kernel/Documentation/devicetree/bindings/regulator/88pm800.txt

   1 Marvell 88PM800 regulator
   2
   3 Required properties:
   4 - compatible: "marvell,88pm800"
   5 - reg: I2C slave address
   6 - regulators: A node that houses a sub-node for each regulator within the
   7   device. Each sub-node is identified using the node's name (or the deprecated
   8   regulator-compatible property if present), with valid values listed below.
   9   The content of each sub-node is defined by the standard binding for
  10   regulators; see regulator.txt.
  11
  12 The valid names for regulators are:
  13
  14   buck1, buck2, buck3, buck4, buck5, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7,
  15   ldo8, ldo9, ldo10, ldo11, ldo12, ldo13, ldo14, ldo15, ldo16, ldo17, ldo18, ldo19
  16
  17 Example:
  18
  19         pmic: 88pm800@31 {
  20                 compatible = "marvell,88pm800";
  21                 reg = <0x31>;
  22
  23                 regulators {
  24                         buck1 {
  25                                 regulator-min-microvolt = <600000>;
  26                                 regulator-max-microvolt = <3950000>;
  27                                 regulator-boot-on;
  28                                 regulator-always-on;
  29                         };
  30                         ldo1 {
  31                                 regulator-min-microvolt = <600000>;
  32                                 regulator-max-microvolt = <15000000>;
  33                                 regulator-boot-on;
  34                                 regulator-always-on;
  35                         };
  36 ...
  37                 };
  38         };