export VENDOR=${VENDOR:-ericsson-pod2}
export INSTALLER=bmra
+export BMRA_PROFILE=$(yq r $CURRENTPATH/hw_config/$VENDOR/idf.yaml bmra.profile)
# Deployment type. Supports "full" and "k8s"
export DEPLOYMENT=${DEPLOYMENT:-full}
done
}
-# Get IPs of target nodes (used for installing dependencies)
-get_target_ips() {
- yq r "$CURRENTPATH"/hw_config/"$VENDOR"/pdf.yaml nodes[*].interfaces[*].address
-}
-
# k8s Provisioning (currently BMRA)
provision_k8s() {
- ansible_cmd='/bin/bash -c "'
+ ansible_cmd="/bin/bash -c '"
if [[ "$DEPLOYMENT" == "k8s" ]]; then
ansible-playbook -i "$CURRENTPATH"/sw_config/bmra/inventory.ini "$CURRENTPATH"/playbooks/pre-install.yaml
- ansible_cmd+='pip install --upgrade pip==9.0.3; yum -y remove python-netaddr; pip install netaddr==0.7.19; '
+ ansible_cmd+="pip install --upgrade pip==9.0.3; pip install ansible==2.9.6;"
fi
- ansible_cmd+='ansible-playbook -i /bmra/inventory.ini /bmra/playbooks/cluster.yml"'
+ ansible_cmd+="ansible-playbook -i /bmra/inventory.ini /bmra/playbooks/k8s/patch_kubespray.yml; ansible-playbook -i /bmra/inventory.ini /bmra/playbooks/${BMRA_PROFILE}.yml'"
# shellcheck disable=SC2087
ssh -o StrictHostKeyChecking=no -tT "$USERNAME"@"$(get_vm_ip)" << EOF
done
fi
if [ ! -d "${PROJECT_ROOT}/container-experience-kits" ]; then
- git clone --recurse-submodules --depth 1 https://github.com/intel/container-experience-kits.git -b v1.4.1 ${PROJECT_ROOT}/container-experience-kits/
- cp -r ${PROJECT_ROOT}/container-experience-kits/examples/group_vars ${PROJECT_ROOT}/container-experience-kits/
+ git clone --recurse-submodules --depth 1 https://github.com/intel/container-experience-kits.git -b v2.0.0 ${PROJECT_ROOT}/container-experience-kits/
+ cp -r ${PROJECT_ROOT}/container-experience-kits/examples/${BMRA_PROFILE}/group_vars ${PROJECT_ROOT}/container-experience-kits/
#TODO Remove this once the reported issue is fixed in the next BMRA Release
if [[ "$DEPLOYMENT" == "full" ]]; then
sed -i '/\openshift/a \ extra_args: --ignore-installed PyYAML' \
${PROJECT_ROOT}/container-experience-kits/group_vars/
sudo docker run --rm \
-e ANSIBLE_CONFIG=/bmra/ansible.cfg \
+-e PROFILE=${BMRA_PROFILE} \
-v ${PROJECT_ROOT}/container-experience-kits:/bmra \
-v ~/.ssh/:/root/.ssh/ rihabbanday/bmra-install:centos \
${ansible_cmd}
MASTER_IP=$(get_host_pxe_ip "nodes[0]")
# shellcheck disable=SC2087
ssh -o StrictHostKeyChecking=no -tT "$USERNAME"@"$(get_vm_ip)" << EOF
-scp -q root@$MASTER_IP:/root/.kube/config ${PROJECT_ROOT}/kubeconfig
+scp -o StrictHostKeyChecking=no -q root@$MASTER_IP:/root/.kube/config ${PROJECT_ROOT}/kubeconfig
EOF
# Copy kubeconfig from Jump VM to appropriate location in Jump Host
# Direct scp to the specified location doesn't work due to permission/ssh-keys
- scp "$USERNAME"@"$(get_vm_ip)":"${PROJECT_ROOT}"/kubeconfig kubeconfig
- sudo cp kubeconfig /home/opnfv/functest-kubernetes/config
+ scp -o StrictHostKeyChecking=no "$USERNAME"@"$(get_vm_ip)":"${PROJECT_ROOT}"/kubeconfig kubeconfig
+ if [ -d "/home/opnfv/functest-kubernetes" ]; then
+ sudo cp kubeconfig /home/opnfv/functest-kubernetes/config
+ fi
}
# Executes a specific Ansible playbook
installers:
kubespray: *idf_kubespray
+
+bmra:
+ profile: full_nfv
+ network_roles:
+ sriov:
+ - name: eno2
+ bus_info: "19:00.1"
+ device_info: "8086:1572:0200"
+ driver: iavf
+ sriov_dpdk:
+ - name: eno4
+ bus_info: "19:00.3"
+ device_info: "8086:1572:0200"
+ driver: vfio-pci
+ features:
+ sriov:
+ enable: true
+ sriov_vfs_per_port: 2
+ sriov_dpdk_vfs_per_port: 4
+ sriov_cni: true
+ sriov_net_dp: true
+ hugepages:
+ enable: true
+ default: 2M
+ hugepages_1G: 0
+ hugepages_2M: 10240
+ isolcpus:
+ enable: true
+ cpus: "8-27,36-55"
+ nfd: true
+ cmk:
+ enable: true
+ num_shared_cores: 3
+ num_exclusive_cores: 3
+ topology_manager:
+ enable: true
+ policy: "best-effort"
+ tas:
+ enable: true
+ demo_policy: true
+ psp: true
##############################################################################
- name: Install requirements on nodes
- hosts: all
- gather_facts: true
+ hosts: all,!localhost
+ gather_facts: false
roles:
- role: pre-install
---
-- name: write BMRA config
+- name: Write BMRA inventory config
template:
- src: "inventory.ini"
+ src: "inventory.j2"
dest: "{{ kuberef_root }}/sw_config/bmra/inventory.ini"
+
+- name: Write BMRA kube-node config
+ template:
+ src: "kube-node.j2"
+ dest: "{{ kuberef_root }}/sw_config/bmra/kube-node.yml"
+
+- name: Write BMRA all config
+ template:
+ src: "all.j2"
+ dest: "{{ kuberef_root }}/sw_config/bmra/all.yml"
--- /dev/null
+##
+## Copyright (c) 2020 Intel Corporation.
+##
+## Licensed under the Apache License, Version 2.0 (the "License");
+## you may not use this file except in compliance with the License.
+## You may obtain a copy of the License at
+##
+## http://www.apache.org/licenses/LICENSE-2.0
+##
+## Unless required by applicable law or agreed to in writing, software
+## distributed under the License is distributed on an "AS IS" BASIS,
+## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+## See the License for the specific language governing permissions and
+## limitations under the License.
+##
+---
+## BMRA primary playbook variables ##
+
+# Kubernetes version
+kubernetes: true
+kube_version: v1.18.8
+#kube_version: v1.17.11
+#kube_version: v1.16.14
+
+# Run system-wide package update (apt dist-upgrade, yum update, ...)
+# Note: enabling this may lead to unexpected results
+# Tip: you can set this per host using host_vars
+update_all_packages: false
+
+# Node Feature Discovery
+nfd_enabled: {{ bmra.features.nfd }}
+nfd_build_image_locally: false
+nfd_namespace: kube-system
+nfd_sleep_interval: 60s
+
+# Intel CPU Manager for Kubernetes
+cmk_enabled: {{ bmra.features.cmk.enable }}
+cmk_namespace: kube-system
+cmk_use_all_hosts: false # 'true' will deploy CMK on the controller nodes too
+#cmk_hosts_list: node1,node2 # allows to control where CMK nodes will run, leave this option commented out to deploy on all K8s nodes
+cmk_shared_num_cores: {{ bmra.features.cmk.num_shared_cores }} # number of CPU cores to be assigned to the "shared" pool on each of the nodes
+cmk_exclusive_num_cores: {{ bmra.features.cmk.num_exclusive_cores }} # number of CPU cores to be assigned to the "exclusive" pool on each of the nodes
+# cmk_shared_mode: packed # choose between: packed, spread, default: packed
+# cmk_exclusive_mode: packed # choose between: packed, spread, default: packed
+
+# Native CPU Manager (Kubernetes built-in)
+# Note: Enabling CMK and built-in CPU Manager is not recommended.
+# Setting this option as "true" enables the "static" policy, otherwise the default "none" policy is used.
+native_cpu_manager_enabled: false
+# Amount of CPU cores that will be reserved for the housekeeping (2000m = 2000 millicores = 2 cores)
+native_cpu_manager_system_reserved_cpus: 2000m
+# Amount of CPU cores that will be reserved for Kubelet
+native_cpu_manager_kube_reserved_cpus: 1000m
+# Explicit list of the CPUs reserved from pods scheduling.
+# Note: Supported only with kube_version 1.17 and newer, overrides native_cpu_manager_system_reserved_cpus and native_cpu_manager_kube_reserved_cpus.
+#native_cpu_manager_reserved_cpus: "0,1,2"
+# Note: All reamining unreserved CPU cores will be consumed by the workloads.
+
+# Enable Kubernetes built-in Topology Manager
+topology_manager_enabled: {{ bmra.features.topology_manager.enable }}
+# There are four supported policies: none, best-effort, restricted, single-numa-node.
+topology_manager_policy: "{{ bmra.features.topology_manager.policy }}"
+
+# Intel SRIOV Network Device Plugin
+sriov_net_dp_enabled: {{ bmra.features.sriov_net_dp }}
+sriov_net_dp_namespace: kube-system
+# whether to build and store image locally or use one from public external registry
+sriov_net_dp_build_image_locally: false
+# SR-IOV network device plugin configuration.
+# For more information on supported configuration refer to: https://github.com/intel/sriov-network-device-plugin#configurations
+sriovdp_config_data: |
+ {
+ "resourceList": [{
+ "resourceName": "intel_sriov_netdevice",
+ "selectors": {
+ "vendors": ["8086"],
+ "devices": ["154c", "10ed", "1889"],
+ "drivers": ["iavf", "ixgbevf"]
+ }
+ },
+ {
+ "resourceName": "intel_sriov_dpdk_700_series",
+ "selectors": {
+ "vendors": ["8086"],
+ "devices": ["154c", "10ed"],
+ "drivers": ["vfio-pci"]
+ }
+ },
+ {
+ "resourceName": "intel_sriov_dpdk_800_series",
+ "selectors": {
+ "vendors": ["8086"],
+ "devices": ["1889"],
+ "drivers": ["vfio-pci"]
+ }
+ }
+ ]
+ }
+
+# Intel QAT Device Plugin for Kubernetes
+qat_dp_enabled: false
+qat_dp_namespace: kube-system
+
+# Intel GPU Device Plugin for Kubernetes
+gpu_dp_enabled: false
+gpu_dp_namespace: kube-system
+
+# Intel Telemetry Aware Scheduling
+tas_enabled: {{ bmra.features.tas.enable }}
+tas_namespace: monitoring
+# create and enable TAS demonstration policy: [true, false]
+tas_enable_demo_policy: {{ bmra.features.tas.demo_policy }}
+
+# Create reference net-attach-def objects
+example_net_attach_defs:
+ userspace_ovs_dpdk: false # Update to match host_vars CNI configuration
+ userspace_vpp: false # Update to match host_vars CNI configuration
+ sriov_net_dp: {{ bmra.features.sriov_net_dp }} # Update to match host_vars CNI configuration
+
+## Proxy configuration ##
+#http_proxy: "http://proxy.example.com:1080"
+#https_proxy: "http://proxy.example.com:1080"
+#additional_no_proxy: ".example.com"
+
+# (Ubuntu only) disables DNS stub listener which may cause issues on Ubuntu
+dns_disable_stub_listener: false
+
+# Kubernetes cluster name, also will be used as DNS domain
+cluster_name: cluster.local
+
+## Kubespray variables ##
+
+# default network plugins and kube-proxy configuration
+kube_network_plugin_multus: true
+multus_version: v3.4.2
+kube_network_plugin: flannel
+kube_pods_subnet: 10.244.0.0/16
+kube_service_addresses: 10.233.0.0/18
+kube_proxy_mode: iptables
+
+# please leave it set to "true", otherwise Intel BMRA features deployed as Helm charts won't be installed
+helm_enabled: true
+
+# Docker registry running on the cluster allows us to store images not avaialble on Docker Hub, e.g. CMK
+registry_local_address: "localhost:30500"
+
+# Enable Pod Security Policy. This option enables PSP admission controller and creates minimal set of rules.
+psp_enabled: {{ bmra.features.psp }}
+
+# Set image pull policy to Always. Pulls images prior to starting containers. Valid credentials must be configured.
+always_pull_enabled: true
+
+# Telemetry configuration
+collectd_scrap_interval: 30
{% for node in nodes %}
{{ idf.kubespray.hostnames[node.name] }} ansible_host={{ node.interfaces[idf.net_config[engine.pxe_network].interface].address }} ip={{ node.interfaces[idf.net_config[engine.pxe_network].interface].address }}
{% endfor %}
+localhost
{% for role in ['kube-master', 'etcd', 'kube-node'] %}
[{{ role }}]
kube-node
[calico-rr]
+
+[all:vars]
+ansible_python_interpreter=/usr/bin/python3
--- /dev/null
+##
+## Copyright (c) 2020 Intel Corporation.
+##
+## Licensed under the Apache License, Version 2.0 (the "License");
+## you may not use this file except in compliance with the License.
+## You may obtain a copy of the License at
+##
+## http://www.apache.org/licenses/LICENSE-2.0
+##
+## Unless required by applicable law or agreed to in writing, software
+## distributed under the License is distributed on an "AS IS" BASIS,
+## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+## See the License for the specific language governing permissions and
+## limitations under the License.
+##
+---
+# Kubernetes node configuration
+
+# Enable SR-IOV networking related setup
+sriov_enabled: {{ bmra.features.sriov.enable }}
+
+# SR-IOV PF specific configuration list
+sriov_nics:
+{% for intf in bmra.network_roles.sriov %}
+ - name: {{ intf.name }}
+ bus_info: "{{ intf.bus_info }}"
+ device_info: "{{ intf.device_info }}"
+ sriov_numvfs: {{ bmra.features.sriov.sriov_vfs_per_port }}
+ vf_driver: {{ intf.driver }}
+{% endfor %}
+{% for intf in bmra.network_roles.sriov_dpdk %}
+ - name: {{ intf.name }}
+ bus_info: "{{ intf.bus_info }}"
+ device_info: "{{ intf.device_info }}"
+ sriov_numvfs: {{ bmra.features.sriov.sriov_dpdk_vfs_per_port }}
+ vf_driver: {{ intf.driver }}
+{% endfor %}
+
+sriov_cni_enabled: {{ bmra.features.sriov_cni }}
+
+# Bond CNI
+bond_cni_enabled: false
+
+# install DPDK
+install_dpdk: true # DPDK installation is required for sriov_enabled:true; default to false
+
+# Userspace networking
+userspace_cni_enabled: false
+ovs_dpdk_enabled: false # Should be enabled with Userspace CNI, when VPP is set to "false"; 1G hugepages required
+# CPU mask for OVS-DPDK PMD threads
+ovs_dpdk_lcore_mask: 0x1
+# Huge memory pages allocated by OVS-DPDK per NUMA node in megabytes
+# example 1: "256,512" will allocate 256MB from node 0 abd 512MB from node 1
+# example 2: "1024" will allocate 1GB fron node 0 on a single socket board, e.g. in a VM
+ovs_dpdk_socket_mem: "256,0"
+vpp_enabled: false # Should be enabled with Userspace CNI, when ovs_dpdk is set to "false"; 2M hugepages required
+
+# Set to 'true' to update i40e, ice and iavf kernel modules
+update_nic_drivers: false
+
+# Set 'true' to update NIC firmware
+update_nic_firmware: false
+
+# Additional list of NIC interfaces that the FW update will be executed on
+# NOTE: FW update will be also executed on all NICs listed in "sriov_nics[*].name"
+firmware_update_nics:
+ - intf1
+ - intf2
+
+# install Intel x700 & x800 series NICs DDP packages
+install_ddp_packages: false
+
+# set how many VFs per single QAT device PF should be created
+qat_sriov_numvfs: 16
+
+# Enables hugepages support
+hugepages_enabled: {{ bmra.features.hugepages.enable }}
+
+# Hugepage sizes available: 2M, 1G
+default_hugepage_size: {{ bmra.features.hugepages.default }}
+
+# Sets how many hugepages of each size should be created
+hugepages_1G: {{ bmra.features.hugepages.hugepages_1G }}
+hugepages_2M: {{ bmra.features.hugepages.hugepages_2M }}
+
+# CPU isolation from Linux scheduler
+isolcpus_enabled: {{ bmra.features.isolcpus.enable }}
+isolcpus: "{{ bmra.features.isolcpus.cpus }}" # Update to match group_vars requested exclusive/shared cores
+
+# Max number of processors to support (physical & logical cores)
+cpu_count: 144
+
+# Enable/Disable Intel PState scaling driver
+intel_pstate_enabled: true
+# Config options for intel_pstate: disable, passive, force, no_hwp, hwp_only, support_acpi_ppc, per_cpu_perf_limits
+intel_pstate: disable
+# Enable/Disable Intel Turbo Boost PState attribute
+turbo_boost_enabled: false
+
+# Intel Speed Select Base-Frequency configuration.
+sst_bf_configuration_enabled: false
+
+# Intel Speed Select Base-Frequency configuration for Cascade Lake (CLX) Platforms.
+# CLX support of SST-BF requires 'intel_pstate' to be 'enabled'
+# Option clx_sst_bf_mode requires sst_bf_configuration_enabled to be set to 'true'.
+# There are three configuration modes:
+# [s] Set SST-BF config (set min/max to 2700/2700 and 2100/2100)
+# [m] Set P1 on all cores (set min/max to 2300/2300)
+# [r] Revert cores to min/Turbo (set min/max to 800/3900)
+clx_sst_bf_mode: s
+
+# (CentOS 7 only) install real time kernel and related packages for flexran
+install_real_time_package: false
+
+# Telemetry configuration
+# intel_pmu plugin collects information provided by Linux perf interface.
+enable_intel_pmu_plugin: false
+# CPU Threads to be monitored by Intel PMU Plugin.
+# If the field is empty, all available cores will be monitored.
+# Please refer to https://collectd.org/wiki/index.php/Plugin:Intel_PMU for configuration details.
+intel_pmu_plugin_monitored_cores: ""
+# CPU Threads to be monitored by Intel RDT Plugin.
+# If the field is empty, all available cores will be monitored.
+# Please refer to https://collectd.org/wiki/index.php/Plugin:IntelRDT for configuration details.
+intel_rdt_plugin_monitored_cores: ""
+
+# Additional list of plugins that will be excluded from collectd deployment.
+exclude_collectd_plugins: []
# http://www.apache.org/licenses/LICENSE-2.0
##############################################################################
+- name: Ensure Python3 is installed (Equinix Metal)
+ raw: yum install -y python3
+ when: lookup('env', 'VENDOR') == 'equinix-metal'
+
+- name: Gather facts
+ setup:
+
- name: Load distro variables
include_vars:
file: "{{ ansible_os_family }}.yml"
name: "{{ item }}"
state: present
with_items: "{{ bmra_pkgs }}"
+
+- name: Check if Python is present in PATH
+ shell: "which python"
+ register: pypath
+ failed_when: false
+
+- name: Check if /usr/bin/python exists
+ stat:
+ path: /usr/bin/python
+ register: pybin
+
+- name: Create symlink for Python
+ file:
+ src: /usr/bin/python3
+ dest: /usr/bin/python
+ state: link
+ when:
+ - not pybin.stat.exists
+ - pypath.rc != 0
- lshw
- pciutils
- ethtool
+ - python3
+ - 'dnf-command(config-manager)'
RUN yum -y update && \
yum -y install git epel-release python36 python-netaddr && \
yum -y install python-pip && \
- pip install ansible==2.7.16 jmespath && \
+ pip install ansible==2.9.6 jmespath && \
pip install jinja2 --upgrade
CMD ["bash"]
+++ /dev/null
----
-## BMRA master playbook variables ##
-
-# Node Feature Discovery
-nfd_enabled: false
-nfd_build_image_locally: false
-nfd_namespace: kube-system
-nfd_sleep_interval: 30s
-
-# Intel CPU Manager for Kubernetes
-cmk_enabled: false
-cmk_namespace: kube-system
-cmk_use_all_hosts: false # 'true' will deploy CMK on the master nodes too
-cmk_hosts_list: node1,node2 # allows to control where CMK nodes will run, leave this option commented out to deploy on all K8s nodes
-cmk_shared_num_cores: 2 # number of CPU cores to be assigned to the "shared" pool on each of the nodes
-cmk_exclusive_num_cores: 2 # number of CPU cores to be assigned to the "exclusive" pool on each of the nodes
-# cmk_shared_mode: packed # choose between: packed, spread, default: packed
-# cmk_exclusive_mode: packed # choose between: packed, spread, default: packed
-
-# Intel SRIOV Network Device Plugin
-sriov_net_dp_enabled: false
-sriov_net_dp_namespace: kube-system
-# whether to build and store image locally or use one from public external registry
-sriov_net_dp_build_image_locally: false
-# SR-IOV network device plugin configuration.
-# For more information on supported configuration refer to: https://github.com/intel/sriov-network-device-plugin#configurations
-sriovdp_config_data: |
- {
- "resourceList": [{
- "resourceName": "intel_sriov_netdevice",
- "selectors": {
- "vendors": ["8086"],
- "devices": ["154c", "10ed"],
- "drivers": ["iavf", "i40evf", "ixgbevf"]
- }
- },
- {
- "resourceName": "intel_sriov_dpdk",
- "selectors": {
- "vendors": ["8086"],
- "devices": ["154c", "10ed"],
- "drivers": ["vfio-pci"]
- }
- }
- ]
- }
-
-
-# Intel Device Plugins for Kubernetes
-qat_dp_enabled: false
-qat_dp_namespace: kube-system
-gpu_dp_enabled: false
-gpu_dp_namespace: kube-system
-
-# Intel Telemetry Aware Scheduling
-tas_enabled: false
-tas_namespace: default
-# create default TAS policy: [true, false]
-tas_create_policy: false
-
-# Create reference net-attach-def objects
-example_net_attach_defs:
- userspace_ovs_dpdk: false
- userspace_vpp: false
- sriov_net_dp: false
-
-## Proxy configuration ##
-# http_proxy: "http://proxy.example.com:1080"
-# https_proxy: "http://proxy.example.com:1080"
-# additional_no_proxy: ".example.com"
-
-# Topology Manager flags
-kubelet_node_custom_flags:
- - "--feature-gates=TopologyManager=true"
- - "--topology-manager-policy=none"
-
-# Kubernetes cluster name, also will be used as DNS domain
-cluster_name: cluster.local
-
-## Kubespray variables ##
-
-# default network plugins and kube-proxy configuration
-kube_network_plugin_multus: true
-multus_version: v3.3
-kube_network_plugin: flannel
-kube_pods_subnet: 10.244.0.0/16
-kube_service_addresses: 10.233.0.0/18
-kube_proxy_mode: iptables
-
-# please leave it set to "true", otherwise Intel BMRA features deployed as Helm charts won't be installed
-helm_enabled: true
-
-# Docker registry running on the cluster allows us to store images not avaialble on Docker Hub, e.g. CMK
-registry_enabled: true
-registry_storage_class: ""
-registry_local_address: "localhost:5000"
+++ /dev/null
----
-# Kubernetes node configuration
-
-# Enable SR-IOV networking related setup
-sriov_enabled: false
-
-# sriov_nics: SR-IOV PF specific configuration list
-sriov_nics:
- - name: enp24s0f0 # PF interface names
- sriov_numvfs: 2 # number of VFs to create for this PF(enp24s0f0)
- vf_driver: vfio-pci # VF driver to be attached for all VFs under this PF(enp24s0f0), "i40evf", "iavf", "vfio-pci", "igb_uio"
- ddp_profile: "gtp.pkgo" # DDP package name to be loaded into the NIC
- - name: enp24s0f1
- sriov_numvfs: 4
- vf_driver: iavf
-
-sriov_cni_enabled: false
-
-# install DPDK
-install_dpdk: false # DPDK installation is required for sriov_enabled:true; default to false
-
-userspace_cni_enabled: false
-
-# Intel Bond CNI Plugin
-bond_cni_enabled: false
-
-vpp_enabled: false
-ovs_dpdk_enabled: false
-# CPU mask for OVS-DPDK PMD threads
-ovs_dpdk_lcore_mask: 0x1
-# Huge memory pages allocated by OVS-DPDK per NUMA node in megabytes
-# example 1: "256,512" will allocate 256MB from node 0 abd 512MB from node 1
-# example 2: "1024" will allocate 1GB fron node 0 on a single socket board, e.g. in a VM
-ovs_dpdk_socket_mem: "256,0"
-
-# Set to 'true' to update i40e and i40evf kernel modules
-force_nic_drivers_update: false
-
-# install Intel x700 & x800 series NICs DDP packages
-install_ddp_packages: false
-
-# Enables hugepages support
-hugepages_enabled: false
-
-# Hugepage sizes available: 2M, 1G
-default_hugepage_size: 1G
-
-# Sets how many hugepages of each size should be created
-hugepages_1G: 4
-hugepages_2M: 0
-
-# CPU isolation from Linux scheduler
-isolcpus_enabled: false
-isolcpus: "4-7"
-
-# Intel CommsPowerManagement
-sst_bf_configuration_enabled: false
-# Option sst_bf_mode requires sst_bf_configuration_enabled to be set to 'true'.
-# There are three configuration modes:
-# [s] Set SST-BF config (set min/max to 2700/2700 and 2100/2100)
-# [m] Set P1 on all cores (set min/max to 2300/2300)
-# [r] Revert cores to min/Turbo (set min/max to 800/3900)
-sst_bf_mode: s
Code Review / kuberef.git / commitdiff