Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / arch / arm / boot / dts / sun5i-a13-hsg-h702.dts
1 /*
2  * Copyright 2014 Chen-Yu Tsai <wens@csie.org>
3  *
4  * This file is dual-licensed: you can use it either under the terms
5  * of the GPL or the X11 license, at your option. Note that this dual
6  * licensing only applies to this file, and not this project as a
7  * whole.
8  *
9  *  a) This file is free software; you can redistribute it and/or
10  *     modify it under the terms of the GNU General Public License as
11  *     published by the Free Software Foundation; either version 2 of the
12  *     License, or (at your option) any later version.
13  *
14  *     This file is distributed in the hope that it will be useful,
15  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17  *     GNU General Public License for more details.
18  *
19  *     You should have received a copy of the GNU General Public
20  *     License along with this file; if not, write to the Free
21  *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
22  *     MA 02110-1301 USA
23  *
24  * Or, alternatively,
25  *
26  *  b) Permission is hereby granted, free of charge, to any person
27  *     obtaining a copy of this software and associated documentation
28  *     files (the "Software"), to deal in the Software without
29  *     restriction, including without limitation the rights to use,
30  *     copy, modify, merge, publish, distribute, sublicense, and/or
31  *     sell copies of the Software, and to permit persons to whom the
32  *     Software is furnished to do so, subject to the following
33  *     conditions:
34  *
35  *     The above copyright notice and this permission notice shall be
36  *     included in all copies or substantial portions of the Software.
37  *
38  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
39  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
40  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
41  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
42  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
43  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
44  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
45  *     OTHER DEALINGS IN THE SOFTWARE.
46  */
47
48 /dts-v1/;
49 #include "sun5i-a13.dtsi"
50 #include "sunxi-common-regulators.dtsi"
51
52 #include <dt-bindings/gpio/gpio.h>
53 #include <dt-bindings/pinctrl/sun4i-a10.h>
54
55 / {
56         model = "HSG H702";
57         compatible = "hsg,h702", "allwinner,sun5i-a13";
58
59         aliases {
60                 serial0 = &uart1;
61         };
62
63         soc@01c00000 {
64                 mmc0: mmc@01c0f000 {
65                         pinctrl-names = "default";
66                         pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>;
67                         vmmc-supply = <&reg_vcc3v3>;
68                         bus-width = <4>;
69                         cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
70                         cd-inverted;
71                         status = "okay";
72                 };
73
74                 usbphy: phy@01c13400 {
75                         usb1_vbus-supply = <&reg_ldo3>;
76                         status = "okay";
77                 };
78
79                 ehci0: usb@01c14000 {
80                         status = "okay";
81                 };
82
83                 ohci0: usb@01c14400 {
84                         status = "okay";
85                 };
86
87                 pinctrl@01c20800 {
88                         mmc0_cd_pin_h702: mmc0_cd_pin@0 {
89                                 allwinner,pins = "PG0";
90                                 allwinner,function = "gpio_in";
91                                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
92                                 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
93                         };
94                 };
95
96                 uart1: serial@01c28400 {
97                         pinctrl-names = "default";
98                         pinctrl-0 = <&uart1_pins_b>;
99                         status = "okay";
100                 };
101
102                 i2c0: i2c@01c2ac00 {
103                         pinctrl-names = "default";
104                         pinctrl-0 = <&i2c0_pins_a>;
105                         status = "okay";
106
107                         axp209: pmic@34 {
108                                 reg = <0x34>;
109                                 interrupts = <0>;
110                         };
111                 };
112
113                 i2c1: i2c@01c2b000 {
114                         pinctrl-names = "default";
115                         pinctrl-0 = <&i2c1_pins_a>;
116                         status = "okay";
117
118                         pcf8563: rtc@51 {
119                                 compatible = "nxp,pcf8563";
120                                 reg = <0x51>;
121                         };
122                 };
123
124                 i2c2: i2c@01c2b400 {
125                         pinctrl-names = "default";
126                         pinctrl-0 = <&i2c2_pins_a>;
127                         status = "okay";
128                 };
129         };
130 };
131
132 #include "axp209.dtsi"
133
134 &cpu0 {
135         cpu-supply = <&reg_dcdc2>;
136 };
137
138 &reg_dcdc2 {
139         regulator-always-on;
140         regulator-min-microvolt = <1000000>;
141         regulator-max-microvolt = <1500000>;
142         regulator-name = "vdd-cpu";
143 };
144
145 &reg_dcdc3 {
146         regulator-always-on;
147         regulator-min-microvolt = <1000000>;
148         regulator-max-microvolt = <1400000>;
149         regulator-name = "vdd-int-dll";
150 };
151
152 &reg_ldo1 {
153         regulator-name = "vdd-rtc";
154 };
155
156 &reg_ldo2 {
157         regulator-always-on;
158         regulator-min-microvolt = <3000000>;
159         regulator-max-microvolt = <3000000>;
160         regulator-name = "avcc";
161 };
162
163 &reg_ldo3 {
164         regulator-min-microvolt = <3300000>;
165         regulator-max-microvolt = <3300000>;
166         regulator-name = "vcc-wifi";
167 };