+++ /dev/null
-Copyright 2015 Open Platform for NFV Project, Inc. and its contributors
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
See the License for the specific language governing permissions and
limitations under the License.
-Other applicable upstream project Licenses relevant for Fuel@OPNFV
+Other applicable upstream project Licenses
==================================================================
You may not use the content of this software bundle except in compliance with the
Licenses as listed below:
| Linux | GPLv3 |
| | https://www.gnu.org/copyleft/gpl.html |
+----------------+-----------------------------------------------------+
+| Ceph | GPL v2 |
+| | https://www.gnu.org/licenses/gpl-2.0.html |
++----------------+-----------------------------------------------------+
+| Puppet | Apache License 2.0 |
+| | https://www.apache.org/licenses/LICENSE-2.0 |
++----------------+-----------------------------------------------------+
+
+Other applicable upstream project Licenses used by Fuel ISO
+==================================================================
+You may not use the content of this software bundle except in compliance with the
+Licenses as listed below:
+
++----------------+-----------------------------------------------------+
+| **Component** | **Licence** |
++----------------+-----------------------------------------------------+
| Docker | Apache License 2.0 |
-| | https://www.apache.org/licenses/LICENSE-2.0
+| | https://www.apache.org/licenses/LICENSE-2.0 |
+----------------+-----------------------------------------------------+
| Fuel | Apache License 2.0 |
| | https://www.apache.org/licenses/LICENSE-2.0 |
| OpenJDK/JRE | GPL v2 |
| | https://www.gnu.org/licenses/gpl-2.0.html |
+----------------+-----------------------------------------------------+
-| Ceph | GPL v2 |
-| | https://www.gnu.org/licenses/gpl-2.0.html |
-+----------------+-----------------------------------------------------+
-| Puppet | Apache License 2.0 |
-| | https://www.apache.org/licenses/LICENSE-2.0 |
-+----------------+-----------------------------------------------------+
| Cobbler | GPL v2 |
| | https://www.gnu.org/licenses/gpl-2.0.html |
+----------------+-----------------------------------------------------+
| | https://www.apache.org/licenses/LICENSE-2.0 |
+----------------+-----------------------------------------------------+
+Other applicable upstream project Licenses used by Foreman ISO
+==================================================================
+You may not use the content of this software bundle except in compliance with the
+Licenses as listed below:
+
++----------------+-----------------------------------------------------+
+| **Component** | **Licence** |
++----------------+-----------------------------------------------------+
+| Foreman | Creative Commons Attribution-ShareAlike 3.0 |
+| | http://creativecommons.org/licenses/by-sa/3.0/ |
++----------------+-----------------------------------------------------+
+| VirtualBox | GPL v2 |
+| | https://www.gnu.org/licenses/gpl-2.0.html |
++----------------+-----------------------------------------------------+
+| Vagrant | The MIT License
++----------------+-----------------------------------------------------+
+| Ansible | GPL v3 |
+| | https://www.gnu.org/licenses/gpl-3.0.html |
++----------------+-----------------------------------------------------+
+| Khaleesi | GPL v3 |
+| | https://www.gnu.org/licenses/gpl-3.0.html |
++----------------+-----------------------------------------------------+
--- /dev/null
+#!/usr/bin/env bash
+
+#Clean script to uninstall provisioning server for Foreman/QuickStack
+#author: Tim Rozet (trozet@redhat.com)
+#
+#Uses Vagrant and VirtualBox
+#
+#Destroys Vagrant VM running in /tmp/bgs_vagrant
+#Shuts down all nodes found in Khaleesi settings
+#Removes hypervisor kernel modules (VirtualBox)
+
+##VARS
+reset=`tput sgr0`
+blue=`tput setaf 4`
+red=`tput setaf 1`
+green=`tput setaf 2`
+##END VARS
+
+##FUNCTIONS
+display_usage() {
+ echo -e "\n\n${blue}This script is used to uninstall Foreman/QuickStack Installer and Clean OPNFV Target System${reset}\n\n"
+ echo -e "\nUsage:\n$0 [arguments] \n"
+ echo -e "\n -no_parse : No variable parsing into config. Flag. \n"
+ echo -e "\n -base_config : Full path of ksgen settings file to parse. Required. Will provide BMC info to shutdown hosts. Example: -base_config /opt/myinventory.yml \n"
+}
+
+##END FUNCTIONS
+
+if [[ ( $1 == "--help") || $1 == "-h" ]]; then
+ display_usage
+ exit 0
+fi
+
+echo -e "\n\n${blue}This script is used to uninstall Foreman/QuickStack Installer and Clean OPNFV Target System${reset}\n\n"
+echo "Use -h to display help"
+sleep 2
+
+while [ "`echo $1 | cut -c1`" = "-" ]
+do
+ echo $1
+ case "$1" in
+ -base_config)
+ base_config=$2
+ shift 2
+ ;;
+ *)
+ display_usage
+ exit 1
+ ;;
+esac
+done
+
+
+##install ipmitool
+if ! yum list installed | grep -i ipmitool; then
+ if ! yum -y install ipmitool; then
+ echo "${red}Unable to install ipmitool!${reset}"
+ exit 1
+ fi
+else
+ echo "${blue}Skipping ipmitool as it is already installed!${reset}"
+fi
+
+###find all the bmc IPs and number of nodes
+node_counter=0
+output=`grep bmc_ip $base_config | grep -Eo '[0-9]+.[0-9]+.[0-9]+.[0-9]+'`
+for line in ${output} ; do
+ bmc_ip[$node_counter]=$line
+ ((node_counter++))
+done
+
+max_nodes=$((node_counter-1))
+
+###find bmc_users per node
+node_counter=0
+output=`grep bmc_user $base_config | sed 's/\s*bmc_user:\s*//'`
+for line in ${output} ; do
+ bmc_user[$node_counter]=$line
+ ((node_counter++))
+done
+
+###find bmc_pass per node
+node_counter=0
+output=`grep bmc_pass $base_config | sed 's/\s*bmc_pass:\s*//'`
+for line in ${output} ; do
+ bmc_pass[$node_counter]=$line
+ ((node_counter++))
+done
+
+for mynode in `seq 0 $max_nodes`; do
+ echo "${blue}Node: ${bmc_ip[$mynode]} ${bmc_user[$mynode]} ${bmc_pass[$mynode]} ${reset}"
+ if ipmitool -I lanplus -P ${bmc_pass[$mynode]} -U ${bmc_user[$mynode]} -H ${bmc_ip[$mynode]} chassis power off; then
+ echo "${blue}Node: $mynode, ${bmc_ip[$mynode]} powered off!${reset}"
+ else
+ echo "${red}Error: Unable to power off $mynode, ${bmc_ip[$mynode]} ${reset}"
+ exit 1
+ fi
+done
+
+###check to see if vbox is installed
+vboxpkg=`rpm -qa | grep VirtualBox`
+if [ $? -eq 0 ]; then
+ skip_vagrant=0
+else
+ skip_vagrant=1
+fi
+
+###destroy vagrant
+if [ $skip_vagrant -eq 0 ]; then
+ cd /tmp/bgs_vagrant
+ if vagrant destroy -f; then
+ echo "${blue}Successfully destroyed Foreman VM ${reset}"
+ else
+ echo "${red}Unable to destroy Foreman VM ${reset}"
+ echo "${blue}Checking if vagrant was already destroyed and no process is active...${reset}"
+ if ps axf | grep vagrant; then
+ echo "${red}Vagrant VM still exists...exiting ${reset}"
+ exit 1
+ else
+ echo "${blue}Vagrant process doesn't exist. Moving on... ${reset}"
+ fi
+ fi
+
+ ###kill virtualbox
+ echo "${blue}Killing VirtualBox ${reset}"
+ killall virtualbox
+ killall VboxHeadless
+
+ ###remove virtualbox
+ echo "${blue}Removing VirtualBox ${reset}"
+ yum -y remove $vboxpkg
+
+else
+ echo "${blue}Skipping Vagrant destroy + Vbox Removal as VirtualBox package is already removed ${reset}"
+fi
+
+
+###remove kernel modules
+echo "${blue}Removing kernel modules ${reset}"
+for kernel_mod in vboxnetadp vboxnetflt vboxpci vboxdrv; do
+ if ! rmmod $kernel_mod; then
+ if rmmod $kernel_mod 2>&1 | grep -i 'not currently loaded'; then
+ echo "${blue} $kernel_mod is not currently loaded! ${reset}"
+ else
+ echo "${red}Error trying to remove Kernel Module: $kernel_mod ${reset}"
+ exit 1
+ fi
+ else
+ echo "${blue}Removed Kernel Module: $kernel_mod ${reset}"
+ fi
+done
red=`tput setaf 1`
green=`tput setaf 2`
+declare -A interface_arr
##END VARS
##FUNCTIONS
printf '%s\n' 'deploy.sh: Skipping kernel module for virtualbox. Already Installed'
fi
+##install Ansible
+if ! yum list installed | grep -i ansible; then
+ if ! yum -y install ansible; then
+ printf '%s\n' 'deploy.sh: Unable to install Ansible package' >&2
+ exit 1
+ fi
+fi
+
##install Vagrant
if ! rpm -qa | grep vagrant; then
if ! rpm -Uvh https://dl.bintray.com/mitchellh/vagrant/vagrant_1.7.2_x86_64.rpm; then
echo "${blue}Detecting network configuration...${reset}"
##detect host 1 or 3 interface configuration
#output=`ip link show | grep -E "^[0-9]" | grep -Ev ": lo|tun|virbr|vboxnet" | awk '{print $2}' | sed 's/://'`
-output=`ifconfig | grep -E "^[a-Z0-9]+:"| grep -Ev "lo|tun|virbr|vboxnet:" | awk '{print $1}' | sed 's/://'`
+output=`ifconfig | grep -E "^[a-zA-Z0-9]+:"| grep -Ev "lo|tun|virbr|vboxnet" | awk '{print $1}' | sed 's/://'`
if [ ! "$output" ]; then
printf '%s\n' 'deploy.sh: Unable to detect interfaces to bridge to' >&2
if [ ! "$new_ip" ]; then
continue
fi
+ interface_arr[$interface]=$if_counter
interface_ip_arr[$if_counter]=$new_ip
subnet_mask=$(find_netmask $interface)
if [ "$if_counter" -eq 1 ]; then
echo "${blue}Network detected: ${deployment_type}! ${reset}"
if route | grep default; then
- defaultgw=$(route | grep default | awk '{print $2}')
- echo "${blue}Default gateway detected: $defaultgw ${reset}"
- sed -i 's/^.*default_gw =.*$/ default_gw = '\""$defaultgw"\"'/' Vagrantfile
+ echo "${blue}Default Gateway Detected ${reset}"
+ host_default_gw=$(ip route | grep default | awk '{print $3}')
+ echo "${blue}Default Gateway: $host_default_gw ${reset}"
+ default_gw_interface=$(ip route get $host_default_gw | awk '{print $3}')
+ case "${interface_arr[$default_gw_interface]}" in
+ 0)
+ echo "${blue}Default Gateway Detected on Admin Interface!${reset}"
+ sed -i 's/^.*default_gw =.*$/ default_gw = '\""$host_default_gw"\"'/' Vagrantfile
+ node_default_gw=$host_default_gw
+ ;;
+ 1)
+ echo "${red}Default Gateway Detected on Private Interface!${reset}"
+ echo "${red}Private subnet should be private and not have Internet access!${reset}"
+ exit 1
+ ;;
+ 2)
+ echo "${blue}Default Gateway Detected on Public Interface!${reset}"
+ sed -i 's/^.*default_gw =.*$/ default_gw = '\""$host_default_gw"\"'/' Vagrantfile
+ echo "${blue}Will setup NAT from Admin -> Public Network on VM!${reset}"
+ sed -i 's/^.*nat_flag =.*$/ nat_flag = true/' Vagrantfile
+ echo "${blue}Setting node gateway to be VM Admin IP${reset}"
+ node_default_gw=${interface_ip_arr[0]}
+ ;;
+ 3)
+ echo "${red}Default Gateway Detected on Storage Interface!${reset}"
+ echo "${red}Storage subnet should be private and not have Internet access!${reset}"
+ exit 1
+ ;;
+ *)
+ echo "${red}Unable to determine which interface default gateway is on..Exiting!${reset}"
+ exit 1
+ ;;
+ esac
else
- defaultgw=`echo ${interface_arr_ip[0]} | cut -d. -f1-3`
+ #assumes 24 bit mask
+ defaultgw=`echo ${interface_ip_arr[0]} | cut -d. -f1-3`
firstip=.1
defaultgw=$defaultgw$firstip
echo "${blue}Unable to find default gateway. Assuming it is $defaultgw ${reset}"
sed -i 's/^.*default_gw =.*$/ default_gw = '\""$defaultgw"\"'/' Vagrantfile
+ node_default_gw=$defaultgw
fi
if [ $base_config ]; then
##if single node deployment all the variables will have the same ip
##interface names will be enp0s3, enp0s8, enp0s9 in chef/centos7
-sed -i 's/^.*default_gw:.*$/default_gw:'" $defaultgw"'/' opnfv_ksgen_settings.yml
+sed -i 's/^.*default_gw:.*$/default_gw:'" $node_default_gw"'/' opnfv_ksgen_settings.yml
##replace private interface parameter
##private interface will be of hosts, so we need to know the provisioned host interface name
--- /dev/null
+global_params:
+ admin_email: opnfv@opnfv.com
+ ha_flag: "true"
+ odl_flag: "true"
+ private_network:
+ storage_network:
+ controllers_hostnames_array: oscontroller1,oscontroller2,oscontroller3
+ controllers_ip_array:
+ amqp_vip:
+ private_subnet:
+ cinder_admin_vip:
+ cinder_private_vip:
+ cinder_public_vip:
+ db_vip:
+ glance_admin_vip:
+ glance_private_vip:
+ glance_public_vip:
+ heat_admin_vip:
+ heat_private_vip:
+ heat_public_vip:
+ heat_cfn_admin_vip:
+ heat_cfn_private_vip:
+ heat_cfn_public_vip:
+ horizon_admin_vip:
+ horizon_private_vip:
+ horizon_public_vip:
+ keystone_admin_vip:
+ keystone_private_vip:
+ keystone_public_vip:
+ loadbalancer_vip:
+ neutron_admin_vip:
+ neutron_private_vip:
+ neutron_public_vip:
+ nova_admin_vip:
+ nova_private_vip:
+ nova_public_vip:
+network_type: multi_network
+default_gw:
+foreman:
+ seed_values:
+ - { name: heat_cfn, oldvalue: true, newvalue: false }
+workaround_puppet_version_lock: false
+opm_branch: master
+installer:
+ name: puppet
+ short_name: pupt
+ network:
+ auto_assign_floating_ip: false
+ variant:
+ short_name: m2vx
+ plugin:
+ name: neutron
+workaround_openstack_packstack_rpm: false
+tempest:
+ repo:
+ Fedora:
+ '19': http://REPLACE_ME/~REPLACE_ME/openstack-tempest-icehouse/fedora-19/
+ '20': http://REPLACE_ME/~REPLACE_ME/openstack-tempest-icehouse/fedora-20/
+ RedHat:
+ '7.0': https://repos.fedorapeople.org/repos/openstack/openstack-juno/epel-7/
+ use_virtual_env: false
+ public_allocation_end: 10.2.84.71
+ skip:
+ files: null
+ tests: null
+ public_allocation_start: 10.2.84.51
+ physnet: physnet1
+ use_custom_repo: false
+ public_subnet_cidr: 10.2.84.0/24
+ public_subnet_gateway: 10.2.84.1
+ additional_default_settings:
+ - section: compute
+ option: flavor_ref
+ value: 1
+ cirros_image_file: cirros-0.3.1-x86_64-disk.img
+ setup_method: tempest/rpm
+ test_name: all
+ rdo:
+ version: juno
+ rpm: http://repos.fedorapeople.org/repos/openstack/openstack-juno/rdo-release-juno-1.noarch.rpm
+ rpm:
+ version: 20141201
+ dir: ~{{ nodes.tempest.remote_user }}/tempest-dir
+tmp:
+ node_prefix: '{{ node.prefix | reject("none") | join("-") }}-'
+ anchors:
+ - https://repos.fedorapeople.org/repos/openstack/openstack-juno/rdo-release-juno-1.noarch.rpm
+ - http://repos.fedorapeople.org/repos/openstack/openstack-juno/
+opm_repo: https://github.com/redhat-openstack/openstack-puppet-modules.git
+workaround_vif_plugging: false
+openstack_packstack_rpm: http://REPLACE_ME/brewroot/packages/openstack-puppet-modules/2013.2/9.el6ost/noarch/openstack-puppet-modules-2013.2-9.el6ost.noarch.rpm
+nodes:
+ compute1:
+ name: oscompute11.opnfv.com
+ hostname: oscompute11.opnfv.com
+ short_name: oscompute11
+ type: compute
+ host_type: baremetal
+ hostgroup: Compute
+ mac_address: "00:25:b5:a0:00:5e"
+ bmc_ip: 172.30.8.74
+ bmc_mac: "74:a2:e6:a4:14:9c"
+ bmc_user: admin
+ bmc_pass: octopus
+ ansible_ssh_pass: "Op3nStack"
+ admin_password: ""
+ groups:
+ - compute
+ - foreman_nodes
+ - puppet
+ - rdo
+ - neutron
+ compute2:
+ name: oscompute12.opnfv.com
+ hostname: oscompute12.opnfv.com
+ short_name: oscompute12
+ type: compute
+ host_type: baremetal
+ hostgroup: Compute
+ mac_address: "00:25:b5:a0:00:3e"
+ bmc_ip: 172.30.8.73
+ bmc_mac: "a8:9d:21:a0:15:9c"
+ bmc_user: admin
+ bmc_pass: octopus
+ ansible_ssh_pass: "Op3nStack"
+ admin_password: ""
+ groups:
+ - compute
+ - foreman_nodes
+ - puppet
+ - rdo
+ - neutron
+ controller1:
+ name: oscontroller1.opnfv.com
+ hostname: oscontroller1.opnfv.com
+ short_name: oscontroller1
+ type: controller
+ host_type: baremetal
+ hostgroup: Controller_Network_ODL
+ mac_address: "00:25:b5:a0:00:af"
+ bmc_ip: 172.30.8.66
+ bmc_mac: "a8:9d:21:c9:8b:56"
+ bmc_user: admin
+ bmc_pass: octopus
+ private_ip: controller1_private
+ private_mac: "00:25:b5:b0:00:1f"
+ ansible_ssh_pass: "Op3nStack"
+ admin_password: "octopus"
+ groups:
+ - controller
+ - foreman_nodes
+ - puppet
+ - rdo
+ - neutron
+ controller2:
+ name: oscontroller2.opnfv.com
+ hostname: oscontroller2.opnfv.com
+ short_name: oscontroller2
+ type: controller
+ host_type: baremetal
+ hostgroup: Controller_Network
+ mac_address: "00:25:b5:a0:00:9e"
+ bmc_ip: 172.30.8.75
+ bmc_mac: "a8:9d:21:c9:4d:26"
+ bmc_user: admin
+ bmc_pass: octopus
+ private_ip: controller2_private
+ private_mac: "00:25:b5:b0:00:de"
+ ansible_ssh_pass: "Op3nStack"
+ admin_password: "octopus"
+ groups:
+ - controller
+ - foreman_nodes
+ - puppet
+ - rdo
+ - neutron
+ controller3:
+ name: oscontroller3.opnfv.com
+ hostname: oscontroller3.opnfv.com
+ short_name: oscontroller3
+ type: controller
+ host_type: baremetal
+ hostgroup: Controller_Network
+ mac_address: "00:25:b5:a0:00:7e"
+ bmc_ip: 172.30.8.65
+ bmc_mac: "a8:9d:21:c9:3a:92"
+ bmc_user: admin
+ bmc_pass: octopus
+ private_ip: controller3_private
+ private_mac: "00:25:b5:b0:00:be"
+ ansible_ssh_pass: "Op3nStack"
+ admin_password: "octopus"
+ groups:
+ - controller
+ - foreman_nodes
+ - puppet
+ - rdo
+ - neutron
+workaround_mysql_centos7: true
+distro:
+ name: centos
+ centos:
+ '7.0':
+ repos: []
+ short_name: c
+ short_version: 70
+ version: '7.0'
+ rhel:
+ '7.0':
+ kickstart_url: http://REPLACE_ME/released/RHEL-7/7.0/Server/x86_64/os/
+ repos:
+ - section: rhel7-server-rpms
+ name: Packages for RHEL 7 - $basearch
+ baseurl: http://REPLACE_ME/rel-eng/repos/rhel-7.0/x86_64/
+ gpgcheck: 0
+ - section: rhel-7-server-update-rpms
+ name: Update Packages for Enterprise Linux 7 - $basearch
+ baseurl: http://REPLACE_ME/rel-eng/repos/rhel-7.0-z/x86_64/
+ gpgcheck: 0
+ - section: rhel-7-server-optional-rpms
+ name: Optional Packages for Enterprise Linux 7 - $basearch
+ baseurl: http://REPLACE_ME/released/RHEL-7/7.0/Server-optional/x86_64/os/
+ gpgcheck: 0
+ - section: rhel-7-server-extras-rpms
+ name: Optional Packages for Enterprise Linux 7 - $basearch
+ baseurl: http://REPLACE_ME/rel-eng/EXTRAS-7.0-RHEL-7-20140610.0/compose/Server/x86_64/os/
+ gpgcheck: 0
+ '6.5':
+ kickstart_url: http://REPLACE_ME/released/RHEL-6/6.5/Server/x86_64/os/
+ repos:
+ - section: rhel6.5-server-rpms
+ name: Packages for RHEL 6.5 - $basearch
+ baseurl: http://REPLACE_ME.REPLACE_ME/released/RHEL-6/6.5/Server/$basearch/os/Server
+ gpgcheck: 0
+ - section: rhel-6.5-server-update-rpms
+ name: Update Packages for Enterprise Linux 6.5 - $basearch
+ baseurl: http://REPLACE_ME.REPLACE_ME/rel-eng/repos/RHEL-6.5-Z/$basearch/
+ gpgcheck: 0
+ - section: rhel-6.5-server-optional-rpms
+ name: Optional Packages for Enterprise Linux 6.5 - $basearch
+ baseurl: http://REPLACE_ME.REPLACE_ME/released/RHEL-6/6.5/Server/optional/$basearch/os
+ gpgcheck: 0
+ - section: rhel6.5-server-rpms-32bit
+ name: Packages for RHEL 6.5 - i386
+ baseurl: http://REPLACE_ME.REPLACE_ME/released/RHEL-6/6.5/Server/i386/os/Server
+ gpgcheck: 0
+ enabled: 1
+ - section: rhel-6.5-server-update-rpms-32bit
+ name: Update Packages for Enterprise Linux 6.5 - i686
+ baseurl: http://REPLACE_ME.REPLACE_ME/rel-eng/repos/RHEL-6.5-Z/i686/
+ gpgcheck: 0
+ enabled: 1
+ - section: rhel-6.5-server-optional-rpms-32bit
+ name: Optional Packages for Enterprise Linux 6.5 - i386
+ baseurl: http://REPLACE_ME.REPLACE_ME/released/RHEL-6/6.5/Server/optional/i386/os
+ gpgcheck: 0
+ enabled: 1
+ subscription:
+ username: REPLACE_ME
+ password: HWj8TE28Qi0eP2c
+ pool: 8a85f9823e3d5e43013e3ddd4e2a0977
+ config:
+ selinux: permissive
+ ntp_server: 0.pool.ntp.org
+ dns_servers:
+ - 10.4.1.1
+ - 10.4.0.2
+ reboot_delay: 1
+ initial_boot_timeout: 180
+node:
+ prefix:
+ - rdo
+ - pupt
+ - ffqiotcxz1
+ - null
+product:
+ repo_type: production
+ name: rdo
+ short_name: rdo
+ rpm:
+ CentOS: https://repos.fedorapeople.org/repos/openstack/openstack-juno/rdo-release-juno-1.noarch.rpm
+ Fedora: https://repos.fedorapeople.org/repos/openstack/openstack-juno/rdo-release-juno-1.noarch.rpm
+ RedHat: https://repos.fedorapeople.org/repos/openstack/openstack-juno/rdo-release-juno-1.noarch.rpm
+ short_version: ju
+ repo:
+ production:
+ CentOS:
+ 7.0.1406: http://repos.fedorapeople.org/repos/openstack/openstack-juno/epel-7
+ '6.5': http://repos.fedorapeople.org/repos/openstack/openstack-juno/epel-6
+ '7.0': http://repos.fedorapeople.org/repos/openstack/openstack-juno/epel-7
+ Fedora:
+ '20': http://repos.fedorapeople.org/repos/openstack/openstack-juno/fedora-20
+ '21': http://repos.fedorapeople.org/repos/openstack/openstack-juno/fedora-21
+ RedHat:
+ '6.6': http://repos.fedorapeople.org/repos/openstack/openstack-juno/epel-6
+ '6.5': http://repos.fedorapeople.org/repos/openstack/openstack-juno/epel-6
+ '7.0': http://repos.fedorapeople.org/repos/openstack/openstack-juno/epel-7
+ version: juno
+ config:
+ enable_epel: y
+ short_repo: prod
+tester:
+ name: tempest
+distro_reboot_options: '--no-wall '' Reboot is triggered by Ansible'' '
+job:
+ verbosity: 1
+ archive:
+ - '{{ tempest.dir }}/etc/tempest.conf'
+ - '{{ tempest.dir }}/etc/tempest.conf.sample'
+ - '{{ tempest.dir }}/*.log'
+ - '{{ tempest.dir }}/*.xml'
+ - /root/
+ - /var/log/
+ - /etc/nova
+ - /etc/ceilometer
+ - /etc/cinder
+ - /etc/glance
+ - /etc/keystone
+ - /etc/neutron
+ - /etc/ntp
+ - /etc/puppet
+ - /etc/qpid
+ - /etc/qpidd.conf
+ - /root
+ - /etc/yum.repos.d
+ - /etc/yum.repos.d
+topology:
+ name: multinode
+ short_name: mt
+workaround_neutron_ovs_udev_loop: true
+workaround_glance_table_utf8: false
+verbosity:
+ debug: 0
+ info: 1
+ warning: 2
+ warn: 2
+ errors: 3
+provisioner:
+ username: admin
+ network:
+ type: nova
+ name: external
+ skip: skip_provision
+ foreman_url: https://10.2.84.2/api/v2/
+ password: octopus
+ type: foreman
+workaround_nova_compute_fix: false
+workarounds:
+ enabled: true
Both the dea.yaml and dha.yaml can be created from an existing Fuel deployment, in a way making a xerox copy of it for re-deployment. For this, the create_templates structure is copied to the Fuel master and the create_templates.sh is run there.
-In the examples directory, VM and network definitions for libvirt together with matching dea.yaml and dha.yaml can be found. The DEA configuration is made using a opnfv-59 deployment.
+In the examples/libvirt directory, VM and network definitions for libvirt together with matching dea.yaml and dha.yaml can be found. The DEA configuration is made using a opnfv-59 deployment.
+
+There is also a hybrid libirt/IPMI adapter with an example dea.yaml and dha.yaml for a small one controller + one compute deploy in examples/ipmi.
The details and API description for DEA and DHA can be found in the documentation directory.
-See the README in examples to learn how to get a libvirt Fuel deploy up and running!
+See the READMEs in the examples dirctories to get going with a Fuel deployment for your environment - or write and contribute your own hardware adapter for your environment!
+
fuelHostname=`dea getFuelHostname` || error_exit "Could not get Fuel hostname"
fuelDns=`dea getFuelDns` || error_exit "Could not get Fuel DNS"
fuelNodeId=`dha getFuelNodeId` || error_exit "Could not get fuel node id"
+dha useFuelCustomInstall
+fuelCustom=$?
# Stop all VMs
for id in `dha getAllNodeIds`
do
- if [ $nofuel -eq 0 ]; then
+ if [ $nofuel -eq 0 -o $fuelCustom -eq 0 ]; then
if [ $fuelNodeId -ne $id ]; then
echo "Powering off id $id"
dha nodePowerOff $id
fi
else
- echo "Powering off id $id"
- dha nodePowerOff $id
+ echo "Powering off id $id"
+ dha nodePowerOff $id
fi
done
isofile=$deployiso
if dha useFuelCustomInstall; then
echo "Custom Fuel install"
- dha fuelCustomInstall || error_exit "Failed to run Fuel custom install"
+ dha fuelCustomInstall $isofile || error_exit "Failed to run Fuel custom install"
else
echo "Ordinary Fuel install"
. ${functions}/install_iso.sh || error_exit "Failed to install Fuel"
--- /dev/null
+#!/bin/bash
+##############################################################################
+# Copyright (c) 2015 Ericsson AB and others.
+# stefan.k.berg@ericsson.com
+# jonas.bjurel@ericsson.com
+# All rights reserved. This program and the accompanying materials
+# are made available under the terms of the Apache License, Version 2.0
+# which accompanies this distribution, and is available at
+# http://www.apache.org/licenses/LICENSE-2.0
+##############################################################################
+
+
+
+########################################################################
+# Internal functions BEGIN
+
+
+dha_f_err()
+{
+ local rc
+ local cmd
+
+ rc=$1
+ shift
+
+ echo "$@" >&2
+ echo "Exit with code $rc" >&2
+
+ exit $rc
+}
+
+dha_f_run()
+{
+ $@
+ rc=$?
+ if [ $rc -ne 0 ]; then
+ dha_f_err $rc "running $@" >&2
+ exit $rc
+ fi
+}
+
+
+dha_f_ipmi()
+{
+
+ local nodeId
+ local ipmiIp
+ local ipmiUser
+ local ipmiPass
+
+ nodeId=$1
+ shift
+
+ ipmiIp=$($DHAPARSE $DHAFILE getNodeProperty $nodeId ipmiIp)
+ ipmiUser=$($DHAPARSE $DHAFILE getNodeProperty $nodeId ipmiUser)
+ ipmiPass=$($DHAPARSE $DHAFILE getNodeProperty $nodeId ipmiPass)
+
+ test -n "$ipmiIp" || error_exit "Could not get IPMI IP"
+ test -n "$ipmiUser" || error_exit "Could not get IPMI username"
+ test -n "$ipmiPass" || error_exit "Could not get IPMI password"
+
+ ipmitool -I lanplus -A password -H $ipmiIp -U $ipmiUser -P $ipmiPass \
+ $@
+}
+
+# Internal functions END
+########################################################################
+
+
+true=0
+false=1
+
+# API: Get the DHA API version supported by this adapter
+dha_getApiVersion ()
+{
+ echo "1.0"
+}
+
+# API: Get the name of this adapter
+dha_getAdapterName ()
+{
+ echo "ipmi"
+}
+
+# API: ### Node identity functions ###
+# API: Node numbering is sequential.
+
+# API: Get a list of all defined node ids, sorted in ascending order
+dha_getAllNodeIds()
+{
+ dha_f_run $DHAPARSE $DHAFILE getNodes | sort -n
+}
+
+
+# API: Get ID for Fuel node ID
+dha_getFuelNodeId()
+{
+ for node in `dha_getAllNodeIds`
+ do
+ if [ -n "`dha_f_run $DHAPARSE $DHAFILE getNodeProperty $node isFuel`" ]
+ then
+ echo $node
+ fi
+ done
+}
+
+# API: Get node property
+# API: Argument 1: node id
+# API: Argument 2: Property
+dha_getNodeProperty()
+{
+ dha_f_run $DHAPARSE $DHAFILE getNodeProperty $1 $2
+}
+
+
+# API: Get MAC address for the PXE interface of this node. If not
+# API: defined, an empty string will be returned.
+# API: Argument 1: Node id
+dha_getNodePxeMac()
+{
+ dha_getNodeProperty $1 pxeMac
+}
+
+
+### Node operation functions ###
+
+# API: Use custom installation method for Fuel master?
+# API: Returns 0 if true, 1 if false
+dha_useFuelCustomInstall()
+{
+ $DHAPARSE $DHAFILE get fuelCustomInstall | grep -qi true
+ rc=$?
+ return $rc
+}
+
+# API: Fuel custom installation method
+# API: Leaving the Fuel master powered on and booting from ISO at exit
+# API: Argument 1: Full path to ISO file to install
+dha_fuelCustomInstall()
+{
+ if [ ! -e $1 ]; then
+ error_exit "Could not access ISO file $1"
+ fi
+
+ dha_useFuelCustomInstall || dha_f_err 1 "dha_fuelCustomInstall not supported"
+
+ fuelIp=`dea getFuelIp` || error_exit "Could not get fuel IP"
+ fuelNodeId=`dha getFuelNodeId` || error_exit "Could not get fuel node id"
+ virtName=`$DHAPARSE $DHAFILE getNodeProperty $fuelNodeId libvirtName`
+
+ # Power off the node
+ virsh destroy $virtName
+ sleep 5
+
+ # Zero the MBR
+ fueldisk=`virsh dumpxml $virtName | \
+ grep "<source file" | grep raw | sed "s/.*'\(.*\)'.*/\1/"`
+ disksize=`ls -l $fueldisk | awk '{ print $5 }'`
+ rm -f $fueldisk
+ fallocate -l $disksize $fueldisk
+
+ # Set the boot order
+ for order in disk iso
+ do
+ if [ "$order" == "pxe" ]; then
+ bootline+="<boot dev='network'\/>\n"
+ elif [ "$order" == "disk" ]; then
+ bootline+="<boot dev='hd'/\>\n"
+ elif [ "$order" == "iso" ]; then
+ bootline+="<boot dev='cdrom'/\>\n"
+ else
+ error_exit "Unknown boot type: $order"
+ fi
+ done
+
+ virsh dumpxml $virtName | grep -v "<boot dev.*>" | \
+ sed "/<\/os>/i\
+ ${bootline}" > $tmpdir/vm.xml || error_exit "Could not set bootorder"
+ virsh define $tmpdir/vm.xml || error_exit "Could not set bootorder"
+
+
+ # Get name of CD device
+ cdDev=`virsh domblklist $virtName | tail -n +3 | awk '{ print $1 }' | grep ^hd`
+
+ # Eject and insert ISO
+ virsh change-media $virtName --config --eject $cdDev
+ sleep 5
+ virsh change-media $virtName --config --insert $cdDev $1 || error_exit "Could not insert CD $1"
+ sleep 5
+
+ virsh start $virtName || error_exit "Could not start $virtName"
+ sleep 5
+
+ # wait for node up
+ echo "Waiting for Fuel master to accept SSH"
+ while true
+ do
+ ssh root@${fuelIp} date 2>/dev/null
+ if [ $? -eq 0 ]; then
+ break
+ fi
+ sleep 10
+ done
+
+ # Wait until fuelmenu is up
+ echo "Waiting for fuelmenu to come up"
+ menuPid=""
+ while [ -z "$menuPid" ]
+ do
+ menuPid=`ssh root@${fuelIp} "ps -ef" 2>&1 | grep fuelmenu | grep -v grep | awk '{ print $2 }'`
+ sleep 10
+ done
+
+ # This is where we inject our own astute.yaml settings
+ scp -q $deafile root@${fuelIp}:. || error_exit "Could not copy DEA file to Fuel"
+ echo "Uploading build tools to Fuel server"
+ ssh root@${fuelIp} rm -rf tools || error_exit "Error cleaning old tools structure"
+ scp -qrp $topdir/tools root@${fuelIp}:. || error_exit "Error copying tools"
+ echo "Running transplant #0"
+ ssh root@${fuelIp} "cd tools; ./transplant0.sh ../`basename $deafile`" \
+ || error_exit "Error running transplant sequence #0"
+
+
+
+ # Let the Fuel deployment continue
+ echo "Found menu as PID $menuPid, now killing it"
+ ssh root@${fuelIp} "kill $menuPid" 2>/dev/null
+
+ # Wait until installation complete
+ echo "Waiting for bootstrap of Fuel node to complete"
+ while true
+ do
+ ssh root@${fuelIp} "ps -ef" 2>/dev/null \
+ | grep -q /usr/local/sbin/bootstrap_admin_node
+ if [ $? -ne 0 ]; then
+ break
+ fi
+ sleep 10
+ done
+
+ echo "Waiting for one minute for Fuel to stabilize"
+ sleep 1m
+
+}
+
+# API: Get power on strategy from DHA
+# API: Returns one of two values:
+# API: all: Power on all nodes simultaneously
+# API: sequence: Power on node by node, wait for Fuel detection
+dha_getPowerOnStrategy()
+{
+ local strategy
+
+ strategy=`$DHAPARSE $DHAFILE get powerOnStrategy`
+
+ if [ "$strategy" == "all" ]; then
+ echo $strategy
+ elif
+ [ "$strategy" == "sequence" ]; then
+ echo $strategy
+ else
+ dha_f_err 1 "Could not parse strategy from DHA, got $strategy"
+ fi
+}
+
+# API: Power on node
+# API: Argument 1: node id
+dha_nodePowerOn()
+{
+ local nodeId
+
+ nodeId=$1
+ state=$(dha_f_ipmi $1 chassis power status) || error_exit "Could not get IPMI power status"
+ echo "state $state"
+
+
+ if [ "$(echo $state | sed 's/.* //')" == "off" ]; then
+ dha_f_ipmi $1 chassis power on
+ fi
+}
+
+# API: Power off node
+# API: Argument 1: node id
+dha_nodePowerOff()
+{
+ local nodeId
+
+ nodeId=$1
+ state=$(dha_f_ipmi $1 chassis power status) || error_exit "Could not get IPMI power status"
+ echo "state $state"
+
+
+ if [ "$(echo $state | sed 's/.* //')" != "off" ]; then
+ dha_f_ipmi $1 chassis power off
+ fi
+}
+
+# API: Reset node
+# API: Argument 1: node id
+dha_nodeReset()
+{
+ local nodeId
+
+ nodeId=$1
+ state=$(dha_f_ipmi $1 chassis power reset) || error_exit "Could not get IPMI power status"
+ echo "state $state"
+
+
+ if [ "$(echo $state | sed 's/.* //')" != "off" ]; then
+ dha_f_ipmi $1 chassis power reset
+ fi
+}
+
+# Boot order and ISO boot file
+
+# API: Is the node able to commit boot order without power toggle?
+# API: Argument 1: node id
+# API: Returns 0 if true, 1 if false
+dha_nodeCanSetBootOrderLive()
+{
+ return $true
+}
+
+# API: Set node boot order
+# API: Argument 1: node id
+# API: Argument 2: Space separated line of boot order - boot ids are "pxe", "disk" and "iso"
+# Strategy for IPMI: Always set boot order to persistent except in the case of CDROM.
+dha_nodeSetBootOrder()
+{
+ local id
+ local order
+
+ id=$1
+ shift
+ order=$1
+
+ if [ "$order" == "pxe" ]; then
+ dha_f_ipmi $id chassis bootdev pxe options=persistent || error_exit "Could not get IPMI power status"
+ elif [ "$order" == "iso" ]; then
+ dha_f_ipmi $id chassis bootdev cdrom || error_exit "Could not get IPMI power status"
+ elif [ "$order" == "disk" ]; then
+ dha_f_ipmi $id chassis bootdev disk options=persistent || error_exit "Could not get IPMI power status"
+ else
+ error_exit "Unknown boot type: $order"
+ fi
+}
+
+# API: Is the node able to operate on ISO media?
+# API: Argument 1: node id
+# API: Returns 0 if true, 1 if false
+dha_nodeCanSetIso()
+{
+ return $false
+}
+
+# API: Is the node able to insert add eject ISO files without power toggle?
+# API: Argument 1: node id
+# API: Returns 0 if true, 1 if false
+dha_nodeCanHandeIsoLive()
+{
+ return $false
+}
+
+# API: Insert ISO into virtualDVD
+# API: Argument 1: node id
+# API: Argument 2: iso file
+dha_nodeInsertIso()
+{
+ error_exit "Node can not handle InsertIso"
+}
+
+# API: Eject ISO from virtual DVD
+# API: Argument 1: node id
+dha_nodeEjectIso()
+{
+ error_exit "Node can not handle InsertIso"
+}
+
+# API: Wait until a suitable time to change the boot order to
+# API: "disk iso" when ISO has been booted. Can't be too long, nor
+# API: too short...
+# API: We should make a smart trigger for this somehow...
+dha_waitForIsoBoot()
+{
+ echo "waitForIsoBoot: Not used by ipmi"
+}
+
+# API: Is the node able to reset its MBR?
+# API: Returns 0 if true, 1 if false
+dha_nodeCanZeroMBR()
+{
+ return $false
+}
+
+# API: Reset the node's MBR
+dha_nodeZeroMBR()
+{
+ error_exit "Node $1 does not support ZeroMBR"
+}
+
+
+# API: Entry point for dha functions
+# API: Typically do not call "dha_node_zeroMBR" but "dha node_ZeroMBR"
+# API:
+# API: Before calling dha, the adapter file must gave been sourced with
+# API: the DHA file name as argument
+dha()
+{
+ if [ -z "$DHAFILE" ]; then
+ error_exit "dha_setup has not been run"
+ fi
+
+
+ if type dha_$1 &>/dev/null; then
+ cmd=$1
+ shift
+ dha_$cmd $@
+ return $?
+ else
+ error_exit "No such function dha_$1 defined"
+ fi
+}
+
+if [ "$1" == "api" ]; then
+ egrep "^# API: |dha.*\(\)" $0 | sed 's/^# API: /# /' | grep -v dha_f_ | sed 's/)$/)\n/'
+else
+ dhatopdir=$(dirname $(readlink -f $BASH_SOURCE))
+ DHAPARSE="$dhatopdir/dhaParse.py"
+ DHAFILE=$1
+
+ if [ ! -f $DHAFILE ]; then
+ error_exit "No such DHA file: $DHAFILE"
+ else
+ echo "Adapter init"
+ echo "$@"
+ echo "DHAPARSE: $DHAPARSE"
+ echo "DHAFILE: $DHAFILE"
+ fi
+
+fi
virtName=`$DHAPARSE $DHAFILE getNodeProperty $1 libvirtName`
isoFile=$2
- virsh change-media fuel-master --insert hdc $isoFile
+ virsh change-media $virtName --insert hdc $isoFile
}
# API: Eject ISO from virtual DVD
virsh change-media $virtName --eject hdc
}
-# API: Wait until a suitable time to change the boot order to
+# API: Wait until a suitable time to change the boot order to
# API: "disk iso" when ISO has been booted. Can't be too long, nor
# API: too short...
# API: We should make a smart trigger for this somehow...
# API: Convert a normal MAC to a Fuel short mac for --node-id
dea_convertMacToShortMac()
{
- echo $1 | sed 's/.*..:..:..:..:\(..:..\).*/\1/'
+ echo $1 | sed 's/.*..:..:..:..:\(..:..\).*/\1/' | tr [A-Z] [a-z]
}
ssh root@${fuelIp} rm -rf tools || error_exit "Error cleaning old tools structure"
scp -qrp $topdir/tools root@${fuelIp}:. || error_exit "Error copying tools"
+echo "Uploading templating tols to Fuel server"
+ssh root@${fuelIp} rm -rf create_templates || error_exit "Error cleaning old create_templates structure"
+scp -qrp $topdir/../create_templates root@${fuelIp}:. || error_exit "Error copying create_templates"
+
# Refuse to run if environment already present
envcnt=`fuel env | tail -n +3 | grep -v '^$' | wc -l`
if [ $envcnt -ne 0 ]; then
sed -i "s/ showmenu=[^ ]*/ showmenu=yes/" isolinux/isolinux.cfg
echo "isolinux.cfg after: `grep netmask isolinux/isolinux.cfg`"
+rm -vf $newiso
echo "Creating iso $newiso"
mkisofs -quiet -r \
-J -R -b isolinux/isolinux.bin \
assigned = []
nw = {}
interface["assigned_networks"] = []
- for nwname in nodeInfo["interfaces"][interface["name"]]:
- iface = {}
- iface["id"] = nwlookup[nwname]
- iface["name"] = nwname
- interface["assigned_networks"].append(iface)
+ try:
+ for nwname in nodeInfo["interfaces"][interface["name"]]:
+ iface = {}
+ iface["id"] = nwlookup[nwname]
+ iface["name"] = nwname
+ interface["assigned_networks"].append(iface)
+ except:
+ print "No match for interface " + interface["name"]
f3 = open(infile, 'w')
f3.write(yaml.dump(doc1, default_flow_style=False))
error_exit()
{
- echo "Erroxxxr: $@"
+ echo "Error: $@" >&2
exit 1
}
else
libvirtName=""
fi
-
+
if [ $id == "`dha getFuelNodeId`" ]; then
echo "$id: `dha getNodeProperty $id pxeMac` $libvirtName <--- Fuel master"
else
echo "no"
fi
-
echo "Done"
--- /dev/null
+This is a hybrid IPMI DHA, where the Fuel master is run as a KVM
+VM, but all other nodes are real iron under IPMI control.
+
+In "conf" is an example dea.yaml, dha.yaml and a VM definition for the
+Fuel master. You need to tune these so they match your specific
+environment. In addition you need to create a bridge from the VM to
+the admin (PXE) network of the physical nodes. An example snippet for
+/etc/network/interfaces which also configures NAT can be found in the
+README.txt in conf.
+
--- /dev/null
+Add this snippet into /etc/network/interfaces after making sure to
+replace p1p1.20 with your actual outbound interface in order to
+provide network access to the Fuel master for DNS and NTP.
+
+iface vfuelnet inet static
+ bridge_ports em1
+ address 10.30.0.1
+ netmask 255.255.255.0
+ pre-down iptables -t nat -D POSTROUTING --out-interface p1p1.20 -j MASQUERADE -m comment --comment "vfuelnet"
+ pre-down iptables -D FORWARD --in-interface vfuelnet --out-interface p1p1.20 -m comment --comment "vfuelnet"
+ post-up iptables -t nat -A POSTROUTING --out-interface p1p1.20 -j MASQUERADE -m comment --comment "vfuelnet"
+ post-up iptables -A FORWARD --in-interface vfuelnet --out-interface p1p1.20 -m comment --comment "vfuelnet"
--- /dev/null
+title: Deployment Environment Adapter (DEA)
+# DEA API version supported
+version: 1.1
+created: Tue May 5 15:33:07 UTC 2015
+comment: Test environment Ericsson Montreal
+nodes:
+- id: 1
+ interfaces:
+ eth0:
+ - fuelweb_admin
+ eth2:
+ - public
+ - management
+ - storage
+ - private
+ role: controller
+- id: 2
+ interfaces:
+ eth0:
+ - fuelweb_admin
+ eth2:
+ - public
+ - management
+ - storage
+ - private
+ role: compute
+environment_mode: multinode
+environment_name: Stefan3_auto
+fuel:
+ ADMIN_NETWORK:
+ dhcp_pool_end: 10.30.0.254
+ dhcp_pool_start: 10.30.0.3
+ ipaddress: 10.30.0.2
+ netmask: 255.255.255.0
+ DNS_DOMAIN: opnfvericsson.ca
+ DNS_SEARCH: opnfvericsson.ca
+ DNS_UPSTREAM: 10.118.32.193
+ FUEL_ACCESS:
+ password: admin
+ user: admin
+ HOSTNAME: mrberg-fuel
+ NTP1: 0.ca.pool.ntp.org
+ NTP2: 1.ca.pool.ntp.org
+ NTP3: 2.ca.pool.ntp.org
+controller:
+- action: add-br
+ name: br-eth0
+- action: add-port
+ bridge: br-eth0
+ name: eth0
+- action: add-br
+ name: br-eth1
+- action: add-port
+ bridge: br-eth1
+ name: eth1
+- action: add-br
+ name: br-eth2
+- action: add-port
+ bridge: br-eth2
+ name: eth2
+- action: add-br
+ name: br-eth3
+- action: add-port
+ bridge: br-eth3
+ name: eth3
+- action: add-br
+ name: br-eth4
+- action: add-port
+ bridge: br-eth4
+ name: eth4
+- action: add-br
+ name: br-eth5
+- action: add-port
+ bridge: br-eth5
+ name: eth5
+- action: add-br
+ name: br-ex
+- action: add-br
+ name: br-mgmt
+- action: add-br
+ name: br-storage
+- action: add-br
+ name: br-fw-admin
+- action: add-patch
+ bridges:
+ - br-eth2
+ - br-storage
+ tags:
+ - 220
+ - 0
+ vlan_ids:
+ - 220
+ - 0
+- action: add-patch
+ bridges:
+ - br-eth2
+ - br-mgmt
+ tags:
+ - 320
+ - 0
+ vlan_ids:
+ - 320
+ - 0
+- action: add-patch
+ bridges:
+ - br-eth0
+ - br-fw-admin
+ trunks:
+ - 0
+- action: add-patch
+ bridges:
+ - br-eth2
+ - br-ex
+ tags:
+ - 120
+ - 0
+ vlan_ids:
+ - 120
+ - 0
+- action: add-br
+ name: br-prv
+- action: add-patch
+ bridges:
+ - br-eth2
+ - br-prv
+compute:
+- action: add-br
+ name: br-eth0
+- action: add-port
+ bridge: br-eth0
+ name: eth0
+- action: add-br
+ name: br-eth1
+- action: add-port
+ bridge: br-eth1
+ name: eth1
+- action: add-br
+ name: br-eth2
+- action: add-port
+ bridge: br-eth2
+ name: eth2
+- action: add-br
+ name: br-eth3
+- action: add-port
+ bridge: br-eth3
+ name: eth3
+- action: add-br
+ name: br-eth4
+- action: add-port
+ bridge: br-eth4
+ name: eth4
+- action: add-br
+ name: br-eth5
+- action: add-port
+ bridge: br-eth5
+ name: eth5
+- action: add-br
+ name: br-mgmt
+- action: add-br
+ name: br-storage
+- action: add-br
+ name: br-fw-admin
+- action: add-patch
+ bridges:
+ - br-eth2
+ - br-storage
+ tags:
+ - 220
+ - 0
+ vlan_ids:
+ - 220
+ - 0
+- action: add-patch
+ bridges:
+ - br-eth2
+ - br-mgmt
+ tags:
+ - 320
+ - 0
+ vlan_ids:
+ - 320
+ - 0
+- action: add-patch
+ bridges:
+ - br-eth0
+ - br-fw-admin
+ trunks:
+ - 0
+- action: add-br
+ name: br-prv
+- action: add-patch
+ bridges:
+ - br-eth2
+ - br-prv
+opnfv:
+ compute: {}
+ controller: {}
+network:
+ networking_parameters:
+ base_mac: fa:16:3e:00:00:00
+ dns_nameservers:
+ - 10.118.32.193
+ - 8.8.8.8
+ floating_ranges:
+ - - 172.16.0.130
+ - 172.16.0.254
+ gre_id_range:
+ - 2
+ - 65535
+ internal_cidr: 192.168.111.0/24
+ internal_gateway: 192.168.111.1
+ net_l23_provider: ovs
+ segmentation_type: vlan
+ vlan_range:
+ - 2022
+ - 2023
+ networks:
+ - cidr: 172.16.0.0/24
+ gateway: 172.16.0.1
+ ip_ranges:
+ - - 172.16.0.2
+ - 172.16.0.126
+ meta:
+ assign_vip: true
+ cidr: 172.16.0.0/24
+ configurable: true
+ floating_range_var: floating_ranges
+ ip_range:
+ - 172.16.0.2
+ - 172.16.0.126
+ map_priority: 1
+ name: public
+ notation: ip_ranges
+ render_addr_mask: public
+ render_type: null
+ use_gateway: true
+ vlan_start: null
+ name: public
+ vlan_start: 120
+ - cidr: 192.168.0.0/24
+ gateway: null
+ ip_ranges:
+ - - 192.168.0.2
+ - 192.168.0.254
+ meta:
+ assign_vip: true
+ cidr: 192.168.0.0/24
+ configurable: true
+ map_priority: 2
+ name: management
+ notation: cidr
+ render_addr_mask: internal
+ render_type: cidr
+ use_gateway: false
+ vlan_start: 101
+ name: management
+ vlan_start: 320
+ - cidr: 192.168.1.0/24
+ gateway: null
+ ip_ranges:
+ - - 192.168.1.2
+ - 192.168.1.254
+ meta:
+ assign_vip: false
+ cidr: 192.168.1.0/24
+ configurable: true
+ map_priority: 2
+ name: storage
+ notation: cidr
+ render_addr_mask: storage
+ render_type: cidr
+ use_gateway: false
+ vlan_start: 102
+ name: storage
+ vlan_start: 220
+ - cidr: null
+ gateway: null
+ ip_ranges: []
+ meta:
+ assign_vip: false
+ configurable: false
+ map_priority: 2
+ name: private
+ neutron_vlan_range: true
+ notation: null
+ render_addr_mask: null
+ render_type: null
+ seg_type: vlan
+ use_gateway: false
+ vlan_start: null
+ name: private
+ vlan_start: null
+ - cidr: 10.30.0.0/24
+ gateway: null
+ ip_ranges:
+ - - 10.30.0.3
+ - 10.30.0.254
+ meta:
+ assign_vip: false
+ configurable: false
+ map_priority: 0
+ notation: ip_ranges
+ render_addr_mask: null
+ render_type: null
+ unmovable: true
+ use_gateway: true
+ name: fuelweb_admin
+ vlan_start: null
+settings:
+ editable:
+ access:
+ email:
+ description: Email address for Administrator
+ label: email
+ type: text
+ value: admin@localhost
+ weight: 40
+ metadata:
+ label: Access
+ weight: 10
+ password:
+ description: Password for Administrator
+ label: password
+ type: password
+ value: admin
+ weight: 20
+ tenant:
+ description: Tenant (project) name for Administrator
+ label: tenant
+ regex:
+ error: Invalid tenant name
+ source: ^(?!services$)(?!nova$)(?!glance$)(?!keystone$)(?!neutron$)(?!cinder$)(?!swift$)(?!ceph$)(?![Gg]uest$).*
+ type: text
+ value: admin
+ weight: 30
+ user:
+ description: Username for Administrator
+ label: username
+ regex:
+ error: Invalid username
+ source: ^(?!services$)(?!nova$)(?!glance$)(?!keystone$)(?!neutron$)(?!cinder$)(?!swift$)(?!ceph$)(?![Gg]uest$).*
+ type: text
+ value: admin
+ weight: 10
+ additional_components:
+ ceilometer:
+ description: If selected, Ceilometer component will be installed
+ label: Install Ceilometer
+ type: checkbox
+ value: false
+ weight: 40
+ heat:
+ description: ''
+ label: ''
+ type: hidden
+ value: true
+ weight: 30
+ metadata:
+ label: Additional Components
+ weight: 20
+ murano:
+ description: If selected, Murano component will be installed
+ label: Install Murano
+ restrictions:
+ - cluster:net_provider != 'neutron'
+ type: checkbox
+ value: false
+ weight: 20
+ sahara:
+ description: If selected, Sahara component will be installed
+ label: Install Sahara
+ type: checkbox
+ value: false
+ weight: 10
+ common:
+ auth_key:
+ description: Public key(s) to include in authorized_keys on deployed nodes
+ label: Public Key
+ type: text
+ value: ''
+ weight: 70
+ auto_assign_floating_ip:
+ description: If selected, OpenStack will automatically assign a floating IP
+ to a new instance
+ label: Auto assign floating IP
+ restrictions:
+ - cluster:net_provider == 'neutron'
+ type: checkbox
+ value: false
+ weight: 40
+ compute_scheduler_driver:
+ label: Scheduler driver
+ type: radio
+ value: nova.scheduler.filter_scheduler.FilterScheduler
+ values:
+ - data: nova.scheduler.filter_scheduler.FilterScheduler
+ description: Currently the most advanced OpenStack scheduler. See the OpenStack
+ documentation for details.
+ label: Filter scheduler
+ - data: nova.scheduler.simple.SimpleScheduler
+ description: This is 'naive' scheduler which tries to find the least loaded
+ host
+ label: Simple scheduler
+ weight: 40
+ debug:
+ description: Debug logging mode provides more information, but requires more
+ disk space.
+ label: OpenStack debug logging
+ type: checkbox
+ value: false
+ weight: 20
+ disable_offload:
+ description: If set, generic segmentation offload (gso) and generic receive
+ offload (gro) on physical nics will be disabled. See ethtool man.
+ label: Disable generic offload on physical nics
+ restrictions:
+ - action: hide
+ condition: cluster:net_provider == 'neutron' and networking_parameters:segmentation_type
+ == 'gre'
+ type: checkbox
+ value: true
+ weight: 80
+ libvirt_type:
+ label: Hypervisor type
+ type: radio
+ value: kvm
+ values:
+ - data: kvm
+ description: Choose this type of hypervisor if you run OpenStack on hardware
+ label: KVM
+ restrictions:
+ - settings:common.libvirt_type.value == 'vcenter'
+ - data: qemu
+ description: Choose this type of hypervisor if you run OpenStack on virtual
+ hosts.
+ label: QEMU
+ restrictions:
+ - settings:common.libvirt_type.value == 'vcenter'
+ - data: vcenter
+ description: Choose this type of hypervisor if you run OpenStack in a vCenter
+ environment.
+ label: vCenter
+ restrictions:
+ - settings:common.libvirt_type.value != 'vcenter' or cluster:net_provider
+ == 'neutron'
+ weight: 30
+ metadata:
+ label: Common
+ weight: 30
+ nova_quota:
+ description: Quotas are used to limit CPU and memory usage for tenants. Enabling
+ quotas will increase load on the Nova database.
+ label: Nova quotas
+ type: checkbox
+ value: false
+ weight: 25
+ resume_guests_state_on_host_boot:
+ description: Whether to resume previous guests state when the host reboots.
+ If enabled, this option causes guests assigned to the host to resume their
+ previous state. If the guest was running a restart will be attempted when
+ nova-compute starts. If the guest was not running previously, a restart
+ will not be attempted.
+ label: Resume guests state on host boot
+ type: checkbox
+ value: true
+ weight: 60
+ use_cow_images:
+ description: For most cases you will want qcow format. If it's disabled, raw
+ image format will be used to run VMs. OpenStack with raw format currently
+ does not support snapshotting.
+ label: Use qcow format for images
+ type: checkbox
+ value: true
+ weight: 50
+ corosync:
+ group:
+ description: ''
+ label: Group
+ type: text
+ value: 226.94.1.1
+ weight: 10
+ metadata:
+ label: Corosync
+ restrictions:
+ - action: hide
+ condition: 'true'
+ weight: 50
+ port:
+ description: ''
+ label: Port
+ type: text
+ value: '12000'
+ weight: 20
+ verified:
+ description: Set True only if multicast is configured correctly on router.
+ label: Need to pass network verification.
+ type: checkbox
+ value: false
+ weight: 10
+ external_dns:
+ dns_list:
+ description: List of upstream DNS servers, separated by comma
+ label: DNS list
+ type: text
+ value: 10.118.32.193, 8.8.8.8
+ weight: 10
+ metadata:
+ label: Upstream DNS
+ weight: 90
+ external_ntp:
+ metadata:
+ label: Upstream NTP
+ weight: 100
+ ntp_list:
+ description: List of upstream NTP servers, separated by comma
+ label: NTP servers list
+ type: text
+ value: 0.pool.ntp.org, 1.pool.ntp.org
+ weight: 10
+ kernel_params:
+ kernel:
+ description: Default kernel parameters
+ label: Initial parameters
+ type: text
+ value: console=ttyS0,9600 console=tty0 rootdelay=90 nomodeset
+ weight: 45
+ metadata:
+ label: Kernel parameters
+ weight: 40
+ neutron_mellanox:
+ metadata:
+ enabled: true
+ label: Mellanox Neutron components
+ toggleable: false
+ weight: 50
+ plugin:
+ label: Mellanox drivers and SR-IOV plugin
+ type: radio
+ value: disabled
+ values:
+ - data: disabled
+ description: If selected, Mellanox drivers, Neutron and Cinder plugin will
+ not be installed.
+ label: Mellanox drivers and plugins disabled
+ restrictions:
+ - settings:storage.iser.value == true
+ - data: drivers_only
+ description: If selected, Mellanox Ethernet drivers will be installed to
+ support networking over Mellanox NIC. Mellanox Neutron plugin will not
+ be installed.
+ label: Install only Mellanox drivers
+ restrictions:
+ - settings:common.libvirt_type.value != 'kvm'
+ - data: ethernet
+ description: If selected, both Mellanox Ethernet drivers and Mellanox network
+ acceleration (Neutron) plugin will be installed.
+ label: Install Mellanox drivers and SR-IOV plugin
+ restrictions:
+ - settings:common.libvirt_type.value != 'kvm' or not (cluster:net_provider
+ == 'neutron' and networking_parameters:segmentation_type == 'vlan')
+ weight: 60
+ vf_num:
+ description: Note that one virtual function will be reserved to the storage
+ network, in case of choosing iSER.
+ label: Number of virtual NICs
+ restrictions:
+ - settings:neutron_mellanox.plugin.value != 'ethernet'
+ type: text
+ value: '16'
+ weight: 70
+ nsx_plugin:
+ connector_type:
+ description: Default network transport type to use
+ label: NSX connector type
+ type: select
+ value: stt
+ values:
+ - data: gre
+ label: GRE
+ - data: ipsec_gre
+ label: GRE over IPSec
+ - data: stt
+ label: STT
+ - data: ipsec_stt
+ label: STT over IPSec
+ - data: bridge
+ label: Bridge
+ weight: 80
+ l3_gw_service_uuid:
+ description: UUID for the default L3 gateway service to use with this cluster
+ label: L3 service UUID
+ regex:
+ error: Invalid L3 gateway service UUID
+ source: '[a-f\d]{8}-[a-f\d]{4}-[a-f\d]{4}-[a-f\d]{4}-[a-f\d]{12}'
+ type: text
+ value: ''
+ weight: 50
+ metadata:
+ enabled: false
+ label: VMware NSX
+ restrictions:
+ - action: hide
+ condition: cluster:net_provider != 'neutron' or networking_parameters:net_l23_provider
+ != 'nsx'
+ weight: 20
+ nsx_controllers:
+ description: One or more IPv4[:port] addresses of NSX controller node, separated
+ by comma (e.g. 10.30.30.2,192.168.110.254:443)
+ label: NSX controller endpoint
+ regex:
+ error: Invalid controller endpoints, specify valid IPv4[:port] pair
+ source: ^(([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])\.){3}([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])(:(6553[0-5]|655[0-2][\d]|65[0-4][\d]{2}|6[0-4][\d]{3}|5[\d]{4}|[\d][\d]{0,3}))?(,(([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])\.){3}([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])(:(6553[0-5]|655[0-2][\d]|65[0-4][\d]{2}|6[0-4][\d]{3}|5[\d]{4}|[\d][\d]{0,3}))?)*$
+ type: text
+ value: ''
+ weight: 60
+ nsx_password:
+ description: Password for Administrator
+ label: NSX password
+ regex:
+ error: Empty password
+ source: \S
+ type: password
+ value: ''
+ weight: 30
+ nsx_username:
+ description: NSX administrator's username
+ label: NSX username
+ regex:
+ error: Empty username
+ source: \S
+ type: text
+ value: admin
+ weight: 20
+ packages_url:
+ description: URL to NSX specific packages
+ label: URL to NSX bits
+ regex:
+ error: Invalid URL, specify valid HTTP/HTTPS URL with IPv4 address (e.g.
+ http://10.20.0.2/nsx)
+ source: ^https?://(([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])\.){3}([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])(:(6553[0-5]|655[0-2][\d]|65[0-4][\d]{2}|6[0-4][\d]{3}|5[\d]{4}|[\d][\d]{0,3}))?(/.*)?$
+ type: text
+ value: ''
+ weight: 70
+ replication_mode:
+ description: ''
+ label: NSX cluster has Service nodes
+ type: checkbox
+ value: true
+ weight: 90
+ transport_zone_uuid:
+ description: UUID of the pre-existing default NSX Transport zone
+ label: Transport zone UUID
+ regex:
+ error: Invalid transport zone UUID
+ source: '[a-f\d]{8}-[a-f\d]{4}-[a-f\d]{4}-[a-f\d]{4}-[a-f\d]{12}'
+ type: text
+ value: ''
+ weight: 40
+ provision:
+ metadata:
+ label: Provision
+ restrictions:
+ - action: hide
+ condition: not ('experimental' in version:feature_groups)
+ weight: 80
+ method:
+ description: Which provision method to use for this cluster.
+ label: Provision method
+ type: radio
+ value: cobbler
+ values:
+ - data: image
+ description: Copying pre-built images on a disk.
+ label: Image
+ - data: cobbler
+ description: Install from scratch using anaconda or debian-installer.
+ label: Classic (use anaconda or debian-installer)
+ public_network_assignment:
+ assign_to_all_nodes:
+ description: When disabled, public network will be assigned to controllers
+ and zabbix-server only
+ label: Assign public network to all nodes
+ type: checkbox
+ value: false
+ weight: 10
+ metadata:
+ label: Public network assignment
+ restrictions:
+ - action: hide
+ condition: cluster:net_provider != 'neutron'
+ weight: 50
+ storage:
+ ephemeral_ceph:
+ description: Configures Nova to store ephemeral volumes in RBD. This works
+ best if Ceph is enabled for volumes and images, too. Enables live migration
+ of all types of Ceph backed VMs (without this option, live migration will
+ only work with VMs launched from Cinder volumes).
+ label: Ceph RBD for ephemeral volumes (Nova)
+ restrictions:
+ - settings:common.libvirt_type.value == 'vcenter'
+ type: checkbox
+ value: false
+ weight: 75
+ images_ceph:
+ description: Configures Glance to use the Ceph RBD backend to store images.
+ If enabled, this option will prevent Swift from installing.
+ label: Ceph RBD for images (Glance)
+ type: checkbox
+ value: false
+ weight: 30
+ images_vcenter:
+ description: Configures Glance to use the vCenter/ESXi backend to store images.
+ If enabled, this option will prevent Swift from installing.
+ label: VMWare vCenter/ESXi datastore for images (Glance)
+ restrictions:
+ - settings:common.libvirt_type.value != 'vcenter'
+ type: checkbox
+ value: false
+ weight: 35
+ iser:
+ description: 'High performance block storage: Cinder volumes over iSER protocol
+ (iSCSI over RDMA). This feature requires SR-IOV capabilities in the NIC,
+ and will use a dedicated virtual function for the storage network.'
+ label: iSER protocol for volumes (Cinder)
+ restrictions:
+ - settings:storage.volumes_lvm.value != true or settings:common.libvirt_type.value
+ != 'kvm'
+ type: checkbox
+ value: false
+ weight: 11
+ metadata:
+ label: Storage
+ weight: 60
+ objects_ceph:
+ description: Configures RadosGW front end for Ceph RBD. This exposes S3 and
+ Swift API Interfaces. If enabled, this option will prevent Swift from installing.
+ label: Ceph RadosGW for objects (Swift API)
+ restrictions:
+ - settings:storage.images_ceph.value == false
+ type: checkbox
+ value: false
+ weight: 80
+ osd_pool_size:
+ description: Configures the default number of object replicas in Ceph. This
+ number must be equal to or lower than the number of deployed 'Storage -
+ Ceph OSD' nodes.
+ label: Ceph object replication factor
+ regex:
+ error: Invalid number
+ source: ^[1-9]\d*$
+ restrictions:
+ - settings:common.libvirt_type.value == 'vcenter'
+ type: text
+ value: '2'
+ weight: 85
+ vc_datacenter:
+ description: Inventory path to a datacenter. If you want to use ESXi host
+ as datastore, it should be "ha-datacenter".
+ label: Datacenter name
+ regex:
+ error: Empty datacenter
+ source: \S
+ restrictions:
+ - action: hide
+ condition: settings:storage.images_vcenter.value == false or settings:common.libvirt_type.value
+ != 'vcenter'
+ type: text
+ value: ''
+ weight: 65
+ vc_datastore:
+ description: Datastore associated with the datacenter.
+ label: Datastore name
+ regex:
+ error: Empty datastore
+ source: \S
+ restrictions:
+ - action: hide
+ condition: settings:storage.images_vcenter.value == false or settings:common.libvirt_type.value
+ != 'vcenter'
+ type: text
+ value: ''
+ weight: 60
+ vc_host:
+ description: IP Address of vCenter/ESXi
+ label: vCenter/ESXi IP
+ regex:
+ error: Specify valid IPv4 address
+ source: ^(([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])\.){3}([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])$
+ restrictions:
+ - action: hide
+ condition: settings:storage.images_vcenter.value == false or settings:common.libvirt_type.value
+ != 'vcenter'
+ type: text
+ value: ''
+ weight: 45
+ vc_image_dir:
+ description: The name of the directory where the glance images will be stored
+ in the VMware datastore.
+ label: Datastore Images directory
+ regex:
+ error: Empty images directory
+ source: \S
+ restrictions:
+ - action: hide
+ condition: settings:storage.images_vcenter.value == false or settings:common.libvirt_type.value
+ != 'vcenter'
+ type: text
+ value: /openstack_glance
+ weight: 70
+ vc_password:
+ description: vCenter/ESXi admin password
+ label: Password
+ regex:
+ error: Empty password
+ source: \S
+ restrictions:
+ - action: hide
+ condition: settings:storage.images_vcenter.value == false or settings:common.libvirt_type.value
+ != 'vcenter'
+ type: password
+ value: ''
+ weight: 55
+ vc_user:
+ description: vCenter/ESXi admin username
+ label: Username
+ regex:
+ error: Empty username
+ source: \S
+ restrictions:
+ - action: hide
+ condition: settings:storage.images_vcenter.value == false or settings:common.libvirt_type.value
+ != 'vcenter'
+ type: text
+ value: ''
+ weight: 50
+ volumes_ceph:
+ description: Configures Cinder to store volumes in Ceph RBD images.
+ label: Ceph RBD for volumes (Cinder)
+ restrictions:
+ - settings:storage.volumes_lvm.value == true or settings:common.libvirt_type.value
+ == 'vcenter'
+ type: checkbox
+ value: false
+ weight: 20
+ volumes_lvm:
+ description: Requires at least one Storage - Cinder LVM node.
+ label: Cinder LVM over iSCSI for volumes
+ restrictions:
+ - settings:storage.volumes_ceph.value == true
+ type: checkbox
+ value: false
+ weight: 10
+ volumes_vmdk:
+ description: Configures Cinder to store volumes via VMware vCenter.
+ label: VMware vCenter for volumes (Cinder)
+ restrictions:
+ - settings:common.libvirt_type.value != 'vcenter' or settings:storage.volumes_lvm.value
+ == true
+ type: checkbox
+ value: false
+ weight: 15
+ syslog:
+ metadata:
+ label: Syslog
+ weight: 50
+ syslog_port:
+ description: Remote syslog port
+ label: Port
+ regex:
+ error: Invalid Syslog port
+ source: ^([1-9][0-9]{0,3}|[1-5][0-9]{4}|6[0-4][0-9]{3}|65[0-4][0-9]{2}|655[0-2][0-9]|6553[0-5])$
+ type: text
+ value: '514'
+ weight: 20
+ syslog_server:
+ description: Remote syslog hostname
+ label: Hostname
+ type: text
+ value: ''
+ weight: 10
+ syslog_transport:
+ label: Syslog transport protocol
+ type: radio
+ value: tcp
+ values:
+ - data: udp
+ description: ''
+ label: UDP
+ - data: tcp
+ description: ''
+ label: TCP
+ weight: 30
+ vcenter:
+ cluster:
+ description: vCenter cluster name. If you have multiple clusters, use comma
+ to separate names
+ label: Cluster
+ regex:
+ error: Invalid cluster list
+ source: ^([^,\ ]+([\ ]*[^,\ ])*)(,[^,\ ]+([\ ]*[^,\ ])*)*$
+ type: text
+ value: ''
+ weight: 40
+ datastore_regex:
+ description: The Datastore regexp setting specifies the data stores to use
+ with Compute. For example, "nas.*". If you want to use all available datastores,
+ leave this field blank
+ label: Datastore regexp
+ regex:
+ error: Invalid datastore regexp
+ source: ^(\S.*\S|\S|)$
+ type: text
+ value: ''
+ weight: 50
+ host_ip:
+ description: IP Address of vCenter
+ label: vCenter IP
+ regex:
+ error: Specify valid IPv4 address
+ source: ^(([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])\.){3}([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])$
+ type: text
+ value: ''
+ weight: 10
+ metadata:
+ label: vCenter
+ restrictions:
+ - action: hide
+ condition: settings:common.libvirt_type.value != 'vcenter'
+ weight: 20
+ use_vcenter:
+ description: ''
+ label: ''
+ type: hidden
+ value: true
+ weight: 5
+ vc_password:
+ description: vCenter admin password
+ label: Password
+ regex:
+ error: Empty password
+ source: \S
+ type: password
+ value: admin
+ weight: 30
+ vc_user:
+ description: vCenter admin username
+ label: Username
+ regex:
+ error: Empty username
+ source: \S
+ type: text
+ value: admin
+ weight: 20
+ vlan_interface:
+ description: Physical ESXi host ethernet adapter for VLAN networking (e.g.
+ vmnic1). If empty "vmnic0" is used by default
+ label: ESXi VLAN interface
+ restrictions:
+ - action: hide
+ condition: cluster:net_provider != 'nova_network' or networking_parameters:net_manager
+ != 'VlanManager'
+ type: text
+ value: ''
+ weight: 60
+ zabbix:
+ metadata:
+ label: Zabbix Access
+ restrictions:
+ - action: hide
+ condition: not ('experimental' in version:feature_groups)
+ weight: 70
+ password:
+ description: Password for Zabbix Administrator
+ label: password
+ type: password
+ value: zabbix
+ weight: 20
+ username:
+ description: Username for Zabbix Administrator
+ label: username
+ type: text
+ value: admin
+ weight: 10
--- /dev/null
+title: Deployment Hardware Adapter (DHA)
+# DHA API version supported
+version: 1.1
+created: Mon May 4 09:03:46 UTC 2015
+comment: Test environment Ericsson Montreal
+
+# Adapter to use for this definition
+adapter: ipmi
+
+# Node list.
+# Mandatory properties are id and role.
+# The MAC address of the PXE boot interface for Fuel is not
+# mandatory to be defined.
+# All other properties are adapter specific.
+
+nodes:
+- id: 1
+ pxeMac: 14:58:D0:55:E2:E0
+ ipmiIp: 10.118.32.202
+ ipmiUser: username
+ ipmiPass: password
+- id: 2
+ pxeMac: 9C:B6:54:8A:25:C0
+ ipmiIp: 10.118.32.213
+ ipmiUser: username
+ ipmiPass: password
+# Adding the Fuel node as node id 3 which may not be correct - please
+# adjust as needed.
+- id: 3
+ pxeMac: 52:54:00:bd:e4:21
+ libvirtName: vFuel
+ isFuel: yes
+
+# Deployment power on strategy
+# all: Turn on all nodes at once. There will be no correlation
+# between the DHA and DEA node numbering. MAC addresses
+# will be used to select the node roles though.
+# sequence: Turn on the nodes in sequence starting with the lowest order
+# node and wait for the node to be detected by Fuel. Not until
+# the node has been detected and assigned a role will the next
+# node be turned on.
+powerOnStrategy: sequence
+
+# If fuelCustomInstall is set to true, Fuel is assumed to be installed by
+# calling the DHA adapter function "dha_fuelCustomInstall()" with two
+# arguments: node ID and the ISO file name to deploy. The custom install
+# function is then to handle all necessary logic to boot the Fuel master
+# from the ISO and then return.
+# Allowed values: true, false
+
+fuelCustomInstall: true
+
--- /dev/null
+<domain type='kvm'>
+ <name>vFuel</name>
+ <uuid>daf21ecf-0dfe-4937-a155-8edde4f3ea76</uuid>
+ <memory unit='KiB'>8290304</memory>
+ <currentMemory unit='KiB'>8290304</currentMemory>
+ <vcpu placement='static'>2</vcpu>
+ <resource>
+ <partition>/machine</partition>
+ </resource>
+ <os>
+ <type arch='x86_64' machine='pc-i440fx-utopic'>hvm</type>
+ <boot dev='hd'/>
+ <boot dev='cdrom'/>
+ <bootmenu enable='no'/>
+ </os>
+ <features>
+ <acpi/>
+ <apic/>
+ <pae/>
+ </features>
+ <cpu mode='custom' match='exact'>
+ <model fallback='allow'>SandyBridge</model>
+ </cpu>
+ <clock offset='utc'>
+ <timer name='rtc' tickpolicy='catchup'/>
+ <timer name='pit' tickpolicy='delay'/>
+ <timer name='hpet' present='no'/>
+ </clock>
+ <on_poweroff>destroy</on_poweroff>
+ <on_reboot>restart</on_reboot>
+ <on_crash>restart</on_crash>
+ <pm>
+ <suspend-to-mem enabled='no'/>
+ <suspend-to-disk enabled='no'/>
+ </pm>
+ <devices>
+ <emulator>/usr/bin/kvm-spice</emulator>
+ <disk type='file' device='disk'>
+ <driver name='qemu' type='raw'/>
+ <source file='/mnt/images/vFuel.raw'/>
+ <target dev='vda' bus='virtio'/>
+ <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
+ </disk>
+ <disk type='block' device='cdrom'>
+ <driver name='qemu' type='raw'/>
+ <source dev='/home/user/fueltmp/deploy-opnfv.iso'/>
+ <target dev='hda' bus='ide'/>
+ <readonly/>
+ <address type='drive' controller='0' bus='0' target='0' unit='0'/>
+ </disk>
+ <controller type='usb' index='0' model='ich9-ehci1'>
+ <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x7'/>
+ </controller>
+ <controller type='usb' index='0' model='ich9-uhci1'>
+ <master startport='0'/>
+ <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0' multifunction='on'/>
+ </controller>
+ <controller type='usb' index='0' model='ich9-uhci2'>
+ <master startport='2'/>
+ <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x1'/>
+ </controller>
+ <controller type='usb' index='0' model='ich9-uhci3'>
+ <master startport='4'/>
+ <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x2'/>
+ </controller>
+ <controller type='pci' index='0' model='pci-root'/>
+ <controller type='virtio-serial' index='0'>
+ <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
+ </controller>
+ <controller type='ide' index='0'>
+ <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
+ </controller>
+ <interface type='bridge'>
+ <mac address='52:54:00:bd:e4:21'/>
+ <source bridge='vfuelnet'/>
+ <model type='virtio'/>
+ <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
+ </interface>
+ <serial type='pty'>
+ <target port='0'/>
+ </serial>
+ <console type='pty'>
+ <target type='serial' port='0'/>
+ </console>
+ <channel type='spicevmc'>
+ <target type='virtio' name='com.redhat.spice.0'/>
+ <address type='virtio-serial' controller='0' bus='0' port='1'/>
+ </channel>
+ <input type='mouse' bus='ps2'/>
+ <input type='keyboard' bus='ps2'/>
+ <graphics type='spice' autoport='yes' listen='127.0.0.1'>
+ <listen type='address' address='127.0.0.1'/>
+ </graphics>
+ <sound model='ich6'>
+ <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
+ </sound>
+ <video>
+ <model type='qxl' ram='65536' vram='65536' heads='1'/>
+ <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
+ </video>
+ <redirdev bus='usb' type='spicevmc'>
+ </redirdev>
+ <redirdev bus='usb' type='spicevmc'>
+ </redirdev>
+ <redirdev bus='usb' type='spicevmc'>
+ </redirdev>
+ <redirdev bus='usb' type='spicevmc'>
+ </redirdev>
+ <memballoon model='virtio'>
+ <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/>
+ </memballoon>
+ </devices>
+ <seclabel type='dynamic' model='apparmor' relabel='yes'/>
+</domain>
+
--- /dev/null
+#!/bin/bash
+##############################################################################
+# Copyright (c) 2015 Ericsson AB and others.
+# stefan.k.berg@ericsson.com
+# jonas.bjurel@ericsson.com
+# All rights reserved. This program and the accompanying materials
+# are made available under the terms of the Apache License, Version 2.0
+# which accompanies this distribution, and is available at
+# http://www.apache.org/licenses/LICENSE-2.0
+##############################################################################
+
+# Tools for installation on the libvirt server/base host
+#
+apt-get install -y libvirt-bin qemu-kvm tightvncserver virt-manager \
+ sshpass fuseiso genisoimage blackbox xterm
+restart libvirt-bin
Code Review / genesis.git / commitdiff