Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / Documentation / devicetree / bindings / media / i2c / mt9p031.txt
1 * Aptina 1/2.5-Inch 5Mp CMOS Digital Image Sensor
2
3 The Aptina MT9P031 is a 1/2.5-inch CMOS active pixel digital image sensor with
4 an active array size of 2592H x 1944V. It is programmable through a simple
5 two-wire serial interface.
6
7 Required Properties:
8 - compatible: value should be either one among the following
9         (a) "aptina,mt9p031" for mt9p031 sensor
10         (b) "aptina,mt9p031m" for mt9p031m sensor
11
12 - input-clock-frequency: Input clock frequency.
13
14 - pixel-clock-frequency: Pixel clock frequency.
15
16 Optional Properties:
17 - reset-gpios: Chip reset GPIO
18
19 For further reading on port node refer to
20 Documentation/devicetree/bindings/media/video-interfaces.txt.
21
22 Example:
23
24         i2c0@1c22000 {
25                 ...
26                 ...
27                 mt9p031@5d {
28                         compatible = "aptina,mt9p031";
29                         reg = <0x5d>;
30                         reset-gpios = <&gpio3 30 0>;
31
32                         port {
33                                 mt9p031_1: endpoint {
34                                         input-clock-frequency = <6000000>;
35                                         pixel-clock-frequency = <96000000>;
36                                 };
37                         };
38                 };
39                 ...
40         };