Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / arch / arm / mach-ks8695 / include / mach / regs-uart.h
1 /*
2  * arch/arm/mach-ks8695/include/mach/regs-uart.h
3  *
4  * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
5  * Copyright (C) 2006 Simtec Electronics
6  *
7  * KS8695 - UART register and bit definitions.
8  *
9  * This program is free software; you can redistribute it and/or modify
10  * it under the terms of the GNU General Public License version 2 as
11  * published by the Free Software Foundation.
12  */
13
14 #ifndef KS8695_UART_H
15 #define KS8695_UART_H
16
17 #define KS8695_UART_OFFSET      (0xF0000 + 0xE000)
18 #define KS8695_UART_VA          (KS8695_IO_VA + KS8695_UART_OFFSET)
19 #define KS8695_UART_PA          (KS8695_IO_PA + KS8695_UART_OFFSET)
20
21
22 /*
23  * UART registers
24  */
25 #define KS8695_URRB     (0x00)          /* Receive Buffer Register */
26 #define KS8695_URTH     (0x04)          /* Transmit Holding Register */
27 #define KS8695_URFC     (0x08)          /* FIFO Control Register */
28 #define KS8695_URLC     (0x0C)          /* Line Control Register */
29 #define KS8695_URMC     (0x10)          /* Modem Control Register */
30 #define KS8695_URLS     (0x14)          /* Line Status Register */
31 #define KS8695_URMS     (0x18)          /* Modem Status Register */
32 #define KS8695_URBD     (0x1C)          /* Baud Rate Divisor Register */
33 #define KS8695_USR      (0x20)          /* Status Register */
34
35
36 /* FIFO Control Register */
37 #define URFC_URFRT      (3 << 6)        /* Receive FIFO Trigger Level */
38 #define         URFC_URFRT_1    (0 << 6)
39 #define         URFC_URFRT_4    (1 << 6)
40 #define         URFC_URFRT_8    (2 << 6)
41 #define         URFC_URFRT_14   (3 << 6)
42 #define URFC_URTFR      (1 << 2)        /* Transmit FIFO Reset */
43 #define URFC_URRFR      (1 << 1)        /* Receive FIFO Reset */
44 #define URFC_URFE       (1 << 0)        /* FIFO Enable */
45
46 /* Line Control Register */
47 #define URLC_URSBC      (1 << 6)        /* Set Break Condition */
48 #define URLC_PARITY     (7 << 3)        /* Parity */
49 #define         URPE_NONE       (0 << 3)
50 #define         URPE_ODD        (1 << 3)
51 #define         URPE_EVEN       (3 << 3)
52 #define         URPE_MARK       (5 << 3)
53 #define         URPE_SPACE      (7 << 3)
54 #define URLC_URSB       (1 << 2)        /* Stop Bits */
55 #define URLC_URCL       (3 << 0)        /* Character Length */
56 #define         URCL_5          (0 << 0)
57 #define         URCL_6          (1 << 0)
58 #define         URCL_7          (2 << 0)
59 #define         URCL_8          (3 << 0)
60
61 /* Modem Control Register */
62 #define URMC_URLB       (1 << 4)        /* Loop-back mode */
63 #define URMC_UROUT2     (1 << 3)        /* OUT2 signal */
64 #define URMC_UROUT1     (1 << 2)        /* OUT1 signal */
65 #define URMC_URRTS      (1 << 1)        /* Request to Send */
66 #define URMC_URDTR      (1 << 0)        /* Data Terminal Ready */
67
68 /* Line Status Register */
69 #define URLS_URRFE      (1 << 7)        /* Receive FIFO Error */
70 #define URLS_URTE       (1 << 6)        /* Transmit Empty */
71 #define URLS_URTHRE     (1 << 5)        /* Transmit Holding Register Empty */
72 #define URLS_URBI       (1 << 4)        /* Break Interrupt */
73 #define URLS_URFE       (1 << 3)        /* Framing Error */
74 #define URLS_URPE       (1 << 2)        /* Parity Error */
75 #define URLS_URROE      (1 << 1)        /* Receive Overrun Error */
76 #define URLS_URDR       (1 << 0)        /* Receive Data Ready */
77
78 /* Modem Status Register */
79 #define URMS_URDCD      (1 << 7)        /* Data Carrier Detect */
80 #define URMS_URRI       (1 << 6)        /* Ring Indicator */
81 #define URMS_URDSR      (1 << 5)        /* Data Set Ready */
82 #define URMS_URCTS      (1 << 4)        /* Clear to Send */
83 #define URMS_URDDCD     (1 << 3)        /* Delta Data Carrier Detect */
84 #define URMS_URTERI     (1 << 2)        /* Trailing Edge Ring Indicator */
85 #define URMS_URDDST     (1 << 1)        /* Delta Data Set Ready */
86 #define URMS_URDCTS     (1 << 0)        /* Delta Clear to Send */
87
88 /* Status Register */
89 #define USR_UTI         (1 << 0)        /* Timeout Indication */
90
91
92 #endif