Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / Documentation / devicetree / bindings / input / touchscreen / chipone_icn8318.txt
1 * ChipOne icn8318 I2C touchscreen controller
2
3 Required properties:
4  - compatible             : "chipone,icn8318"
5  - reg                    : I2C slave address of the chip (0x40)
6  - interrupt-parent       : a phandle pointing to the interrupt controller
7                             serving the interrupt for this chip
8  - interrupts             : interrupt specification for the icn8318 interrupt
9  - wake-gpios             : GPIO specification for the WAKE input
10  - touchscreen-size-x     : horizontal resolution of touchscreen (in pixels)
11  - touchscreen-size-y     : vertical resolution of touchscreen (in pixels)
12
13 Optional properties:
14  - pinctrl-names          : should be "default"
15  - pinctrl-0:             : a phandle pointing to the pin settings for the
16                             control gpios
17  - touchscreen-fuzz-x     : horizontal noise value of the absolute input
18                             device (in pixels)
19  - touchscreen-fuzz-y     : vertical noise value of the absolute input
20                             device (in pixels)
21  - touchscreen-inverted-x : X axis is inverted (boolean)
22  - touchscreen-inverted-y : Y axis is inverted (boolean)
23  - touchscreen-swapped-x-y        : X and Y axis are swapped (boolean)
24                             Swapping is done after inverting the axis
25
26 Example:
27
28 i2c@00000000 {
29         /* ... */
30
31         chipone_icn8318@40 {
32                 compatible = "chipone,icn8318";
33                 reg = <0x40>;
34                 interrupt-parent = <&pio>;
35                 interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
36                 pinctrl-names = "default";
37                 pinctrl-0 = <&ts_wake_pin_p66>;
38                 wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
39                 touchscreen-size-x = <800>;
40                 touchscreen-size-y = <480>;
41                 touchscreen-inverted-x;
42                 touchscreen-swapped-x-y;
43         };
44
45         /* ... */
46 };