Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / Documentation / devicetree / bindings / mips / cavium / cib.txt
1 * Cavium Interrupt Bus widget
2
3 Properties:
4 - compatible: "cavium,octeon-7130-cib"
5
6   Compatibility with cn70XX SoCs.
7
8 - interrupt-controller:  This is an interrupt controller.
9
10 - reg: Two elements consisting of the addresses of the RAW and EN
11   registers of the CIB block
12
13 - cavium,max-bits: The index (zero based) of the highest numbered bit
14   in the CIB block.
15
16 - interrupt-parent:  Always the CIU on the SoC.
17
18 - interrupts: The CIU line to which the CIB block is connected.
19
20 - #interrupt-cells: Must be <2>.  The first cell is the bit within the
21    CIB.  The second cell specifies the triggering semantics of the
22    line.
23
24 Example:
25
26         interrupt-controller@107000000e000 {
27                 compatible = "cavium,octeon-7130-cib";
28                 reg = <0x10700 0x0000e000 0x0 0x8>, /* RAW */
29                       <0x10700 0x0000e100 0x0 0x8>; /* EN */
30                 cavium,max-bits = <23>;
31
32                 interrupt-controller;
33                 interrupt-parent = <&ciu>;
34                 interrupts = <1 24>;
35                 /* Interrupts are specified by two parts:
36                  * 1) Bit number in the CIB* registers
37                  * 2) Triggering (1 - edge rising
38                  *                2 - edge falling
39                  *                4 - level active high
40                  *                8 - level active low)
41                  */
42                 #interrupt-cells = <2>;
43         };