DSS_MOD, PM_WKEN);
 318
 319         if (has_uart4) {
 320                 en_uart4_mask = OMAP3630_EN_UART4_MASK;
 321                 grpsel_uart4_mask = OMAP3630_GRPSEL_UART4_MASK;
 322         }
 323
 324         /* Enable wakeups in PER */
 325         omap2_prm_write_mod_reg(en_uart4_mask |
 326                                 OMAP3430_EN_GPIO2_MASK |
 327                                 OMAP3430_EN_GPIO3_MASK |
 328                                 OMAP3430_EN_GPIO4_MASK |
 329                                 OMAP3430_EN_GPIO5_MASK |
 330                                 OMAP3430_EN_GPIO6_MASK |
 331                                 OMAP3430_EN_UART3_MASK |
 332                                 OMAP3430_EN_MCBSP2_MASK |
 333                                 OMAP3430_EN_MCBSP3_MASK |
 334                                 OMAP3430_EN_MCBSP4_MASK,
 335                                 OMAP3430_PER_MOD, PM_WKEN);
 336
 337         /* and allow them to wake up MPU */
 338         omap2_prm_write_mod_reg(grpsel_uart4_mask |
 339                                 OMAP3430_GRPSEL_GPIO2_MASK |
 340                                 OMAP3430_GRPSEL_GPIO3_MASK |
 341                                 OMAP3430_GRPSEL_GPIO4_MASK |
 342                                 OMAP3430_GRPSEL_GPIO5_MASK |
 343                                 OMAP3430_GRPSEL_GPIO6_MASK |
 344                                 OMAP3430_GRPSEL_UART3_MASK |
 345                                 OMAP3430_GRPSEL_MCBSP2_MASK |
 346                                 OMAP3430_GRPSEL_MCBSP3_MASK |
 347                                 OMAP3430_GRPSEL_MCBSP4_MASK,
 348                                 OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
 349
 350         /* Don't attach IVA interrupts */
 351         if (has_iva) {
 352                 omap2_prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
 353                 omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
 354                 omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
 355                 omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD,
 356                                         OMAP3430_PM_IVAGRPSEL);
 357         }
 358
 359         /* Clear any pending 'reset' flags */
 360         omap2_prm_write_mod_reg(0xffffffff, MPU_MOD, OMAP2_RM_RSTST);
 361         omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP2_RM_RSTST);
 362         omap2_prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, OMAP2_RM_RSTST);
 363         omap2_prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, OMAP2_RM_RSTST);
 364         omap2_prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, OMAP2_RM_RSTST);
 365         omap2_prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, OMAP2_RM_RSTST);
 366         omap2_prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD,
 367                                 OMAP2_RM_RSTST);
 368
 369         /* Clear any pending PRCM interrupts */
 370         omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 371
 372         /* We need to idle iva2_pwrdm even on am3703 with no iva2. */
 373         omap3xxx_prm_iva_idle();
 374
 375         omap3_prm_reset_modem();
 376 }
 377
 378 /**
 379  * omap3430_pre_es3_1_reconfigure_io_chain - restart wake-up daisy chain
 380  *
 381  * The ST_IO_CHAIN bit does not exist in 3430 before es3.1. The only
 382  * thing we can do is toggle EN_IO bit for earlier omaps.
 383  */
 384 static void omap3430_pre_es3_1_reconfigure_io_chain(void)
 385 {
 386         omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
 387                                      PM_WKEN);
 388         omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
 389                                    PM_WKEN);
 390         omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN);
 391 }
 392
 393 /**
 394  * omap3_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
 395  *
 396  * Clear any previously-latched I/O wakeup events and ensure that the
 397  * I/O wakeup gates are aligned with the current mux settings.  Works
 398  * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then
 399  * deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit.  No
 400  * return value. These registers are only available in 3430 es3.1 and later.
 401  */
 402 static void omap3_prm_reconfigure_io_chain(void)
 403 {
 404         int i = 0;
 405
 406         omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
 407                                    PM_WKEN);
 408
 409         omap_test_timeout(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) &
 410                           OMAP3430_ST_IO_CHAIN_MASK,
 411                           MAX_IOPAD_LATCH_TIME, i);
 412         if (i == MAX_IOPAD_LATCH_TIME)
 413                 pr_warn("PRM: I/O chain clock line assertion timed out\n");
 414
 415         omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
 416                                      PM_WKEN);
 417
 418         omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, WKUP_MOD,
 419                                    PM_WKST);
 420
 421         omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST);
 422 }
 423
 424 /**
 425  * omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
 426  *
 427  * Activates the I/O wakeup event latches and allows events logged by
 428  * those latches to signal a wakeup event to the PRCM.  For I/O
 429  * wakeups to occur, WAKEUPENABLE bits must be set in the pad mux
 430  * registers, and omap3xxx_prm_reconfigure_io_chain() must be called.
 431  * No return value.
 432  */
 433 static void __init omap3xxx_prm_enable_io_wakeup(void)
 434 {
 435         if (prm_features & PRM_HAS_IO_WAKEUP)
 436                 omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
 437                                            PM_WKEN);
 438 }
 439
 440 /**
 441  * omap3xxx_prm_read_reset_sources - return the last SoC reset source
 442  *
 443  * Return a u32 representing the last reset sources of the SoC.  The
 444  * returned reset source bits are standardized across OMAP SoCs.
 445  */
 446 static u32 omap3xxx_prm_read_reset_sources(void)
 447 {
 448         struct prm_reset_src_map *p;
 449         u32 r = 0;
 450         u32 v;
 451
 452         v = omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST);
 453
 454         p = omap3xxx_prm_reset_src_map;
 455         while (p->reg_shift >= 0 && p->std_shift >= 0) {
 456                 if (v & (1 << p->reg_shift))
 457                         r |= 1 << p->std_shift;
 458                 p++;
 459         }
 460
 461         return r;
 462 }
 463
 464 /**
 465  * omap3xxx_prm_iva_idle - ensure IVA is in idle so it can be put into retention
 466  *
 467  * In cases where IVA2 is activated by bootcode, it may prevent
 468  * full-chip retention or off-mode because it is not idle.  This
 469  * function forces the IVA2 into idle state so it can go
 470  * into retention/off and thus allow full-chip retention/off.
 471  */
 472 void omap3xxx_prm_iva_idle(void)
 473 {
 474         /* ensure IVA2 clock is disabled */
 475         omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
 476
 477         /* if no clock activity, nothing else to do */
 478         if (!(omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) &
 479               OMAP3430_CLKACTIVITY_IVA2_MASK))
 480                 return;
 481
 482         /* Reset IVA2 */
 483         omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
 484                                 OMAP3430_RST2_IVA2_MASK |
 485                                 OMAP3430_RST3_IVA2_MASK,
 486                                 OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
 487
 488         /* Enable IVA2 clock */
 489         omap2_cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK,
 490                                OMAP3430_IVA2_MOD, CM_FCLKEN);
 491
 492         /* Un-reset IVA2 */
 493         omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
 494
 495         /* Disable IVA2 clock */
 496         omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
 497
 498         /* Reset IVA2 */
 499         omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
 500                                 OMAP3430_RST2_IVA2_MASK |
 501                                 OMAP3430_RST3_IVA2_MASK,
 502                                 OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
 503 }
 504
 505 /**
 506  * omap3xxx_prm_clear_global_cold_reset - checks the global cold reset status
 507  *                                        and clears it if asserted
 508  *
 509  * Checks if cold-reset has occurred and clears the status bit if yes. Returns
 510  * 1 if cold-reset has occurred, 0 otherwise.
 511  */
 512 int omap3xxx_prm_clear_global_cold_reset(void)
 513 {
 514         if (omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) &
 515             OMAP3430_GLOBAL_COLD_RST_MASK) {
 516                 omap2_prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK,
 517                                            OMAP3430_GR_MOD,
 518                                            OMAP3_PRM_RSTST_OFFSET);
 519                 return 1;
 520         }
 521
 522         return 0;
 523 }
 524
 525 void omap3_prm_save_scratchpad_contents(u32 *ptr)
 526 {
 527         *ptr++ = omap2_prm_read_mod_reg(OMAP3430_GR_MOD,
 528                                         OMAP3_PRM_CLKSRC_CTRL_OFFSET);
 529
 530         *ptr++ = omap2_prm_read_mod_reg(OMAP3430_GR_MOD,
 531                                         OMAP3_PRM_CLKSEL_OFFSET);
 532 }
 533
 534 /* Powerdomain low-level functions */
 535
 536 static int omap3_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
 537 {
 538         omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
 539                                    (pwrst << OMAP_POWERSTATE_SHIFT),
 540                                    pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
 541         return 0;
 542 }
 543
 544 static int omap3_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
 545 {
 546         return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
 547                                              OMAP2_PM_PWSTCTRL,
 548                                              OMAP_POWERSTATE_MASK);
 549 }
 550
 551 static int omap3_pwrdm_read_pwrst(struct powerdomain *pwrdm)
 552 {
 553         return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
 554                                              OMAP2_PM_PWSTST,
 555                                              OMAP_POWERSTATEST_MASK);
 556 }
 557
 558 /* Applicable only for OMAP3. Not supported on OMAP2 */
 559 static int omap3_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
 560 {
 561         return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
 562                                              OMAP3430_PM_PREPWSTST,
 563                                              OMAP3430_LASTPOWERSTATEENTERED_MASK);
 564 }
 565
 566 static int omap3_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
 567 {
 568         return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
 569                                              OMAP2_PM_PWSTST,
 570                                              OMAP3430_LOGICSTATEST_MASK);
 571 }
 572
 573 static int omap3_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
 574 {
 575         return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
 576                                              OMAP2_PM_PWSTCTRL,
 577                                              OMAP3430_LOGICSTATEST_MASK);
 578 }
 579
 580 static int omap3_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
 581 {
 582         return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
 583                                              OMAP3430_PM_PREPWSTST,
 584                                              OMAP3430_LASTLOGICSTATEENTERED_MASK);
 585 }
 586
 587 static int omap3_get_mem_bank_lastmemst_mask(u8 bank)
 588 {
 589         switch (bank) {
 590         case 0:
 591                 return OMAP3430_LASTMEM1STATEENTERED_MASK;
 592         case 1:
 593                 return OMAP3430_LASTMEM2STATEENTERED_MASK;
 594         case 2:
 595                 return OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK;
 596         case 3:
 597                 return OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK;
 598         default:
 599                 WARN_ON(1); /* should never happen */
 600                 return -EEXIST;
 601         }
 602         return 0;
 603 }
 604
 605 static int omap3_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
 606 {
 607         u32 m;
 608
 609         m = omap3_get_mem_bank_lastmemst_mask(bank);
 610
 611         return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
 612                                 OMAP3430_PM_PREPWSTST, m);
 613 }
 614
 615 static int omap3_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
 616 {
 617         omap2_prm_write_mod_reg(0, pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST);
 618         return 0;
 619 }
 620
 621 static int omap3_pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm)
 622 {
 623         return omap2_prm_rmw_mod_reg_bits(0,
 624                                           1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
 625                                           pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
 626 }
 627
 628 static int omap3_pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm)
 629 {
 630         return omap2_prm_rmw_mod_reg_bits(1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
 631                                           0, pwrdm->prcm_offs,
 632                                           OMAP2_PM_PWSTCTRL);
 633 }
 634
 635 struct pwrdm_ops omap3_pwrdm_operations = {
 636         .pwrdm_set_next_pwrst   = omap3_pwrdm_set_next_pwrst,
 637         .pwrdm_read_next_pwrst  = omap3_pwrdm_read_next_pwrst,
 638         .pwrdm_read_pwrst       = omap3_pwrdm_read_pwrst,
 639         .pwrdm_read_prev_pwrst  = omap3_pwrdm_read_prev_pwrst,
 640         .pwrdm_set_logic_retst  = omap2_pwrdm_set_logic_retst,
 641         .pwrdm_read_logic_pwrst = omap3_pwrdm_read_logic_pwrst,
 642         .pwrdm_read_logic_retst = omap3_pwrdm_read_logic_retst,
 643         .pwrdm_read_prev_logic_pwrst    = omap3_pwrdm_read_prev_logic_pwrst,
 644         .pwrdm_set_mem_onst     = omap2_pwrdm_set_mem_onst,
 645         .pwrdm_set_mem_retst    = omap2_pwrdm_set_mem_retst,
 646         .pwrdm_read_mem_pwrst   = omap2_pwrdm_read_mem_pwrst,
 647         .pwrdm_read_mem_retst   = omap2_pwrdm_read_mem_retst,
 648         .pwrdm_read_prev_mem_pwrst      = omap3_pwrdm_read_prev_mem_pwrst,
 649         .pwrdm_clear_all_prev_pwrst     = omap3_pwrdm_clear_all_prev_pwrst,
 650         .pwrdm_enable_hdwr_sar  = omap3_pwrdm_enable_hdwr_sar,
 651         .pwrdm_disable_hdwr_sar = omap3_pwrdm_disable_hdwr_sar,
 652         .pwrdm_wait_transition  = omap2_pwrdm_wait_transition,
 653 };
 654
 655 /*
 656  *
 657  */
 658
 659 static int omap3xxx_prm_late_init(void);
 660
 661 static struct prm_ll_data omap3xxx_prm_ll_data = {
 662         .read_reset_sources = &omap3xxx_prm_read_reset_sources,
 663         .late_init = &omap3xxx_prm_late_init,
 664         .assert_hardreset = &omap2_prm_assert_hardreset,
 665         .deassert_hardreset = &omap2_prm_deassert_hardreset,
 666         .is_hardreset_asserted = &omap2_prm_is_hardreset_asserted,
 667         .reset_system = &omap3xxx_prm_dpll3_reset,
 668         .clear_mod_irqs = &omap3xxx_prm_clear_mod_irqs,
 669         .vp_check_txdone = &omap3_prm_vp_check_txdone,
 670         .vp_clear_txdone = &omap3_prm_vp_clear_txdone,
 671 };
 672
 673 int __init omap3xxx_prm_init(const struct omap_prcm_init_data *data)
 674 {
 675         omap2_clk_legacy_provider_init(TI_CLKM_PRM,
 676                                        prm_base + OMAP3430_IVA2_MOD);
 677         if (omap3_has_io_wakeup())
 678                 prm_features |= PRM_HAS_IO_WAKEUP;
 679
 680         return prm_register(&omap3xxx_prm_ll_data);
 681 }
 682
 683 static const struct of_device_id omap3_prm_dt_match_table[] = {
 684         { .compatible = "ti,omap3-prm" },
 685         { }
 686 };
 687
 688 static int omap3xxx_prm_late_init(void)
 689 {
 690         int ret;
 691
 692         if (!(prm_features & PRM_HAS_IO_WAKEUP))
 693                 return 0;
 694
 695         if (omap3_has_io_chain_ctrl())
 696                 omap3_prcm_irq_setup.reconfigure_io_chain =
 697                         omap3_prm_reconfigure_io_chain;
 698         else
 699                 omap3_prcm_irq_setup.reconfigure_io_chain =
 700                         omap3430_pre_es3_1_reconfigure_io_chain;
 701
 702         if (of_have_populated_dt()) {
 703                 struct device_node *np;
 704                 int irq_num;
 705
 706                 np = of_find_matching_node(NULL, omap3_prm_dt_match_table);
 707                 if (np) {
 708                         irq_num = of_irq_get(np, 0);
 709                         if (irq_num >= 0)
 710                                 omap3_prcm_irq_setup.irq = irq_num;
 711                 }
 712         }
 713
 714         omap3xxx_prm_enable_io_wakeup();
 715         ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
 716         if (!ret)
 717                 irq_set_status_flags(omap_prcm_event_to_irq("io"),
 718                                      IRQ_NOAUTOEN);
 719
 720         return ret;
 721 }
 722
 723 static void __exit omap3xxx_prm_exit(void)
 724 {
 725         prm_unregister(&omap3xxx_prm_ll_data);
 726 }
 727 __exitcall(omap3xxx_prm_exit);