Update Kuberef to use most recent release of BMRA.
Also updates configuration with minor changes and additions.
Signed-off-by: Michael S. Pedersen <michaelx.pedersen@intel.com>
Change-Id: Ifc4ef114564a2085000c23347390089227c0ebd9
Reviewed-on: https://gerrit.opnfv.org/gerrit/c/kuberef/+/72429
Tested-by: jenkins-ci <jenkins-opnfv-ci@opnfv.org>
Reviewed-by: Rihab Banday <rihab.banday@ericsson.com>
# Define environment variables
export VENDOR=${VENDOR:-intel}
+export DISTRO=${DISTRO:-centos7}
export INSTALLER=bmra
export BMRA_PROFILE=$(yq r $CURRENTPATH/hw_config/$VENDOR/idf.yaml bmra.profile)
ansible_cmd="/bin/bash -c '"
if [[ "$DEPLOYMENT" == "k8s" ]]; then
ansible-playbook -i "$CURRENTPATH"/sw_config/bmra/inventory.ini "$CURRENTPATH"/playbooks/pre-install.yaml
- ansible_cmd+="yum -y remove python-netaddr; pip install --upgrade pip; pip install ansible==2.9.6; ansible-playbook -i /bmra/inventory.ini /bmra/playbooks/k8s/patch_kubespray.yml;"
+ ansible_cmd+="yum -y remove python-netaddr; pip install --upgrade pip; pip install ansible==2.9.17; ansible-playbook -i /bmra/inventory.ini /bmra/playbooks/k8s/patch_kubespray.yml;"
fi
ansible_cmd+="ansible-playbook -i /bmra/inventory.ini /bmra/playbooks/${BMRA_PROFILE}.yml'"
done
fi
if [ ! -d "${PROJECT_ROOT}/container-experience-kits" ]; then
- git clone --recurse-submodules --depth 1 https://github.com/intel/container-experience-kits.git -b v2.1.0 ${PROJECT_ROOT}/container-experience-kits/
+ git clone --recurse-submodules --depth 1 https://github.com/intel/container-experience-kits.git -b v21.03 ${PROJECT_ROOT}/container-experience-kits/
cp -r ${PROJECT_ROOT}/container-experience-kits/examples/${BMRA_PROFILE}/group_vars ${PROJECT_ROOT}/container-experience-kits/
# NOTE The following condition/workaround will be removed once the reported issue https://github.com/intel/container-experience-kits/issues/68
# is fixed upstream
${PROJECT_ROOT}/container-experience-kits/roles/cmk_install/tasks/main.yml
cp ${PROJECT_ROOT}/${INSTALLER}/patched_vfio.yml \
${PROJECT_ROOT}/container-experience-kits/roles/sriov_nic_init/tasks/bind_vf_driver.yml
+cp ${PROJECT_ROOT}/${INSTALLER}/ansible.cfg \
+ ${PROJECT_ROOT}/container-experience-kits/ansible.cfg
+cp ${PROJECT_ROOT}/${INSTALLER}/patched_rhel_packages.yml \
+ ${PROJECT_ROOT}/container-experience-kits/roles/bootstrap/install_packages/tasks/rhel.yml
+
sudo docker run --rm \
-e ANSIBLE_CONFIG=/bmra/ansible.cfg \
-e PROFILE=${BMRA_PROFILE} \
network_roles:
sriov:
- name: eno2
- bus_info: "19:00.1"
- device_info: "8086:1572:0200"
- driver: iavf
+ pci: "19:00.1"
+ pf_driver: i40e
+ vf_driver: iavf
sriov_dpdk:
- name: eno4
- bus_info: "19:00.3"
- device_info: "8086:1572:0200"
- driver: vfio-pci
+ pci: "19:00.3"
+ pf_driver: i40e
+ vf_driver: vfio-pci
+ device_roles:
+# qat:
+# - name: crypto01
+# pci: "0000:ab:00.0"
+# mod_type: qat_c62x
+# pci_type: c6xx
+# vfs: 4
features:
sriov:
enable: true
hugepages_2M: 10240
isolcpus:
enable: true
- cpus: "8-27,36-55"
+ autogenerate: true
+ cpus: "8-27,36-55" # Not used when autogenerate is true
nfd: true
cmk:
enable: true
tas:
enable: true
demo_policy: false
+ bond_cni: true
psp: true
+ qat:
+ enable: false
+ update_drivers: false
network_roles:
sriov:
- name: eth2
- bus_info: "05:00.0"
- device_info: "8086:10f8:0200"
- driver: vfio-pci
+ pci: "05:00.0"
+ pf_driver: i40e
+ vf_driver: vfio-pci
sriov_dpdk:
- name: eth3
- bus_info: "05:00.1"
- device_info: "8086:10f8:0200"
- driver: vfio-pci
+ pci: "05:00.1"
+ pf_driver: i40e
+ vf_driver: vfio-pci
+ device_roles:
+# qat:
+# - name: crypto01
+# pci: "0000:ab:00.0"
+# mod_type: qat_c62x
+# pci_type: c6xx
+# vfs: 4
features:
sriov:
enable: false
hugepages_2M: 10240
isolcpus:
enable: true
- cpus: "4-9,14-19,24-29,34-39"
+ autogenerate: true
+ cpus: "4-9,14-19,24-29,34-39" # Not used when autogenerate is true
nfd: true
cmk:
enable: true
tas:
enable: true
demo_policy: false
+ bond_cni: true
psp: true
+ qat:
+ enable: false
+ update_drivers: false
network_roles:
sriov:
- name: eth0
- bus_info: "18:00.0"
- device_info: "8086:158b:0200"
- driver: vfio-pci
+ pci: "18:00.0"
+ pf_driver: i40e
+ vf_driver: vfio-pci
sriov_dpdk:
- name: eth1
- bus_info: "18:00.1"
- device_info: "8086:158b:0200"
- driver: iavf
+ pci: "18:00.1"
+ pf_driver: i40e
+ vf_driver: iavf
+ device_roles:
+# qat:
+# - name: crypto01
+# pci: "0000:ab:00.0"
+# mod_type: qat_c62x
+# pci_type: c6xx
+# vfs: 4
features:
sriov:
enable: true
hugepages_2M: 10240
isolcpus:
enable: true
- cpus: "4-19,24-39,44-59,64-79"
+ autogenerate: true
+ cpus: "4-19,24-39,44-59,64-79" # Not used when autogenerate is true
nfd: true
cmk:
enable: true
tas:
enable: true
demo_policy: false
+ bond_cni: true
psp: true
+ qat:
+ enable: false
+ update_drivers: false
# deployment type for kuberef
deployment_type: "{{ lookup('env', 'DEPLOYMENT') }}"
+
+# OS distro from DISTRO from environment variables
+os_distro: "{{ lookup('env', 'DISTRO') }}"
##
-## Copyright (c) 2020 Intel Corporation.
+## Copyright (c) 2020-2021 Intel Corporation.
##
## Licensed under the Apache License, Version 2.0 (the "License");
## you may not use this file except in compliance with the License.
# Kubernetes version
kubernetes: true
-kube_version: v1.18.8
-#kube_version: v1.17.11
-#kube_version: v1.16.14
+#kube_version: v1.20.4
+kube_version: v1.19.8
+#kube_version: v1.18.16
# Run system-wide package update (apt dist-upgrade, yum update, ...)
# Note: enabling this may lead to unexpected results
# Tip: you can set this per host using host_vars
update_all_packages: false
+update_kernel: true
# Node Feature Discovery
nfd_enabled: {{ bmra.features.nfd }}
nfd_namespace: kube-system
nfd_sleep_interval: 60s
-# Intel CPU Manager for Kubernetes
+# Intel CPU Manager for Kubernetes (CMK)
cmk_enabled: {{ bmra.features.cmk.enable }}
cmk_namespace: kube-system
cmk_use_all_hosts: false # 'true' will deploy CMK on the controller nodes too
cmk_exclusive_num_cores: {{ bmra.features.cmk.num_exclusive_cores }} # number of CPU cores to be assigned to the "exclusive" pool on each of the nodes
# cmk_shared_mode: packed # choose between: packed, spread, default: packed
# cmk_exclusive_mode: packed # choose between: packed, spread, default: packed
+autogenerate_isolcpus: {{ bmra.features.isolcpus.autogenerate }}
# Native CPU Manager (Kubernetes built-in)
-# Note: Enabling CMK and built-in CPU Manager is not recommended.
+# Note: Enabling CMK and built-in Native CPU Manager is NOT recommended.
# Setting this option as "true" enables the "static" policy, otherwise the default "none" policy is used.
+# The reserved CPU cores settings are individual per each worker node, and therefore are available to configure in the host_vars file
native_cpu_manager_enabled: false
-# Amount of CPU cores that will be reserved for the housekeeping (2000m = 2000 millicores = 2 cores)
-native_cpu_manager_system_reserved_cpus: 2000m
-# Amount of CPU cores that will be reserved for Kubelet
-native_cpu_manager_kube_reserved_cpus: 1000m
-# Explicit list of the CPUs reserved from pods scheduling.
-# Note: Supported only with kube_version 1.17 and newer, overrides native_cpu_manager_system_reserved_cpus and native_cpu_manager_kube_reserved_cpus.
-#native_cpu_manager_reserved_cpus: "0,1,2"
-# Note: All reamining unreserved CPU cores will be consumed by the workloads.
# Enable Kubernetes built-in Topology Manager
topology_manager_enabled: {{ bmra.features.topology_manager.enable }}
"devices": ["1889"],
"drivers": ["vfio-pci"]
}
+ },
+ {
+ "resourceName": "intel_fpga",
+ "deviceType": "accelerator",
+ "selectors": {
+ "vendors": ["8086"],
+ "devices": ["0d90"]
+ }
}
]
}
# Intel QAT Device Plugin for Kubernetes
-qat_dp_enabled: false
+qat_dp_enabled: {{ bmra.features.qat.enable }}
qat_dp_namespace: kube-system
+qat_dp_build_image_locally: true
# Intel GPU Device Plugin for Kubernetes
gpu_dp_enabled: false
gpu_dp_namespace: kube-system
+gpu_dp_build_image_locally: true
+
+# Intel SGX Device Plugin for Kubernetes
+sgx_dp_enabled: false
+sgx_dp_build_image_locally: true
+# ProvisionLimit is a number of containers that can share
+# the same SGX provision device.
+sgx_dp_provision_limit: 20
+# EnclaveLimit is a number of containers that can share the
+# same SGX enclave device.
+sgx_dp_enclave_limit: 20
# Intel Telemetry Aware Scheduling
tas_enabled: {{ bmra.features.tas.enable }}
## Proxy configuration ##
#http_proxy: "http://proxy.example.com:1080"
#https_proxy: "http://proxy.example.com:1080"
-#additional_no_proxy: ".example.com"
+#additional_no_proxy: ".example.com,mirror_ip"
# (Ubuntu only) disables DNS stub listener which may cause issues on Ubuntu
dns_disable_stub_listener: false
kube_service_addresses: 10.233.0.0/18
kube_proxy_mode: iptables
+# comment this line out if you want to expose k8s services of type nodePort externally.
+kube_proxy_nodeport_addresses_cidr: 127.0.0.0/8
+
# please leave it set to "true", otherwise Intel BMRA features deployed as Helm charts won't be installed
helm_enabled: true
+# local Docker Hub mirror, if it exists
+#docker_registry_mirrors:
+# - http://mirror_ip:mirror_port
+
# Docker registry running on the cluster allows us to store images not avaialble on Docker Hub, e.g. CMK
registry_local_address: "localhost:30500"
{% for node in nodes %}
{{ idf.kubespray.hostnames[node.name] }} ansible_host={{ node.interfaces[idf.net_config[engine.pxe_network].interface].address }} ip={{ node.interfaces[idf.net_config[engine.pxe_network].interface].address }}
{% endfor %}
-localhost ansible_python_interpreter=/usr/bin/python2
+localhost ansible_connection=local ansible_python_interpreter=/usr/bin/python2
{% for role in ['kube-master', 'etcd', 'kube-node'] %}
[{{ role }}]
[calico-rr]
-{% if deployment_type == 'k8s' %}
+{% if os_distro|lower != 'centos7' %}
[all:vars]
ansible_python_interpreter=/usr/bin/python3
{% endif %}
##
-## Copyright (c) 2020 Intel Corporation.
+## Copyright (c) 2020-2021 Intel Corporation.
##
## Licensed under the Apache License, Version 2.0 (the "License");
## you may not use this file except in compliance with the License.
iommu_enabled: {{ bmra.features.sriov.enable }}
# dataplane interface configuration list
+{% if bmra.network_roles.sriov is defined or bmra.network_roles.sriov_dpdk is defined %}
dataplane_interfaces:
{% for intf in bmra.network_roles.sriov %}
- name: {{ intf.name }}
- bus_info: "{{ intf.bus_info }}"
- device_info: "{{ intf.device_info }}"
+ bus_info: "{{ intf.pci }}"
+ pf_driver: {{ intf.pf_driver }}
+ default_vf_driver: "{{ intf.vf_driver }}"
sriov_numvfs: {{ bmra.features.sriov.sriov_vfs_per_port }}
- vf_driver: {{ intf.driver }}
{% endfor %}
{% for intf in bmra.network_roles.sriov_dpdk %}
- name: {{ intf.name }}
- bus_info: "{{ intf.bus_info }}"
- device_info: "{{ intf.device_info }}"
+ bus_info: "{{ intf.pci }}"
+ pf_driver: {{ intf.pf_driver }}
+ default_vf_driver: "{{ intf.vf_driver }}"
sriov_numvfs: {{ bmra.features.sriov.sriov_dpdk_vfs_per_port }}
- vf_driver: {{ intf.driver }}
{% endfor %}
+{% else %}
+dataplane_interface: []
+{% endif %}
sriov_cni_enabled: {{ bmra.features.sriov_cni }}
# Bond CNI
-bond_cni_enabled: false
+bond_cni_enabled: {{ bmra.features.bond_cni }}
# Install DPDK (required for SR-IOV networking)
install_dpdk: true
+# DPDK version
+dpdk_version: "19.11.6"
+
+# Custom DPDK patches local path
+# dpdk_local_patches_dir: "/tmp/patches/dpdk-19.11.6"
+
# Userspace networking
userspace_cni_enabled: false
ovs_dpdk_enabled: false # Should be enabled with Userspace CNI, when VPP is set to "false"; 1G hugepages required
+ovs_version: "v2.13.0"
# CPU mask for OVS-DPDK PMD threads
ovs_dpdk_lcore_mask: 0x1
# Huge memory pages allocated by OVS-DPDK per NUMA node in megabytes
# install Intel x700 & x800 series NICs DDP packages
install_ddp_packages: false
-
-# set how many VFs per single QAT device PF should be created
-qat_sriov_numvfs: 16
+# set 'true' to enable custom ddp package to be loaded after reboot
+enable_ice_systemd_service: false
+# Enabling this feature will install QAT drivers + services
+update_qat_drivers: {{ bmra.features.qat.update_drivers }}
+
+# qat interface configuration list
+{% if bmra.device_roles.qat is defined %}
+qat_devices:
+{% for dev in bmra.device_roles.qat %}
+ - qat_dev: {{ dev.name }}
+ qat_id: "{{ dev.pci }}"
+ qat_module_type: {{ dev.mod_type }}
+ qat_pci_type: {{ dev.pci_type }}
+ qat_sriov_numvfs: {{ dev.vfs }}
+{% endfor %}
+{% else %}
+qat_devices: []
+{% endif %}
+# - qat_dev: crypto01 # Device name as separate QAT Symmetric Crypto devices on which qat_sriov_numvfs will be distributed
+# qat_id: "0000:ab:00.0" # Device QAT id one using DPDK compatible driver for VF devices to be used by vfio-pci kernel driver, replace as required
+# qat_module_type: qat_c62x # QAT Crypto Poll Mode Kernel Module supported are qat_dh895xcc,qat_c62x,qat_c3xxx,qat_200xx,qat_c4xxx,qat_d15xx
+# qat_pci_type: c6xx # QAT Crypto Poll Mode Pci Driver id supported are dh895xcc,c6xx,c3xxx,d15xx,200xx & c4xxx
+# qat_sriov_numvfs: 12 # set how many VFs per qat_id to be created such as c6xxvf support 32 so per device will be 10+10+12=32, replace as required
+ # Note: If don't want to assign VFs to id leave it as 0 such as qat_sriov_numvfs: 0
+# - qat_dev: crypto02
+# qat_id: "0000:xy:00.0"
+# qat_module_type: qat_c62x
+# qat_pci_type: c6xx
+# qat_sriov_numvfs: 10
+
+# - qat_dev: crypto03
+# qat_id: "0000:yz:00.0"
+# qat_module_type: qat_c62x
+# qat_pci_type: c6xx
+# qat_sriov_numvfs: 10
# Enables hugepages support
hugepages_enabled: {{ bmra.features.hugepages.enable }}
# CPU isolation from Linux scheduler
isolcpus_enabled: {{ bmra.features.isolcpus.enable }}
-isolcpus: "{{ bmra.features.isolcpus.cpus }}" # Update to match group_vars requested exclusive/shared cores
+# Disable CMKs autogenerate_isolcpus in group_vars to set custom isolcpus range; Otherwise this range will be automatically generated
+# If defining range and using CMK you must account group_vars requested exclusive/shared cores
+isolcpus: "{{ bmra.features.isolcpus.cpus }}"
-# Max number of processors to support (physical & logical cores)
-cpu_count: 144
+# Native CPU Manager (Kubernetes built-in)
+
+native_cpu_manager_system_reserved_cpus: 2000m
+# Amount of CPU cores that will be reserved for Kubelet
+native_cpu_manager_kube_reserved_cpus: 1000m
+# Explicit list of the CPUs reserved from pods scheduling.
+# Note: Supported only with kube_version 1.17 and newer, overrides native_cpu_manager_system_reserved_cpus and native_cpu_manager_kube_reserved_cpus.
+#native_cpu_manager_reserved_cpus: "0,1,2"
+# Note: All reamining unreserved CPU cores will be consumed by the workloads.
# Enable/Disable Intel PState scaling driver
intel_pstate_enabled: true
# [r] Revert cores to min/Turbo (set min/max to 800/3900)
clx_sst_bf_mode: s
+# Intel Speed Select Base-Frequency configuration for Ice Lake (ICX) Platforms.
+# [true] Enable Intel Speed Select Base Frequency (SST-BF)
+# [false] Disable Intel Speed Select Base Frequency (SST-BF)
+# Requires `sst_bf_configuration_enabled` variable to be 'true'
+icx_sst_bf_enabled: false
+# Prioritze (SST-CP) power flow to high frequency cores in case of CPU power constraints.
+icx_sst_bf_with_core_priority: false
+
+# SST CP config
+# Variables are only examples.
+# For more information, please visit:
+# https://www.kernel.org/doc/html/latest/admin-guide/pm/intel-speed-select.html#enable-clos-based-prioritization
+# Enabling this configuration overrides `icx_sst_bf_with_core_priority`.
+sst_cp_configuration_enabled: false
+sst_cp_priority_type: 0 # 0 - Proportional, 1 - Ordered
+sst_cp_clos_groups: # configure up to 4 CLOS groups
+ - id: 0
+ frequency_weight: 0 # used only with Proportional type
+ min_MHz: 0
+ max_MHz: 25500
+ - id: 1
+ frequency_weight: 0 # used only with Proportional type
+ min_MHz: 0
+ max_MHz: 25500
+ - id: 2
+ frequency_weight: 0 # used only with Proportional type
+ min_MHz: 0
+ max_MHz: 25500
+ - id: 3
+ frequency_weight: 0 # used only with Proportional type
+ min_MHz: 0
+ max_MHz: 25500
+sst_cp_cpu_clos:
+ - clos: 0
+ cpus: 1,2,4..6,8-10
+ - clos: 1
+ cpus: 3,7
+
+
# (CentOS 7 only) install real time kernel and related packages for flexran
install_real_time_package: false
+# Intel Software Guard Extensions (SGX)
+sgx_enabled: false
+
# Telemetry configuration
# intel_pmu plugin collects information provided by Linux perf interface.
enable_intel_pmu_plugin: false
--- /dev/null
+[ssh_connection]
+pipelining=True
+ssh_args = -o ControlMaster=auto -o ControlPersist=30m -o ConnectionAttempts=100 -o UserKnownHostsFile=/dev/null -o ServerAliveInterval=60 -o ServerAliveCountMax=10
+
+[defaults]
+force_valid_group_names = ignore
+display_skipped_hosts = no
+host_key_checking = False
+gathering = smart
+
+fact_caching = jsonfile
+fact_caching_connection = /tmp
+fact_caching_timeout = 7200
+
+action_plugins=./action_plugins:~/.ansible/plugins/action:/usr/share/ansible/plugins/action
--- /dev/null
+##
+## Copyright (c) 2020-2021 Intel Corporation.
+##
+## Licensed under the Apache License, Version 2.0 (the "License");
+## you may not use this file except in compliance with the License.
+## You may obtain a copy of the License at
+##
+## http://www.apache.org/licenses/LICENSE-2.0
+##
+## Unless required by applicable law or agreed to in writing, software
+## distributed under the License is distributed on an "AS IS" BASIS,
+## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+## See the License for the specific language governing permissions and
+## limitations under the License.
+##
+---
+- name: enable PowerTools repository on CentOS >= 8 and < 8.3
+# noqa 303 - yum is called intenionallly here
+ command: yum config-manager --set-enabled PowerTools
+ when:
+ - ansible_distribution == "CentOS"
+ - ansible_distribution_version >= '8' and ansible_distribution_version < '8.3'
+
+- name: enable PowerTools repository on CentOS >= 8.3
+# noqa 303 - yum is called intenionallly here
+ command: yum config-manager --set-enabled powertools
+ when:
+ - ansible_distribution == "CentOS"
+ - ansible_distribution_version >= '8.3'
+
+- name: enable CodeReady Linux Builder repository on RHEL 8
+ rhsm_repository:
+ name: codeready-builder-for-rhel-8-x86_64-rpms
+ when:
+ - ansible_distribution == "RedHat"
+ - ansible_distribution_version >= '8'
+
+- name: install epel-release on CentOS
+ package:
+ name: epel-release
+ when:
+ - ansible_distribution == "CentOS"
+
+- name: obtain EPEL GPG key on RHEL8
+ rpm_key:
+ state: present
+ key: https://dl.fedoraproject.org/pub/epel/RPM-GPG-KEY-EPEL-8
+ when:
+ - ansible_distribution == "RedHat"
+ - ansible_distribution_version >= '8'
+
+- name: install epel-release on RHEL8
+ package:
+ name: https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm
+ when:
+ - ansible_distribution == "RedHat"
+ - ansible_distribution_version >= '8'
+
+- name: get full distribution versions
+ command: cat /etc/redhat-release
+ register: release
+ changed_when: true
+
+- name: set full distribution version
+ set_fact:
+ full_dist_version: "{{ release.stdout | regex_replace('.*(\\d+.\\d+.\\d\\d\\d\\d).*', '\\1') }}"
+
+- name: update CentOS Vault yum repository on CentOS 7
+ yum_repository:
+ name: C{{ full_dist_version }}-base
+ description: CentOS-{{ full_dist_version }} - Base
+ file: CentOS-Vault
+ baseurl: http://vault.centos.org/{{ full_dist_version }}/os/$basearch/
+ gpgcheck: yes
+ gpgkey: file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-{{ ansible_distribution_major_version }}
+ enabled: yes
+ when:
+ - ansible_distribution == "CentOS"
+ - ansible_distribution_version < '7.9'
+ - not update_kernel
+
+#- name: update CentOS Vault yum repository on CentOS 8
+# yum_repository:
+# name: C{{ full_dist_version }}-base
+# description: CentOS-{{ full_dist_version }} - Base
+# file: CentOS-Vault
+# baseurl: http://vault.centos.org/{{ full_dist_version }}/BaseOS/$basearch/os/
+# baseurl: http://vault.centos.org/{{ full_dist_version }}/BaseOS/Source/
+# gpgcheck: yes
+# gpgkey: file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
+# enabled: yes
+# when:
+# - ansible_distribution == "CentOS"
+# - ansible_distribution_version >= '8' and ansible_distribution_version < '8.3'
+# - not update_kernel
+
+# CentOS-Vault repo not working for CentOS 8, so install kernel headers directly
+- name: pull matching kernel headers on CentOS 8.2
+ package:
+ name: "{{ item }}"
+ state: present
+ register: source_status
+ with_items:
+ - "https://vault.centos.org/8.2.2004/BaseOS/x86_64/os/Packages/kernel-headers-4.18.0-193.el8.x86_64.rpm"
+ - "https://vault.centos.org/8.2.2004/BaseOS/x86_64/os/Packages/kernel-devel-4.18.0-193.el8.x86_64.rpm"
+ when:
+ - ansible_distribution == "CentOS"
+ - ansible_distribution_version == '8.2'
+ - not update_kernel
+
+- name: pull matching kernel headers on CentOS 8.3
+ package:
+ name: "{{ item }}"
+ state: present
+ register: source_status
+ with_items:
+ - "http://mirror.centos.org/centos/8/BaseOS/x86_64/os/Packages/kernel-headers-4.18.0-240.el8.x86_64.rpm"
+ - "http://mirror.centos.org/centos/8/BaseOS/x86_64/os/Packages/kernel-devel-4.18.0-240.el8.x86_64.rpm"
+# - "https://vault.centos.org/8.3.2011/BaseOS/x86_64/os/Packages/kernel-headers-4.18.0-240.el8.x86_64.rpm"
+# - "https://vault.centos.org/8.3.2011/BaseOS/x86_64/os/Packages/kernel-devel-4.18.0-240.el8.x86_64.rpm"
+ when:
+ - ansible_distribution == "CentOS"
+ - ansible_distribution_version == '8.3'
+ - not update_kernel
+
+# pull the matching kernel headers if kernel is not updated
+- name: pull matching kernel headers from configured repos
+# noqa 503 - more than one condition, can't be a handler
+ package:
+ name:
+ - kernel-headers-{{ ansible_kernel }}
+ - kernel-devel-{{ ansible_kernel }}
+ register: kernel_source
+ retries: 3
+ until: kernel_source is success
+ when:
+ - not source_status.changed
+ - ansible_os_family == "RedHat"
+ - not update_kernel
+
+- name: install the 'Development tools' package group
+ package:
+ name: "@Development tools"
+ when:
+ - ansible_os_family == "RedHat"
+
+- name: install pip
+ package:
+ name: python-pip
+ when:
+ - ansible_distribution in ["RedHat", "CentOS"]
+ - ansible_distribution_version < '8'
+
+- name: install pip
+ package:
+ name: python3-pip
+ when:
+ - ansible_distribution in ["RedHat", "CentOS"]
+ - ansible_distribution_version >= '8'
+
+- name: update all packages
+ package:
+ name: '*'
+ state: latest # noqa 403
+ exclude: kernel*
+ when:
+ - ansible_os_family == "RedHat"
+ - update_all_packages | default(false)
+
+- name: update to the latest kernel and kernel headers on the Red Hat OS family
+ package:
+ name:
+ - kernel
+ - kernel-devel
+ state: latest # noqa 403
+ notify:
+ - reboot server
+ when:
+ - ansible_os_family == "RedHat"
+ - update_kernel | default(false)
+
+#note(przemeklal): fixes issue with missing selinux in packet.net CentOS 7 images
+- name: ensure selinux is installed on CentOS/RHEL 7
+ package:
+ name:
+ - policycoreutils
+ - policycoreutils-python
+ - selinux-policy
+ - selinux-policy-targeted
+ - libselinux-utils
+ - setools
+ - setools-console
+ - shtool
+ - lshw
+ state: present
+ when:
+ - ansible_distribution in ["RedHat", "CentOS"]
+ - ansible_distribution_version < '8'
+
+# Workaround for Equinix Metal CentOS 7
+- name: set selinux to permissive
+ lineinfile:
+ path: "/etc/sysconfig/selinux"
+ regexp: '^SELINUX=enforcing'
+ line: 'SELINUX=permissive'
+ when:
+ - ansible_distribution in ["RedHat", "CentOS"]
+ - ansible_distribution_version < '8'
+
+- name: Set python is python3
+ alternatives:
+ name: python
+ path: /usr/bin/python3
+ link: /usr/bin/python
+ when:
+ - ansible_distribution == 'CentOS' or ansible_distribution == 'RedHat'
+ - ansible_distribution_version >= '8'
+
+- name: install command line tools to collect hardware details
+ package:
+ name:
+ - hwinfo
+ - inxi
+ - jq
+ state: present
+ when: ansible_distribution in ["RedHat", "CentOS"]
##
-## Copyright (c) 2020 Intel Corporation.
+## Copyright (c) 2020-2021 Intel Corporation.
##
## Licensed under the Apache License, Version 2.0 (the "License");
## you may not use this file except in compliance with the License.
- name: Check that selected driver module is available
# if modinfo fails, lookup loaded modules as modinfo might return error
# for igb_uio and potentially other modules not included with the kernel
- shell: "modinfo {{ vf_driver }} || grep {{ vf_driver }} /proc/modules || grep {{ vf_driver }} /lib/modules/$(uname -r)/modules.builtin"
+ shell: "modinfo {{ vf_driver.value }} || grep {{ vf_driver.value }} /proc/modules || grep {{ vf_driver.value }} /lib/modules/$(uname -r)/modules.builtin"
register: shell_result
ignore_errors: yes
failed_when: no
changed_when: no
+ with_dict: "{{ item.sriov_vfs | default({}) | combine({'default': item.default_vf_driver}) }}"
+ loop_control:
+ loop_var: vf_driver
+
+- name: pre-create empty dict for VFs
+ set_fact:
+ vfs_acc: {}
+
+- name: populate VFs dict with values
+ set_fact:
+ vfs_acc: "{{ vfs_acc | combine({idx : item.default_vf_driver}) }}"
+ loop: "{{ range(item.sriov_numvfs | default(0) | int) | list }}"
+ loop_control:
+ index_var: idx
+ loop_var: vf_default
+
+- name: update VFs dict with default drivers
+ set_fact:
+ vfs_acc: "{{ vfs_acc | combine({vf.key | regex_replace('.*_(\\d*)', '\\1') | int : vf.value}) }}"
+ loop: "{{ item.sriov_vfs | default({}) | dict2items | sort(attribute='key') }}"
+ loop_control:
+ loop_var: vf
+ extended: yes
+ when: ansible_loop.index < (item.sriov_numvfs | default(0) | int )
# get a list of VFs PCI addresses and save the configuration
- name: attach VFs driver
block:
- name: fetch VFs pci addresses for a PF
- shell: "for vf in /sys/class/net/{{ pfname }}/device/virtfn*;do basename $(readlink -f $vf);done"
+ shell: "for vf in /sys/class/net/{{ item.name }}/device/virtfn*;do basename $(readlink -f $vf);done | sort"
register: vf_pciids
args:
executable: /bin/bash
- name: save VF driver binding
lineinfile:
path: "{{ sriov_config_path }}/bmra_interfaces"
- line: "{{ this_item }} {{ vf_driver }}"
- regexp: "^{{ this_item }}"
+ line: "{{ this_item[0] }} {{ this_item[1].value }}"
+ regexp: "^{{ this_item[0] }}"
create: yes
owner: root
group: root
mode: '0600'
- loop: "{{ vf_pciids.stdout_lines }}"
+ loop: "{{ vf_pciids.stdout_lines | zip(vfs_acc | dict2items) | list }}"
loop_control:
loop_var: this_item
when:
- vf_pciids.stderr|length == 0
- vf_pciids.stdout_lines|length > 0
- when: shell_result.rc == 0
+ when: shell_result.results | sum(attribute='rc') == 0
Code Review / kuberef.git / commitdiff