Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / Documentation / devicetree / bindings / mfd / 88pm860x.txt
1 * Marvell 88PM860x Power Management IC
2
3 Required parent device properties:
4 - compatible : "marvell,88pm860x"
5 - reg : the I2C slave address for the 88pm860x chip
6 - interrupts : IRQ line for the 88pm860x chip
7 - interrupt-controller: describes the 88pm860x as an interrupt controller (has its own domain)
8 - #interrupt-cells : should be 1.
9                 - The cell is the 88pm860x local IRQ number
10
11 Optional parent device properties:
12 - marvell,88pm860x-irq-read-clr: inicates whether interrupt status is cleared by read
13 - marvell,88pm860x-slave-addr: 88pm860x are two chips solution. <reg> stores the I2C address
14                                 of one chip, and this property stores the I2C address of
15                                 another chip.
16
17 88pm860x consists of a large and varied group of sub-devices:
18
19 Device                   Supply Names    Description
20 ------                   ------------    -----------
21 88pm860x-onkey          :               : On key
22 88pm860x-rtc            :               : RTC
23 88pm8607                :               : Regulators
24 88pm860x-backlight      :               : Backlight
25 88pm860x-led            :               : Led
26 88pm860x-touch          :               : Touchscreen
27
28 Example:
29
30         pmic: 88pm860x@34 {
31                 compatible = "marvell,88pm860x";
32                 reg = <0x34>;
33                 interrupts = <4>;
34                 interrupt-parent = <&intc>;
35                 interrupt-controller;
36                 #interrupt-cells = <1>;
37
38                 marvell,88pm860x-irq-read-clr;
39                 marvell,88pm860x-slave-addr = <0x11>;
40
41                 regulators {
42                         BUCK1 {
43                                 regulator-min-microvolt = <1000000>;
44                                 regulator-max-microvolt = <1500000>;
45                                 regulator-boot-on;
46                                 regulator-always-on;
47                         };
48                         LDO1 {
49                                 regulator-min-microvolt = <1200000>;
50                                 regulator-max-microvolt = <2800000>;
51                                 regulator-boot-on;
52                                 regulator-always-on;
53                         };
54                 };
55                 rtc {
56                         marvell,88pm860x-vrtc = <1>;
57                 };
58                 touch {
59                         marvell,88pm860x-gpadc-prebias = <1>;
60                         marvell,88pm860x-gpadc-slot-cycle = <1>;
61                         marvell,88pm860x-tsi-prebias = <6>;
62                         marvell,88pm860x-pen-prebias = <16>;
63                         marvell,88pm860x-pen-prechg = <2>;
64                         marvell,88pm860x-resistor-X = <300>;
65                 };
66                 backlights {
67                         backlight-0 {
68                                 marvell,88pm860x-iset = <4>;
69                                 marvell,88pm860x-pwm = <3>;
70                         };
71                         backlight-2 {
72                         };
73                 };
74                 leds {
75                         led0-red {
76                                 marvell,88pm860x-iset = <12>;
77                         };
78                         led0-green {
79                                 marvell,88pm860x-iset = <12>;
80                         };
81                         led0-blue {
82                                 marvell,88pm860x-iset = <12>;
83                         };
84                 };
85         };