Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / Documentation / devicetree / bindings / sound / wm8731.txt
1 WM8731 audio CODEC
2
3 This device supports both I2C and SPI (configured with pin strapping
4 on the board).
5
6 Required properties:
7
8   - compatible : "wlf,wm8731"
9
10   - reg : the I2C address of the device for I2C, the chip select
11           number for SPI.
12
13 Example:
14
15 codec: wm8731@1a {
16         compatible = "wlf,wm8731";
17         reg = <0x1a>;
18 };
19
20 Available audio endpoints for an audio-routing table:
21  * LOUT: Left Channel Line Output
22  * ROUT: Right Channel Line Output
23  * LHPOUT: Left Channel Headphone Output
24  * RHPOUT: Right Channel Headphone Output
25  * LLINEIN: Left Channel Line Input
26  * RLINEIN: Right Channel Line Input
27  * MICIN: Microphone Input