kernel/arch/arm/boot/dts/am335x-evmsk.dts

   1 /*
   2  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 /*
  10  * AM335x Starter Kit
  11  * http://www.ti.com/tool/tmdssk3358
  12  */
  13
  14 /dts-v1/;
  15
  16 #include "am33xx.dtsi"
  17 #include <dt-bindings/pwm/pwm.h>
  18 #include <dt-bindings/interrupt-controller/irq.h>
  19
  20 / {
  21         model = "TI AM335x EVM-SK";
  22         compatible = "ti,am335x-evmsk", "ti,am33xx";
  23
  24         cpus {
  25                 cpu@0 {
  26                         cpu0-supply = <&vdd1_reg>;
  27                 };
  28         };
  29
  30         memory {
  31                 device_type = "memory";
  32                 reg = <0x80000000 0x10000000>; /* 256 MB */
  33         };
  34
  35         vbat: fixedregulator@0 {
  36                 compatible = "regulator-fixed";
  37                 regulator-name = "vbat";
  38                 regulator-min-microvolt = <5000000>;
  39                 regulator-max-microvolt = <5000000>;
  40                 regulator-boot-on;
  41         };
  42
  43         lis3_reg: fixedregulator@1 {
  44                 compatible = "regulator-fixed";
  45                 regulator-name = "lis3_reg";
  46                 regulator-boot-on;
  47         };
  48
  49         wl12xx_vmmc: fixedregulator@2 {
  50                 pinctrl-names = "default";
  51                 pinctrl-0 = <&wl12xx_gpio>;
  52                 compatible = "regulator-fixed";
  53                 regulator-name = "vwl1271";
  54                 regulator-min-microvolt = <1800000>;
  55                 regulator-max-microvolt = <1800000>;
  56                 gpio = <&gpio1 29 0>;
  57                 startup-delay-us = <70000>;
  58                 enable-active-high;
  59         };
  60
  61         vtt_fixed: fixedregulator@3 {
  62                 compatible = "regulator-fixed";
  63                 regulator-name = "vtt";
  64                 regulator-min-microvolt = <1500000>;
  65                 regulator-max-microvolt = <1500000>;
  66                 gpio = <&gpio0 7 GPIO_ACTIVE_HIGH>;
  67                 regulator-always-on;
  68                 regulator-boot-on;
  69                 enable-active-high;
  70         };
  71
  72         leds {
  73                 pinctrl-names = "default";
  74                 pinctrl-0 = <&user_leds_s0>;
  75
  76                 compatible = "gpio-leds";
  77
  78                 led@1 {
  79                         label = "evmsk:green:usr0";
  80                         gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
  81                         default-state = "off";
  82                 };
  83
  84                 led@2 {
  85                         label = "evmsk:green:usr1";
  86                         gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
  87                         default-state = "off";
  88                 };
  89
  90                 led@3 {
  91                         label = "evmsk:green:mmc0";
  92                         gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
  93                         linux,default-trigger = "mmc0";
  94                         default-state = "off";
  95                 };
  96
  97                 led@4 {
  98                         label = "evmsk:green:heartbeat";
  99                         gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 100                         linux,default-trigger = "heartbeat";
 101                         default-state = "off";
 102                 };
 103         };
 104
 105         gpio_buttons: gpio_buttons@0 {
 106                 compatible = "gpio-keys";
 107                 #address-cells = <1>;
 108                 #size-cells = <0>;
 109
 110                 switch@1 {
 111                         label = "button0";
 112                         linux,code = <0x100>;
 113                         gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
 114                 };
 115
 116                 switch@2 {
 117                         label = "button1";
 118                         linux,code = <0x101>;
 119                         gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
 120                 };
 121
 122                 switch@3 {
 123                         label = "button2";
 124                         linux,code = <0x102>;
 125                         gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
 126                         gpio-key,wakeup;
 127                 };
 128
 129                 switch@4 {
 130                         label = "button3";
 131                         linux,code = <0x103>;
 132                         gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
 133                 };
 134         };
 135
 136         backlight {
 137                 compatible = "pwm-backlight";
 138                 pwms = <&ecap2 0 50000 PWM_POLARITY_INVERTED>;
 139                 brightness-levels = <0 58 61 66 75 90 125 170 255>;
 140                 default-brightness-level = <8>;
 141         };
 142
 143         sound {
 144                 compatible = "ti,da830-evm-audio";
 145                 ti,model = "AM335x-EVMSK";
 146                 ti,audio-codec = <&tlv320aic3106>;
 147                 ti,mcasp-controller = <&mcasp1>;
 148                 ti,codec-clock-rate = <24000000>;
 149                 ti,audio-routing =
 150                         "Headphone Jack",       "HPLOUT",
 151                         "Headphone Jack",       "HPROUT";
 152         };
 153
 154         panel {
 155                 compatible = "ti,tilcdc,panel";
 156                 pinctrl-names = "default", "sleep";
 157                 pinctrl-0 = <&lcd_pins_default>;
 158                 pinctrl-1 = <&lcd_pins_sleep>;
 159                 status = "okay";
 160                 panel-info {
 161                         ac-bias           = <255>;
 162                         ac-bias-intrpt    = <0>;
 163                         dma-burst-sz      = <16>;
 164                         bpp               = <32>;
 165                         fdd               = <0x80>;
 166                         sync-edge         = <0>;
 167                         sync-ctrl         = <1>;
 168                         raster-order      = <0>;
 169                         fifo-th           = <0>;
 170                 };
 171                 display-timings {
 172                         480x272 {
 173                                 hactive         = <480>;
 174                                 vactive         = <272>;
 175                                 hback-porch     = <43>;
 176                                 hfront-porch    = <8>;
 177                                 hsync-len       = <4>;
 178                                 vback-porch     = <12>;
 179                                 vfront-porch    = <4>;
 180                                 vsync-len       = <10>;
 181                                 clock-frequency = <9000000>;
 182                                 hsync-active    = <0>;
 183                                 vsync-active    = <0>;
 184                         };
 185                 };
 186         };
 187 };
 188
 189 &am33xx_pinmux {
 190         pinctrl-names = "default";
 191         pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
 192
 193         lcd_pins_default: lcd_pins_default {
 194                 pinctrl-single,pins = <
 195                         0x20 (PIN_OUTPUT | MUX_MODE1)   /* gpmc_ad8.lcd_data23 */
 196                         0x24 (PIN_OUTPUT | MUX_MODE1)   /* gpmc_ad9.lcd_data22 */
 197                         0x28 (PIN_OUTPUT | MUX_MODE1)   /* gpmc_ad10.lcd_data21 */
 198                         0x2c (PIN_OUTPUT | MUX_MODE1)   /* gpmc_ad11.lcd_data20 */
 199                         0x30 (PIN_OUTPUT | MUX_MODE1)   /* gpmc_ad12.lcd_data19 */
 200                         0x34 (PIN_OUTPUT | MUX_MODE1)   /* gpmc_ad13.lcd_data18 */
 201                         0x38 (PIN_OUTPUT | MUX_MODE1)   /* gpmc_ad14.lcd_data17 */
 202                         0x3c (PIN_OUTPUT | MUX_MODE1)   /* gpmc_ad15.lcd_data16 */
 203                         0xa0 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data0.lcd_data0 */
 204                         0xa4 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data1.lcd_data1 */
 205                         0xa8 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data2.lcd_data2 */
 206                         0xac (PIN_OUTPUT | MUX_MODE0)   /* lcd_data3.lcd_data3 */
 207                         0xb0 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data4.lcd_data4 */
 208                         0xb4 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data5.lcd_data5 */
 209                         0xb8 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data6.lcd_data6 */
 210                         0xbc (PIN_OUTPUT | MUX_MODE0)   /* lcd_data7.lcd_data7 */
 211                         0xc0 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data8.lcd_data8 */
 212                         0xc4 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data9.lcd_data9 */
 213                         0xc8 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data10.lcd_data10 */
 214                         0xcc (PIN_OUTPUT | MUX_MODE0)   /* lcd_data11.lcd_data11 */
 215                         0xd0 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data12.lcd_data12 */
 216                         0xd4 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data13.lcd_data13 */
 217                         0xd8 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data14.lcd_data14 */
 218                         0xdc (PIN_OUTPUT | MUX_MODE0)   /* lcd_data15.lcd_data15 */
 219                         0xe0 (PIN_OUTPUT | MUX_MODE0)   /* lcd_vsync.lcd_vsync */
 220                         0xe4 (PIN_OUTPUT | MUX_MODE0)   /* lcd_hsync.lcd_hsync */
 221                         0xe8 (PIN_OUTPUT | MUX_MODE0)   /* lcd_pclk.lcd_pclk */
 222                         0xec (PIN_OUTPUT | MUX_MODE0)   /* lcd_ac_bias_en.lcd_ac_bias_en */
 223                 >;
 224         };
 225
 226         lcd_pins_sleep: lcd_pins_sleep {
 227                 pinctrl-single,pins = <
 228                         0x20 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_ad8.lcd_data23 */
 229                         0x24 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_ad9.lcd_data22 */
 230                         0x28 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_ad10.lcd_data21 */
 231                         0x2c (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_ad11.lcd_data20 */
 232                         0x30 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_ad12.lcd_data19 */
 233                         0x34 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_ad13.lcd_data18 */
 234                         0x38 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_ad14.lcd_data17 */
 235                         0x3c (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_ad15.lcd_data16 */
 236                         0xa0 (PULL_DISABLE | MUX_MODE7) /* lcd_data0.lcd_data0 */
 237                         0xa4 (PULL_DISABLE | MUX_MODE7) /* lcd_data1.lcd_data1 */
 238                         0xa8 (PULL_DISABLE | MUX_MODE7) /* lcd_data2.lcd_data2 */
 239                         0xac (PULL_DISABLE | MUX_MODE7) /* lcd_data3.lcd_data3 */
 240                         0xb0 (PULL_DISABLE | MUX_MODE7) /* lcd_data4.lcd_data4 */
 241                         0xb4 (PULL_DISABLE | MUX_MODE7) /* lcd_data5.lcd_data5 */
 242                         0xb8 (PULL_DISABLE | MUX_MODE7) /* lcd_data6.lcd_data6 */
 243                         0xbc (PULL_DISABLE | MUX_MODE7) /* lcd_data7.lcd_data7 */
 244                         0xc0 (PULL_DISABLE | MUX_MODE7) /* lcd_data8.lcd_data8 */
 245                         0xc4 (PULL_DISABLE | MUX_MODE7) /* lcd_data9.lcd_data9 */
 246                         0xc8 (PULL_DISABLE | MUX_MODE7) /* lcd_data10.lcd_data10 */
 247                         0xcc (PULL_DISABLE | MUX_MODE7) /* lcd_data11.lcd_data11 */
 248                         0xd0 (PULL_DISABLE | MUX_MODE7) /* lcd_data12.lcd_data12 */
 249                         0xd4 (PULL_DISABLE | MUX_MODE7) /* lcd_data13.lcd_data13 */
 250                         0xd8 (PULL_DISABLE | MUX_MODE7) /* lcd_data14.lcd_data14 */
 251                         0xdc (PULL_DISABLE | MUX_MODE7) /* lcd_data15.lcd_data15 */
 252                         0xe0 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* lcd_vsync.lcd_vsync */
 253                         0xe4 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* lcd_hsync.lcd_hsync */
 254                         0xe8 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* lcd_pclk.lcd_pclk */
 255                         0xec (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* lcd_ac_bias_en.lcd_ac_bias_en */
 256                 >;
 257         };
 258
 259
 260         user_leds_s0: user_leds_s0 {
 261                 pinctrl-single,pins = <
 262                         0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)  /* gpmc_ad4.gpio1_4 */
 263                         0x14 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)  /* gpmc_ad5.gpio1_5 */
 264                         0x18 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)  /* gpmc_ad6.gpio1_6 */
 265                         0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)  /* gpmc_ad7.gpio1_7 */
 266                 >;
 267         };
 268
 269         gpio_keys_s0: gpio_keys_s0 {
 270                 pinctrl-single,pins = <
 271                         0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_oen_ren.gpio2_3 */
 272                         0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_advn_ale.gpio2_2 */
 273                         0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_wait0.gpio0_30 */
 274                         0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_ben0_cle.gpio2_5 */
 275                 >;
 276         };
 277
 278         i2c0_pins: pinmux_i2c0_pins {
 279                 pinctrl-single,pins = <
 280                         0x188 (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c0_sda.i2c0_sda */
 281                         0x18c (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c0_scl.i2c0_scl */
 282                 >;
 283         };
 284
 285         uart0_pins: pinmux_uart0_pins {
 286                 pinctrl-single,pins = <
 287                         0x170 (PIN_INPUT_PULLUP | MUX_MODE0)    /* uart0_rxd.uart0_rxd */
 288                         0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)         /* uart0_txd.uart0_txd */
 289                 >;
 290         };
 291
 292         clkout2_pin: pinmux_clkout2_pin {
 293                 pinctrl-single,pins = <
 294                         0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)         /* xdma_event_intr1.clkout2 */
 295                 >;
 296         };
 297
 298         ecap2_pins: backlight_pins {
 299                 pinctrl-single,pins = <
 300                         0x19c 0x4       /* mcasp0_ahclkr.ecap2_in_pwm2_out MODE4 */
 301                 >;
 302         };
 303
 304         cpsw_default: cpsw_default {
 305                 pinctrl-single,pins = <
 306                         /* Slave 1 */
 307                         0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
 308                         0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxdv.rgmii1_rctl */
 309                         0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
 310                         0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
 311                         0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
 312                         0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
 313                         0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
 314                         0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxclk.rgmii1_rclk */
 315                         0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxd3.rgmii1_rd3 */
 316                         0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxd2.rgmii1_rd2 */
 317                         0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxd1.rgmii1_rd1 */
 318                         0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxd0.rgmii1_rd0 */
 319
 320                         /* Slave 2 */
 321                         0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)  /* gpmc_a0.rgmii2_tctl */
 322                         0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)   /* gpmc_a1.rgmii2_rctl */
 323                         0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)  /* gpmc_a2.rgmii2_td3 */
 324                         0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)  /* gpmc_a3.rgmii2_td2 */
 325                         0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)  /* gpmc_a4.rgmii2_td1 */
 326                         0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)  /* gpmc_a5.rgmii2_td0 */
 327                         0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)  /* gpmc_a6.rgmii2_tclk */
 328                         0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)   /* gpmc_a7.rgmii2_rclk */
 329                         0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)   /* gpmc_a8.rgmii2_rd3 */
 330                         0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)   /* gpmc_a9.rgmii2_rd2 */
 331                         0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)   /* gpmc_a10.rgmii2_rd1 */
 332                         0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)   /* gpmc_a11.rgmii2_rd0 */
 333                 >;
 334         };
 335
 336         cpsw_sleep: cpsw_sleep {
 337                 pinctrl-single,pins = <
 338                         /* Slave 1 reset value */
 339                         0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 340                         0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 341                         0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 342                         0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 343                         0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 344                         0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 345                         0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 346                         0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 347                         0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 348                         0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 349                         0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 350                         0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 351
 352                         /* Slave 2 reset value*/
 353                         0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 354                         0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 355                         0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 356                         0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 357                         0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 358                         0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 359                         0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 360                         0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 361                         0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 362                         0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 363                         0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 364                         0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 365                 >;
 366         };
 367
 368         davinci_mdio_default: davinci_mdio_default {
 369                 pinctrl-single,pins = <
 370                         /* MDIO */
 371                         0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)    /* mdio_data.mdio_data */
 372                         0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)                   /* mdio_clk.mdio_clk */
 373                 >;
 374         };
 375
 376         davinci_mdio_sleep: davinci_mdio_sleep {
 377                 pinctrl-single,pins = <
 378                         /* MDIO reset value */
 379                         0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 380                         0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 381                 >;
 382         };
 383
 384         mmc1_pins: pinmux_mmc1_pins {
 385                 pinctrl-single,pins = <
 386                         0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 387                 >;
 388         };
 389
 390         mcasp1_pins: mcasp1_pins {
 391                 pinctrl-single,pins = <
 392                         0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
 393                         0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
 394                         0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
 395                         0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
 396                 >;
 397         };
 398
 399         mmc2_pins: pinmux_mmc2_pins {
 400                 pinctrl-single,pins = <
 401                         0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
 402                         0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
 403                         0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
 404                         0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
 405                         0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
 406                         0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
 407                         0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
 408                 >;
 409         };
 410
 411         wl12xx_gpio: pinmux_wl12xx_gpio {
 412                 pinctrl-single,pins = <
 413                         0x7c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
 414                 >;
 415         };
 416 };
 417
 418 &uart0 {
 419         pinctrl-names = "default";
 420         pinctrl-0 = <&uart0_pins>;
 421
 422         status = "okay";
 423 };
 424
 425 &i2c0 {
 426         pinctrl-names = "default";
 427         pinctrl-0 = <&i2c0_pins>;
 428
 429         status = "okay";
 430         clock-frequency = <400000>;
 431
 432         tps: tps@2d {
 433                 reg = <0x2d>;
 434         };
 435
 436         lis331dlh: lis331dlh@18 {
 437                 compatible = "st,lis331dlh", "st,lis3lv02d";
 438                 reg = <0x18>;
 439                 Vdd-supply = <&lis3_reg>;
 440                 Vdd_IO-supply = <&lis3_reg>;
 441
 442                 st,click-single-x;
 443                 st,click-single-y;
 444                 st,click-single-z;
 445                 st,click-thresh-x = <10>;
 446                 st,click-thresh-y = <10>;
 447                 st,click-thresh-z = <10>;
 448                 st,irq1-click;
 449                 st,irq2-click;
 450                 st,wakeup-x-lo;
 451                 st,wakeup-x-hi;
 452                 st,wakeup-y-lo;
 453                 st,wakeup-y-hi;
 454                 st,wakeup-z-lo;
 455                 st,wakeup-z-hi;
 456                 st,min-limit-x = <120>;
 457                 st,min-limit-y = <120>;
 458                 st,min-limit-z = <140>;
 459                 st,max-limit-x = <550>;
 460                 st,max-limit-y = <550>;
 461                 st,max-limit-z = <750>;
 462         };
 463
 464         tlv320aic3106: tlv320aic3106@1b {
 465                 compatible = "ti,tlv320aic3106";
 466                 reg = <0x1b>;
 467                 status = "okay";
 468
 469                 /* Regulators */
 470                 AVDD-supply = <&vaux2_reg>;
 471                 IOVDD-supply = <&vaux2_reg>;
 472                 DRVDD-supply = <&vaux2_reg>;
 473                 DVDD-supply = <&vbat>;
 474         };
 475 };
 476
 477 &usb {
 478         status = "okay";
 479 };
 480
 481 &usb_ctrl_mod {
 482         status = "okay";
 483 };
 484
 485 &usb0_phy {
 486         status = "okay";
 487 };
 488
 489 &usb1_phy {
 490         status = "okay";
 491 };
 492
 493 &usb0 {
 494         status = "okay";
 495 };
 496
 497 &usb1 {
 498         status = "okay";
 499         dr_mode = "host";
 500 };
 501
 502 &cppi41dma  {
 503         status = "okay";
 504 };
 505
 506 &epwmss2 {
 507         status = "okay";
 508
 509         ecap2: ecap@48304100 {
 510                 status = "okay";
 511                 pinctrl-names = "default";
 512                 pinctrl-0 = <&ecap2_pins>;
 513         };
 514 };
 515
 516 #include "tps65910.dtsi"
 517
 518 &tps {
 519         vcc1-supply = <&vbat>;
 520         vcc2-supply = <&vbat>;
 521         vcc3-supply = <&vbat>;
 522         vcc4-supply = <&vbat>;
 523         vcc5-supply = <&vbat>;
 524         vcc6-supply = <&vbat>;
 525         vcc7-supply = <&vbat>;
 526         vccio-supply = <&vbat>;
 527
 528         regulators {
 529                 vrtc_reg: regulator@0 {
 530                         regulator-always-on;
 531                 };
 532
 533                 vio_reg: regulator@1 {
 534                         regulator-always-on;
 535                 };
 536
 537                 vdd1_reg: regulator@2 {
 538                         /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 539                         regulator-name = "vdd_mpu";
 540                         regulator-min-microvolt = <912500>;
 541                         regulator-max-microvolt = <1312500>;
 542                         regulator-boot-on;
 543                         regulator-always-on;
 544                 };
 545
 546                 vdd2_reg: regulator@3 {
 547                         /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
 548                         regulator-name = "vdd_core";
 549                         regulator-min-microvolt = <912500>;
 550                         regulator-max-microvolt = <1150000>;
 551                         regulator-boot-on;
 552                         regulator-always-on;
 553                 };
 554
 555                 vdd3_reg: regulator@4 {
 556                         regulator-always-on;
 557                 };
 558
 559                 vdig1_reg: regulator@5 {
 560                         regulator-always-on;
 561                 };
 562
 563                 vdig2_reg: regulator@6 {
 564                         regulator-always-on;
 565                 };
 566
 567                 vpll_reg: regulator@7 {
 568                         regulator-always-on;
 569                 };
 570
 571                 vdac_reg: regulator@8 {
 572                         regulator-always-on;
 573                 };
 574
 575                 vaux1_reg: regulator@9 {
 576                         regulator-always-on;
 577                 };
 578
 579                 vaux2_reg: regulator@10 {
 580                         regulator-always-on;
 581                 };
 582
 583                 vaux33_reg: regulator@11 {
 584                         regulator-always-on;
 585                 };
 586
 587                 vmmc_reg: regulator@12 {
 588                         regulator-min-microvolt = <1800000>;
 589                         regulator-max-microvolt = <3300000>;
 590                         regulator-always-on;
 591                 };
 592         };
 593 };
 594
 595 &mac {
 596         pinctrl-names = "default", "sleep";
 597         pinctrl-0 = <&cpsw_default>;
 598         pinctrl-1 = <&cpsw_sleep>;
 599         dual_emac = <1>;
 600         status = "okay";
 601 };
 602
 603 &davinci_mdio {
 604         pinctrl-names = "default", "sleep";
 605         pinctrl-0 = <&davinci_mdio_default>;
 606         pinctrl-1 = <&davinci_mdio_sleep>;
 607         status = "okay";
 608 };
 609
 610 &cpsw_emac0 {
 611         phy_id = <&davinci_mdio>, <0>;
 612         phy-mode = "rgmii-txid";
 613         dual_emac_res_vlan = <1>;
 614 };
 615
 616 &cpsw_emac1 {
 617         phy_id = <&davinci_mdio>, <1>;
 618         phy-mode = "rgmii-txid";
 619         dual_emac_res_vlan = <2>;
 620 };
 621
 622 &mmc1 {
 623         status = "okay";
 624         vmmc-supply = <&vmmc_reg>;
 625         bus-width = <4>;
 626         pinctrl-names = "default";
 627         pinctrl-0 = <&mmc1_pins>;
 628         cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 629 };
 630
 631 &sham {
 632         status = "okay";
 633 };
 634
 635 &aes {
 636         status = "okay";
 637 };
 638
 639 &gpio0 {
 640         ti,no-reset-on-init;
 641 };
 642
 643 &mmc2 {
 644         status = "okay";
 645         vmmc-supply = <&wl12xx_vmmc>;
 646         ti,non-removable;
 647         bus-width = <4>;
 648         cap-power-off-card;
 649         pinctrl-names = "default";
 650         pinctrl-0 = <&mmc2_pins>;
 651
 652         #address-cells = <1>;
 653         #size-cells = <0>;
 654         wlcore: wlcore@2 {
 655                 compatible = "ti,wl1271";
 656                 reg = <2>;
 657                 interrupt-parent = <&gpio0>;
 658                 interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; /* gpio 31 */
 659                 ref-clock-frequency = <38400000>;
 660         };
 661 };
 662
 663 &mcasp1 {
 664                 pinctrl-names = "default";
 665                 pinctrl-0 = <&mcasp1_pins>;
 666
 667                 status = "okay";
 668
 669                 op-mode = <0>;          /* MCASP_IIS_MODE */
 670                 tdm-slots = <2>;
 671                 /* 4 serializers */
 672                 serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
 673                         0 0 1 2
 674                 >;
 675                 tx-num-evt = <32>;
 676                 rx-num-evt = <32>;
 677 };
 678
 679 &tscadc {
 680         status = "okay";
 681         tsc {
 682                 ti,wires = <4>;
 683                 ti,x-plate-resistance = <200>;
 684                 ti,coordinate-readouts = <5>;
 685                 ti,wire-config = <0x00 0x11 0x22 0x33>;
 686         };
 687 };
 688
 689 &lcdc {
 690       status = "okay";
 691 };