Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / arch / arm / mach-omap1 / i2c.c
1 /*
2  * Helper module for board specific I2C bus registration
3  *
4  * Copyright (C) 2009 Nokia Corporation.
5  *
6  * This program is free software; you can redistribute it and/or
7  * modify it under the terms of the GNU General Public License
8  * version 2 as published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope that it will be useful, but
11  * WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
13  * General Public License for more details.
14  *
15  * You should have received a copy of the GNU General Public License
16  * along with this program; if not, write to the Free Software
17  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
18  * 02110-1301 USA
19  *
20  */
21
22 #include <linux/i2c-omap.h>
23 #include <mach/mux.h>
24 #include "soc.h"
25
26 #include <plat/i2c.h>
27
28 #define OMAP_I2C_SIZE           0x3f
29 #define OMAP1_I2C_BASE          0xfffb3800
30 #define OMAP1_INT_I2C           (32 + 4)
31
32 static const char name[] = "omap_i2c";
33
34 static struct resource i2c_resources[2] = {
35 };
36
37 static struct platform_device omap_i2c_devices[1] = {
38 };
39
40 static void __init omap1_i2c_mux_pins(int bus_id)
41 {
42         if (cpu_is_omap7xx()) {
43                 omap_cfg_reg(I2C_7XX_SDA);
44                 omap_cfg_reg(I2C_7XX_SCL);
45         } else {
46                 omap_cfg_reg(I2C_SDA);
47                 omap_cfg_reg(I2C_SCL);
48         }
49 }
50
51 int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata,
52                                 int bus_id)
53 {
54         struct platform_device *pdev;
55         struct resource *res;
56
57         if (bus_id > 1)
58                 return -EINVAL;
59
60         omap1_i2c_mux_pins(bus_id);
61
62         pdev = &omap_i2c_devices[bus_id - 1];
63         pdev->id = bus_id;
64         pdev->name = name;
65         pdev->num_resources = ARRAY_SIZE(i2c_resources);
66         res = i2c_resources;
67         res[0].start = OMAP1_I2C_BASE;
68         res[0].end = res[0].start + OMAP_I2C_SIZE;
69         res[0].flags = IORESOURCE_MEM;
70         res[1].start = OMAP1_INT_I2C;
71         res[1].flags = IORESOURCE_IRQ;
72         pdev->resource = res;
73
74         /* all OMAP1 have IP version 1 register set */
75         pdata->rev = OMAP_I2C_IP_VERSION_1;
76
77         /* all OMAP1 I2C are implemented like this */
78         pdata->flags = OMAP_I2C_FLAG_NO_FIFO |
79                        OMAP_I2C_FLAG_SIMPLE_CLOCK |
80                        OMAP_I2C_FLAG_16BIT_DATA_REG |
81                        OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK;
82
83         /* how the cpu bus is wired up differs for 7xx only */
84
85         if (cpu_is_omap7xx())
86                 pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1;
87         else
88                 pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2;
89
90         pdev->dev.platform_data = pdata;
91
92         return platform_device_register(pdev);
93 }
94
95 static  int __init omap_i2c_cmdline(void)
96 {
97         return omap_register_i2c_bus_cmdline();
98 }
99 subsys_initcall(omap_i2c_cmdline);