Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / Documentation / devicetree / bindings / mfd / atmel-hlcdc.txt
1 Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver
2
3 Required properties:
4  - compatible: value should be one of the following:
5    "atmel,sama5d3-hlcdc"
6  - reg: base address and size of the HLCDC device registers.
7  - clock-names: the name of the 3 clocks requested by the HLCDC device.
8    Should contain "periph_clk", "sys_clk" and "slow_clk".
9  - clocks: should contain the 3 clocks requested by the HLCDC device.
10  - interrupts: should contain the description of the HLCDC interrupt line
11
12 The HLCDC IP exposes two subdevices:
13  - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt
14  - a Display Controller: see ../drm/atmel-hlcdc-dc.txt
15
16 Example:
17
18         hlcdc: hlcdc@f0030000 {
19                 compatible = "atmel,sama5d3-hlcdc";
20                 reg = <0xf0030000 0x2000>;
21                 clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
22                 clock-names = "periph_clk","sys_clk", "slow_clk";
23                 interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
24                 status = "disabled";
25
26                 hlcdc-display-controller {
27                         compatible = "atmel,hlcdc-display-controller";
28                         pinctrl-names = "default";
29                         pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
30                         #address-cells = <1>;
31                         #size-cells = <0>;
32
33                         port@0 {
34                                 #address-cells = <1>;
35                                 #size-cells = <0>;
36                                 reg = <0>;
37
38                                 hlcdc_panel_output: endpoint@0 {
39                                         reg = <0>;
40                                         remote-endpoint = <&panel_input>;
41                                 };
42                         };
43                 };
44
45                 hlcdc_pwm: hlcdc-pwm {
46                         compatible = "atmel,hlcdc-pwm";
47                         pinctrl-names = "default";
48                         pinctrl-0 = <&pinctrl_lcd_pwm>;
49                         #pwm-cells = <3>;
50                 };
51         };