Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / Documentation / devicetree / bindings / arm / psci.txt
1 * Power State Coordination Interface (PSCI)
2
3 Firmware implementing the PSCI functions described in ARM document number
4 ARM DEN 0022A ("Power State Coordination Interface System Software on ARM
5 processors") can be used by Linux to initiate various CPU-centric power
6 operations.
7
8 Issue A of the specification describes functions for CPU suspend, hotplug
9 and migration of secure software.
10
11 Functions are invoked by trapping to the privilege level of the PSCI
12 firmware (specified as part of the binding below) and passing arguments
13 in a manner similar to that specified by AAPCS:
14
15          r0             => 32-bit Function ID / return value
16         {r1 - r3}       => Parameters
17
18 Note that the immediate field of the trapping instruction must be set
19 to #0.
20
21
22 Main node required properties:
23
24  - compatible    : should contain at least one of:
25
26                                  * "arm,psci" : for implementations complying to PSCI versions prior to
27                                         0.2. For these cases function IDs must be provided.
28
29                                  * "arm,psci-0.2" : for implementations complying to PSCI 0.2. Function
30                                         IDs are not required and should be ignored by an OS with PSCI 0.2
31                                         support, but are permitted to be present for compatibility with
32                                         existing software when "arm,psci" is later in the compatible list.
33
34  - method        : The method of calling the PSCI firmware. Permitted
35                    values are:
36
37                    "smc" : SMC #0, with the register assignments specified
38                            in this binding.
39
40                    "hvc" : HVC #0, with the register assignments specified
41                            in this binding.
42
43 Main node optional properties:
44
45  - cpu_suspend   : Function ID for CPU_SUSPEND operation
46
47  - cpu_off       : Function ID for CPU_OFF operation
48
49  - cpu_on        : Function ID for CPU_ON operation
50
51  - migrate       : Function ID for MIGRATE operation
52
53 Device tree nodes that require usage of PSCI CPU_SUSPEND function (ie idle
54 state nodes, as per bindings in [1]) must specify the following properties:
55
56 - arm,psci-suspend-param
57                 Usage: Required for state nodes[1] if the corresponding
58                        idle-states node entry-method property is set
59                        to "psci".
60                 Value type: <u32>
61                 Definition: power_state parameter to pass to the PSCI
62                             suspend call.
63
64 Example:
65
66 Case 1: PSCI v0.1 only.
67
68         psci {
69                 compatible      = "arm,psci";
70                 method          = "smc";
71                 cpu_suspend     = <0x95c10000>;
72                 cpu_off         = <0x95c10001>;
73                 cpu_on          = <0x95c10002>;
74                 migrate         = <0x95c10003>;
75         };
76
77 Case 2: PSCI v0.2 only
78
79         psci {
80                 compatible      = "arm,psci-0.2";
81                 method          = "smc";
82         };
83
84 Case 3: PSCI v0.2 and PSCI v0.1.
85
86         A DTB may provide IDs for use by kernels without PSCI 0.2 support,
87         enabling firmware and hypervisors to support existing and new kernels.
88         These IDs will be ignored by kernels with PSCI 0.2 support, which will
89         use the standard PSCI 0.2 IDs exclusively.
90
91         psci {
92                 compatible = "arm,psci-0.2", "arm,psci";
93                 method = "hvc";
94
95                 cpu_on = < arbitrary value >;
96                 cpu_off = < arbitrary value >;
97
98                 ...
99         };
100
101 [1] Kernel documentation - ARM idle states bindings
102     Documentation/devicetree/bindings/arm/idle-states.txt