kernel/arch/arm/boot/dts/sun6i-a31.dtsi

   1 /*
   2  * Copyright 2013 Maxime Ripard
   3  *
   4  * Maxime Ripard <maxime.ripard@free-electrons.com>
   5  *
   6  * This file is dual-licensed: you can use it either under the terms
   7  * of the GPL or the X11 license, at your option. Note that this dual
   8  * licensing only applies to this file, and not this project as a
   9  * whole.
  10  *
  11  *  a) This file is free software; you can redistribute it and/or
  12  *     modify it under the terms of the GNU General Public License as
  13  *     published by the Free Software Foundation; either version 2 of the
  14  *     License, or (at your option) any later version.
  15  *
  16  *     This file is distributed in the hope that it will be useful,
  17  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  *     GNU General Public License for more details.
  20  *
  21  *     You should have received a copy of the GNU General Public
  22  *     License along with this file; if not, write to the Free
  23  *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
  24  *     MA 02110-1301 USA
  25  *
  26  * Or, alternatively,
  27  *
  28  *  b) Permission is hereby granted, free of charge, to any person
  29  *     obtaining a copy of this software and associated documentation
  30  *     files (the "Software"), to deal in the Software without
  31  *     restriction, including without limitation the rights to use,
  32  *     copy, modify, merge, publish, distribute, sublicense, and/or
  33  *     sell copies of the Software, and to permit persons to whom the
  34  *     Software is furnished to do so, subject to the following
  35  *     conditions:
  36  *
  37  *     The above copyright notice and this permission notice shall be
  38  *     included in all copies or substantial portions of the Software.
  39  *
  40  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  41  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  42  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  43  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  44  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  45  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  46  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  47  *     OTHER DEALINGS IN THE SOFTWARE.
  48  */
  49
  50 #include "skeleton.dtsi"
  51
  52 #include <dt-bindings/interrupt-controller/arm-gic.h>
  53
  54 #include <dt-bindings/pinctrl/sun4i-a10.h>
  55
  56 / {
  57         interrupt-parent = <&gic>;
  58
  59         aliases {
  60                 ethernet0 = &gmac;
  61         };
  62
  63         chosen {
  64                 #address-cells = <1>;
  65                 #size-cells = <1>;
  66                 ranges;
  67
  68                 framebuffer@0 {
  69                         compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
  70                         allwinner,pipeline = "de_be0-lcd0-hdmi";
  71                         clocks = <&pll6 0>;
  72                         status = "disabled";
  73                 };
  74
  75                 framebuffer@1 {
  76                         compatible = "allwinner,simple-framebuffer",
  77                                      "simple-framebuffer";
  78                         allwinner,pipeline = "de_be0-lcd0";
  79                         clocks = <&pll6 0>;
  80                         status = "disabled";
  81                 };
  82         };
  83
  84         timer {
  85                 compatible = "arm,armv7-timer";
  86                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
  87                              <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
  88                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
  89                              <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
  90                 clock-frequency = <24000000>;
  91                 arm,cpu-registers-not-fw-configured;
  92         };
  93
  94         cpus {
  95                 enable-method = "allwinner,sun6i-a31";
  96                 #address-cells = <1>;
  97                 #size-cells = <0>;
  98
  99                 cpu@0 {
 100                         compatible = "arm,cortex-a7";
 101                         device_type = "cpu";
 102                         reg = <0>;
 103                 };
 104
 105                 cpu@1 {
 106                         compatible = "arm,cortex-a7";
 107                         device_type = "cpu";
 108                         reg = <1>;
 109                 };
 110
 111                 cpu@2 {
 112                         compatible = "arm,cortex-a7";
 113                         device_type = "cpu";
 114                         reg = <2>;
 115                 };
 116
 117                 cpu@3 {
 118                         compatible = "arm,cortex-a7";
 119                         device_type = "cpu";
 120                         reg = <3>;
 121                 };
 122         };
 123
 124         memory {
 125                 reg = <0x40000000 0x80000000>;
 126         };
 127
 128         pmu {
 129                 compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
 130                 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
 131                              <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
 132                              <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
 133                              <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
 134         };
 135
 136         clocks {
 137                 #address-cells = <1>;
 138                 #size-cells = <1>;
 139                 ranges;
 140
 141                 osc24M: osc24M {
 142                         #clock-cells = <0>;
 143                         compatible = "fixed-clock";
 144                         clock-frequency = <24000000>;
 145                 };
 146
 147                 osc32k: clk@0 {
 148                         #clock-cells = <0>;
 149                         compatible = "fixed-clock";
 150                         clock-frequency = <32768>;
 151                         clock-output-names = "osc32k";
 152                 };
 153
 154                 pll1: clk@01c20000 {
 155                         #clock-cells = <0>;
 156                         compatible = "allwinner,sun6i-a31-pll1-clk";
 157                         reg = <0x01c20000 0x4>;
 158                         clocks = <&osc24M>;
 159                         clock-output-names = "pll1";
 160                 };
 161
 162                 pll6: clk@01c20028 {
 163                         #clock-cells = <1>;
 164                         compatible = "allwinner,sun6i-a31-pll6-clk";
 165                         reg = <0x01c20028 0x4>;
 166                         clocks = <&osc24M>;
 167                         clock-output-names = "pll6", "pll6x2";
 168                 };
 169
 170                 cpu: cpu@01c20050 {
 171                         #clock-cells = <0>;
 172                         compatible = "allwinner,sun4i-a10-cpu-clk";
 173                         reg = <0x01c20050 0x4>;
 174
 175                         /*
 176                          * PLL1 is listed twice here.
 177                          * While it looks suspicious, it's actually documented
 178                          * that way both in the datasheet and in the code from
 179                          * Allwinner.
 180                          */
 181                         clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
 182                         clock-output-names = "cpu";
 183                 };
 184
 185                 axi: axi@01c20050 {
 186                         #clock-cells = <0>;
 187                         compatible = "allwinner,sun4i-a10-axi-clk";
 188                         reg = <0x01c20050 0x4>;
 189                         clocks = <&cpu>;
 190                         clock-output-names = "axi";
 191                 };
 192
 193                 ahb1: ahb1@01c20054 {
 194                         #clock-cells = <0>;
 195                         compatible = "allwinner,sun6i-a31-ahb1-clk";
 196                         reg = <0x01c20054 0x4>;
 197                         clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
 198                         clock-output-names = "ahb1";
 199                 };
 200
 201                 ahb1_gates: clk@01c20060 {
 202                         #clock-cells = <1>;
 203                         compatible = "allwinner,sun6i-a31-ahb1-gates-clk";
 204                         reg = <0x01c20060 0x8>;
 205                         clocks = <&ahb1>;
 206                         clock-output-names = "ahb1_mipidsi", "ahb1_ss",
 207                                         "ahb1_dma", "ahb1_mmc0", "ahb1_mmc1",
 208                                         "ahb1_mmc2", "ahb1_mmc3", "ahb1_nand1",
 209                                         "ahb1_nand0", "ahb1_sdram",
 210                                         "ahb1_gmac", "ahb1_ts", "ahb1_hstimer",
 211                                         "ahb1_spi0", "ahb1_spi1", "ahb1_spi2",
 212                                         "ahb1_spi3", "ahb1_otg", "ahb1_ehci0",
 213                                         "ahb1_ehci1", "ahb1_ohci0",
 214                                         "ahb1_ohci1", "ahb1_ohci2", "ahb1_ve",
 215                                         "ahb1_lcd0", "ahb1_lcd1", "ahb1_csi",
 216                                         "ahb1_hdmi", "ahb1_de0", "ahb1_de1",
 217                                         "ahb1_fe0", "ahb1_fe1", "ahb1_mp",
 218                                         "ahb1_gpu", "ahb1_deu0", "ahb1_deu1",
 219                                         "ahb1_drc0", "ahb1_drc1";
 220                 };
 221
 222                 apb1: apb1@01c20054 {
 223                         #clock-cells = <0>;
 224                         compatible = "allwinner,sun4i-a10-apb0-clk";
 225                         reg = <0x01c20054 0x4>;
 226                         clocks = <&ahb1>;
 227                         clock-output-names = "apb1";
 228                 };
 229
 230                 apb1_gates: clk@01c20068 {
 231                         #clock-cells = <1>;
 232                         compatible = "allwinner,sun6i-a31-apb1-gates-clk";
 233                         reg = <0x01c20068 0x4>;
 234                         clocks = <&apb1>;
 235                         clock-output-names = "apb1_codec", "apb1_digital_mic",
 236                                         "apb1_pio", "apb1_daudio0",
 237                                         "apb1_daudio1";
 238                 };
 239
 240                 apb2: clk@01c20058 {
 241                         #clock-cells = <0>;
 242                         compatible = "allwinner,sun4i-a10-apb1-clk";
 243                         reg = <0x01c20058 0x4>;
 244                         clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
 245                         clock-output-names = "apb2";
 246                 };
 247
 248                 apb2_gates: clk@01c2006c {
 249                         #clock-cells = <1>;
 250                         compatible = "allwinner,sun6i-a31-apb2-gates-clk";
 251                         reg = <0x01c2006c 0x4>;
 252                         clocks = <&apb2>;
 253                         clock-output-names = "apb2_i2c0", "apb2_i2c1",
 254                                         "apb2_i2c2", "apb2_i2c3", "apb2_uart0",
 255                                         "apb2_uart1", "apb2_uart2", "apb2_uart3",
 256                                         "apb2_uart4", "apb2_uart5";
 257                 };
 258
 259                 mmc0_clk: clk@01c20088 {
 260                         #clock-cells = <1>;
 261                         compatible = "allwinner,sun4i-a10-mmc-clk";
 262                         reg = <0x01c20088 0x4>;
 263                         clocks = <&osc24M>, <&pll6 0>;
 264                         clock-output-names = "mmc0",
 265                                              "mmc0_output",
 266                                              "mmc0_sample";
 267                 };
 268
 269                 mmc1_clk: clk@01c2008c {
 270                         #clock-cells = <1>;
 271                         compatible = "allwinner,sun4i-a10-mmc-clk";
 272                         reg = <0x01c2008c 0x4>;
 273                         clocks = <&osc24M>, <&pll6 0>;
 274                         clock-output-names = "mmc1",
 275                                              "mmc1_output",
 276                                              "mmc1_sample";
 277                 };
 278
 279                 mmc2_clk: clk@01c20090 {
 280                         #clock-cells = <1>;
 281                         compatible = "allwinner,sun4i-a10-mmc-clk";
 282                         reg = <0x01c20090 0x4>;
 283                         clocks = <&osc24M>, <&pll6 0>;
 284                         clock-output-names = "mmc2",
 285                                              "mmc2_output",
 286                                              "mmc2_sample";
 287                 };
 288
 289                 mmc3_clk: clk@01c20094 {
 290                         #clock-cells = <1>;
 291                         compatible = "allwinner,sun4i-a10-mmc-clk";
 292                         reg = <0x01c20094 0x4>;
 293                         clocks = <&osc24M>, <&pll6 0>;
 294                         clock-output-names = "mmc3",
 295                                              "mmc3_output",
 296                                              "mmc3_sample";
 297                 };
 298
 299                 spi0_clk: clk@01c200a0 {
 300                         #clock-cells = <0>;
 301                         compatible = "allwinner,sun4i-a10-mod0-clk";
 302                         reg = <0x01c200a0 0x4>;
 303                         clocks = <&osc24M>, <&pll6 0>;
 304                         clock-output-names = "spi0";
 305                 };
 306
 307                 spi1_clk: clk@01c200a4 {
 308                         #clock-cells = <0>;
 309                         compatible = "allwinner,sun4i-a10-mod0-clk";
 310                         reg = <0x01c200a4 0x4>;
 311                         clocks = <&osc24M>, <&pll6 0>;
 312                         clock-output-names = "spi1";
 313                 };
 314
 315                 spi2_clk: clk@01c200a8 {
 316                         #clock-cells = <0>;
 317                         compatible = "allwinner,sun4i-a10-mod0-clk";
 318                         reg = <0x01c200a8 0x4>;
 319                         clocks = <&osc24M>, <&pll6 0>;
 320                         clock-output-names = "spi2";
 321                 };
 322
 323                 spi3_clk: clk@01c200ac {
 324                         #clock-cells = <0>;
 325                         compatible = "allwinner,sun4i-a10-mod0-clk";
 326                         reg = <0x01c200ac 0x4>;
 327                         clocks = <&osc24M>, <&pll6 0>;
 328                         clock-output-names = "spi3";
 329                 };
 330
 331                 usb_clk: clk@01c200cc {
 332                         #clock-cells = <1>;
 333                         #reset-cells = <1>;
 334                         compatible = "allwinner,sun6i-a31-usb-clk";
 335                         reg = <0x01c200cc 0x4>;
 336                         clocks = <&osc24M>;
 337                         clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2",
 338                                              "usb_ohci0", "usb_ohci1",
 339                                              "usb_ohci2";
 340                 };
 341
 342                 /*
 343                  * The following two are dummy clocks, placeholders used in the gmac_tx
 344                  * clock. The gmac driver will choose one parent depending on the PHY
 345                  * interface mode, using clk_set_rate auto-reparenting.
 346                  * The actual TX clock rate is not controlled by the gmac_tx clock.
 347                  */
 348                 mii_phy_tx_clk: clk@1 {
 349                         #clock-cells = <0>;
 350                         compatible = "fixed-clock";
 351                         clock-frequency = <25000000>;
 352                         clock-output-names = "mii_phy_tx";
 353                 };
 354
 355                 gmac_int_tx_clk: clk@2 {
 356                         #clock-cells = <0>;
 357                         compatible = "fixed-clock";
 358                         clock-frequency = <125000000>;
 359                         clock-output-names = "gmac_int_tx";
 360                 };
 361
 362                 gmac_tx_clk: clk@01c200d0 {
 363                         #clock-cells = <0>;
 364                         compatible = "allwinner,sun7i-a20-gmac-clk";
 365                         reg = <0x01c200d0 0x4>;
 366                         clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
 367                         clock-output-names = "gmac_tx";
 368                 };
 369         };
 370
 371         soc@01c00000 {
 372                 compatible = "simple-bus";
 373                 #address-cells = <1>;
 374                 #size-cells = <1>;
 375                 ranges;
 376
 377                 dma: dma-controller@01c02000 {
 378                         compatible = "allwinner,sun6i-a31-dma";
 379                         reg = <0x01c02000 0x1000>;
 380                         interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 381                         clocks = <&ahb1_gates 6>;
 382                         resets = <&ahb1_rst 6>;
 383                         #dma-cells = <1>;
 384
 385                         /* DMA controller requires AHB1 clocked from PLL6 */
 386                         assigned-clocks = <&ahb1>;
 387                         assigned-clock-parents = <&pll6 0>;
 388                 };
 389
 390                 mmc0: mmc@01c0f000 {
 391                         compatible = "allwinner,sun5i-a13-mmc";
 392                         reg = <0x01c0f000 0x1000>;
 393                         clocks = <&ahb1_gates 8>,
 394                                  <&mmc0_clk 0>,
 395                                  <&mmc0_clk 1>,
 396                                  <&mmc0_clk 2>;
 397                         clock-names = "ahb",
 398                                       "mmc",
 399                                       "output",
 400                                       "sample";
 401                         resets = <&ahb1_rst 8>;
 402                         reset-names = "ahb";
 403                         interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 404                         status = "disabled";
 405                 };
 406
 407                 mmc1: mmc@01c10000 {
 408                         compatible = "allwinner,sun5i-a13-mmc";
 409                         reg = <0x01c10000 0x1000>;
 410                         clocks = <&ahb1_gates 9>,
 411                                  <&mmc1_clk 0>,
 412                                  <&mmc1_clk 1>,
 413                                  <&mmc1_clk 2>;
 414                         clock-names = "ahb",
 415                                       "mmc",
 416                                       "output",
 417                                       "sample";
 418                         resets = <&ahb1_rst 9>;
 419                         reset-names = "ahb";
 420                         interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 421                         status = "disabled";
 422                 };
 423
 424                 mmc2: mmc@01c11000 {
 425                         compatible = "allwinner,sun5i-a13-mmc";
 426                         reg = <0x01c11000 0x1000>;
 427                         clocks = <&ahb1_gates 10>,
 428                                  <&mmc2_clk 0>,
 429                                  <&mmc2_clk 1>,
 430                                  <&mmc2_clk 2>;
 431                         clock-names = "ahb",
 432                                       "mmc",
 433                                       "output",
 434                                       "sample";
 435                         resets = <&ahb1_rst 10>;
 436                         reset-names = "ahb";
 437                         interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 438                         status = "disabled";
 439                 };
 440
 441                 mmc3: mmc@01c12000 {
 442                         compatible = "allwinner,sun5i-a13-mmc";
 443                         reg = <0x01c12000 0x1000>;
 444                         clocks = <&ahb1_gates 11>,
 445                                  <&mmc3_clk 0>,
 446                                  <&mmc3_clk 1>,
 447                                  <&mmc3_clk 2>;
 448                         clock-names = "ahb",
 449                                       "mmc",
 450                                       "output",
 451                                       "sample";
 452                         resets = <&ahb1_rst 11>;
 453                         reset-names = "ahb";
 454                         interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 455                         status = "disabled";
 456                 };
 457
 458                 usbphy: phy@01c19400 {
 459                         compatible = "allwinner,sun6i-a31-usb-phy";
 460                         reg = <0x01c19400 0x10>,
 461                               <0x01c1a800 0x4>,
 462                               <0x01c1b800 0x4>;
 463                         reg-names = "phy_ctrl",
 464                                     "pmu1",
 465                                     "pmu2";
 466                         clocks = <&usb_clk 8>,
 467                                  <&usb_clk 9>,
 468                                  <&usb_clk 10>;
 469                         clock-names = "usb0_phy",
 470                                       "usb1_phy",
 471                                       "usb2_phy";
 472                         resets = <&usb_clk 0>,
 473                                  <&usb_clk 1>,
 474                                  <&usb_clk 2>;
 475                         reset-names = "usb0_reset",
 476                                       "usb1_reset",
 477                                       "usb2_reset";
 478                         status = "disabled";
 479                         #phy-cells = <1>;
 480                 };
 481
 482                 ehci0: usb@01c1a000 {
 483                         compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
 484                         reg = <0x01c1a000 0x100>;
 485                         interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 486                         clocks = <&ahb1_gates 26>;
 487                         resets = <&ahb1_rst 26>;
 488                         phys = <&usbphy 1>;
 489                         phy-names = "usb";
 490                         status = "disabled";
 491                 };
 492
 493                 ohci0: usb@01c1a400 {
 494                         compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
 495                         reg = <0x01c1a400 0x100>;
 496                         interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 497                         clocks = <&ahb1_gates 29>, <&usb_clk 16>;
 498                         resets = <&ahb1_rst 29>;
 499                         phys = <&usbphy 1>;
 500                         phy-names = "usb";
 501                         status = "disabled";
 502                 };
 503
 504                 ehci1: usb@01c1b000 {
 505                         compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
 506                         reg = <0x01c1b000 0x100>;
 507                         interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 508                         clocks = <&ahb1_gates 27>;
 509                         resets = <&ahb1_rst 27>;
 510                         phys = <&usbphy 2>;
 511                         phy-names = "usb";
 512                         status = "disabled";
 513                 };
 514
 515                 ohci1: usb@01c1b400 {
 516                         compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
 517                         reg = <0x01c1b400 0x100>;
 518                         interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 519                         clocks = <&ahb1_gates 30>, <&usb_clk 17>;
 520                         resets = <&ahb1_rst 30>;
 521                         phys = <&usbphy 2>;
 522                         phy-names = "usb";
 523                         status = "disabled";
 524                 };
 525
 526                 ohci2: usb@01c1c400 {
 527                         compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
 528                         reg = <0x01c1c400 0x100>;
 529                         interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 530                         clocks = <&ahb1_gates 31>, <&usb_clk 18>;
 531                         resets = <&ahb1_rst 31>;
 532                         status = "disabled";
 533                 };
 534
 535                 pio: pinctrl@01c20800 {
 536                         compatible = "allwinner,sun6i-a31-pinctrl";
 537                         reg = <0x01c20800 0x400>;
 538                         interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 539                                      <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
 540                                      <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
 541                                      <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 542                         clocks = <&apb1_gates 5>;
 543                         gpio-controller;
 544                         interrupt-controller;
 545                         #interrupt-cells = <2>;
 546                         #size-cells = <0>;
 547                         #gpio-cells = <3>;
 548
 549                         uart0_pins_a: uart0@0 {
 550                                 allwinner,pins = "PH20", "PH21";
 551                                 allwinner,function = "uart0";
 552                                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 553                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 554                         };
 555
 556                         i2c0_pins_a: i2c0@0 {
 557                                 allwinner,pins = "PH14", "PH15";
 558                                 allwinner,function = "i2c0";
 559                                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 560                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 561                         };
 562
 563                         i2c1_pins_a: i2c1@0 {
 564                                 allwinner,pins = "PH16", "PH17";
 565                                 allwinner,function = "i2c1";
 566                                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 567                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 568                         };
 569
 570                         i2c2_pins_a: i2c2@0 {
 571                                 allwinner,pins = "PH18", "PH19";
 572                                 allwinner,function = "i2c2";
 573                                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 574                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 575                         };
 576
 577                         mmc0_pins_a: mmc0@0 {
 578                                 allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
 579                                 allwinner,function = "mmc0";
 580                                 allwinner,drive = <SUN4I_PINCTRL_30_MA>;
 581                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 582                         };
 583
 584                         gmac_pins_mii_a: gmac_mii@0 {
 585                                 allwinner,pins = "PA0", "PA1", "PA2", "PA3",
 586                                                 "PA8", "PA9", "PA11",
 587                                                 "PA12", "PA13", "PA14", "PA19",
 588                                                 "PA20", "PA21", "PA22", "PA23",
 589                                                 "PA24", "PA26", "PA27";
 590                                 allwinner,function = "gmac";
 591                                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 592                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 593                         };
 594
 595                         gmac_pins_gmii_a: gmac_gmii@0 {
 596                                 allwinner,pins = "PA0", "PA1", "PA2", "PA3",
 597                                                 "PA4", "PA5", "PA6", "PA7",
 598                                                 "PA8", "PA9", "PA10", "PA11",
 599                                                 "PA12", "PA13", "PA14", "PA15",
 600                                                 "PA16", "PA17", "PA18", "PA19",
 601                                                 "PA20", "PA21", "PA22", "PA23",
 602                                                 "PA24", "PA25", "PA26", "PA27";
 603                                 allwinner,function = "gmac";
 604                                 /*
 605                                  * data lines in GMII mode run at 125MHz and
 606                                  * might need a higher signal drive strength
 607                                  */
 608                                 allwinner,drive = <SUN4I_PINCTRL_30_MA>;
 609                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 610                         };
 611
 612                         gmac_pins_rgmii_a: gmac_rgmii@0 {
 613                                 allwinner,pins = "PA0", "PA1", "PA2", "PA3",
 614                                                 "PA9", "PA10", "PA11",
 615                                                 "PA12", "PA13", "PA14", "PA19",
 616                                                 "PA20", "PA25", "PA26", "PA27";
 617                                 allwinner,function = "gmac";
 618                                 /*
 619                                  * data lines in RGMII mode use DDR mode
 620                                  * and need a higher signal drive strength
 621                                  */
 622                                 allwinner,drive = <SUN4I_PINCTRL_40_MA>;
 623                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 624                         };
 625                 };
 626
 627                 ahb1_rst: reset@01c202c0 {
 628                         #reset-cells = <1>;
 629                         compatible = "allwinner,sun6i-a31-ahb1-reset";
 630                         reg = <0x01c202c0 0xc>;
 631                 };
 632
 633                 apb1_rst: reset@01c202d0 {
 634                         #reset-cells = <1>;
 635                         compatible = "allwinner,sun6i-a31-clock-reset";
 636                         reg = <0x01c202d0 0x4>;
 637                 };
 638
 639                 apb2_rst: reset@01c202d8 {
 640                         #reset-cells = <1>;
 641                         compatible = "allwinner,sun6i-a31-clock-reset";
 642                         reg = <0x01c202d8 0x4>;
 643                 };
 644
 645                 timer@01c20c00 {
 646                         compatible = "allwinner,sun4i-a10-timer";
 647                         reg = <0x01c20c00 0xa0>;
 648                         interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
 649                                      <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
 650                                      <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
 651                                      <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
 652                                      <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 653                         clocks = <&osc24M>;
 654                 };
 655
 656                 wdt1: watchdog@01c20ca0 {
 657                         compatible = "allwinner,sun6i-a31-wdt";
 658                         reg = <0x01c20ca0 0x20>;
 659                 };
 660
 661                 rtp: rtp@01c25000 {
 662                         compatible = "allwinner,sun6i-a31-ts";
 663                         reg = <0x01c25000 0x100>;
 664                         interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 665                         #thermal-sensor-cells = <0>;
 666                 };
 667
 668                 uart0: serial@01c28000 {
 669                         compatible = "snps,dw-apb-uart";
 670                         reg = <0x01c28000 0x400>;
 671                         interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 672                         reg-shift = <2>;
 673                         reg-io-width = <4>;
 674                         clocks = <&apb2_gates 16>;
 675                         resets = <&apb2_rst 16>;
 676                         dmas = <&dma 6>, <&dma 6>;
 677                         dma-names = "rx", "tx";
 678                         status = "disabled";
 679                 };
 680
 681                 uart1: serial@01c28400 {
 682                         compatible = "snps,dw-apb-uart";
 683                         reg = <0x01c28400 0x400>;
 684                         interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 685                         reg-shift = <2>;
 686                         reg-io-width = <4>;
 687                         clocks = <&apb2_gates 17>;
 688                         resets = <&apb2_rst 17>;
 689                         dmas = <&dma 7>, <&dma 7>;
 690                         dma-names = "rx", "tx";
 691                         status = "disabled";
 692                 };
 693
 694                 uart2: serial@01c28800 {
 695                         compatible = "snps,dw-apb-uart";
 696                         reg = <0x01c28800 0x400>;
 697                         interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 698                         reg-shift = <2>;
 699                         reg-io-width = <4>;
 700                         clocks = <&apb2_gates 18>;
 701                         resets = <&apb2_rst 18>;
 702                         dmas = <&dma 8>, <&dma 8>;
 703                         dma-names = "rx", "tx";
 704                         status = "disabled";
 705                 };
 706
 707                 uart3: serial@01c28c00 {
 708                         compatible = "snps,dw-apb-uart";
 709                         reg = <0x01c28c00 0x400>;
 710                         interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 711                         reg-shift = <2>;
 712                         reg-io-width = <4>;
 713                         clocks = <&apb2_gates 19>;
 714                         resets = <&apb2_rst 19>;
 715                         dmas = <&dma 9>, <&dma 9>;
 716                         dma-names = "rx", "tx";
 717                         status = "disabled";
 718                 };
 719
 720                 uart4: serial@01c29000 {
 721                         compatible = "snps,dw-apb-uart";
 722                         reg = <0x01c29000 0x400>;
 723                         interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 724                         reg-shift = <2>;
 725                         reg-io-width = <4>;
 726                         clocks = <&apb2_gates 20>;
 727                         resets = <&apb2_rst 20>;
 728                         dmas = <&dma 10>, <&dma 10>;
 729                         dma-names = "rx", "tx";
 730                         status = "disabled";
 731                 };
 732
 733                 uart5: serial@01c29400 {
 734                         compatible = "snps,dw-apb-uart";
 735                         reg = <0x01c29400 0x400>;
 736                         interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 737                         reg-shift = <2>;
 738                         reg-io-width = <4>;
 739                         clocks = <&apb2_gates 21>;
 740                         resets = <&apb2_rst 21>;
 741                         dmas = <&dma 22>, <&dma 22>;
 742                         dma-names = "rx", "tx";
 743                         status = "disabled";
 744                 };
 745
 746                 i2c0: i2c@01c2ac00 {
 747                         compatible = "allwinner,sun6i-a31-i2c";
 748                         reg = <0x01c2ac00 0x400>;
 749                         interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 750                         clocks = <&apb2_gates 0>;
 751                         resets = <&apb2_rst 0>;
 752                         status = "disabled";
 753                         #address-cells = <1>;
 754                         #size-cells = <0>;
 755                 };
 756
 757                 i2c1: i2c@01c2b000 {
 758                         compatible = "allwinner,sun6i-a31-i2c";
 759                         reg = <0x01c2b000 0x400>;
 760                         interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 761                         clocks = <&apb2_gates 1>;
 762                         resets = <&apb2_rst 1>;
 763                         status = "disabled";
 764                         #address-cells = <1>;
 765                         #size-cells = <0>;
 766                 };
 767
 768                 i2c2: i2c@01c2b400 {
 769                         compatible = "allwinner,sun6i-a31-i2c";
 770                         reg = <0x01c2b400 0x400>;
 771                         interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 772                         clocks = <&apb2_gates 2>;
 773                         resets = <&apb2_rst 2>;
 774                         status = "disabled";
 775                         #address-cells = <1>;
 776                         #size-cells = <0>;
 777                 };
 778
 779                 i2c3: i2c@01c2b800 {
 780                         compatible = "allwinner,sun6i-a31-i2c";
 781                         reg = <0x01c2b800 0x400>;
 782                         interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 783                         clocks = <&apb2_gates 3>;
 784                         resets = <&apb2_rst 3>;
 785                         status = "disabled";
 786                         #address-cells = <1>;
 787                         #size-cells = <0>;
 788                 };
 789
 790                 gmac: ethernet@01c30000 {
 791                         compatible = "allwinner,sun7i-a20-gmac";
 792                         reg = <0x01c30000 0x1054>;
 793                         interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 794                         interrupt-names = "macirq";
 795                         clocks = <&ahb1_gates 17>, <&gmac_tx_clk>;
 796                         clock-names = "stmmaceth", "allwinner_gmac_tx";
 797                         resets = <&ahb1_rst 17>;
 798                         reset-names = "stmmaceth";
 799                         snps,pbl = <2>;
 800                         snps,fixed-burst;
 801                         snps,force_sf_dma_mode;
 802                         status = "disabled";
 803                         #address-cells = <1>;
 804                         #size-cells = <0>;
 805                 };
 806
 807                 timer@01c60000 {
 808                         compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer";
 809                         reg = <0x01c60000 0x1000>;
 810                         interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
 811                                      <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
 812                                      <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
 813                                      <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 814                         clocks = <&ahb1_gates 19>;
 815                         resets = <&ahb1_rst 19>;
 816                 };
 817
 818                 spi0: spi@01c68000 {
 819                         compatible = "allwinner,sun6i-a31-spi";
 820                         reg = <0x01c68000 0x1000>;
 821                         interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 822                         clocks = <&ahb1_gates 20>, <&spi0_clk>;
 823                         clock-names = "ahb", "mod";
 824                         dmas = <&dma 23>, <&dma 23>;
 825                         dma-names = "rx", "tx";
 826                         resets = <&ahb1_rst 20>;
 827                         status = "disabled";
 828                 };
 829
 830                 spi1: spi@01c69000 {
 831                         compatible = "allwinner,sun6i-a31-spi";
 832                         reg = <0x01c69000 0x1000>;
 833                         interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 834                         clocks = <&ahb1_gates 21>, <&spi1_clk>;
 835                         clock-names = "ahb", "mod";
 836                         dmas = <&dma 24>, <&dma 24>;
 837                         dma-names = "rx", "tx";
 838                         resets = <&ahb1_rst 21>;
 839                         status = "disabled";
 840                 };
 841
 842                 spi2: spi@01c6a000 {
 843                         compatible = "allwinner,sun6i-a31-spi";
 844                         reg = <0x01c6a000 0x1000>;
 845                         interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 846                         clocks = <&ahb1_gates 22>, <&spi2_clk>;
 847                         clock-names = "ahb", "mod";
 848                         dmas = <&dma 25>, <&dma 25>;
 849                         dma-names = "rx", "tx";
 850                         resets = <&ahb1_rst 22>;
 851                         status = "disabled";
 852                 };
 853
 854                 spi3: spi@01c6b000 {
 855                         compatible = "allwinner,sun6i-a31-spi";
 856                         reg = <0x01c6b000 0x1000>;
 857                         interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 858                         clocks = <&ahb1_gates 23>, <&spi3_clk>;
 859                         clock-names = "ahb", "mod";
 860                         dmas = <&dma 26>, <&dma 26>;
 861                         dma-names = "rx", "tx";
 862                         resets = <&ahb1_rst 23>;
 863                         status = "disabled";
 864                 };
 865
 866                 gic: interrupt-controller@01c81000 {
 867                         compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
 868                         reg = <0x01c81000 0x1000>,
 869                               <0x01c82000 0x1000>,
 870                               <0x01c84000 0x2000>,
 871                               <0x01c86000 0x2000>;
 872                         interrupt-controller;
 873                         #interrupt-cells = <3>;
 874                         interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 875                 };
 876
 877                 rtc: rtc@01f00000 {
 878                         compatible = "allwinner,sun6i-a31-rtc";
 879                         reg = <0x01f00000 0x54>;
 880                         interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
 881                                      <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 882                 };
 883
 884                 nmi_intc: interrupt-controller@01f00c0c {
 885                         compatible = "allwinner,sun6i-a31-sc-nmi";
 886                         interrupt-controller;
 887                         #interrupt-cells = <2>;
 888                         reg = <0x01f00c0c 0x38>;
 889                         interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 890                 };
 891
 892                 prcm@01f01400 {
 893                         compatible = "allwinner,sun6i-a31-prcm";
 894                         reg = <0x01f01400 0x200>;
 895
 896                         ar100: ar100_clk {
 897                                 compatible = "allwinner,sun6i-a31-ar100-clk";
 898                                 #clock-cells = <0>;
 899                                 clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
 900                                 clock-output-names = "ar100";
 901                         };
 902
 903                         ahb0: ahb0_clk {
 904                                 compatible = "fixed-factor-clock";
 905                                 #clock-cells = <0>;
 906                                 clock-div = <1>;
 907                                 clock-mult = <1>;
 908                                 clocks = <&ar100>;
 909                                 clock-output-names = "ahb0";
 910                         };
 911
 912                         apb0: apb0_clk {
 913                                 compatible = "allwinner,sun6i-a31-apb0-clk";
 914                                 #clock-cells = <0>;
 915                                 clocks = <&ahb0>;
 916                                 clock-output-names = "apb0";
 917                         };
 918
 919                         apb0_gates: apb0_gates_clk {
 920                                 compatible = "allwinner,sun6i-a31-apb0-gates-clk";
 921                                 #clock-cells = <1>;
 922                                 clocks = <&apb0>;
 923                                 clock-output-names = "apb0_pio", "apb0_ir",
 924                                                 "apb0_timer", "apb0_p2wi",
 925                                                 "apb0_uart", "apb0_1wire",
 926                                                 "apb0_i2c";
 927                         };
 928
 929                         ir_clk: ir_clk {
 930                                 #clock-cells = <0>;
 931                                 compatible = "allwinner,sun4i-a10-mod0-clk";
 932                                 clocks = <&osc32k>, <&osc24M>;
 933                                 clock-output-names = "ir";
 934                         };
 935
 936                         apb0_rst: apb0_rst {
 937                                 compatible = "allwinner,sun6i-a31-clock-reset";
 938                                 #reset-cells = <1>;
 939                         };
 940                 };
 941
 942                 cpucfg@01f01c00 {
 943                         compatible = "allwinner,sun6i-a31-cpuconfig";
 944                         reg = <0x01f01c00 0x300>;
 945                 };
 946
 947                 ir: ir@01f02000 {
 948                         compatible = "allwinner,sun5i-a13-ir";
 949                         clocks = <&apb0_gates 1>, <&ir_clk>;
 950                         clock-names = "apb", "ir";
 951                         resets = <&apb0_rst 1>;
 952                         interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 953                         reg = <0x01f02000 0x40>;
 954                         status = "disabled";
 955                 };
 956
 957                 r_pio: pinctrl@01f02c00 {
 958                         compatible = "allwinner,sun6i-a31-r-pinctrl";
 959                         reg = <0x01f02c00 0x400>;
 960                         interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
 961                                      <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 962                         clocks = <&apb0_gates 0>;
 963                         resets = <&apb0_rst 0>;
 964                         gpio-controller;
 965                         interrupt-controller;
 966                         #interrupt-cells = <2>;
 967                         #size-cells = <0>;
 968                         #gpio-cells = <3>;
 969
 970                         ir_pins_a: ir@0 {
 971                                 allwinner,pins = "PL4";
 972                                 allwinner,function = "s_ir";
 973                                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 974                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 975                         };
 976                 };
 977         };
 978 };