1 /* Licensed to the Apache Software Foundation (ASF) under one or more
2 * contributor license agreements. See the NOTICE file distributed with
3 * this work for additional information regarding copyright ownership.
4 * The ASF licenses this file to You under the Apache License, Version 2.0
5 * (the "License"); you may not use this file except in compliance with
6 * the License. You may obtain a copy of the License at
8 * http://www.apache.org/licenses/LICENSE-2.0
10 * Unless required by applicable law or agreed to in writing, software
11 * distributed under the License is distributed on an "AS IS" BASIS,
12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 * See the License for the specific language governing permissions and
14 * limitations under the License.
17 #include "win32/apr_arch_atime.h"
19 #include "apr_general.h"
21 #include "apr_portable.h"
30 #include "apr_arch_misc.h"
32 /* Leap year is any year divisible by four, but not by 100 unless also
35 #define IsLeapYear(y) ((!(y % 4)) ? (((!(y % 400)) && (y % 100)) ? 1 : 0) : 0)
37 static DWORD get_local_timezone(TIME_ZONE_INFORMATION **tzresult)
39 static TIME_ZONE_INFORMATION tz;
44 result = GetTimeZoneInformation(&tz);
52 static void SystemTimeToAprExpTime(apr_time_exp_t *xt, SYSTEMTIME *tm)
54 static const int dayoffset[12] =
55 {0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334};
57 /* Note; the caller is responsible for filling in detailed tm_usec,
58 * tm_gmtoff and tm_isdst data when applicable.
60 xt->tm_usec = tm->wMilliseconds * 1000;
61 xt->tm_sec = tm->wSecond;
62 xt->tm_min = tm->wMinute;
63 xt->tm_hour = tm->wHour;
64 xt->tm_mday = tm->wDay;
65 xt->tm_mon = tm->wMonth - 1;
66 xt->tm_year = tm->wYear - 1900;
67 xt->tm_wday = tm->wDayOfWeek;
68 xt->tm_yday = dayoffset[xt->tm_mon] + (tm->wDay - 1);
72 /* If this is a leap year, and we're past the 28th of Feb. (the
73 * 58th day after Jan. 1), we'll increment our tm_yday by one.
75 if (IsLeapYear(tm->wYear) && (xt->tm_yday > 58))
79 APR_DECLARE(apr_status_t) apr_time_ansi_put(apr_time_t *result,
82 *result = (apr_time_t) input * APR_USEC_PER_SEC;
86 /* Return micro-seconds since the Unix epoch (jan. 1, 1970) UTC */
87 APR_DECLARE(apr_time_t) apr_time_now(void)
92 GetSystemTimeAsFileTime(&time);
96 SystemTimeToFileTime(&st, &time);
98 FileTimeToAprTime(&aprtime, &time);
102 APR_DECLARE(apr_status_t) apr_time_exp_gmt(apr_time_exp_t *result,
107 AprTimeToFileTime(&ft, input);
108 FileTimeToSystemTime(&ft, &st);
109 /* The Platform SDK documents that SYSTEMTIME/FILETIME are
110 * generally UTC, so no timezone info needed
112 SystemTimeToAprExpTime(result, &st);
113 result->tm_usec = (apr_int32_t) (input % APR_USEC_PER_SEC);
117 APR_DECLARE(apr_status_t) apr_time_exp_tz(apr_time_exp_t *result,
123 AprTimeToFileTime(&ft, input + (offs * APR_USEC_PER_SEC));
124 FileTimeToSystemTime(&ft, &st);
125 /* The Platform SDK documents that SYSTEMTIME/FILETIME are
126 * generally UTC, so we will simply note the offs used.
128 SystemTimeToAprExpTime(result, &st);
129 result->tm_usec = (apr_int32_t) (input % APR_USEC_PER_SEC);
130 result->tm_gmtoff = offs;
134 APR_DECLARE(apr_status_t) apr_time_exp_lt(apr_time_exp_t *result,
138 FILETIME ft, localft;
140 AprTimeToFileTime(&ft, input);
142 #if APR_HAS_UNICODE_FS && !defined(_WIN32_WCE)
145 TIME_ZONE_INFORMATION *tz;
147 apr_time_t localtime;
149 get_local_timezone(&tz);
151 FileTimeToSystemTime(&ft, &st);
153 /* The Platform SDK documents that SYSTEMTIME/FILETIME are
154 * generally UTC. We use SystemTimeToTzSpecificLocalTime
155 * because FileTimeToLocalFileFime is documented that the
156 * resulting time local file time would have DST relative
157 * to the *present* date, not the date converted.
159 SystemTimeToTzSpecificLocalTime(tz, &st, &localst);
160 SystemTimeToAprExpTime(result, &localst);
161 result->tm_usec = (apr_int32_t) (input % APR_USEC_PER_SEC);
164 /* Recover the resulting time as an apr time and use the
165 * delta for gmtoff in seconds (and ignore msec rounding)
167 SystemTimeToFileTime(&localst, &localft);
168 FileTimeToAprTime(&localtime, &localft);
169 result->tm_gmtoff = (int)apr_time_sec(localtime)
170 - (int)apr_time_sec(input);
172 /* To compute the dst flag, we compare the expected
173 * local (standard) timezone bias to the delta.
174 * [Note, in war time or double daylight time the
175 * resulting tm_isdst is, desireably, 2 hours]
177 result->tm_isdst = (result->tm_gmtoff / 3600)
178 - (-(tz->Bias + tz->StandardBias) / 60);
181 #if APR_HAS_ANSI_FS || defined(_WIN32_WCE)
184 TIME_ZONE_INFORMATION tz;
185 /* XXX: This code is simply *wrong*. The time converted will always
186 * map to the *now current* status of daylight savings time.
189 FileTimeToLocalFileTime(&ft, &localft);
190 FileTimeToSystemTime(&localft, &st);
191 SystemTimeToAprExpTime(result, &st);
192 result->tm_usec = (apr_int32_t) (input % APR_USEC_PER_SEC);
194 switch (GetTimeZoneInformation(&tz)) {
195 case TIME_ZONE_ID_UNKNOWN:
196 result->tm_isdst = 0;
197 /* Bias = UTC - local time in minutes
198 * tm_gmtoff is seconds east of UTC
200 result->tm_gmtoff = tz.Bias * -60;
202 case TIME_ZONE_ID_STANDARD:
203 result->tm_isdst = 0;
204 result->tm_gmtoff = (tz.Bias + tz.StandardBias) * -60;
206 case TIME_ZONE_ID_DAYLIGHT:
207 result->tm_isdst = 1;
208 result->tm_gmtoff = (tz.Bias + tz.DaylightBias) * -60;
219 APR_DECLARE(apr_status_t) apr_time_exp_get(apr_time_t *t,
222 apr_time_t year = xt->tm_year;
224 static const int dayoffset[12] =
225 {306, 337, 0, 31, 61, 92, 122, 153, 184, 214, 245, 275};
227 /* shift new year to 1st March in order to make leap year calc easy */
232 /* Find number of days since 1st March 1900 (in the Gregorian calendar). */
234 days = year * 365 + year / 4 - year / 100 + (year / 100 + 3) / 4;
235 days += dayoffset[xt->tm_mon] + xt->tm_mday - 1;
236 days -= 25508; /* 1 jan 1970 is 25508 days since 1 mar 1900 */
238 days = ((days * 24 + xt->tm_hour) * 60 + xt->tm_min) * 60 + xt->tm_sec;
243 *t = days * APR_USEC_PER_SEC + xt->tm_usec;
247 APR_DECLARE(apr_status_t) apr_time_exp_gmt_get(apr_time_t *t,
250 apr_status_t status = apr_time_exp_get(t, xt);
251 if (status == APR_SUCCESS)
252 *t -= (apr_time_t) xt->tm_gmtoff * APR_USEC_PER_SEC;
256 APR_DECLARE(apr_status_t) apr_os_imp_time_get(apr_os_imp_time_t **ostime,
259 /* TODO: Consider not passing in pointer to apr_time_t (e.g., call by value) */
260 AprTimeToFileTime(*ostime, *aprtime);
264 APR_DECLARE(apr_status_t) apr_os_exp_time_get(apr_os_exp_time_t **ostime,
265 apr_time_exp_t *aprexptime)
267 (*ostime)->wYear = aprexptime->tm_year + 1900;
268 (*ostime)->wMonth = aprexptime->tm_mon + 1;
269 (*ostime)->wDayOfWeek = aprexptime->tm_wday;
270 (*ostime)->wDay = aprexptime->tm_mday;
271 (*ostime)->wHour = aprexptime->tm_hour;
272 (*ostime)->wMinute = aprexptime->tm_min;
273 (*ostime)->wSecond = aprexptime->tm_sec;
274 (*ostime)->wMilliseconds = aprexptime->tm_usec / 1000;
278 APR_DECLARE(apr_status_t) apr_os_imp_time_put(apr_time_t *aprtime,
279 apr_os_imp_time_t **ostime,
282 /* XXX: sanity failure, what is file time, gmt or local ?
284 FileTimeToAprTime(aprtime, *ostime);
288 APR_DECLARE(apr_status_t) apr_os_exp_time_put(apr_time_exp_t *aprtime,
289 apr_os_exp_time_t **ostime,
292 /* The Platform SDK documents that SYSTEMTIME/FILETIME are
293 * generally UTC, so no timezone info needed
295 SystemTimeToAprExpTime(aprtime, *ostime);
299 APR_DECLARE(void) apr_sleep(apr_interval_time_t t)
301 /* One of the few sane situations for a cast, Sleep
302 * is in ms, not us, and passed as a DWORD value
304 Sleep((DWORD)(t / 1000));
307 #if defined(_WIN32_WCE)
308 /* A noop on WinCE, like Unix implementation */
309 APR_DECLARE(void) apr_time_clock_hires(apr_pool_t *p)
314 static apr_status_t clock_restore(void *unsetres)
317 SetTimerResolution((ULONG)unsetres, FALSE, &newRes);
321 APR_DECLARE(void) apr_time_clock_hires(apr_pool_t *p)
324 /* Timer resolution is stated in 100ns units. Note that TRUE requests the
325 * new clock resolution, FALSE above releases the request.
327 if (SetTimerResolution(10000, TRUE, &newRes) == 0 /* STATUS_SUCCESS */) {
328 /* register the cleanup... */
329 apr_pool_cleanup_register(p, (void*)10000, clock_restore,
330 apr_pool_cleanup_null);
337 APR_DECLARE(apr_status_t) apr_explode_time(apr_time_exp_t *result,
341 return apr_time_exp_tz(result, input, offs);
345 APR_DECLARE(apr_status_t) apr_explode_localtime(apr_time_exp_t *result,
348 return apr_time_exp_lt(result, input);
352 APR_DECLARE(apr_status_t) apr_implode_gmt(apr_time_t *t,
355 return apr_time_exp_gmt_get(t, xt);