kernel/arch/arm/boot/dts/omap3-pandora-common.dtsi

   1 /*
   2  * Copyright (C) 2015
   3  *   Nikolaus Schaller <hns@goldelico.com>
   4  *
   5  * Common device tree include for OpenPandora devices.
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10  */
  11
  12 #include <dt-bindings/input/input.h>
  13
  14 / {
  15         cpus {
  16                 cpu@0 {
  17                         cpu0-supply = <&vcc>;
  18                 };
  19         };
  20
  21         memory {
  22                 device_type = "memory";
  23                 reg = <0x80000000 0x20000000>; /* 512 MB */
  24         };
  25
  26         aliases {
  27                 display0 = &lcd;
  28         };
  29
  30         tv: connector@1 {
  31                 compatible = "connector-analog-tv";
  32                 label = "tv";
  33
  34                 port {
  35                         tv_connector_in: endpoint {
  36                                 remote-endpoint = <&venc_out>;
  37                         };
  38                 };
  39         };
  40
  41         gpio-leds {
  42
  43                 compatible = "gpio-leds";
  44
  45                 pinctrl-names = "default";
  46                 pinctrl-0 = <&led_pins>;
  47
  48                 led@1 {
  49                         label = "pandora::sd1";
  50                         gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;    /* GPIO_128 */
  51                         linux,default-trigger = "mmc0";
  52                         default-state = "off";
  53                 };
  54
  55                 led@2 {
  56                         label = "pandora::sd2";
  57                         gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;    /* GPIO_129 */
  58                         linux,default-trigger = "mmc1";
  59                         default-state = "off";
  60                 };
  61
  62                 led@3 {
  63                         label = "pandora::bluetooth";
  64                         gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;   /* GPIO_158 */
  65                         linux,default-trigger = "heartbeat";
  66                         default-state = "off";
  67                 };
  68
  69                 led@4 {
  70                         label = "pandora::wifi";
  71                         gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;   /* GPIO_159 */
  72                         linux,default-trigger = "mmc2";
  73                         default-state = "off";
  74                 };
  75         };
  76
  77         gpio-keys {
  78                 compatible = "gpio-keys";
  79
  80                 pinctrl-names = "default";
  81                 pinctrl-0 = <&button_pins>;
  82
  83                 up-button {
  84                         label = "up";
  85                         linux,code = <KEY_UP>;
  86                         gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;    /* GPIO_110 */
  87                         gpio-key,wakeup;
  88                 };
  89
  90                 down-button {
  91                         label = "down";
  92                         linux,code = <KEY_DOWN>;
  93                         gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;     /* GPIO_103 */
  94                         gpio-key,wakeup;
  95                 };
  96
  97                 left-button {
  98                         label = "left";
  99                         linux,code = <KEY_LEFT>;
 100                         gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;     /* GPIO_96 */
 101                         gpio-key,wakeup;
 102                 };
 103
 104                 right-button {
 105                         label = "right";
 106                         linux,code = <KEY_RIGHT>;
 107                         gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;     /* GPIO_98 */
 108                         gpio-key,wakeup;
 109                 };
 110
 111                 pageup-button {
 112                         label = "game 1";
 113                         linux,code = <KEY_PAGEUP>;
 114                         gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;    /* GPIO_109 */
 115                         gpio-key,wakeup;
 116                 };
 117
 118                 pagedown-button {
 119                         label = "game 3";
 120                         linux,code = <KEY_PAGEDOWN>;
 121                         gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;    /* GPIO_106 */
 122                         gpio-key,wakeup;
 123                 };
 124
 125                 home-button {
 126                         label = "game 4";
 127                         linux,code = <KEY_HOME>;
 128                         gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;     /* GPIO_101 */
 129                         gpio-key,wakeup;
 130                 };
 131
 132                 end-button {
 133                         label = "game 2";
 134                         linux,code = <KEY_END>;
 135                         gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;    /* GPIO_111 */
 136                         gpio-key,wakeup;
 137                 };
 138
 139                 right-shift {
 140                         label = "l";
 141                         linux,code = <KEY_RIGHTSHIFT>;
 142                         gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;     /* GPIO_102 */
 143                         gpio-key,wakeup;
 144                 };
 145
 146                 kp-plus {
 147                         label = "l2";
 148                         linux,code = <KEY_KPPLUS>;
 149                         gpios = <&gpio4 1 GPIO_ACTIVE_LOW>;     /* GPIO_97 */
 150                         gpio-key,wakeup;
 151                 };
 152
 153                 right-ctrl {
 154                         label = "r";
 155                         linux,code = <KEY_RIGHTCTRL>;
 156                         gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;     /* GPIO_105 */
 157                         gpio-key,wakeup;
 158                 };
 159
 160                 kp-minus {
 161                         label = "r2";
 162                         linux,code = <KEY_KPMINUS>;
 163                         gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;    /* GPIO_107 */
 164                         gpio-key,wakeup;
 165                 };
 166
 167                 left-ctrl {
 168                         label = "ctrl";
 169                         linux,code = <KEY_LEFTCTRL>;
 170                         gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;     /* GPIO_104 */
 171                         gpio-key,wakeup;
 172                 };
 173
 174                 menu {
 175                         label = "menu";
 176                         linux,code = <KEY_MENU>;
 177                         gpios = <&gpio4 3 GPIO_ACTIVE_LOW>;     /* GPIO_99 */
 178                         gpio-key,wakeup;
 179                 };
 180
 181                 hold {
 182                         label = "hold";
 183                         linux,code = <KEY_COFFEE>;
 184                         gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;    /* GPIO_176 */
 185                         gpio-key,wakeup;
 186                 };
 187
 188                 left-alt {
 189                         label = "alt";
 190                         linux,code = <KEY_LEFTALT>;
 191                         gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;    /* GPIO_100 */
 192                         gpio-key,wakeup;
 193                 };
 194
 195                 lid {
 196                         label = "lid";
 197                         linux,code = <0x00>;    /* SW_LID lid shut */
 198                         linux,input-type = <0x05>;    /* EV_SW */
 199                         gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;   /* GPIO_108 */
 200                 };
 201         };
 202 };
 203
 204 &omap3_pmx_core {
 205
 206         mmc1_pins: pinmux_mmc1_pins {
 207                 pinctrl-single,pins = <
 208                         OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_clk.sdmmc1_clk */
 209                         OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_cmd.sdmmc1_cmd */
 210                         OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_dat0.sdmmc1_dat0 */
 211                         OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_dat1.sdmmc1_dat1 */
 212                         OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_dat2.sdmmc1_dat2 */
 213                         OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_dat3.sdmmc1_dat3 */
 214                 >;
 215         };
 216
 217         mmc2_pins: pinmux_mmc2_pins {
 218                 pinctrl-single,pins = <
 219                         OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc2_clk.sdmmc2_clk */
 220                         OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc2_cmd.sdmmc2_cmd */
 221                         OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc2_dat0.sdmmc2_dat0 */
 222                         OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc2_dat1.sdmmc2_dat1 */
 223                         OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc2_dat2.sdmmc2_dat2 */
 224                         OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc2_dat3.sdmmc2_dat3 */
 225                         OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT_PULLUP | MUX_MODE1)        /* sdmmc2_dat4.sdmmc2_dirdat0 */
 226                         OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT_PULLUP | MUX_MODE1)        /* sdmmc2_dat5.sdmmc2_dirdat1 */
 227                         OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT_PULLUP | MUX_MODE1)        /* sdmmc2_dat6.sdmmc2_dircmd */
 228                         OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE1)         /* sdmmc2_dat7.sdmmc2_clkin */
 229                 >;
 230         };
 231
 232         dss_dpi_pins: pinmux_dss_dpi_pins {
 233                 pinctrl-single,pins = <
 234                         OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)       /* dss_pclk.dss_pclk */
 235                         OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)       /* dss_hsync.dss_hsync */
 236                         OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)       /* dss_vsync.dss_vsync */
 237                         OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)       /* dss_acbias.dss_acbias */
 238                         OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)       /* dss_data0.dss_data0 */
 239                         OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)       /* dss_data1.dss_data1 */
 240                         OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)       /* dss_data2.dss_data2 */
 241                         OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)       /* dss_data3.dss_data3 */
 242                         OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)       /* dss_data4.dss_data4 */
 243                         OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)       /* dss_data5.dss_data5 */
 244                         OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)       /* dss_data6.dss_data6 */
 245                         OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)       /* dss_data7.dss_data7 */
 246                         OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)       /* dss_data8.dss_data8 */
 247                         OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)       /* dss_data9.dss_data9 */
 248                         OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)       /* dss_data10.dss_data10 */
 249                         OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)       /* dss_data11.dss_data11 */
 250                         OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)       /* dss_data12.dss_data12 */
 251                         OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)       /* dss_data13.dss_data13 */
 252                         OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)       /* dss_data14.dss_data14 */
 253                         OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)       /* dss_data15.dss_data15 */
 254                         OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)       /* dss_data16.dss_data16 */
 255                         OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)       /* dss_data17.dss_data17 */
 256                         OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)       /* dss_data18.dss_data18 */
 257                         OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)       /* dss_data19.dss_data19 */
 258                         OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)       /* dss_data20.dss_data20 */
 259                         OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)       /* dss_data21.dss_data21 */
 260                         OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)       /* dss_data22.dss_data22 */
 261                         OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)       /* dss_data23.dss_data23 */
 262                         OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4)       /* GPIO_157 = lcd reset */
 263                 >;
 264         };
 265
 266         uart3_pins: pinmux_uart3_pins {
 267                 pinctrl-single,pins = <
 268                         OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
 269                         OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
 270                 >;
 271         };
 272
 273         led_pins: pinmux_leds_pins {
 274                 pinctrl-single,pins = <
 275                         OMAP3_CORE1_IOPAD(0x2154, PIN_OUTPUT | MUX_MODE4)       /* GPIO_128 */
 276                         OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4)       /* GPIO_129 */
 277                         OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE4)       /* GPIO_158 */
 278                         OMAP3_CORE1_IOPAD(0x2192, PIN_OUTPUT | MUX_MODE4)       /* GPIO_159 */
 279                 >;
 280         };
 281
 282         button_pins: pinmux_button_pins {
 283                 pinctrl-single,pins = <
 284                         OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE4)        /* GPIO_96 */
 285                         OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE4)        /* GPIO_97 */
 286                         OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE4)        /* GPIO_98 */
 287                         OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE4)        /* GPIO_99 */
 288                         OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE4)        /* GPIO_100 */
 289                         OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4)        /* GPIO_101 */
 290                         OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE4)        /* GPIO_102 */
 291                         OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE4)        /* GPIO_103 */
 292                         OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE4)        /* GPIO_104 */
 293                         OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE4)        /* GPIO_105 */
 294                         OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE4)        /* GPIO_106 */
 295                         OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE4)        /* GPIO_107 */
 296                         OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE4)        /* GPIO_108 */
 297                         OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4)        /* GPIO_109 */
 298                         OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT | MUX_MODE4)        /* GPIO_110 */
 299                         OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT | MUX_MODE4)        /* GPIO_111 */
 300                         OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4)        /* GPIO_176 */
 301                 >;
 302         };
 303
 304         penirq_pins: pinmux_penirq_pins {
 305                 pinctrl-single,pins = <
 306                         /* here we could enable to wakeup the cpu from suspend by a pen touch */
 307                         OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE4)        /* GPIO_94 */
 308                 >;
 309         };
 310
 311 };
 312
 313 &omap3_pmx_core2 {
 314         /* define in CPU specific file that includes this one
 315          * use either OMAP3430_CORE2_IOPAD() or OMAP3630_CORE2_IOPAD()
 316          */
 317 };
 318
 319 &i2c1 {
 320         clock-frequency = <2600000>;
 321
 322         twl: twl@48 {
 323                 reg = <0x48>;
 324                 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
 325                 interrupt-parent = <&intc>;
 326
 327                 twl_power: power {
 328                         compatible = "ti,twl4030-power-reset";
 329                         ti,use_poweroff;
 330                 };
 331
 332                 twl_audio: audio {
 333                         compatible = "ti,twl4030-audio";
 334
 335                         codec {
 336                                 ti,ramp_delay_value = <3>;
 337                         };
 338                 };
 339         };
 340 };
 341
 342 #include "twl4030.dtsi"
 343 #include "twl4030_omap3.dtsi"
 344
 345 &twl_keypad {
 346         keypad,num-rows = <8>;
 347         keypad,num-columns = <6>;
 348         linux,keymap = <
 349                 MATRIX_KEY(0, 0, KEY_9)
 350                 MATRIX_KEY(0, 1, KEY_8)
 351                 MATRIX_KEY(0, 2, KEY_I)
 352                 MATRIX_KEY(0, 3, KEY_J)
 353                 MATRIX_KEY(0, 4, KEY_N)
 354                 MATRIX_KEY(0, 5, KEY_M)
 355                 MATRIX_KEY(1, 0, KEY_0)
 356                 MATRIX_KEY(1, 1, KEY_7)
 357                 MATRIX_KEY(1, 2, KEY_U)
 358                 MATRIX_KEY(1, 3, KEY_H)
 359                 MATRIX_KEY(1, 4, KEY_B)
 360                 MATRIX_KEY(1, 5, KEY_SPACE)
 361                 MATRIX_KEY(2, 0, KEY_BACKSPACE)
 362                 MATRIX_KEY(2, 1, KEY_6)
 363                 MATRIX_KEY(2, 2, KEY_Y)
 364                 MATRIX_KEY(2, 3, KEY_G)
 365                 MATRIX_KEY(2, 4, KEY_V)
 366                 MATRIX_KEY(2, 5, KEY_FN)
 367                 MATRIX_KEY(3, 0, KEY_O)
 368                 MATRIX_KEY(3, 1, KEY_5)
 369                 MATRIX_KEY(3, 2, KEY_T)
 370                 MATRIX_KEY(3, 3, KEY_F)
 371                 MATRIX_KEY(3, 4, KEY_C)
 372                 MATRIX_KEY(4, 0, KEY_P)
 373                 MATRIX_KEY(4, 1, KEY_4)
 374                 MATRIX_KEY(4, 2, KEY_R)
 375                 MATRIX_KEY(4, 3, KEY_D)
 376                 MATRIX_KEY(4, 4, KEY_X)
 377                 MATRIX_KEY(5, 0, KEY_K)
 378                 MATRIX_KEY(5, 1, KEY_3)
 379                 MATRIX_KEY(5, 2, KEY_E)
 380                 MATRIX_KEY(5, 3, KEY_S)
 381                 MATRIX_KEY(5, 4, KEY_Z)
 382                 MATRIX_KEY(6, 0, KEY_L)
 383                 MATRIX_KEY(6, 1, KEY_2)
 384                 MATRIX_KEY(6, 2, KEY_W)
 385                 MATRIX_KEY(6, 3, KEY_A)
 386                 MATRIX_KEY(6, 4, KEY_RIGHTBRACE)
 387                 MATRIX_KEY(7, 0, KEY_ENTER)
 388                 MATRIX_KEY(7, 1, KEY_1)
 389                 MATRIX_KEY(7, 2, KEY_Q)
 390                 MATRIX_KEY(7, 3, KEY_LEFTSHIFT)
 391                 MATRIX_KEY(7, 4, KEY_LEFTBRACE )
 392          >;
 393 };
 394
 395 /* backup battery charger */
 396 &charger {
 397         ti,bb-uvolt = <3200000>;
 398         ti,bb-uamp = <150>;
 399 };
 400
 401 /* MMC2 */
 402 &vmmc2 {
 403         regulator-min-microvolt = <1850000>;
 404         regulator-max-microvolt = <3150000>;
 405 };
 406
 407 /* LCD */
 408 &vaux1 {
 409         regulator-min-microvolt = <3000000>;
 410         regulator-max-microvolt = <3000000>;
 411 };
 412
 413 /* USB Host PHY */
 414 &vaux2 {
 415         regulator-min-microvolt = <1800000>;
 416         regulator-max-microvolt = <1800000>;
 417 };
 418
 419 /* available on expansion connector */
 420 &vaux3 {
 421         regulator-min-microvolt = <2800000>;
 422         regulator-max-microvolt = <2800000>;
 423 };
 424
 425 /* ADS7846 and nubs */
 426 &vaux4 {
 427         regulator-min-microvolt = <2800000>;
 428         regulator-max-microvolt = <2800000>;
 429 };
 430
 431 /* power audio DAC and LID sensor */
 432 &vsim {
 433         regulator-min-microvolt = <2800000>;
 434         regulator-max-microvolt = <2800000>;
 435         regulator-always-on;
 436 };
 437
 438 &i2c2 {
 439         clock-frequency = <100000>;
 440         /* no clients so we should disable clock */
 441 };
 442
 443 &i2c3 {
 444         clock-frequency = <100000>;
 445
 446         bq27500@55 {
 447                 compatible = "ti,bq27500";
 448                 reg = <0x55>;
 449         };
 450
 451 };
 452
 453 &usb_otg_hs {
 454         interface-type = <0>;
 455         usb-phy = <&usb2_phy>;
 456         phys = <&usb2_phy>;
 457         phy-names = "usb2-phy";
 458         mode = <3>;
 459         power = <50>;
 460 };
 461
 462 &mmc1 {
 463         pinctrl-names = "default";
 464         pinctrl-0 = <&mmc1_pins>;
 465         vmmc-supply = <&vmmc1>;
 466         bus-width = <4>;
 467         cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
 468         wp-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>; /* GPIO_126 */
 469 };
 470
 471 &mmc2 {
 472         pinctrl-names = "default";
 473         pinctrl-0 = <&mmc2_pins>;
 474         vmmc-supply = <&vmmc2>;
 475         bus-width = <4>;
 476         cd-gpios = <&twl_gpio 1 GPIO_ACTIVE_HIGH>;
 477         wp-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* GPIO_127 */
 478 };
 479
 480 /* bluetooth*/
 481 &uart1 {
 482 };
 483
 484 /* spare (expansion connector) */
 485 &uart2 {
 486 };
 487
 488 /* console (expansion connector) */
 489 &uart3 {
 490         pinctrl-names = "default";
 491         pinctrl-0 = <&uart3_pins>;
 492         interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
 493 };
 494
 495 &usbhshost {
 496         port2-mode = "ehci-phy";
 497 };
 498
 499 &gpmc {
 500         ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
 501
 502         nand@0,0 {
 503                 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
 504                 nand-bus-width = <16>;
 505                 ti,nand-ecc-opt = "sw";
 506
 507                 gpmc,sync-clk-ps = <0>;
 508                 gpmc,cs-on-ns = <0>;
 509                 gpmc,cs-rd-off-ns = <44>;
 510                 gpmc,cs-wr-off-ns = <44>;
 511                 gpmc,adv-on-ns = <6>;
 512                 gpmc,adv-rd-off-ns = <34>;
 513                 gpmc,adv-wr-off-ns = <44>;
 514                 gpmc,we-off-ns = <40>;
 515                 gpmc,oe-off-ns = <54>;
 516                 gpmc,access-ns = <64>;
 517                 gpmc,rd-cycle-ns = <82>;
 518                 gpmc,wr-cycle-ns = <82>;
 519                 gpmc,wr-access-ns = <40>;
 520                 gpmc,wr-data-mux-bus-ns = <0>;
 521                 gpmc,device-width = <2>;
 522
 523                 #address-cells = <1>;
 524                 #size-cells = <1>;
 525
 526                 /* u-boot uses mtdparts=nand:512k(xloader),1920k(uboot),128k(uboot-env),10m(boot),-(rootfs) */
 527
 528                 x-loader@0 {
 529                         label = "xloader";
 530                         reg = <0 0x80000>;
 531                 };
 532
 533                 bootloaders@80000 {
 534                         label = "uboot";
 535                         reg = <0x80000 0x1e0000>;
 536                 };
 537
 538                 bootloaders_env@260000 {
 539                         label = "uboot-env";
 540                         reg = <0x260000 0x20000>;
 541                 };
 542
 543                 kernel@280000 {
 544                         label = "boot";
 545                         reg = <0x280000 0xa00000>;
 546                 };
 547
 548                 filesystem@680000 {
 549                         label = "rootfs";
 550                         reg = <0xc80000 0>;     /* 0 = MTDPART_SIZ_FULL */
 551                 };
 552         };
 553 };
 554
 555 &mcspi1 {
 556         tsc2046@0 {
 557                 reg = <0>;      /* CS0 */
 558                 compatible = "ti,tsc2046";
 559                 spi-max-frequency = <1000000>;
 560                 pinctrl-names = "default";
 561                 pinctrl-0 = <&penirq_pins>;
 562                 interrupt-parent = <&gpio3>;
 563                 interrupts = <30 0>;    /* GPIO_94 */
 564                 pendown-gpio = <&gpio3 30 0>;
 565                 vcc-supply = <&vaux4>;
 566
 567                 ti,x-min = /bits/ 16 <0>;
 568                 ti,x-max = /bits/ 16 <8000>;
 569                 ti,y-min = /bits/ 16 <0>;
 570                 ti,y-max = /bits/ 16 <4800>;
 571                 ti,x-plate-ohms = /bits/ 16 <40>;
 572                 ti,pressure-max = /bits/ 16 <255>;
 573
 574                 linux,wakeup;
 575         };
 576
 577         lcd: lcd@1 {
 578                 reg = <1>;      /* CS1 */
 579                 compatible =    "omapdss,tpo,td043mtea1";
 580                 spi-max-frequency = <100000>;
 581                 spi-cpol;
 582                 spi-cpha;
 583
 584                 label = "lcd";
 585                 reset-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;      /* GPIO_157 */
 586                 vcc-supply = <&vaux1>;
 587
 588                 port {
 589                         lcd_in: endpoint {
 590                                 remote-endpoint = <&dpi_out>;
 591                         };
 592                 };
 593         };
 594
 595
 596 };
 597
 598 /* n/a - used as GPIOs */
 599 &mcbsp1 {
 600 };
 601
 602 /* audio DAC */
 603 &mcbsp2 {
 604 };
 605
 606 /* bluetooth */
 607 &mcbsp3 {
 608 };
 609
 610 /* to twl4030*/
 611 &mcbsp4 {
 612 };
 613
 614 &venc {
 615         status = "ok";
 616
 617         vdda-supply = <&vdac>;
 618
 619         port {
 620                 venc_out: endpoint {
 621                         remote-endpoint = <&tv_connector_in>;
 622                         ti,channels = <2>;
 623                 };
 624         };
 625 };
 626
 627 &dss {
 628         pinctrl-names = "default";
 629         pinctrl-0 = < &dss_dpi_pins >;
 630
 631         status = "ok";
 632         vdds_dsi-supply = <&vpll2>;
 633
 634         port {
 635                 dpi_out: endpoint {
 636                         remote-endpoint = <&lcd_in>;
 637                         data-lines = <24>;
 638                 };
 639         };
 640 };