Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / arch / arm / mach-omap1 / fpga.h
1 /*
2  * Interrupt handler for OMAP-1510 FPGA
3  *
4  * Copyright (C) 2001 RidgeRun, Inc.
5  * Author: Greg Lonnon <glonnon@ridgerun.com>
6  *
7  * Copyright (C) 2002 MontaVista Software, Inc.
8  *
9  * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
10  * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
11  *
12  * This program is free software; you can redistribute it and/or modify
13  * it under the terms of the GNU General Public License version 2 as
14  * published by the Free Software Foundation.
15  */
16
17 #ifndef __ASM_ARCH_OMAP_FPGA_H
18 #define __ASM_ARCH_OMAP_FPGA_H
19
20 /*
21  * ---------------------------------------------------------------------------
22  *  H2/P2 Debug board FPGA
23  * ---------------------------------------------------------------------------
24  */
25 /* maps in the FPGA registers and the ETHR registers */
26 #define H2P2_DBG_FPGA_BASE              0xE8000000              /* VA */
27 #define H2P2_DBG_FPGA_SIZE              SZ_4K                   /* SIZE */
28 #define H2P2_DBG_FPGA_START             0x04000000              /* PA */
29
30 #define H2P2_DBG_FPGA_ETHR_START        (H2P2_DBG_FPGA_START + 0x300)
31 #define H2P2_DBG_FPGA_FPGA_REV          IOMEM(H2P2_DBG_FPGA_BASE + 0x10)        /* FPGA Revision */
32 #define H2P2_DBG_FPGA_BOARD_REV         IOMEM(H2P2_DBG_FPGA_BASE + 0x12)        /* Board Revision */
33 #define H2P2_DBG_FPGA_GPIO              IOMEM(H2P2_DBG_FPGA_BASE + 0x14)        /* GPIO outputs */
34 #define H2P2_DBG_FPGA_LEDS              IOMEM(H2P2_DBG_FPGA_BASE + 0x16)        /* LEDs outputs */
35 #define H2P2_DBG_FPGA_MISC_INPUTS       IOMEM(H2P2_DBG_FPGA_BASE + 0x18)        /* Misc inputs */
36 #define H2P2_DBG_FPGA_LAN_STATUS        IOMEM(H2P2_DBG_FPGA_BASE + 0x1A)        /* LAN Status line */
37 #define H2P2_DBG_FPGA_LAN_RESET         IOMEM(H2P2_DBG_FPGA_BASE + 0x1C)        /* LAN Reset line */
38
39 /* LEDs definition on debug board (16 LEDs, all physically green) */
40 #define H2P2_DBG_FPGA_LED_GREEN         (1 << 15)
41 #define H2P2_DBG_FPGA_LED_AMBER         (1 << 14)
42 #define H2P2_DBG_FPGA_LED_RED           (1 << 13)
43 #define H2P2_DBG_FPGA_LED_BLUE          (1 << 12)
44 /*  cpu0 load-meter LEDs */
45 #define H2P2_DBG_FPGA_LOAD_METER        (1 << 0)        // A bit of fun on our board ...
46 #define H2P2_DBG_FPGA_LOAD_METER_SIZE   11
47 #define H2P2_DBG_FPGA_LOAD_METER_MASK   ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
48
49 #define H2P2_DBG_FPGA_P2_LED_TIMER              (1 << 0)
50 #define H2P2_DBG_FPGA_P2_LED_IDLE               (1 << 1)
51
52 #endif