echo -e "\n -static_ip_range : static IP range to define when using virtual and when dhcp is not being used (default), must at least a 20 IP block. Format: '192.168.1.1,192.168.1.20' \n"
echo -e "\n -ping_site : site to use to verify IP connectivity from the VM when -virtual is used. Format: -ping_site www.blah.com \n"
echo -e "\n -floating_ip_count : number of IP address from the public range to be used for floating IP. Default is 20.\n"
+ echo -e "\n -admin_nic : Baremetal NIC for the admin network. Required if other "nic" arguments are used. \
+Not applicable with -virtual. Example: -admin_nic em1"
+ echo -e "\n -private_nic : Baremetal NIC for the private network. Required if other "nic" arguments are used. \
+Not applicable with -virtual. Example: -private_nic em2"
+ echo -e "\n -public_nic : Baremetal NIC for the public network. Required if other "nic" arguments are used. \
+Can also be used with -virtual. Example: -public_nic em3"
+ echo -e "\n -storage_nic : Baremetal NIC for the storage network. Optional. Not applicable with -virtual. \
+Private NIC will be used for storage if not specified. Example: -storage_nic em4"
}
##verify vm dir exists
floating_ip_count=$2
shift 2
;;
+ -admin_nic)
+ admin_nic=$2
+ shift 2
+ nic_arg_flag=1
+ ;;
+ -private_nic)
+ private_nic=$2
+ shift 2
+ nic_arg_flag=1
+ ;;
+ -public_nic)
+ public_nic=$2
+ shift 2
+ nic_arg_flag=1
+ ;;
+ -storage_nic)
+ storage_nic=$2
+ shift 2
+ nic_arg_flag=1
+ ;;
*)
display_usage
exit 1
if [ -z "$floating_ip_count" ]; then
floating_ip_count=20
fi
+
+ ##Validate nic args
+ if [[ $nic_arg_flag -eq 1 ]]; then
+ if [ -z "$virtual" ]; then
+ for nic_type in admin_nic private_nic public_nic; do
+ eval "nic_value=\$$nic_type"
+ if [ -z "$nic_value" ]; then
+ echo "${red}$nic_type is empty or not defined. Required when other nic args are given!${reset}"
+ exit 1
+ fi
+ interface_ip=$(find_ip $nic_value)
+ if [ ! "$interface_ip" ]; then
+ echo "${red}$nic_value does not have an IP address! Exiting... ${reset}"
+ exit 1
+ fi
+ done
+ else
+ ##if virtual only public_nic should be specified
+ for nic_type in admin_nic private_nic storage_nic; do
+ eval "nic_value=\$$nic_type"
+ if [ ! -z "$nic_value" ]; then
+ echo "${red}$nic_type is not a valid argument using -virtual. Please only specify public_nic!${reset}"
+ exit 1
+ fi
+ done
+
+ interface_ip=$(find_ip $public_nic)
+ if [ ! "$interface_ip" ]; then
+ echo "${red}Public NIC: $public_nic does not have an IP address! Exiting... ${reset}"
+ exit 1
+ fi
+ fi
+ fi
}
##disable selinux
fi
##add centos 7 box to vagrant
- if ! vagrant box list | grep chef/centos-7.0; then
- if ! vagrant box add chef/centos-7.0 --provider virtualbox; then
+ if ! vagrant box list | grep opnfv/centos-7.0; then
+ if ! vagrant box add opnfv/centos-7.0 --provider virtualbox; then
printf '%s\n' 'deploy.sh: Unable to download centos7 box for Vagrant' >&2
exit 1
fi
}
##clone genesis and move to node vm dir
- ##params: none
- ##usage: clone_bgs
+ ##params: destination directory
+ ##usage: clone_bgs /tmp/myvm/
clone_bgs() {
- cd /tmp/
- rm -rf /tmp/genesis/
-
- ##clone artifacts and move into foreman_vm dir
- if ! GIT_SSL_NO_VERIFY=true git clone https://gerrit.opnfv.org/gerrit/genesis.git; then
- printf '%s\n' 'deploy.sh: Unable to clone genesis repo' >&2
- exit 1
- fi
-
- mv -f /tmp/genesis/foreman/ci $vm_dir/foreman_vm
- rm -rf /tmp/genesis/
+ script=`realpath $0`
+ script_dir="`dirname "$script"`"
+ cp -fr $script_dir/ $1
+ cp -fr $script_dir/../../common/puppet-opnfv $1
}
##validates the network settings and update VagrantFile with network settings
configure_network() {
cd $vm_dir/foreman_vm
- echo "${blue}Detecting network configuration...${reset}"
- ##detect host 1 or 3 interface configuration
- #output=`ip link show | grep -E "^[0-9]" | grep -Ev ": lo|tun|virbr|vboxnet" | awk '{print $2}' | sed 's/://'`
- output=`ifconfig | grep -E "^[a-zA-Z0-9]+:"| grep -Ev "lo|tun|virbr|vboxnet" | awk '{print $1}' | sed 's/://'`
+ ##if nic_arg_flag is set, then we don't figure out
+ ##NICs dynamically
+ if [[ $nic_arg_flag -eq 1 ]]; then
+ echo "${blue}Static Network Interfaces Defined. Updating Vagrantfile...${reset}"
+ if [ $virtual ]; then
+ nic_list="$public_nic"
+ elif [ -z "$storage_nic" ]; then
+ echo "${blue}storage_nic not defined, will combine storage into private VLAN ${reset}"
+ nic_list="$admin_nic $private_nic $public_nic"
+ else
+ nic_list="$admin_nic $private_nic $public_nic $storage_nic"
+ fi
+ nic_array=( $nic_list )
+ output=$nic_list
+ else
+ echo "${blue}Detecting network configuration...${reset}"
+ ##detect host 1 or 3 interface configuration
+ #output=`ip link show | grep -E "^[0-9]" | grep -Ev ": lo|tun|virbr|vboxnet" | awk '{print $2}' | sed 's/://'`
+ output=`/bin/ls -l /sys/class/net | tail -n +2 | grep -v virtual | cut -d " " -f9`
+ fi
if [ ! "$output" ]; then
printf '%s\n' 'deploy.sh: Unable to detect interfaces to bridge to' >&2
##virtual we only find 1 interface
if [ $virtual ]; then
- ##find interface with default gateway
- this_default_gw=$(ip route | grep default | awk '{print $3}')
- echo "${blue}Default Gateway: $this_default_gw ${reset}"
- this_default_gw_interface=$(ip route get $this_default_gw | awk '{print $3}')
+ if [ ! -z "${nic_array[0]}" ]; then
+ echo "${blue}Public Interface specified: ${nic_array[0]}${reset}"
+ this_default_gw_interface=${nic_array[0]}
+ else
+ ##find interface with default gateway
+ this_default_gw=$(ip route | grep default | awk '{print $3}')
+ echo "${blue}Default Gateway: $this_default_gw ${reset}"
+ this_default_gw_interface=$(ip route get $this_default_gw | awk '{print $3}')
+ fi
##find interface IP, make sure its valid
interface_ip=$(find_ip $this_default_gw_interface)
fi
fi
+ nodes=`sed -nr '/nodes:/{:start /workaround/!{N;b start};//p}' opnfv_ksgen_settings.yml | sed -n '/^ [A-Za-z0-9]\+:$/p' | sed 's/\s*//g' | sed 's/://g'`
+ controller_nodes=`echo $nodes | tr " " "\n" | grep controller | tr "\n" " "`
+ echo "${blue}Controller nodes found in settings: ${controller_nodes}${reset}"
+ my_controller_array=( $controller_nodes )
+ num_control_nodes=${#my_controller_array[@]}
+ if [ "$num_control_nodes" -ne 3 ]; then
+ if cat opnfv_ksgen_settings.yml | grep ha_flag | grep true; then
+ echo "${red}Error: You must define exactly 3 control nodes when HA flag is true!${reset}"
+ exit 1
+ fi
+ else
+ echo "${blue}Number of Controller nodes detected: ${num_control_nodes}${reset}"
+ fi
+
if [ $no_parse ]; then
echo "${blue}Skipping parsing variables into settings file as no_parse flag is set${reset}"
rm -rf /tmp/genesis/
##clone genesis and move into node folder
- if ! GIT_SSL_NO_VERIFY=true git clone https://gerrit.opnfv.org/gerrit/genesis.git; then
- printf '%s\n' 'deploy.sh: Unable to clone vagrant repo' >&2
- exit 1
- fi
-
- mv -f /tmp/genesis/foreman/ci $vm_dir/$node
- rm -rf /tmp/genesis/
+ clone_bgs $vm_dir/$node
cd $vm_dir/$node
sleep 1400
fi
- ##find number of interfaces with ip and substitute in VagrantFile
- output=`ifconfig | grep -E "^[a-zA-Z0-9]+:"| grep -Ev "lo|tun|virbr|vboxnet" | awk '{print $1}' | sed 's/://'`
-
- if [ ! "$output" ]; then
- printf '%s\n' 'deploy.sh: Unable to detect interfaces to bridge to' >&2
+ ## Add Admin interface
+ mac_string=config_nodes_${node}_mac_address
+ mac_addr=$(eval echo \$$mac_string)
+ mac_addr=$(echo $mac_addr | sed 's/:\|-//g')
+ if [ $mac_addr == "" ]; then
+ echo "${red} Unable to find mac_address for $node! ${reset}"
exit 1
fi
+ this_admin_ip=${admin_ip_arr[$node]}
+ sed -i 's/^.*eth_replace0.*$/ config.vm.network "private_network", virtualbox__intnet: "my_admin_network", ip: '\""$this_admin_ip"\"', netmask: '\""$admin_subnet_mask"\"', :mac => '\""$mac_addr"\"'/' Vagrantfile
- if_counter=0
- for interface in ${output}; do
-
- if [ -z "$enable_virtual_dhcp" ]; then
- if [ "$if_counter" -ge 1 ]; then
- break
- fi
- elif [ "$if_counter" -ge 4 ]; then
- break
- fi
- interface_ip=$(find_ip $interface)
- if [ ! "$interface_ip" ]; then
- continue
- fi
- case "${if_counter}" in
- 0)
- mac_string=config_nodes_${node}_mac_address
- mac_addr=$(eval echo \$$mac_string)
- mac_addr=$(echo $mac_addr | sed 's/:\|-//g')
- if [ $mac_addr == "" ]; then
- echo "${red} Unable to find mac_address for $node! ${reset}"
- exit 1
- fi
- ;;
- 1)
- if [ "$node_type" == "controller" ]; then
- mac_string=config_nodes_${node}_private_mac
- mac_addr=$(eval echo \$$mac_string)
- if [ $mac_addr == "" ]; then
- echo "${red} Unable to find private_mac for $node! ${reset}"
- exit 1
- fi
- else
- ##generate random mac
- mac_addr=$(echo -n 00-60-2F; dd bs=1 count=3 if=/dev/random 2>/dev/null |hexdump -v -e '/1 "-%02X"')
- fi
- mac_addr=$(echo $mac_addr | sed 's/:\|-//g')
- ;;
- *)
- mac_addr=$(echo -n 00-60-2F; dd bs=1 count=3 if=/dev/random 2>/dev/null |hexdump -v -e '/1 "-%02X"')
- mac_addr=$(echo $mac_addr | sed 's/:\|-//g')
- ;;
- esac
- this_admin_ip=${admin_ip_arr[$node]}
- sed -i 's/^.*eth_replace'"$if_counter"'.*$/ config.vm.network "private_network", virtualbox__intnet: "my_admin_network", ip: '\""$this_admin_ip"\"', netmask: '\""$admin_subnet_mask"\"', :mac => '\""$mac_addr"\"'/' Vagrantfile
- ((if_counter++))
- done
- ##now remove interface config in Vagrantfile for 1 node
- ##if 1, 3, or 4 interfaces set deployment type
- ##if 2 interfaces remove 2nd interface and set deployment type
- if [[ "$if_counter" == 1 || "$if_counter" == 2 ]]; then
- deployment_type="single_network"
- if [ "$node_type" == "controller" ]; then
- mac_string=config_nodes_${node}_private_mac
- mac_addr=$(eval echo \$$mac_string)
- if [ $mac_addr == "" ]; then
- echo "${red} Unable to find private_mac for $node! ${reset}"
- exit 1
- fi
- else
- ##generate random mac
- mac_addr=$(echo -n 00-60-2F; dd bs=1 count=3 if=/dev/random 2>/dev/null |hexdump -v -e '/1 "-%02X"')
- fi
- mac_addr=$(echo $mac_addr | sed 's/:\|-//g')
- if [ "$node_type" == "controller" ]; then
- new_node_ip=${controllers_ip_arr[$controller_count]}
- if [ ! "$new_node_ip" ]; then
- echo "{red}ERROR: Empty node ip for controller $controller_count ${reset}"
- exit 1
- fi
- ((controller_count++))
- else
- next_private_ip=$(next_ip $next_private_ip)
- if [ ! "$next_private_ip" ]; then
- echo "{red}ERROR: Could not find private ip for $node ${reset}"
+ ## Add private interface
+ if [ "$node_type" == "controller" ]; then
+ mac_string=config_nodes_${node}_private_mac
+ mac_addr=$(eval echo \$$mac_string)
+ if [ $mac_addr == "" ]; then
+ echo "${red} Unable to find private_mac for $node! ${reset}"
exit 1
fi
- new_node_ip=$next_private_ip
+ else
+ ##generate random mac
+ mac_addr=$(echo -n 00-60-2F; dd bs=1 count=3 if=/dev/random 2>/dev/null |hexdump -v -e '/1 "-%02X"')
+ fi
+ mac_addr=$(echo $mac_addr | sed 's/:\|-//g')
+ if [ "$node_type" == "controller" ]; then
+ new_node_ip=${controllers_ip_arr[$controller_count]}
+ if [ ! "$new_node_ip" ]; then
+ echo "{red}ERROR: Empty node ip for controller $controller_count ${reset}"
+ exit 1
fi
- sed -i 's/^.*eth_replace1.*$/ config.vm.network "private_network", virtualbox__intnet: "my_private_network", :mac => '\""$mac_addr"\"', ip: '\""$new_node_ip"\"', netmask: '\""$private_subnet_mask"\"'/' Vagrantfile
- ##replace host_ip in vm_nodes_provision with private ip
- sed -i 's/^host_ip=REPLACE/host_ip='$new_node_ip'/' vm_nodes_provision.sh
- ##replace ping site
- if [ ! -z "$ping_site" ]; then
- sed -i 's/www.google.com/'$ping_site'/' vm_nodes_provision.sh
+ ((controller_count++))
+ else
+ next_private_ip=$(next_ip $next_private_ip)
+ if [ ! "$next_private_ip" ]; then
+ echo "{red}ERROR: Could not find private ip for $node ${reset}"
+ exit 1
fi
- ##find public ip info
- mac_addr=$(echo -n 00-60-2F; dd bs=1 count=3 if=/dev/random 2>/dev/null |hexdump -v -e '/1 "-%02X"')
- mac_addr=$(echo $mac_addr | sed 's/:\|-//g')
- this_public_ip=${public_ip_arr[$node]}
+ new_node_ip=$next_private_ip
+ fi
+ sed -i 's/^.*eth_replace1.*$/ config.vm.network "private_network", virtualbox__intnet: "my_private_network", :mac => '\""$mac_addr"\"', ip: '\""$new_node_ip"\"', netmask: '\""$private_subnet_mask"\"'/' Vagrantfile
+ ##replace host_ip in vm_nodes_provision with private ip
+ sed -i 's/^host_ip=REPLACE/host_ip='$new_node_ip'/' vm_nodes_provision.sh
+ ##replace ping site
+ if [ ! -z "$ping_site" ]; then
+ sed -i 's/www.google.com/'$ping_site'/' vm_nodes_provision.sh
+ fi
- if [ -z "$enable_virtual_dhcp" ]; then
- sed -i 's/^.*eth_replace2.*$/ config.vm.network "public_network", bridge: '\'"$public_interface"\'', :mac => '\""$mac_addr"\"', ip: '\""$this_public_ip"\"', netmask: '\""$public_subnet_mask"\"'/' Vagrantfile
- else
- sed -i 's/^.*eth_replace2.*$/ config.vm.network "public_network", bridge: '\'"$public_interface"\'', :mac => '\""$mac_addr"\"'/' Vagrantfile
- fi
- remove_vagrant_network eth_replace3
- elif [ "$if_counter" == 3 ]; then
- deployment_type="three_network"
- remove_vagrant_network eth_replace3
+ ##find public ip info and add public interface
+ mac_addr=$(echo -n 00-60-2F; dd bs=1 count=3 if=/dev/random 2>/dev/null |hexdump -v -e '/1 "-%02X"')
+ mac_addr=$(echo $mac_addr | sed 's/:\|-//g')
+ this_public_ip=${public_ip_arr[$node]}
+
+ if [ -z "$enable_virtual_dhcp" ]; then
+ sed -i 's/^.*eth_replace2.*$/ config.vm.network "public_network", bridge: '\'"$public_interface"\'', :mac => '\""$mac_addr"\"', ip: '\""$this_public_ip"\"', netmask: '\""$public_subnet_mask"\"'/' Vagrantfile
else
- deployment_type="multi_network"
+ sed -i 's/^.*eth_replace2.*$/ config.vm.network "public_network", bridge: '\'"$public_interface"\'', :mac => '\""$mac_addr"\"'/' Vagrantfile
fi
+ remove_vagrant_network eth_replace3
+
##modify provisioning to do puppet install, config, and foreman check-in
##substitute host_name and dns_server in the provisioning script
host_string=config_nodes_${node}_hostname
fi
}
+##check to make sure nodes are powered off
+##this function does nothing if virtual
+##params: none
+##usage: check_baremetal_nodes()
+check_baremetal_nodes() {
+ if [ $virtual ]; then
+ echo "${blue}Skipping Baremetal node power status check as deployment is virtual ${reset}"
+ else
+ echo "${blue}Checking Baremetal nodes power state... ${reset}"
+ if [ ! -z "$base_config" ]; then
+ # Install ipmitool
+ # Major version is pinned to force some consistency for Arno
+ if ! yum list installed | grep -i ipmitool; then
+ echo "${blue}Installing ipmitool...${reset}"
+ if ! yum -y install ipmitool-1*; then
+ echo "${red}Failed to install ipmitool!${reset}"
+ exit 1
+ fi
+ fi
+
+ ###find all the bmc IPs and number of nodes
+ node_counter=0
+ output=`grep bmc_ip $base_config | grep -Eo '[0-9]+.[0-9]+.[0-9]+.[0-9]+'`
+ for line in ${output} ; do
+ bmc_ip[$node_counter]=$line
+ ((node_counter++))
+ done
+
+ max_nodes=$((node_counter-1))
+
+ ###find bmc_users per node
+ node_counter=0
+ output=`grep bmc_user $base_config | sed 's/\s*bmc_user:\s*//'`
+ for line in ${output} ; do
+ bmc_user[$node_counter]=$line
+ ((node_counter++))
+ done
+
+ ###find bmc_pass per node
+ node_counter=0
+ output=`grep bmc_pass $base_config | sed 's/\s*bmc_pass:\s*//'`
+ for line in ${output} ; do
+ bmc_pass[$node_counter]=$line
+ ((node_counter++))
+ done
+
+ for mynode in `seq 0 $max_nodes`; do
+ echo "${blue}Node: ${bmc_ip[$mynode]} ${bmc_user[$mynode]} ${bmc_pass[$mynode]} ${reset}"
+ ipmi_output=`ipmitool -I lanplus -P ${bmc_pass[$mynode]} -U ${bmc_user[$mynode]} -H ${bmc_ip[$mynode]} chassis status \
+ | grep "System Power" | cut -d ':' -f2 | tr -d [:blank:]`
+ if [ "$ipmi_output" == "on" ]; then
+ echo "${red}Error: Node is powered on: ${bmc_ip[$mynode]} ${reset}"
+ echo "${red}Please run clean.sh before running deploy! ${reset}"
+ exit 1
+ elif [ "$ipmi_output" == "off" ]; then
+ echo "${blue}Node: ${bmc_ip[$mynode]} is powered off${reset}"
+ else
+ echo "${red}Warning: Unable to detect node power state: ${bmc_ip[$mynode]} ${reset}"
+ fi
+ done
+ else
+ echo "${red}base_config was not provided for a baremetal install! Exiting${reset}"
+ exit 1
+ fi
+ fi
+}
+
##END FUNCTIONS
main() {
parse_cmdline "$@"
disable_selinux
+ check_baremetal_nodes
install_EPEL
install_vbox
install_ansible
install_vagrant
clean_tmp
verify_vm_dir
- clone_bgs
+ clone_bgs $vm_dir/foreman_vm
configure_network
configure_virtual
start_foreman
Code Review / genesis.git / commitdiff