Revert "Adding in support for Lithium container." 04/904/3
authorJonas Bjurel <jonas.bjurel@ericsson.com>
Fri, 26 Jun 2015 09:03:36 +0000 (09:03 +0000)
committerJonas Bjurel <jonas.bjurel@ericsson.com>
Fri, 26 Jun 2015 10:22:56 +0000 (10:22 +0000)
since it doesnt deploy

This reverts commit eb887812da568cfb4908f6ae14449b2ceaeb5bc0.

Change-Id: Ia7490d86c1d91abca1f50d90f43bdf3e4917f23a

23 files changed:
common/puppet-opnfv/manifests/templates/Lithium_rc0/dockerfile/Dockerfile [deleted file]
common/puppet-opnfv/manifests/templates/Lithium_rc0/dockerfile/container_scripts/check_feature.sh [deleted file]
common/puppet-opnfv/manifests/templates/Lithium_rc0/dockerfile/container_scripts/speak.sh [deleted file]
common/puppet-opnfv/manifests/templates/Lithium_rc0/dockerfile/container_scripts/start_odl_docker_container.sh [deleted file]
fuel/build/Makefile
fuel/build/f_lith_odl_docker/Makefile [deleted file]
fuel/build/f_lith_odl_docker/dockerfile/Dockerfile [deleted file]
fuel/build/f_lith_odl_docker/dockerfile/container_scripts/check_feature.sh [deleted file]
fuel/build/f_lith_odl_docker/dockerfile/container_scripts/speak.sh [deleted file]
fuel/build/f_lith_odl_docker/dockerfile/container_scripts/start_odl_docker.sh [deleted file]
fuel/build/f_lith_odl_docker/puppet/modules/opnfv/manifests/odl_lith_docker.pp [deleted file]
fuel/build/f_lith_odl_docker/puppet/modules/opnfv/odl_docker/Lithium_rc0/container_scripts/check_feature.sh [deleted file]
fuel/build/f_lith_odl_docker/puppet/modules/opnfv/odl_docker/Lithium_rc0/container_scripts/speak.sh [deleted file]
fuel/build/f_lith_odl_docker/puppet/modules/opnfv/odl_docker/Lithium_rc0/container_scripts/start_odl_docker_container.sh [deleted file]
fuel/build/f_lith_odl_docker/puppet/modules/opnfv/scripts/change.sh [deleted file]
fuel/build/f_lith_odl_docker/puppet/modules/opnfv/scripts/config_net_odl.sh [deleted file]
fuel/build/f_lith_odl_docker/puppet/modules/opnfv/scripts/stage_odl.sh [deleted file]
fuel/build/f_lith_odl_docker/puppet/modules/opnfv/scripts/start_odl_container.sh [deleted file]
fuel/build/f_lith_odl_docker/scripts/config_net_odl.sh [deleted file]
fuel/build/f_lith_odl_docker/scripts/config_neutron_for_odl.sh [deleted file]
fuel/build/f_lith_odl_docker/scripts/prep_nets_for_odl.sh [deleted file]
fuel/build/f_lith_odl_docker/scripts/setup_ovs_for_odl.sh [deleted file]
fuel/build/f_opnfv_puppet/puppet/modules/opnfv/manifests/init.pp

diff --git a/common/puppet-opnfv/manifests/templates/Lithium_rc0/dockerfile/Dockerfile b/common/puppet-opnfv/manifests/templates/Lithium_rc0/dockerfile/Dockerfile
deleted file mode 100644 (file)
index 6d7535d..0000000
+++ /dev/null
@@ -1,82 +0,0 @@
-####################################################################
-# Copyright (c) 2015 Ericsson AB and others.
-# daniel.smith@ericsson.com
-# All rights reserved. This program and the accompanying materials
-# are made available under the terms of the Apache License, Version 2.0
-# which accompanies this distribution, and is available at
-# http://www.apache.org/licenses/LICENSE-2.0
-##############################################################################
-#
-#  DOCKER FILE FOR LITHIUM ODL RC0 Testing 
-#
-#############################################################################
-
-
-#Set the base image - note: the current release of Karaf is using Jdk7 and alot of 12.04, so we will use it rather than 14.04 and backport a ton of stuff
-FROM ubuntu:12.04
-
-# Maintainer Info
-MAINTAINER Daniel Smith
-
-
-#Run apt-get update one start just to check for updates when building
-RUN echo "Updating APT"
-RUN apt-get update
-RUN echo "Adding wget"
-RUN apt-get install -y wget
-RUN apt-get install -y net-tools
-RUN apt-get install -y openjdk-7-jre
-RUN apt-get install -y openjdk-7-jdk
-RUN apt-get install -y openssh-server
-RUN apt-get install -y vim
-RUN apt-get install -y expect
-RUN apt-get install -y daemontools
-RUN mkdir -p /opt/odl_source/lithium
-RUN bash -c 'echo "export JAVA_HOME=/usr/lib/jvm/java-7-openjdk-amd64" >> ~/.bashrc'
-
-
-
-#Now lets got and fetch the ODL distribution
-RUN echo "Fetching Lithium Rc0"
-RUN wget https://nexus.opendaylight.org/content/repositories/opendaylight.snapshot/org/opendaylight/integration/distribution-karaf/0.3.0-SNAPSHOT/distribution-karaf-0.3.0-20150612.144348-2492.tar.gz -O /opt/odl_source/lithium/distribution-karaf-0.3.0-Lithium-RC0.tar.gz
-
-RUN echo "Untarring ODL inplace"
-RUN mkdir -p /opt/odl/lithium
-RUN tar zxvf /opt/odl_source/lithium/distribution-karaf-0.3.0-Lithium-RC0.tar.gz -C /opt/odl/lithium
-
-RUN echo "Installing DLUX and other features into ODL"
-#COPY dockerfile/container_scripts/start_odl_docker.sh /etc/init.d/start_odl_docker.sh
-COPY container_scripts/start_odl_docker_container.sh /etc/init.d/
-COPY container_scripts/speak.sh /etc/init.d/
-#COPY dockerfile/container_scripts/speak.sh /etc/init.d/speak.sh
-RUN chmod 777 /etc/init.d/start_odl_docker_container.sh
-RUN chmod 777 /etc/init.d/speak.sh
-
-
-
-# Expose the ports
-
-# PORTS FOR BASE SYSTEM AND DLUX
-EXPOSE 8101
-EXPOSE 6633
-EXPOSE 1099
-EXPOSE 43506
-EXPOSE 8181
-EXPOSE 8185
-EXPOSE 9000
-EXPOSE 39378
-EXPOSE 33714
-EXPOSE 44444
-EXPOSE 6653
-
-# PORTS FOR OVSDB AND ODL CONTROL
-EXPOSE 12001
-EXPOSE 6640
-EXPOSE 8080
-EXPOSE 7800
-EXPOSE 55130
-EXPOSE 52150
-EXPOSE 36826
-
-# set the ENTRYPOINT - An entry point allows us to run this container as an exectuable
-CMD ["/etc/init.d/start_odl_docker_container.sh"]
diff --git a/common/puppet-opnfv/manifests/templates/Lithium_rc0/dockerfile/container_scripts/check_feature.sh b/common/puppet-opnfv/manifests/templates/Lithium_rc0/dockerfile/container_scripts/check_feature.sh
deleted file mode 100644 (file)
index 04d7b53..0000000
+++ /dev/null
@@ -1,18 +0,0 @@
-##############################################################################
-# Copyright (c) 2015 Ericsson AB and others.
-# daniel.smith@ericsson.com
-# All rights reserved. This program and the accompanying materials
-# are made available under the terms of the Apache License, Version 2.0
-# which accompanies this distribution, and is available at
-# http://www.apache.org/licenses/LICENSE-2.0
-##############################################################################
-
-#!/usr/bin/expect
-spawn /opt/odl/distribution-karaf-0.3.0-Lithium-RC0/bin/client
-expect "root>"
-send "feature:list | grep -i odl-restconf\r"
-send "\r\r\r"
-expect "root>"
-send "logout\r"
-
-
diff --git a/common/puppet-opnfv/manifests/templates/Lithium_rc0/dockerfile/container_scripts/speak.sh b/common/puppet-opnfv/manifests/templates/Lithium_rc0/dockerfile/container_scripts/speak.sh
deleted file mode 100644 (file)
index a7d0e6c..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/usr/bin/expect
-##############################################################################
-# Copyright (c) 2015 Ericsson AB and others.
-# daniel.smith@ericsson.com
-# All rights reserved. This program and the accompanying materials
-# are made available under the terms of the Apache License, Version 2.0
-# which accompanies this distribution, and is available at
-# http://www.apache.org/licenses/LICENSE-2.0
-##############################################################################
-#
-# Simple expect script to start up ODL client and load feature set for DLUX and OVSDB
-#  NOTE: THIS WILL BE REPLACED WITH A PROGRAMATIC METHOD SHORTLY
-#################################################################################
-
-spawn /opt/odl/distribution-karaf-0.3.0-Lithium-RC0/bin/client
-expect "root>"
-send "feature:install odl-base-all odl-aaa-authn odl-restconf odl-nsf-all odl-adsal-northbound odl-mdsal-apidocs  odl-ovsdb-openstack odl-ovsdb-northbound odl-dlux-core"
-send "\r\r\r"
-expect "root>"
-send "logout\r"
diff --git a/common/puppet-opnfv/manifests/templates/Lithium_rc0/dockerfile/container_scripts/start_odl_docker_container.sh b/common/puppet-opnfv/manifests/templates/Lithium_rc0/dockerfile/container_scripts/start_odl_docker_container.sh
deleted file mode 100644 (file)
index 96a40ec..0000000
+++ /dev/null
@@ -1,48 +0,0 @@
-#!/bin/bash
-##############################################################################
-# Copyright (c) 2015 Ericsson AB and others.
-# daniel.smith@ericsson.com
-# All rights reserved. This program and the accompanying materials
-# are made available under the terms of the Apache License, Version 2.0
-# which accompanies this distribution, and is available at
-# http://www.apache.org/licenses/LICENSE-2.0
-##############################################################################
-#
-# Simple expect script to start up ODL client and load feature set for DLUX and OVSDB
-#  NOTE: THIS WILL BE REPLACED WITH A PROGRAMATIC METHOD SHORTLY
-#################################################################################
-#  Start up script for calling karaf / ODL inside a docker container.
-#
-#  This script will also call a couple expect scripts to load the feature set that we want
-
-
-#ENV
-export JAVA_HOME=/usr/lib/jvm/java-7-openjdk-amd64
-
-#MAIN
-echo "Starting up the da Sheilds..."
-/opt/odl/distribution-karaf-0.3.0-Lithium-RC0/bin/karaf server &
-echo "Sleeping 5 bad hack"
-sleep 10
-echo "should see stuff listening now"
-netstat -na
-echo " should see proess running for karaf"
-ps -efa
-echo " Starting the packages we want"
-/etc/init.d/speak.sh
-echo "Printout the status - if its right, you should see 8181 appear now"
-netstat -na
-ps -efa
-
-
-
-## This is a loop that keeps our container going currently, prinout the "status of karaf" to the docker logs every minute
-## Cheap - but effective
-while true;
-do
-        echo "Checking status of ODL:"
-        /opt/odl/distribution-karaf-0.3.0-Lithium-RC0/bin/status
-        sleep 60
-done
-
-
index 6c98ed9..5f63120 100644 (file)
@@ -43,7 +43,6 @@ SUBDIRS += f_l23network
 SUBDIRS += f_resolvconf
 SUBDIRS += f_ntp
 SUBDIRS += f_odl_docker
 SUBDIRS += f_resolvconf
 SUBDIRS += f_ntp
 SUBDIRS += f_odl_docker
-SUBDIRS += f_lith_odl_docker
 #SUBDIRS += f_odl
 
 # f_example is only an example of how to generate a .deb package and
 #SUBDIRS += f_odl
 
 # f_example is only an example of how to generate a .deb package and
@@ -65,7 +64,6 @@ all:
        @echo "cache.mk" $(shell md5sum $(BUILD_BASE)/cache.mk | cut -f1 -d " ") >> $(VERSION_FILE)
        @echo "config.mk" $(shell md5sum $(BUILD_BASE)/config.mk | cut -f1 -d " ") >> $(VERSION_FILE)
        $(MAKE) -C f_odl_docker -f Makefile all
        @echo "cache.mk" $(shell md5sum $(BUILD_BASE)/cache.mk | cut -f1 -d " ") >> $(VERSION_FILE)
        @echo "config.mk" $(shell md5sum $(BUILD_BASE)/config.mk | cut -f1 -d " ") >> $(VERSION_FILE)
        $(MAKE) -C f_odl_docker -f Makefile all
-       $(MAKE) -C f_lith_odl_docker -f Makefile all
        @make -C docker
        @docker/runcontext $(DOCKERIMG) $(MAKE) $(MAKEFLAGS) iso
 
        @make -C docker
        @docker/runcontext $(DOCKERIMG) $(MAKE) $(MAKEFLAGS) iso
 
diff --git a/fuel/build/f_lith_odl_docker/Makefile b/fuel/build/f_lith_odl_docker/Makefile
deleted file mode 100755 (executable)
index e89da94..0000000
+++ /dev/null
@@ -1,52 +0,0 @@
-##############################################################################
-# Copyright (c) 2015 Ericsson AB and others.
-# stefan.k.berg@ericsson.com
-# jonas.bjurel@ericsson.com
-# All rights reserved. This program and the accompanying materials
-# are made available under the terms of the Apache License, Version 2.0
-# which accompanies this distribution, and is available at
-# http://www.apache.org/licenses/LICENSE-2.0
-##############################################################################
-
-TOP := $(shell pwd)
-BUILDTAG := robust_stefan
-RELEASE := Lithium_rc0
-
-# Edit this to match the GENESIS / OPNFV in your environment
-export OPNFV_PUPPET := $(BUILD_BASE)/../../common/puppet-opnfv
-include ../config.mk
-
-.PHONY: all
-all:
-       @mkdir -p puppet/modules/opnfv/odl_docker/${RELEASE}
-       @rm -rf tmp
-       @mkdir -p tmp
-       @cp -Rvp ${OPNFV_PUPPET}/manifests/templates/${RELEASE}/dockerfile tmp/.
-       @docker build -t ${BUILDTAG} tmp/dockerfile/.
-       @docker save ${BUILDTAG} > puppet/modules/opnfv/odl_docker/${RELEASE}/odl_docker_image.tar
-       @wget ${DOCKER_REPO}/${DOCKER_TAG} -O  puppet/modules/opnfv/odl_docker/${RELEASE}/docker-latest
-       @echo "OPFNV_PUPPET is: ${OPNFV_PUPPET}"
-       @cp -Rvp ${OPNFV_PUPPET}/manifests/templates/${RELEASE}/dockerfile/container_scripts  puppet/modules/opnfv/odl_docker/${RELEASE}/.
-
-.PHONY: clean
-clean:
-       @rm -rf tmp
-       @rm -rf release
-
-.PHONY: build-clean
-build-clean:
-       @rm -rf tmp
-       @rm -rf release
-       @rm -rf puppet/modules/opnfv/odl_docker/${RELEASE}/odl_docker_image.tar
-       @rm -rf puppet/modules/opnfv/odl_docker/${RELEASE}/docker-latest
-
-.PHONY: validate-cache
-validate-cache:
-       @echo "No cache validation schema available for $(shell pwd)"
-       @echo "Continuing ..."
-
-.PHONY: release
-release:
-       # Fetch PP from OPNFV Common
-       @cp -Rvp ${OPNFV_PUPPET}/manifests/odl_docker.pp ${PUPPET_DEST}
-       @cp -Rvp puppet/modules/* $(PUPPET_DEST)
diff --git a/fuel/build/f_lith_odl_docker/dockerfile/Dockerfile b/fuel/build/f_lith_odl_docker/dockerfile/Dockerfile
deleted file mode 100755 (executable)
index e3c7ee5..0000000
+++ /dev/null
@@ -1,72 +0,0 @@
-####################################################################
-#
-#   Dockerfile to build a ODL (Karaf) Docker Container
-#
-#   Copyright daniel.smith@ericsson.com
-#   License: Apache GPL
-#
-####################################################################
-
-
-#Set the base image - note: the current release of Karaf is using Jdk7 and alot of 12.04, so we will use it rather than 14.04 and backport a ton of stuff
-FROM ubuntu:12.04
-
-# Maintainer Info
-MAINTAINER Daniel Smith
-
-#Run apt-get update one start just to check for updates when building
-RUN echo "Updating APT"
-RUN apt-get update
-RUN echo "Adding wget"
-RUN apt-get install -y wget
-RUN apt-get install -y net-tools
-RUN apt-get install -y openjdk-7-jre
-RUN apt-get install -y openjdk-7-jdk
-RUN apt-get install -y openssh-server
-RUN apt-get install -y vim
-RUN apt-get install -y expect
-RUN apt-get install -y daemontools
-RUN mkdir -p /opt/odl_source
-RUN bash -c 'echo "export JAVA_HOME=/usr/lib/jvm/java-7-openjdk-amd64" >> ~/.bashrc'
-
-
-#Now lets got and fetch the ODL distribution
-RUN echo "Fetching ODL"
-RUN wget https://nexus.opendaylight.org/content/groups/public/org/opendaylight/integration/distribution-karaf/0.2.3-Helium-SR3/distribution-karaf-0.2.3-Helium-SR3.tar.gz -O /opt/odl_source/distribution-karaf-0.2.3-Helium-SR3.tar.gz
-
-RUN echo "Untarring ODL inplace"
-RUN mkdir -p /opt/odl
-RUN tar zxvf /opt/odl_source/distribution-karaf-0.2.3-Helium-SR3.tar.gz -C /opt/odl
-
-RUN echo "Installing DLUX and other features into ODL"
-COPY tmp/dockerfile/container_scripts/start_odl_docker.sh /etc/init.d/start_odl_docker.sh
-COPY tmp/dockerfile/container_scripts/speak.sh /etc/init.d/speak.sh
-RUN chmod 777 /etc/init.d/start_odl_docker.sh
-RUN chmod 777 /etc/init.d/speak.sh
-
-
-# Expose the ports
-# PORTS FOR BASE SYSTEM AND DLUX
-EXPOSE 8101
-EXPOSE 6633
-EXPOSE 1099
-EXPOSE 43506
-EXPOSE 8181
-EXPOSE 8185
-EXPOSE 9000
-EXPOSE 39378
-EXPOSE 33714
-EXPOSE 44444
-EXPOSE 6653
-
-# PORTS FOR OVSDB AND ODL CONTROL
-EXPOSE 12001
-EXPOSE 6640
-EXPOSE 8080
-EXPOSE 7800
-EXPOSE 55130
-EXPOSE 52150
-EXPOSE 36826
-
-# set the ENTRYPOINT - An entry point allows us to run this container as an exectuable
-CMD ["/etc/init.d/start_odl_docker.sh"]
diff --git a/fuel/build/f_lith_odl_docker/dockerfile/container_scripts/check_feature.sh b/fuel/build/f_lith_odl_docker/dockerfile/container_scripts/check_feature.sh
deleted file mode 100755 (executable)
index 3e5d0b2..0000000
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/usr/bin/expect
-spawn /opt/odl/distribution-karaf-0.2.3-Helium-SR3/bin/client
-expect "root>"
-send "feature:list | grep -i odl-restconf\r"
-send "\r\r\r"
-expect "root>"
-send "logout\r"
-
diff --git a/fuel/build/f_lith_odl_docker/dockerfile/container_scripts/speak.sh b/fuel/build/f_lith_odl_docker/dockerfile/container_scripts/speak.sh
deleted file mode 100755 (executable)
index 3ba07a8..0000000
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/usr/bin/expect
-# Ericsson Research Canada
-#
-# Author: Daniel Smith <daniel.smith@ericsson.com>
-#
-# Simple expect script to start up ODL client and load feature set for DLUX and OVSDB
-#
-#  NOTE: THIS WILL BE REPLACED WITH A PROGRAMATIC METHOD SHORTLY
-#  DEPRECATED AFTER ARNO
-
-spawn /opt/odl/distribution-karaf-0.2.3-Helium-SR3/bin/client
-expect "root>"
-send "feature:install odl-base-all odl-aaa-authn odl-restconf odl-nsf-all odl-adsal-northbound odl-mdsal-apidocs  odl-ovsdb-openstack odl-ovsdb-northbound odl-dlux-core"
-send "\r\r\r"
-expect "root>"
-send "logout\r"
-
diff --git a/fuel/build/f_lith_odl_docker/dockerfile/container_scripts/start_odl_docker.sh b/fuel/build/f_lith_odl_docker/dockerfile/container_scripts/start_odl_docker.sh
deleted file mode 100755 (executable)
index 1c72dda..0000000
+++ /dev/null
@@ -1,38 +0,0 @@
-#!/bin/bash
-#  Ericsson Research Canada
-#
-#  Author: Daniel Smith <daniel.smith@ericsson.com>
-#
-#  Start up script for calling karaf / ODL inside a docker container.
-#
-#  This script will also call a couple expect scripts to load the feature set that we want
-
-
-#ENV
-export JAVA_HOME=/usr/lib/jvm/java-7-openjdk-amd64
-
-#MAIN
-echo "Starting up the da Sheilds..."
-/opt/odl/distribution-karaf-0.2.3-Helium-SR3/bin/karaf server &
-echo "Sleeping 5 bad hack"
-sleep 10
-echo "should see stuff listening now"
-netstat -na
-echo " should see proess running for karaf"
-ps -efa
-echo " Starting the packages we want"
-/etc/init.d/speak.sh
-echo "Printout the status - if its right, you should see 8181 appear now"
-netstat -na
-ps -efa
-
-
-
-## This is a loop that keeps our container going currently, prinout the "status of karaf" to the docker logs every minute
-## Cheap - but effective
-while true;
-do
-       echo "Checking status of ODL:"
-       /opt/odl/distribution-karaf-0.2.3-Helium-SR3/bin/status
-       sleep 60
-done
diff --git a/fuel/build/f_lith_odl_docker/puppet/modules/opnfv/manifests/odl_lith_docker.pp b/fuel/build/f_lith_odl_docker/puppet/modules/opnfv/manifests/odl_lith_docker.pp
deleted file mode 100644 (file)
index e456180..0000000
+++ /dev/null
@@ -1,81 +0,0 @@
-class opnfv::odl_lith_docker
-{
-  case $::fuel_settings['role'] {
-    /controller/: {
-
-      file { '/opt':
-        ensure => 'directory',
-      }
-
-      file { '/opt/opnfv':
-        ensure => 'directory',
-        owner  => 'root',
-        group  => 'root',
-        mode   => 777,
-      }
-
-      file { '/opt/opnfv/odl':
-        ensure => 'directory',
-      }
-
-      file { '/opt/opnfv/odl/lithium':
-       ensure => 'directory',
-      }
-
-      file { '/opt/opnfv/odl/lithium/odl_docker_image.tar':
-        ensure => present,
-        source => '/etc/puppet/modules/opnfv/odl_docker/Lithium_rc0/odl_docker_image.tar',
-        mode   => 750,
-      }
-
-      file { '/opt/opnfv/odl/lithium/docker-latest':
-        ensure => present,
-        source => '/etc/puppet/modules/opnfv/odl_docker/Lithium_rc0/docker-latest',
-        mode   => 750,
-      }
-
-      file { '/opt/opnfv/odl/start_odl_container.sh':
-        ensure => present,
-        source => '/etc/puppet/modules/opnfv/scripts/start_odl_container.sh',
-        mode   => 750,
-      }
-      file { '/opt/opnfv/odl/stage_odl.sh':
-        ensure => present,
-        source => '/etc/puppet/modules/opnfv/scripts/stage_odl.sh',
-        mode   => 750,
-      }
-      file { '/opt/opnfv/odl/config_net_odl.sh':
-        ensure => present,
-        source => '/etc/puppet/modules/opnfv/scripts/config_net_odl.sh',
-        mode   => 750,
-      }
-      file { '/opt/opnfv/odl/change.sh':
-        ensure => present,
-        source => '/etc/puppet/modules/opnfv/scripts/change.sh',
-        mode   => 750,
-      }
-
-
-      # fix failed to find the cgroup root issue
-      # https://github.com/docker/docker/issues/8791
-      case $::operatingsystem {
-        'ubuntu': {
-          package {'cgroup-lite':
-            ensure => present,
-          }
-
-          service {'cgroup-lite':
-            ensure  => running,
-            enable  => true,
-            require => Package['cgroup-lite'],
-          }
-        }
-        'centos': {
-          package {'docker-io':
-            ensure => latest,
-          }
-        }
-      }
-    }
-  }
-}
diff --git a/fuel/build/f_lith_odl_docker/puppet/modules/opnfv/odl_docker/Lithium_rc0/container_scripts/check_feature.sh b/fuel/build/f_lith_odl_docker/puppet/modules/opnfv/odl_docker/Lithium_rc0/container_scripts/check_feature.sh
deleted file mode 100644 (file)
index 04d7b53..0000000
+++ /dev/null
@@ -1,18 +0,0 @@
-##############################################################################
-# Copyright (c) 2015 Ericsson AB and others.
-# daniel.smith@ericsson.com
-# All rights reserved. This program and the accompanying materials
-# are made available under the terms of the Apache License, Version 2.0
-# which accompanies this distribution, and is available at
-# http://www.apache.org/licenses/LICENSE-2.0
-##############################################################################
-
-#!/usr/bin/expect
-spawn /opt/odl/distribution-karaf-0.3.0-Lithium-RC0/bin/client
-expect "root>"
-send "feature:list | grep -i odl-restconf\r"
-send "\r\r\r"
-expect "root>"
-send "logout\r"
-
-
diff --git a/fuel/build/f_lith_odl_docker/puppet/modules/opnfv/odl_docker/Lithium_rc0/container_scripts/speak.sh b/fuel/build/f_lith_odl_docker/puppet/modules/opnfv/odl_docker/Lithium_rc0/container_scripts/speak.sh
deleted file mode 100644 (file)
index a7d0e6c..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/usr/bin/expect
-##############################################################################
-# Copyright (c) 2015 Ericsson AB and others.
-# daniel.smith@ericsson.com
-# All rights reserved. This program and the accompanying materials
-# are made available under the terms of the Apache License, Version 2.0
-# which accompanies this distribution, and is available at
-# http://www.apache.org/licenses/LICENSE-2.0
-##############################################################################
-#
-# Simple expect script to start up ODL client and load feature set for DLUX and OVSDB
-#  NOTE: THIS WILL BE REPLACED WITH A PROGRAMATIC METHOD SHORTLY
-#################################################################################
-
-spawn /opt/odl/distribution-karaf-0.3.0-Lithium-RC0/bin/client
-expect "root>"
-send "feature:install odl-base-all odl-aaa-authn odl-restconf odl-nsf-all odl-adsal-northbound odl-mdsal-apidocs  odl-ovsdb-openstack odl-ovsdb-northbound odl-dlux-core"
-send "\r\r\r"
-expect "root>"
-send "logout\r"
diff --git a/fuel/build/f_lith_odl_docker/puppet/modules/opnfv/odl_docker/Lithium_rc0/container_scripts/start_odl_docker_container.sh b/fuel/build/f_lith_odl_docker/puppet/modules/opnfv/odl_docker/Lithium_rc0/container_scripts/start_odl_docker_container.sh
deleted file mode 100644 (file)
index 96a40ec..0000000
+++ /dev/null
@@ -1,48 +0,0 @@
-#!/bin/bash
-##############################################################################
-# Copyright (c) 2015 Ericsson AB and others.
-# daniel.smith@ericsson.com
-# All rights reserved. This program and the accompanying materials
-# are made available under the terms of the Apache License, Version 2.0
-# which accompanies this distribution, and is available at
-# http://www.apache.org/licenses/LICENSE-2.0
-##############################################################################
-#
-# Simple expect script to start up ODL client and load feature set for DLUX and OVSDB
-#  NOTE: THIS WILL BE REPLACED WITH A PROGRAMATIC METHOD SHORTLY
-#################################################################################
-#  Start up script for calling karaf / ODL inside a docker container.
-#
-#  This script will also call a couple expect scripts to load the feature set that we want
-
-
-#ENV
-export JAVA_HOME=/usr/lib/jvm/java-7-openjdk-amd64
-
-#MAIN
-echo "Starting up the da Sheilds..."
-/opt/odl/distribution-karaf-0.3.0-Lithium-RC0/bin/karaf server &
-echo "Sleeping 5 bad hack"
-sleep 10
-echo "should see stuff listening now"
-netstat -na
-echo " should see proess running for karaf"
-ps -efa
-echo " Starting the packages we want"
-/etc/init.d/speak.sh
-echo "Printout the status - if its right, you should see 8181 appear now"
-netstat -na
-ps -efa
-
-
-
-## This is a loop that keeps our container going currently, prinout the "status of karaf" to the docker logs every minute
-## Cheap - but effective
-while true;
-do
-        echo "Checking status of ODL:"
-        /opt/odl/distribution-karaf-0.3.0-Lithium-RC0/bin/status
-        sleep 60
-done
-
-
diff --git a/fuel/build/f_lith_odl_docker/puppet/modules/opnfv/scripts/change.sh b/fuel/build/f_lith_odl_docker/puppet/modules/opnfv/scripts/change.sh
deleted file mode 100644 (file)
index f7f3d6e..0000000
+++ /dev/null
@@ -1,219 +0,0 @@
-#!/bin/bash
-# script to remove bridges and reset networking for ODL
-
-
-#VARS
-MODE=0
-DNS=8.8.8.8
-
-#ENV
-source ~/openrc
-
-# GET IPS for that node
-function get_ips {
-       BR_MGMT=`grep address /etc/network/ifcfg_backup/ifcfg-br-mgmt | awk -F" " '{print $2}'`
-       BR_STORAGE=`grep address /etc/network/ifcfg_backup/ifcfg-br-storage | awk -F" " '{print $2}'`
-       BR_FW_ADMIN=`grep address /etc/network/ifcfg_backup/ifcfg-br-fw-admin | awk -F" " '{print $2}'`
-       BR_EX=`grep address /etc/network/ifcfg_backup/ifcfg-br-ex | awk -F" " '{print $2}'`
-       DEF_NETMASK=255.255.255.0
-       DEF_GW=172.30.9.1
-}
-
-function backup_ifcfg {
-        echo " backing up "
-        mkdir -p /etc/network/ifcfg_backup
-        mv /etc/network/interfaces.d/ifcfg-br-ex /etc/network/ifcfg_backup/.
-        mv /etc/network/interfaces.d/ifcfg-br-fw-admin /etc/network/ifcfg_backup/.
-        mv /etc/network/interfaces.d/ifcfg-br-mgmt /etc/network/ifcfg_backup/.
-        mv /etc/network/interfaces.d/ifcfg-br-storage /etc/network/ifcfg_backup/.
-        mv /etc/network/interfaces.d/ifcfg-br-prv /etc/network/ifcfg_backup/.
-        mv /etc/network/interfaces.d/ifcfg-eth0 /etc/network/ifcfg_backup/.
-        mv /etc/network/interfaces.d/ifcfg-eth1 /etc/network/ifcfg_backup/.
-        rm -rf /etc/network/interfaces.d/ifcfg-eth1.300
-        rm -rf /etc/network/interfaces.d/ifcfg-eth1.301
-        rm -rf /etc/network/interfaces.d/ifcfg-eth1
-        rm -rf /etc/network/interfaces.d/ifcfg-eth0
-
-}
-
-
-function create_ifcfg_br_mgmt {
-        echo "migrating br_mgmt"
-        echo "auto eth1.300" >> /etc/network/interfaces.d/ifcfg-eth1.300
-        echo "iface eth1.300 inet static" >> /etc/network/interfaces.d/ifcfg-eth1.300
-        echo "     address $BR_MGMT" >> /etc/network/interfaces.d/ifcfg-eth1.300
-        echo "     netmask $DEF_NETMASK" >> /etc/network/interfaces.d/ifcfg-eth1.300
-}
-
-function create_ifcfg_br_storage {
-        echo "migration br_storage"
-        echo "auto eth1.301" >> /etc/network/interfaces.d/ifcfg-eth1.301
-        echo "iface eth1.301 inet static" >> /etc/network/interfaces.d/ifcfg-eth1.301
-        echo "     address $BR_STORAGE" >> /etc/network/interfaces.d/ifcfg-eth1.301
-        echo "     netmask $DEF_NETMASK" >> /etc/network/interfaces.d/ifcfg-eth1.301
-}
-
-function create_ifcfg_br_fw_admin {
-        echo " migratinng br_fw_admin"
-        echo "auto eth1" >> /etc/network/interfaces.d/ifcfg-eth1
-        echo "iface eth1 inet static" >> /etc/network/interfaces.d/ifcfg-eth1
-        echo "     address $BR_FW_ADMIN" >> /etc/network/interfaces.d/ifcfg-eth1
-        echo "     netmask $DEF_NETMASK" >> /etc/network/interfaces.d/ifcfg-eth1
-}
-
-function create_ifcfg_eth0 {
-        echo "migratinng br-ex to eth0 - temporarily"
-        echo "auto eth0" >> /etc/network/interfaces.d/ifcfg-eth0
-        echo "iface eth0 inet static" >> /etc/network/interfaces.d/ifcfg-eth0
-        echo "     address $BR_EX" >> /etc/network/interfaces.d/ifcfg-eth0
-        echo "     netmask $DEF_NETMASK" >> /etc/network/interfaces.d/ifcfg-eth0
-        echo "     gateway $DEF_GW" >> /etc/network/interfaces.d/ifcfg-eth0
-}
-
-function set_mode {
-       if [ -d "/var/lib/glance/images" ]
-       then 
-               echo " controller "
-               MODE=0
-       else 
-               echo " compute "
-               MODE=1
-       fi
-}
-
-
-function stop_ovs {
-        echo "Stopping OpenVSwitch"
-        service openvswitch-switch stop
-
-}
-
-function start_ovs {
-        echo "Starting OVS"
-        service openvswitch-switch start
-        ovs-vsctl show
-}
-
-
-function clean_ovs {
-        echo "cleaning OVS DB"
-        stop_ovs
-        rm -rf /var/log/openvswitch/*
-        mkdir -p /opt/opnfv/odl/ovs_back
-        cp -pr /etc/openvswitch/* /opt/opnfv/odl/ovs_back/.
-        rm -rf /etc/openvswitch/conf.db
-        echo "restarting OVS - you should see Nothing there"
-        start_ovs
-}
-
-
-
-function reboot_me {
-        reboot
-}
-
-function allow_challenge {
-       sed -i -e 's/ChallengeResponseAuthentication no/ChallengeResponseAuthentication yes/g' /etc/ssh/sshd_config
-       service ssh restart
-}
-
-function clean_neutron {
-       subnets=( `neutron subnet-list | awk -F" " '{print $2}' | grep -v id | sed '/^$/d'` )
-       networks=( `neutron net-list | awk -F" " '{print $2}' | grep -v id | sed '/^$/d'` )
-       ports=( `neutron port-list | awk -F" " '{print $2}' | grep -v id | sed '/^$/d'` )
-       routers=( `neutron router-list | awk -F" " '{print $2}' | grep -v id | sed '/^$/d'` )
-
-       #display all elements
-       echo "SUBNETS: ${subnets[@]} "
-       echo "NETWORKS: ${networks[@]} "
-       echo "PORTS: ${ports[@]} "
-       echo "ROUTERS: ${routers[@]} "
-       
-       
-       # get port and subnet for each router
-       for i in "${routers[@]}"
-       do
-               routerport=( `neutron router-port-list $i | awk -F" " '{print $2}' | grep -v id |  sed '/^$/d' `)
-               routersnet=( `neutron router-port-list $i | awk -F" " '{print $8}' | grep -v fixed |  sed '/^$/d' | sed 's/,$//' | sed -e 's/^"//'  -e 's/"$//' `)
-       done
-
-       echo "ROUTER PORTS: ${routerport[@]} "
-       echo "ROUTER SUBNET: ${routersnet[@]} "
-       
-       #remove router subnets
-       echo "router-interface-delete"
-       for i in "${routersnet[@]}"
-       do
-               neutron router-interface-delete ${routers[0]} $i
-       done
-
-       #remove subnets
-       echo "subnet-delete"
-       for i in "${subnets[@]}"
-       do
-               neutron subnet-delete $i
-       done
-
-       #remove nets
-       echo "net-delete"
-       for i in "${networks[@]}"
-       do
-               neutron net-delete $i
-       done
-
-       #remove routers
-       echo "router-delete"
-       for i in "${routers[@]}"
-       do
-               neutron router-delete $i
-       done
-
-       #remove ports
-       echo "port-delete"
-       for i in "${ports[@]}"
-       do
-               neutron port-delete $i
-       done
-
-       #remove subnets
-       echo "subnet-delete second pass"
-       for i in "${subnets[@]}"
-       do
-               neutron subnet-delete $i
-       done
-
-}
-
-function set_dns {
-       sed -i -e 's/nameserver 10.20.0.2/nameserver $DNS/g' /etc/resolv.conf
-}
-
-
-#OUTPUT
-
-function check {
-       echo $BR_MGMT
-       echo $BR_STORAGE
-       echo $BR_FW_ADMIN
-       echo $BR_EX
-}
-
-### MAIN
-
-
-set_mode
-backup_ifcfg
-get_ips
-create_ifcfg_br_mgmt
-create_ifcfg_br_storage
-create_ifcfg_br_fw_admin
-if [ $MODE == "0" ]
-then
-        create_ifcfg_eth0
-fi
-allow_challenge
-clean_ovs
-check
-reboot_me
-
-
diff --git a/fuel/build/f_lith_odl_docker/puppet/modules/opnfv/scripts/config_net_odl.sh b/fuel/build/f_lith_odl_docker/puppet/modules/opnfv/scripts/config_net_odl.sh
deleted file mode 100755 (executable)
index 145da80..0000000
+++ /dev/null
@@ -1,192 +0,0 @@
-#!/bin/bash
-#
-# Author: Daniel Smith (Ericsson)
-#
-# Script to update neutron configuration for OVSDB/ODL integratino
-#
-#  Usage - Set / pass CONTROL_HOST to your needs
-#
-### SET THIS VALUE TO MATCH YOUR SYSTEM
-CONTROL_HOST=192.168.0.2
-BR_EX_IP=172.30.9.70
-
-# ENV
-source ~/openrc
-# VARS
-ML2_CONF=/etc/neutron/plugins/ml2/ml2_conf.ini
-MODE=0
-
-
-# FUNCTIONS
-# Update ml2_conf.ini
-function update_ml2conf {
-        echo "Backing up and modifying ml2_conf.ini"
-        cp $ML2_CONF $ML2_CONF.bak
-        sed -i -e 's/mechanism_drivers =openvswitch/mechanism_drivers = opendaylight/g' $ML2_CONF
-        sed -i -e 's/tenant_network_types = flat,vlan,gre,vxlan/tenant_network_types = vxlan/g' $ML2_CONF
-        sed -i -e 's/bridge_mappings=physnet2:br-prv/bridge_mappings=physnet1:br-ex/g' $ML2_CONF
-        echo "[ml2_odl]" >> $ML2_CONF
-        echo "password = admin" >> $ML2_CONF
-        echo "username = admin" >> $ML2_CONF
-        echo "url = http://${CONTROL_HOST}:8080/controller/nb/v2/neutron" >> $ML2_CONF
-}
-
-function reset_neutrondb {
-        echo "Reseting DB"
-        mysql -e "drop database if exists neutron_ml2;"
-        mysql -e "create database neutron_ml2 character set utf8;"
-        mysql -e "grant all on neutron_ml2.* to 'neutron'@'%';"
-        neutron-db-manage --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugin.ini upgrade head
-}
-
-function restart_neutron {
-        echo "Restarting Neutron Server"
-        service neutron-server restart
-        echo "Should see Neutron runing now"
-        service neutron-server status
-        echo "Shouldnt be any nets, but should work (return empty)"
-        neutron net-list
-}
-
-function stop_neutron {
-        echo "Stopping Neutron / OVS components"
-        service  neutron-plugin-openvswitch-agent stop
-        if [ $MODE == "0" ]
-        then
-                service neutron-server stop
-        fi
-}
-
-function disable_agent {
-       echo "Disabling Neutron Plugin Agents from running"
-       service neutron-plugin-openvswitch-agent stop
-       echo 'manual' > /etc/init/neutron-plugin-openvswitch-agent.override
-}
-
-
-
-function verify_ML2_working {
-        echo "checking that we can talk via ML2 properly"
-        curl -u admin:admin http://${CONTROL_HOST}:8080/controller/nb/v2/neutron/networks > /tmp/check_ml2
-        if grep "network" /tmp/check_ml2
-        then
-                echo "Success - ML2 to ODL is working"
-        else
-                echo "im sorry Jim, but its dead"
-        fi
-
-}
-
-
-function set_mode {
-        if [ -d "/var/lib/glance/images" ]
-        then
-                echo "Controller Mode"
-                MODE=0
-        else
-                echo "Compute Mode"
-                MODE=1
-        fi
-}
-
-function stop_ovs {
-        echo "Stopping OpenVSwitch"
-        service openvswitch-switch stop
-
-}
-
-function start_ovs {
-       echo "Starting OVS"
-       service openvswitch-vswitch start
-       ovs-vsctl show
-}
-
-
-function control_setup {
-        echo "Modifying Controller"
-        stop_neutron
-        stop_ovs
-       disable_agent
-        rm -rf /var/log/openvswitch/*
-        mkdir -p /opt/opnfv/odl/ovs_back
-        mv /etc/openvswitch/conf.db /opt/opnfv/odl/ovs_back/.
-        mv /etc/openvswitch/.conf*lock* /opt/opnfv/odl/ovs_back/.
-       rm -rf /etc/openvswitch/conf.db
-       rm -rf /etc/openvswitch/.conf*
-        service openvswitch-switch start
-        ovs-vsctl add-br br-ex
-        ovs-vsctl add-port br-ex eth0
-        ovs-vsctl set interface br-ex type=external
-        ifconfig br-ex 172.30.9.70/24 up
-        service neutron-server restart
-
-        echo "setting up networks"
-        ip link add link eth1 name br-mgmt type vlan id 300
-       ifconfig br-mgmt `grep address /etc/network/interfaces.d/ifcfg-br-mgmt | awk -F" " '{print $2}'`/24 up arp
-        ip link add link eth1 name br-storage type vlan id 301
-       ip link add link eth1 name br-prv type vlan id 1000
-       ifconfig br-storage `grep address /etc/network/interfaces.d/ifcfg-br-storage | awk -F" " '{print $2}'`/24 up arp
-       ifconfig eth1 `grep address /etc/network/interfaces.d/ifcfg-br-fw-admin | awk -F" " '{print $2}'`/24 up arp
-
-       echo "Setting ODL Manager IP"
-        ovs-vsctl set-manager tcp:192.168.0.2:6640
-
-        echo "Verifying ODL ML2 plugin is working"
-        verify_ML2_working
-
-       # BAD HACK - Should be parameterized - this is to catch up 
-       route add default gw 172.30.9.1
-
-}
-
-function clean_ovs {
-       echo "cleaning OVS DB"
-       stop_ovs
-       rm -rf /var/log/openvswitch/*
-       mkdir -p /opt/opnfv/odl/ovs_back
-       cp -pr /etc/openvswitch/* /opt/opnfv/odl/ovs_back/.
-       rm -rf /etc/openvswitch/conf.db
-       echo "restarting OVS - you should see Nothing there"
-       start_ovs
-}
-
-function compute_setup {
-        echo "Modifying Compute"
-        echo "Disabling neutron openvswitch plugin"
-        stop_neutron
-       disable_agent
-        ip link add link eth1 name br-mgmt type vlan id 300
-        ifconfig br-mgmt `grep address /etc/network/interfaces.d/ifcfg-br-mgmt | awk -F" " '{print $2}'`/24 up arp
-        ip link add link eth1 name br-storage type vlan id 301
-       ip link add link eth1 name br-prv type vlan id 1000
-        ifconfig br-storage `grep address /etc/network/interfaces.d/ifcfg-br-storage | awk -F" " '{print $2}'`/24 up arp
-        ifconfig eth1 `grep address /etc/network/interfaces.d/ifcfg-br-fw-admin | awk -F" " '{print $2}'`/24 up arp
-
-        echo "set manager, and route for ODL controller"
-        ovs-vsctl set-manager tcp:192.168.0.2:6640
-        route add 172.17.0.1 gw 192.168.0.2
-        verify_ML2_working
-}
-
-
-# MAIN
-echo "Starting to make call"
-update_ml2conf
-echo "Check Mode"
-set_mode
-
-if [ $MODE == "0" ];
-then
-        echo "Calling control setup"
-        control_setup
-elif [ $MODE == "1" ];
-then
-        echo "Calling compute setup"
-        compute_setup
-
-else
-        echo "Something is bad - call for help"
-        exit
-fi
-
-
diff --git a/fuel/build/f_lith_odl_docker/puppet/modules/opnfv/scripts/stage_odl.sh b/fuel/build/f_lith_odl_docker/puppet/modules/opnfv/scripts/stage_odl.sh
deleted file mode 100755 (executable)
index fa14b47..0000000
+++ /dev/null
@@ -1,54 +0,0 @@
-#!/bin/bash
-#   Author: Daniel Smith (Ericsson)
-#   Stages ODL Controlleer
-#   Inputs:  odl_docker_image.tar
-#   Usage:  ./stage_odl.sh
-
-# ENVS
-source ~/.bashrc
-source ~/openrc
-
-LOCALPATH=/opt/opnfv/odl
-DOCKERBIN=docker-latest
-ODLIMGNAME=odl_docker_image.tar
-DNS=8.8.8.8
-HOST_IP=`ifconfig br-ex | grep -i "inet addr" | awk -F":" '{print $2}' | awk -F" " '{print $1}'`
-
-
-
-# DEBUG ECHOS
-echo $LOCALPATH
-echo $DOCKERBIN
-echo $ODLIMGNAME
-echo $DNS
-echo $HOST_IP
-
-
-# Set DNS to someting external and default GW - ODL requires a connection to the internet
-sed -i -e 's/nameserver 10.20.0.2/nameserver 8.8.8.8/g' /etc/resolv.conf
-route delete default gw 10.20.0.2
-route add default gw 172.30.9.1
-
-# Start Docker daemon and in background
-echo "Starting Docker"
-chmod +x $LOCALPATH/$DOCKERBIN
-$LOCALPATH/$DOCKERBIN -d &
-#courtesy sleep for virtual env
-sleep 2
-
-# Import the ODL Container
-echo "Importing ODL Container"
-$LOCALPATH/$DOCKERBIN load -i $LOCALPATH/$ODLIMGNAME
-
-# Start ODL, load DLUX and OVSDB modules
-echo "Removing any old install found - file not found is ok here"
-$LOCALPATH/$DOCKERBIN rm odl_docker
-echo "Starting up ODL controller in Daemon mode - no shell possible"
-$LOCALPATH/$DOCKERBIN  run --name odl_docker -p 8181:8181 -p 8185:8185 -p 9000:9000 -p 1099:1099 -p 8101:8101 -p 6633:6633 -p 43506:43506 -p 44444:44444 -p 6653:6653 -p 12001:12001 -p 6400:6400 -p 6640:6640 -p 8080:8080 -p 7800:7800 -p 55130:55130 -p 52150:52150 -p 36826:26826 -i -d -t loving_daniel
-
-# Following, you should see the docker ps listed and a port opened
-echo " you should reach ODL controller at http://HOST_IP:8181/dlux/index.html"
-$LOCALPATH/$DOCKERBINNAME ps -a
-netstat -lnt
-
-
diff --git a/fuel/build/f_lith_odl_docker/puppet/modules/opnfv/scripts/start_odl_container.sh b/fuel/build/f_lith_odl_docker/puppet/modules/opnfv/scripts/start_odl_container.sh
deleted file mode 100755 (executable)
index 7b91f4f..0000000
+++ /dev/null
@@ -1,95 +0,0 @@
-#!/bin/bash
-#  Ericsson Canada Inc.
-#  Authoer: Daniel Smith
-#
-#   A helper script to install and setup the ODL docker container on the controller
-#
-#
-#   Inputs:  odl_docker_image.tar
-#
-#   Usage:  ./start_odl_docker.sh
-echo "DEPRECATED - USE stage_odl.sh instead  - this will be removed shortly once automated deployment is working - SR1"
-
-
-# ENVS
-source ~/.bashrc
-source ~/openrc
-
-# VARS
-
-# Switch for Dev mode - uses apt-get on control to cheat and get docker installed locally rather than from puppet source
-
-DEV=1
-
-# Switch for 1:1 port mapping of EXPOSED ports in Docker to the host, if set to 0, then random ports will be used - NOTE: this doesnt work for all web services X port on Host --> Y port in Container,
-# especially for SSL/HTTPS cases. Be aware.
-
-MATCH_PORT=1
-
-LOCALPATH=/opt/opnfv/odl
-DOCKERBINNAME=docker-latest
-DOCKERIMAGENAME=odl_docker_image.tar
-DNS=8.8.8.8
-HOST_IP=`ifconfig br-fw-admin  | grep -i "inet addr" | awk -F":" '{print $2}' | awk -F" " '{print $1}'`
-
-
-# Set this to "1" if you want to have your docker container startup into a shell
-
-
-ENABLE_SHELL=1
-
-
-echo " Fetching Docker "
-if [ "$DEV" -eq "1" ];
-# If testing Locally (on a control node) you can set DEV=1 to enable apt-get based install on the control node (not desired target, but good for testing).
-then
-        echo "Dev Mode - Fetching from Internet";
-        echo " this wont work in production builds";
-        apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys 36A1D7869245C8950F966E92D8576A8BA88D21E9
-        mkdir -p $LOCALPATH
-        wget https://get.docker.com/builds/Linux/x86_64/docker-latest -O $LOCALPATH/$DOCKERBINNAME
-        wget http://ftp.us.debian.org/debian/pool/main/d/docker.io/docker.io_1.3.3~dfsg1-2_amd64.deb
-        chmod 777 $LOCALPATH/$DOCKERBINNAME
-        echo "done ";
-else
-        echo "Using Binaries delivered from Puppet"
-       echo "Starting Docker in Daemon mode"
-       chmod +x $LOCALPATH/$DOCKERBINNAME
-       $LOCALPATH/$DOCKERBINNAME -d &
-
-  # wait until docker will be fully initialized
-  # before any further action against just started docker
-  sleep 5
-fi
-
-
-# We need to perform some cleanup of the Openstack Environment
-echo "TODO -- This should be automated in the Fuel deployment at some point"
-echo "However, the timing should come after basic tests are running, since this "
-echo " part will remove the subnet router association that is deployed automativally"
-echo " via fuel. Refer to the ODL + Openstack Integration Page "
-
-# Import the ODL container into docker
-
-echo "Importing ODL container into docker"
-$LOCALPATH/$DOCKERBINNAME load -i $LOCALPATH/$DOCKERIMAGENAME
-
-echo " starting up ODL - DLUX and Mapping Ports"
-if [ "$MATCH_PORT" -eq "1" ]
-then
-        echo "Starting up Docker..."
-        $LOCALPATH/$DOCKERBINNAME rm odl_docker
-fi
-
-if [ "$ENABLE_SHELL" -eq "1" ];
-then
-        echo "Starting Container in Interactive Mode (/bin/bash will be provided, you will need to run ./start_odl_docker.sh inside the container yourself)"
-        $LOCALPATH/$DOCKERBINNAME run --name odl_docker -p 8181:8181 -p 8185:8185 -p 9000:9000 -p 1099:1099 -p 8101:8101 -p 6633:6633 -p 43506:43506 -p 44444:44444 -p 6653:6653 -p 12001:12001 -p 6400:6400 -p 6640:6640 -p 8080:8080 -p 7800:7800 -p 55130:55130 -p 52150:52150 -p 36826:26826 -i -t loving_daniel  /bin/bash
-else
-        echo "Starting Container in Daemon mode - no shell will be provided and docker attach will not provide shell)"
-        $LOCALPATH/$DOCKERBINNAME run --name odl_docker -p 8181:8181 -p 8185:8185 -p 9000:9000 -p 1099:1099 -p 8101:8101 -p 6633:6633 -p 43506:43506 -p 44444:44444 -p 6653:6653 -p 12001:12001 -p 6400:6400 -p 6640:6640 -p 8080:8080 -p 7800:7800 -p 55130:55130 -p 52150:52150 -p 36826:26826 -i -d -t loving_daniel
-        echo "should see the process listed here in docker ps -a"
-        $LOCALPATH/$DOCKERBINNAME ps -a;
-        echo "Match Port  enabled, you can reach the DLUX login at: "
-        echo "http://$HOST_IP:8181/dlux.index.html"
-fi
diff --git a/fuel/build/f_lith_odl_docker/scripts/config_net_odl.sh b/fuel/build/f_lith_odl_docker/scripts/config_net_odl.sh
deleted file mode 100644 (file)
index d292acd..0000000
+++ /dev/null
@@ -1,164 +0,0 @@
-#!/bin/bash
-#
-# Author: Daniel Smith (Ericsson)
-#
-# Script to update neutron configuration for OVSDB/ODL integratino
-#
-#  Usage - Set / pass CONTROL_HOST to your needs
-#
-CONTROL_HOST=172.30.9.70
-
-# ENV
-source ~/openrc
-
-# VARS
-ML2_CONF=/etc/neutron/plugins/ml2/ml2_conf.ini
-MODE=0
-
-
-# FUNCTIONS
-
-# Update ml2_conf.ini
-function update_ml2conf {
-        echo "Backing up and modifying ml2_conf.ini"
-        cp $ML2_CONF $ML2_CONF.bak
-        sed -i -e 's/mechanism_drivers =openvswitch/mechanism_drivers = opendaylight/g' $ML2_CONF
-        sed -i -e 's/tenant_network_types = flat,vlan,gre,vxlan/tenant_network_types = vxlan/g' $ML2_CONF
-        cat "[ml2_odl]" >> $ML2_CONF
-        cat "password = admin" >> $ML2_CONF
-        cat "username = admin" >> $ML2_CONF
-        cat "url = http://${CONTROL_HOST}:8080/controller/nb/v2/neutron" >> $ML2_CONF
-}
-
-function reset_neutrondb {
-        echo "Reseting DB"
-        mysql -e "drop database if exists neutron_ml2;"
-        mysql -e "create database neutron_ml2 character set utf8;"
-        mysql -e "grant all on neutron_ml2.* to 'neutron'@'%';"
-        neutron-db-manage --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugin.ini upgrade head
-}
-
-function restart_neutron {
-        echo "Restarting Neutron Server"
-        service neutron-server restart
-        echo "Should see Neutron runing now"
-        service neutron-server status
-        echo "Shouldnt be any nets, but should work (return empty)"
-        neutron net-list
-}
-
-function stop_neutron {
-        echo "Stopping Neutron / OVS components"
-        service  neutron-plugin-openvswitch-agent stop
-        if [ $MODE == "0" ]
-        then
-                service neutron-server stop
-        fi
-}
-
-
-
-function verify_ML2_working {
-        echo "checking that we can talk via ML2 properly"
-        curl -u admin:admin http://${CONTROL_HOST}:8080/controller/nb/v2/neutron/networks > /tmp/check_ml2
-        if grep "network" /tmp/check_ml2
-        then
-                echo "Success - ML2 to ODL is working"
-        else
-                echo "im sorry Jim, but its dead"
-        fi
-
-}
-
-
-function set_mode {
-        if ls -l /var/lib/glance/images
-        then
-                echo "Controller Mode"
-                MODE=0
-        else
-                echo "Compute Mode"
-                MODE=1
-        fi
-}
-
-function stop_ovs {
-        echo "Stopping OpenVSwitch"
-        service openvswitch-switch stop
-
-}
-
-function control_setup {
-        echo "Modifying Controller"
-        stop_neutron
-        stop_ovs
-        rm -rf /var/log/openvswitch/*
-        mkdir -p /opt/opnfv/odl/ovs_back
-        mv /etc/openvswitch/conf.db /opt/opnfv/odl/ovs_back/.
-        mv /etc/openvswitch/.conf*lock* /opt/opnfv/odl/ovs_back/.
-        service openvswitch-switch start
-        ovs-vsctl set-manager tcp:172.30.9.70:6640
-        ovs-vsctl add-br br-eth0
-        ovs-vsctl add-br br-ex
-        ovs-vsctl add-port br-eth0 eth0
-        ovs-vsctl add-port br-eth0 br-eth0--br-ex
-        ovs-vsctl add-port br-ex br-ex--br-eth0
-        ovs-vsctl set interface br-ex--br-eth0 type=patch
-        ovs-vsctl set interface br-eth0--br-ex type=patch
-        ovs-vsctl set interface br-ex--br-eth0 options:peer=br-eth0--br-ex
-        ovs-vsctl set interface br-eth0--br-ex options:peer=br-ex--br-eth0
-        ifconfig br-ex 172.30.9.70/24 up
-        service neutron-server restart
-
-        echo "setting up networks"
-        ip link add link eth1 name br-mgmt type vlan id 300
-        ip link add link eth1 name br-storage type vlan id 301
-        /etc/init.d/networking restart
-
-
-        echo "Reset Neutron DB"
-        #reset_neutrondb
-        echo "Restarting Neutron Components"
-        #restart_neutron
-        echo "Verifying ODL ML2 plugin is working"
-        verify_ML2_working
-
-}
-
-function compute_setup {
-        echo "do compute stuff here"
-        echo "stopping neutron openvswitch plugin"
-        stop_neutron
-        ip link add link eth1 name br-mgmt type vlan id 300
-        ifconfig br-mgmt `grep address /etc/network/interfaces.d/ifcfg-br-mgmt | awk -F" " '{print $2}'`/24
-        ip link add link eth1 name br-storage type vlan id 301
-        ifconfig br-storage `grep address /etc/network/interfaces.d/ifcfg-br-storage | awk -F" " '{print $2}'`/24
-        ifconfig eth1 `grep address /etc/network/interfaces.d/ifcfg-br-fw-mgmt | awk -F" " '{print $2}'`/24
-        echo "set manager, and route for ODL controller"
-        ovs-vsctl set-manager tcp:192.168.0.2:6640
-        route add 172.17.0.1 gw 192.168.0.2
-        verify_ML2_working
-}
-
-
-# MAIN
-echo "Starting to make call"
-update_ml2conf
-echo "Check Mode"
-set_mode
-
-if [ $MODE == "0" ];
-then
-        echo "Calling control setup"
-        control_setup
-elif [ $MODE == "1" ];
-then
-        echo "Calling compute setup"
-        compute_setup
-
-else
-        echo "Something is bad - call for help"
-        exit
-fi
-
-
diff --git a/fuel/build/f_lith_odl_docker/scripts/config_neutron_for_odl.sh b/fuel/build/f_lith_odl_docker/scripts/config_neutron_for_odl.sh
deleted file mode 100644 (file)
index 3b688ae..0000000
+++ /dev/null
@@ -1,146 +0,0 @@
-#!/bin/bash
-CONTROL_HOST=172.17.0.3
-
-# ENV
-source ~/openrc
-
-
-
-# VARS
-ML2_CONF=/etc/neutron/plugins/ml2/ml2_conf.ini
-MODE=0
-
-
-# FUCNTIONS
-
-
-# Update ml2_conf.ini
-function update_ml2conf {
-        echo "Backing up and modifying ml2_conf.ini"
-        cp $ML2_CONF $ML2_CONF.bak
-        sed -i -e 's/mechanism_drivers =openvswitch/mechanism_drivers = opendaylight/g' $ML2_CONF
-#!/bin/bash
-CONTROL_HOST=172.17.0.3
-
-# ENV
-source ~/openrc
-
-
-
-# VARS
-ML2_CONF=/etc/neutron/plugins/ml2/ml2_conf.ini
-MODE=0
-
-
-# FUCNTIONS
-
-
-# Update ml2_conf.ini
-function update_ml2conf {
-        echo "Backing up and modifying ml2_conf.ini"
-        cp $ML2_CONF $ML2_CONF.bak
-        sed -i -e 's/mechanism_drivers =openvswitch/mechanism_drivers = opendaylight/g' $ML2_CONF
-        sed -i -e 's/tenant_network_types = flat,vlan,gre,vxlan/tenant_network_types = vxlan/g' $ML2_CONF
-        cat "[ml2_odl]" >> $ML2_CONF
-        cat "password = admin" >> $ML2_CONF
-        cat "username = admin" >> $ML2_CONF
-        cat "url = http://${CONTROL_HOST}:8080/controller/nb/v2/neutron" >> $ML2_CONF
-}
-
-function reset_neutrondb {
-        echo "Reseting DB"
-        mysql -e "drop database if exists neutron_ml2;"
-        mysql -e "create database neutron_ml2 character set utf8;"
-        mysql -e "grant all on neutron_ml2.* to 'neutron'@'%';"
-        neutron-db-manage --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugin.ini upgrade head
-}
-
-function restart_neutron {
-        echo "Restarting Neutron Server"
-        service neutron-server restart
-        echo "Should see Neutron runing now"
-        service neutron-server status
-        echo "Shouldnt be any nets, but should work (return empty)"
-        neutron net-list
-}
-
-function stop_neutron {
-        echo "Stopping Neutron / OVS components"
-        service  neutron-plugin-openvswitch-agent stop
-        if [ $MODE == "0" ]
-        then
-                service neutron-server stop
-        fi
-}
-
-
-
-function verify_ML2_working {
-        echo "checking that we can talk via ML2 properly"
-        curl -u admin:admin http://${CONTROL_HOST}:8080/controller/nb/v2/neutron/networks > /tmp/check_ml2
-        if grep "network" /tmp/check_ml2
-        then
-                echo "Success - ML2 to ODL is working"
-        else
-                echo "im sorry Jim, but its dead"
-        fi
-
-}
-
-
-function set_mode {
-        if df -k | grep glance
-        then
-                echo "Controller Mode"
-                MODE=0
-        else
-                echo "Compute Mode"
-                MODE=1
-        fi
-}
-
-function stop_ovs {
-        echo "Stopping OpenVSwitch"
-        service openvswitch-switch stop
-
-}
-
-function control_setup {
-        echo "do control stuff here"
-        echo "Reset Neutron DB"
-        #reset_neutrondb
-        echo "Restarting Neutron Components"
-        #restart_neutron
-        echo "Verifying ODL ML2 plugin is working"
-        verify_ML2_working
-
-}
-
-function compute_setup {
-        echo "do compute stuff here"
-        stop_neutron
-        verify_ML2_working
-}
-
-
-# MAIN
-echo "Starting to make call"
-#update_ml2conf
-echo "Check Mode"
-set_mode
-
-if [ $MODE == "0" ];
-then
-        echo "Calling control setup"
-        control_setup
-elif [ $MODE == "1" ];
-then
-        echo "Calling compute setup"
-        compute_setup
-
-else
-        echo "Something is bad - call for help"
-        exit
-fi
-
-
diff --git a/fuel/build/f_lith_odl_docker/scripts/prep_nets_for_odl.sh b/fuel/build/f_lith_odl_docker/scripts/prep_nets_for_odl.sh
deleted file mode 100755 (executable)
index dd4fc9f..0000000
+++ /dev/null
@@ -1,90 +0,0 @@
-#!/bin/bash
-# a "cheat" way to install docker on the controller
-# can only be used if you have a connecting out to the internet
-
-# Usage: ./install_docker.sh <ip of default route to remove> <ip of default gw to add>
-
-OLDGW=$1
-#!/bin/bash
-# a "cheat" way to install docker on the controller
-# can only be used if you have a connecting out to the internet
-
-# Usage: ./install_docker.sh <ip of default route to remove> <ip of default gw to add>
-
-OLDGW=$1
-NEWGW=$2
-IMAGEPATH=/opt/opnfv
-IMAGENAME=odl_docker_image.tar
-SOURCES=/etc/apt/sources.list
-
-
-if [ "$#" -ne 2]; then
-        echo "Two args not provided, will not touch networking"
-else
-
-        # Fix routes
-        echo "Fixing routes"
-        #DEBUG
-        netstat -rn
-
-        echo "delete old def route"
-        route delete default gw $1
-        echo "adding new def route"
-        route add default gw $2
-
-        echo " you should see a good nslookup now"
-        nslookup www.google.ca
-#!/bin/bash
-# a "cheat" way to install docker on the controller
-# can only be used if you have a connecting out to the internet
-
-# Usage: ./install_docker.sh <ip of default route to remove> <ip of default gw to add>
-
-OLDGW=$1
-NEWGW=$2
-IMAGEPATH=/opt/opnfv
-IMAGENAME=odl_docker_image.tar
-SOURCES=/etc/apt/sources.list
-
-
-if [ "$#" -ne 2]; then
-        echo "Two args not provided, will not touch networking"
-else
-
-        # Fix routes
-        echo "Fixing routes"
-        #DEBUG
-        netstat -rn
-
-        echo "delete old def route"
-        route delete default gw $1
-        echo "adding new def route"
-        route add default gw $2
-
-        echo " you should see a good nslookup now"
-        nslookup www.google.ca
-fi
-
-
-if egrep "mirrors.txt" $SOURCES
-then
-        echo "Sources was already updated, not touching"
-else
-        echo "adding the closests mirrors and docker mirror to the mix"
-        echo "deb mirror://mirrors.ubuntu.com/mirrors.txt precise main restricted universe multiverse" >> /etc/apt/sources.list
-        echo "deb mirror://mirrors.ubuntu.com/mirrors.txt precise-updates main restricted universe multiverse" >> /etc/apt/sources.list
-        echo "deb mirror://mirrors.ubuntu.com/mirrors.txt precise-backports main restricted universe multiverse" >> /etc/apt/sources.list
-        echo "deb mirror://mirrors.ubuntu.com/mirrors.txt precise-security main restricted universe multiverse" >> /etc/apt/sources.list
-        apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys 36A1D7869245C8950F966E92D8576A8BA88D21E9
-        echo "deb https://get.docker.com/ubuntu docker main " > /etc/apt/sources.list.d/docker.list
-fi
-
-echo "Updating"
-apt-get update
-echo "Installing Docker"
-apt-get install -y lxc-docker
-
-echo "Loading ODL Docker Image"
-docker load -i $IMAGEPATH/$IMAGENAME
-
-
diff --git a/fuel/build/f_lith_odl_docker/scripts/setup_ovs_for_odl.sh b/fuel/build/f_lith_odl_docker/scripts/setup_ovs_for_odl.sh
deleted file mode 100644 (file)
index 42c9451..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
-#!/bin/bash
-
-
-
-ok .. so they created br-int
-
-so lets add a physical nic to it
-
-
-# First - Removal all the bridges you find
-
-for i in $(ovs-vsctl list-br)
-do
-       if [ "$i" == "br-int" ];
-       then    
-               echo "skipped br-int"
-       elif [ "$i" == "br-prv"];
-       then
-               echo "skipped br-pr"
-       else
-               ovs-vsctl del-br $i
-       fi
-done
index 436f496..54f1c86 100644 (file)
@@ -25,6 +25,4 @@ class opnfv {
   include opnfv::add_packages
   # Setup OpenDaylight
   include opnfv::odl_docker
   include opnfv::add_packages
   # Setup OpenDaylight
   include opnfv::odl_docker
-  # Setup OpenDaylight
-  include opnfv::odl_lith_docker
 }
 }