+# set 'true' to enable custom ddp package to be loaded after reboot
+enable_ice_systemd_service: false
+# Enabling this feature will install QAT drivers + services
+update_qat_drivers: {{ bmra.features.qat.update_drivers }}
+
+# qat interface configuration list
+{% if bmra.device_roles.qat is defined %}
+qat_devices:
+{% for dev in bmra.device_roles.qat %}
+ - qat_dev: {{ dev.name }}
+ qat_id: "{{ dev.pci }}"
+ qat_module_type: {{ dev.mod_type }}
+ qat_pci_type: {{ dev.pci_type }}
+ qat_sriov_numvfs: {{ dev.vfs }}
+{% endfor %}
+{% else %}
+qat_devices: []
+{% endif %}
+# - qat_dev: crypto01 # Device name as separate QAT Symmetric Crypto devices on which qat_sriov_numvfs will be distributed
+# qat_id: "0000:ab:00.0" # Device QAT id one using DPDK compatible driver for VF devices to be used by vfio-pci kernel driver, replace as required
+# qat_module_type: qat_c62x # QAT Crypto Poll Mode Kernel Module supported are qat_dh895xcc,qat_c62x,qat_c3xxx,qat_200xx,qat_c4xxx,qat_d15xx
+# qat_pci_type: c6xx # QAT Crypto Poll Mode Pci Driver id supported are dh895xcc,c6xx,c3xxx,d15xx,200xx & c4xxx
+# qat_sriov_numvfs: 12 # set how many VFs per qat_id to be created such as c6xxvf support 32 so per device will be 10+10+12=32, replace as required
+ # Note: If don't want to assign VFs to id leave it as 0 such as qat_sriov_numvfs: 0
+# - qat_dev: crypto02
+# qat_id: "0000:xy:00.0"
+# qat_module_type: qat_c62x
+# qat_pci_type: c6xx
+# qat_sriov_numvfs: 10
+
+# - qat_dev: crypto03
+# qat_id: "0000:yz:00.0"
+# qat_module_type: qat_c62x
+# qat_pci_type: c6xx
+# qat_sriov_numvfs: 10