Move Functest on Raspberry PI to md

https://wiki.opnfv.org/display/functest/Run+Functest+containers+on+Raspberry+PI

Change-Id: I7239d89237e7a06ff702ee140f8851e136eb6d87
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>

diff --git a/PI.md b/PI.md
new file mode 100644 (file)
index 0000000..1a695a1
--- /dev/null
+++ b/PI.md
@@ -0,0 +1,32 @@
+# Run Functest containers on Raspberry PI
+
+All Functest containers (Hunter and newer) are cross-compiled for arm and arm64
+via [travis-ci](https://travis-ci.org/collivier/functest/branches).
+They are built on top of Alpine armhf to support most of Raspberry PI models.
+
+All Docker manifests are published to run these containers via the same
+commands whatever the architecture.
+
+## Copy the image to the SD card
+
+> https://www.raspberrypi.org/documentation/installation/installing-images/linux.md
+>
+> This is very important, as you will lose all the data on the hard drive if you provide the wrong device name.
+> Make sure the device name is the name of the whole SD card as described above, not just a partition. For example: sdd, not sdds1 or sddp1; mmcblk0, not mmcblk0p1.
+
+
+## Install Docker
+
+```bash
+wget https://downloads.raspberrypi.org/raspbian/images/raspbian-2018-11-15/2018-11-13-raspbian-stretch.zip
+unzip 2018-11-13-raspbian-stretch.zip
+sudo dd bs=4M if=2018-11-13-raspbian-stretch.img of=/dev/mmcblk0 conv=fsync
+```
+
+## Install Docker
+
+```bash
+curl -sSL https://get.docker.com | sudo sh
+```
+
+## That's all folks