Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / Documentation / devicetree / bindings / net / smsc-lan91c111.txt
1 SMSC LAN91c111 Ethernet mac
2
3 Required properties:
4 - compatible = "smsc,lan91c111";
5 - reg : physical address and size of registers
6 - interrupts : interrupt connection
7
8 Optional properties:
9 - phy-device : see ethernet.txt file in the same directory
10 - reg-io-width : Mask of sizes (in bytes) of the IO accesses that
11   are supported on the device.  Valid value for SMSC LAN91c111 are
12   1, 2 or 4.  If it's omitted or invalid, the size would be 2 meaning
13   16-bit access only.
14 - power-gpios: GPIO to control the PWRDWN pin
15 - reset-gpios: GPIO to control the RESET pin