kernel/arch/arm/boot/dts/omap3-gta04.dtsi

   1 /*
   2  * Copyright (C) 2013 Marek Belisko <marek@goldelico.com>
   3  *
   4  * Based on omap3-beagle-xm.dts
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  */
  10 /dts-v1/;
  11
  12 #include "omap36xx.dtsi"
  13
  14 / {
  15         model = "OMAP3 GTA04";
  16         compatible = "ti,omap3-gta04", "ti,omap36xx", "ti,omap3";
  17
  18         cpus {
  19                 cpu@0 {
  20                         cpu0-supply = <&vcc>;
  21                 };
  22         };
  23
  24         memory {
  25                 device_type = "memory";
  26                 reg = <0x80000000 0x20000000>; /* 512 MB */
  27         };
  28
  29         aliases {
  30                 display0 = &lcd;
  31         };
  32
  33         gpio-keys {
  34                 compatible = "gpio-keys";
  35
  36                 aux-button {
  37                         label = "aux";
  38                         linux,code = <169>;
  39                         gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
  40                         gpio-key,wakeup;
  41                 };
  42         };
  43
  44         sound {
  45                 compatible = "ti,omap-twl4030";
  46                 ti,model = "gta04";
  47
  48                 ti,mcbsp = <&mcbsp2>;
  49         };
  50
  51         spi_lcd {
  52                 compatible = "spi-gpio";
  53                 #address-cells = <0x1>;
  54                 #size-cells = <0x0>;
  55                 pinctrl-names = "default";
  56                 pinctrl-0 = <&spi_gpio_pins>;
  57
  58                 gpio-sck = <&gpio1 12 0>;
  59                 gpio-miso = <&gpio1 18 0>;
  60                 gpio-mosi = <&gpio1 20 0>;
  61                 cs-gpios = <&gpio1 19 0>;
  62                 num-chipselects = <1>;
  63
  64                 /* lcd panel */
  65                 lcd: td028ttec1@0 {
  66                         compatible = "toppoly,td028ttec1";
  67                         reg = <0>;
  68                         spi-max-frequency = <100000>;
  69                         spi-cpol;
  70                         spi-cpha;
  71
  72                         label = "lcd";
  73                         port {
  74                                 lcd_in: endpoint {
  75                                         remote-endpoint = <&dpi_out>;
  76                                 };
  77                         };
  78                 };
  79         };
  80
  81         hsusb2_phy: hsusb2_phy {
  82                 compatible = "usb-nop-xceiv";
  83                 reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
  84         };
  85
  86         tv0: connector@1 {
  87                 compatible = "svideo-connector";
  88                 label = "tv";
  89
  90                 port {
  91                         tv_connector_in: endpoint {
  92                                 remote-endpoint = <&opa_out>;
  93                         };
  94                 };
  95         };
  96
  97         tv_amp: opa362 {
  98                 compatible = "ti,opa362";
  99                 enable-gpios = <&gpio1 23 0>;
 100
 101                 ports {
 102                         #address-cells = <1>;
 103                         #size-cells = <0>;
 104
 105                         port@0 {
 106                                 reg = <0>;
 107                                 opa_in: endpoint@0 {
 108                                         remote-endpoint = <&venc_out>;
 109                                 };
 110                         };
 111
 112                         port@1 {
 113                                 reg = <1>;
 114                                 opa_out: endpoint@0 {
 115                                         remote-endpoint = <&tv_connector_in>;
 116                                 };
 117                         };
 118                 };
 119         };
 120 };
 121
 122 &omap3_pmx_core {
 123         pinctrl-names = "default";
 124         pinctrl-0 = <
 125                         &hsusb2_pins
 126         >;
 127
 128         hsusb2_pins: pinmux_hsusb2_pins {
 129                 pinctrl-single,pins = <
 130                         OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi1_cs3.hsusb2_data2 */
 131                         OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_clk.hsusb2_data7 */
 132                         OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_simo.hsusb2_data4 */
 133                         OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_somi.hsusb2_data5 */
 134                         OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_cs0.hsusb2_data6 */
 135                         OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_cs1.hsusb2_data3 */
 136                 >;
 137         };
 138
 139         uart1_pins: pinmux_uart1_pins {
 140                 pinctrl-single,pins = <
 141                         OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0)                /* uart1_rx.uart1_rx */
 142                         OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)               /* uart1_tx.uart1_tx */
 143                 >;
 144         };
 145
 146         uart2_pins: pinmux_uart2_pins {
 147                 pinctrl-single,pins = <
 148                         OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)                /* uart2_rx.uart2_rx */
 149                         OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)               /* uart2_tx.uart2_tx */
 150                 >;
 151         };
 152
 153         uart3_pins: pinmux_uart3_pins {
 154                 pinctrl-single,pins = <
 155                         OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)                /* uart3_rx.uart3_rx */
 156                         OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)               /* uart3_tx.uart3_tx */
 157                 >;
 158         };
 159
 160         mmc1_pins: pinmux_mmc1_pins {
 161                 pinctrl-single,pins = <
 162                         OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_clk.sdmmc1_clk */
 163                         OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_cmd.sdmmc1_cmd */
 164                         OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_dat0.sdmmc1_dat0 */
 165                         OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_dat1.sdmmc1_dat1 */
 166                         OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_dat2.sdmmc1_dat2 */
 167                         OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_dat3.sdmmc1_dat3 */
 168                 >;
 169         };
 170
 171         dss_dpi_pins: pinmux_dss_dpi_pins {
 172                pinctrl-single,pins = <
 173                         OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
 174                         OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
 175                         OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
 176                         OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
 177                         OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
 178                         OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
 179                         OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
 180                         OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
 181                         OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
 182                         OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
 183                         OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
 184                         OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
 185                         OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
 186                         OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
 187                         OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
 188                         OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
 189                         OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
 190                         OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
 191                         OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
 192                         OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
 193                         OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
 194                         OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
 195                         OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
 196                         OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
 197                         OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
 198                         OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
 199                         OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
 200                         OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
 201                 >;
 202        };
 203 };
 204
 205 &omap3_pmx_core2 {
 206         pinctrl-names = "default";
 207         pinctrl-0 = <
 208                         &hsusb2_2_pins
 209         >;
 210
 211         hsusb2_2_pins: pinmux_hsusb2_2_pins {
 212                 pinctrl-single,pins = <
 213                         OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
 214                         OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
 215                         OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
 216                         OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
 217                         OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
 218                         OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
 219                 >;
 220         };
 221
 222         spi_gpio_pins: spi_gpio_pinmux {
 223                 pinctrl-single,pins = <
 224                         OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE4) /* clk */
 225                         OMAP3630_CORE2_IOPAD(0x25e6, PIN_OUTPUT | MUX_MODE4) /* cs */
 226                         OMAP3630_CORE2_IOPAD(0x25e8, PIN_OUTPUT | MUX_MODE4) /* tx */
 227                         OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE4) /* rx */
 228                 >;
 229         };
 230 };
 231
 232 &i2c1 {
 233         clock-frequency = <2600000>;
 234
 235         twl: twl@48 {
 236                 reg = <0x48>;
 237                 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
 238                 interrupt-parent = <&intc>;
 239
 240                 twl_audio: audio {
 241                         compatible = "ti,twl4030-audio";
 242                         ti,enable-vibra = <1>;
 243                         codec {
 244                                 ti,ramp_delay_value = <3>;
 245                         };
 246                 };
 247
 248                 twl_power: power {
 249                         compatible = "ti,twl4030-power";
 250                         ti,use_poweroff;
 251                 };
 252         };
 253 };
 254
 255 #include "twl4030.dtsi"
 256 #include "twl4030_omap3.dtsi"
 257
 258 &i2c2 {
 259         clock-frequency = <400000>;
 260
 261         /* pressure sensor */
 262         bmp085@77 {
 263                 compatible = "bosch,bmp085";
 264                 reg = <0x77>;
 265                 interrupt-parent = <&gpio4>;
 266                 interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */
 267         };
 268
 269         /* accelerometer */
 270         bma180@41 {
 271                 compatible = "bosch,bma180";
 272                 reg = <0x41>;
 273                 interrupt-parent = <&gpio4>;
 274                 interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */
 275         };
 276
 277         /* gyroscope */
 278         itg3200@68 {
 279                 compatible = "invensense,itg3200";
 280                 reg = <0x68>;
 281                 interrupt-parent = <&gpio2>;
 282                 interrupts = <24 0>; /* GPIO_56 */
 283         };
 284
 285         /* leds */
 286         tca6507@45 {
 287                 compatible = "ti,tca6507";
 288                 #address-cells = <1>;
 289                 #size-cells = <0>;
 290                 reg = <0x45>;
 291
 292                 gpio-controller;
 293                 #gpio-cells = <2>;
 294
 295                 gta04_led0: red_aux@0 {
 296                         label = "gta04:red:aux";
 297                         reg = <0x0>;
 298                 };
 299
 300                 gta04_led1: green_aux@1 {
 301                         label = "gta04:green:aux";
 302                         reg = <0x1>;
 303                 };
 304
 305                 gta04_led3: red_power@3 {
 306                         label = "gta04:red:power";
 307                         reg = <0x3>;
 308                         linux,default-trigger = "default-on";
 309                 };
 310
 311                 gta04_led4: green_power@4 {
 312                         label = "gta04:green:power";
 313                         reg = <0x4>;
 314                 };
 315
 316                 wifi_reset: wifi_reset@6 {
 317                         reg = <0x6>;
 318                         compatible = "gpio";
 319                 };
 320         };
 321
 322         /* compass aka magnetometer */
 323         hmc5843@1e {
 324                 compatible = "honeywell,hmc5883l";
 325                 reg = <0x1e>;
 326         };
 327
 328         /* touchscreen */
 329         tsc2007@48 {
 330                 compatible = "ti,tsc2007";
 331                 reg = <0x48>;
 332                 interrupt-parent = <&gpio6>;
 333                 interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */
 334                 gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;
 335                 ti,x-plate-ohms = <600>;
 336         };
 337 };
 338
 339 &i2c3 {
 340         clock-frequency = <100000>;
 341 };
 342
 343 &usb_otg_hs {
 344         interface-type = <0>;
 345         usb-phy = <&usb2_phy>;
 346         phys = <&usb2_phy>;
 347         phy-names = "usb2-phy";
 348         mode = <3>;
 349         power = <50>;
 350 };
 351
 352 &usbhshost {
 353         port2-mode = "ehci-phy";
 354 };
 355
 356 &usbhsehci {
 357         phys = <0 &hsusb2_phy>;
 358 };
 359
 360 &mmc1 {
 361         pinctrl-names = "default";
 362         pinctrl-0 = <&mmc1_pins>;
 363         vmmc-supply = <&vmmc1>;
 364         bus-width = <4>;
 365         ti,non-removable;
 366 };
 367
 368 &mmc2 {
 369         vmmc-supply = <&vaux4>;
 370         bus-width = <4>;
 371         ti,non-removable;
 372         cap-power-off-card;
 373 };
 374
 375 &mmc3 {
 376         status = "disabled";
 377 };
 378
 379 &twl_keypad {
 380         status = "disabled";
 381 };
 382
 383 &uart1 {
 384         pinctrl-names = "default";
 385         pinctrl-0 = <&uart1_pins>;
 386 };
 387
 388 &uart2 {
 389         pinctrl-names = "default";
 390         pinctrl-0 = <&uart2_pins>;
 391 };
 392
 393 &uart3 {
 394         pinctrl-names = "default";
 395         pinctrl-0 = <&uart3_pins>;
 396 };
 397
 398 &charger {
 399         ti,bb-uvolt = <3200000>;
 400         ti,bb-uamp = <150>;
 401 };
 402
 403 /* spare */
 404 &vaux1 {
 405         regulator-min-microvolt = <2500000>;
 406         regulator-max-microvolt = <3000000>;
 407 };
 408
 409 /* sensors */
 410 &vaux2 {
 411         regulator-min-microvolt = <2800000>;
 412         regulator-max-microvolt = <2800000>;
 413         regulator-always-on;
 414 };
 415
 416 /* camera */
 417 &vaux3 {
 418         regulator-min-microvolt = <2500000>;
 419         regulator-max-microvolt = <2500000>;
 420 };
 421
 422 /* WLAN/BT */
 423 &vaux4 {
 424         regulator-min-microvolt = <2800000>;
 425         regulator-max-microvolt = <3150000>;
 426 };
 427
 428 /* GPS LNA */
 429 &vsim {
 430         regulator-min-microvolt = <2800000>;
 431         regulator-max-microvolt = <3150000>;
 432 };
 433
 434 &dss {
 435         pinctrl-names = "default";
 436         pinctrl-0 = < &dss_dpi_pins >;
 437
 438         status = "okay";
 439         vdds_dsi-supply = <&vpll2>;
 440
 441         port {
 442                 dpi_out: endpoint {
 443                         remote-endpoint = <&lcd_in>;
 444                         data-lines = <24>;
 445                 };
 446         };
 447 };
 448
 449 &venc {
 450         status = "okay";
 451
 452         vdda-supply = <&vdac>;
 453
 454         port {
 455                 venc_out: endpoint {
 456                         remote-endpoint = <&opa_in>;
 457                         ti,channels = <2>;
 458                         ti,invert-polarity;
 459                 };
 460         };
 461 };
 462
 463 &gpmc {
 464         ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
 465
 466         nand@0,0 {
 467                 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
 468                 nand-bus-width = <16>;
 469                 ti,nand-ecc-opt = "bch8";
 470
 471                 gpmc,sync-clk-ps = <0>;
 472                 gpmc,cs-on-ns = <0>;
 473                 gpmc,cs-rd-off-ns = <44>;
 474                 gpmc,cs-wr-off-ns = <44>;
 475                 gpmc,adv-on-ns = <6>;
 476                 gpmc,adv-rd-off-ns = <34>;
 477                 gpmc,adv-wr-off-ns = <44>;
 478                 gpmc,we-off-ns = <40>;
 479                 gpmc,oe-off-ns = <54>;
 480                 gpmc,access-ns = <64>;
 481                 gpmc,rd-cycle-ns = <82>;
 482                 gpmc,wr-cycle-ns = <82>;
 483                 gpmc,wr-access-ns = <40>;
 484                 gpmc,wr-data-mux-bus-ns = <0>;
 485                 gpmc,device-width = <2>;
 486
 487                 #address-cells = <1>;
 488                 #size-cells = <1>;
 489
 490                 x-loader@0 {
 491                         label = "X-Loader";
 492                         reg = <0 0x80000>;
 493                 };
 494
 495                 bootloaders@80000 {
 496                         label = "U-Boot";
 497                         reg = <0x80000 0x1e0000>;
 498                 };
 499
 500                 bootloaders_env@260000 {
 501                         label = "U-Boot Env";
 502                         reg = <0x260000 0x20000>;
 503                 };
 504
 505                 kernel@280000 {
 506                         label = "Kernel";
 507                         reg = <0x280000 0x400000>;
 508                 };
 509
 510                 filesystem@680000 {
 511                         label = "File System";
 512                         reg = <0x680000 0xf980000>;
 513                 };
 514         };
 515 };
 516
 517 &mcbsp2 {
 518         status = "okay";
 519 };