--- /dev/null
+// -*- mode:C++; tab-width:8; c-basic-offset:2; indent-tabs-mode:t -*-
+// vim: ts=8 sw=2 smarttab
+/*
+ * Ceph - scalable distributed file system
+ *
+ * Copyright (C) 2004-2012 Sage Weil <sage@newdream.net>
+ *
+ * This is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License version 2.1, as published by the Free Software
+ * Foundation. See file COPYING.
+ *
+ */
+
+#ifndef CEPH_LIBRADOS_H
+#define CEPH_LIBRADOS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <netinet/in.h>
+#if defined(__linux__)
+#include <linux/types.h>
+#elif defined(__FreeBSD__)
+#include <sys/types.h>
+#endif
+#include <unistd.h>
+#include <string.h>
+#include "rados_types.h"
+
+#include <sys/time.h>
+
+#ifndef CEPH_OSD_TMAP_SET
+/* These are also defined in rados.h and objclass.h. Keep them in sync! */
+#define CEPH_OSD_TMAP_HDR 'h'
+#define CEPH_OSD_TMAP_SET 's'
+#define CEPH_OSD_TMAP_CREATE 'c'
+#define CEPH_OSD_TMAP_RM 'r'
+#endif
+
+#define LIBRADOS_VER_MAJOR 0
+#define LIBRADOS_VER_MINOR 69
+#define LIBRADOS_VER_EXTRA 1
+
+#define LIBRADOS_VERSION(maj, min, extra) ((maj << 16) + (min << 8) + extra)
+
+#define LIBRADOS_VERSION_CODE LIBRADOS_VERSION(LIBRADOS_VER_MAJOR, LIBRADOS_VER_MINOR, LIBRADOS_VER_EXTRA)
+
+#define LIBRADOS_SUPPORTS_WATCH 1
+#define LIBRADOS_SUPPORTS_SERVICES 1
+
+/* RADOS lock flags
+ * They are also defined in cls_lock_types.h. Keep them in sync!
+ */
+#define LIBRADOS_LOCK_FLAG_RENEW 0x1
+
+/*
+ * Constants for rados_write_op_create().
+ */
+#define LIBRADOS_CREATE_EXCLUSIVE 1
+#define LIBRADOS_CREATE_IDEMPOTENT 0
+
+/*
+ * Flags that can be set on a per-op basis via
+ * rados_read_op_set_flags() and rados_write_op_set_flags().
+ */
+enum {
+ // fail a create operation if the object already exists
+ LIBRADOS_OP_FLAG_EXCL = 0x1,
+ // allow the transaction to succeed even if the flagged op fails
+ LIBRADOS_OP_FLAG_FAILOK = 0x2,
+ // indicate read/write op random
+ LIBRADOS_OP_FLAG_FADVISE_RANDOM = 0x4,
+ // indicate read/write op sequential
+ LIBRADOS_OP_FLAG_FADVISE_SEQUENTIAL = 0x8,
+ // indicate read/write data will be accessed in the near future (by someone)
+ LIBRADOS_OP_FLAG_FADVISE_WILLNEED = 0x10,
+ // indicate read/write data will not accessed in the near future (by anyone)
+ LIBRADOS_OP_FLAG_FADVISE_DONTNEED = 0x20,
+ // indicate read/write data will not accessed again (by *this* client)
+ LIBRADOS_OP_FLAG_FADVISE_NOCACHE = 0x40,
+};
+
+#if __GNUC__ >= 4
+ #define CEPH_RADOS_API __attribute__ ((visibility ("default")))
+#else
+ #define CEPH_RADOS_API
+#endif
+
+/**
+ * @name xattr comparison operations
+ * Operators for comparing xattrs on objects, and aborting the
+ * rados_read_op or rados_write_op transaction if the comparison
+ * fails.
+ *
+ * @{
+ */
+enum {
+ LIBRADOS_CMPXATTR_OP_EQ = 1,
+ LIBRADOS_CMPXATTR_OP_NE = 2,
+ LIBRADOS_CMPXATTR_OP_GT = 3,
+ LIBRADOS_CMPXATTR_OP_GTE = 4,
+ LIBRADOS_CMPXATTR_OP_LT = 5,
+ LIBRADOS_CMPXATTR_OP_LTE = 6
+};
+/** @} */
+
+/**
+ * @name Operation Flags
+ * Flags for rados_read_op_opeprate(), rados_write_op_operate(),
+ * rados_aio_read_op_operate(), and rados_aio_write_op_operate().
+ * See librados.hpp for details.
+ * @{
+ */
+enum {
+ LIBRADOS_OPERATION_NOFLAG = 0,
+ LIBRADOS_OPERATION_BALANCE_READS = 1,
+ LIBRADOS_OPERATION_LOCALIZE_READS = 2,
+ LIBRADOS_OPERATION_ORDER_READS_WRITES = 4,
+ LIBRADOS_OPERATION_IGNORE_CACHE = 8,
+ LIBRADOS_OPERATION_SKIPRWLOCKS = 16,
+ LIBRADOS_OPERATION_IGNORE_OVERLAY = 32,
+ /* send requests to cluster despite the cluster or pool being marked
+ full; ops will either succeed (e.g., delete) or return EDQUOT or
+ ENOSPC. */
+ LIBRADOS_OPERATION_FULL_TRY = 64,
+ /*
+ * Mainly for delete op
+ */
+ LIBRADOS_OPERATION_FULL_FORCE = 128,
+ LIBRADOS_OPERATION_IGNORE_REDIRECT = 256,
+};
+/** @} */
+
+/**
+ * @name Alloc hint flags
+ * Flags for rados_write_op_alloc_hint2() and rados_set_alloc_hint2()
+ * indicating future IO patterns.
+ * @{
+ */
+enum {
+ LIBRADOS_ALLOC_HINT_FLAG_SEQUENTIAL_WRITE = 1,
+ LIBRADOS_ALLOC_HINT_FLAG_RANDOM_WRITE = 2,
+ LIBRADOS_ALLOC_HINT_FLAG_SEQUENTIAL_READ = 4,
+ LIBRADOS_ALLOC_HINT_FLAG_RANDOM_READ = 8,
+ LIBRADOS_ALLOC_HINT_FLAG_APPEND_ONLY = 16,
+ LIBRADOS_ALLOC_HINT_FLAG_IMMUTABLE = 32,
+ LIBRADOS_ALLOC_HINT_FLAG_SHORTLIVED = 64,
+ LIBRADOS_ALLOC_HINT_FLAG_LONGLIVED = 128,
+ LIBRADOS_ALLOC_HINT_FLAG_COMPRESSIBLE = 256,
+ LIBRADOS_ALLOC_HINT_FLAG_INCOMPRESSIBLE = 512,
+};
+/** @} */
+
+typedef enum {
+ LIBRADOS_CHECKSUM_TYPE_XXHASH32 = 0,
+ LIBRADOS_CHECKSUM_TYPE_XXHASH64 = 1,
+ LIBRADOS_CHECKSUM_TYPE_CRC32C = 2
+} rados_checksum_type_t;
+
+/*
+ * snap id contants
+ */
+#define LIBRADOS_SNAP_HEAD ((uint64_t)(-2))
+#define LIBRADOS_SNAP_DIR ((uint64_t)(-1))
+
+/**
+ * @typedef rados_t
+ *
+ * A handle for interacting with a RADOS cluster. It encapsulates all
+ * RADOS client configuration, including username, key for
+ * authentication, logging, and debugging. Talking different clusters
+ * -- or to the same cluster with different users -- requires
+ * different cluster handles.
+ */
+#ifndef VOIDPTR_RADOS_T
+#define VOIDPTR_RADOS_T
+typedef void *rados_t;
+#endif //VOIDPTR_RADOS_T
+
+/**
+ * @typedef rados_config_t
+ *
+ * A handle for the ceph configuration context for the rados_t cluster
+ * instance. This can be used to share configuration context/state
+ * (e.g., logging configuration) between librados instance.
+ *
+ * @warning The config context does not have independent reference
+ * counting. As such, a rados_config_t handle retrieved from a given
+ * rados_t is only valid as long as that rados_t.
+ */
+typedef void *rados_config_t;
+
+/**
+ * @typedef rados_ioctx_t
+ *
+ * An io context encapsulates a few settings for all I/O operations
+ * done on it:
+ * - pool - set when the io context is created (see rados_ioctx_create())
+ * - snapshot context for writes (see
+ * rados_ioctx_selfmanaged_snap_set_write_ctx())
+ * - snapshot id to read from (see rados_ioctx_snap_set_read())
+ * - object locator for all single-object operations (see
+ * rados_ioctx_locator_set_key())
+ * - namespace for all single-object operations (see
+ * rados_ioctx_set_namespace()). Set to LIBRADOS_ALL_NSPACES
+ * before rados_nobjects_list_open() will list all objects in all
+ * namespaces.
+ *
+ * @warning Changing any of these settings is not thread-safe -
+ * librados users must synchronize any of these changes on their own,
+ * or use separate io contexts for each thread
+ */
+typedef void *rados_ioctx_t;
+
+/**
+ * @typedef rados_list_ctx_t
+ *
+ * An iterator for listing the objects in a pool.
+ * Used with rados_nobjects_list_open(),
+ * rados_nobjects_list_next(), and
+ * rados_nobjects_list_close().
+ */
+typedef void *rados_list_ctx_t;
+
+/**
+ * @typedef rados_object_list_cursor
+ *
+ * The cursor used with rados_enumerate_objects
+ * and accompanying methods.
+ */
+typedef void * rados_object_list_cursor;
+
+typedef struct rados_object_list_item {
+ size_t oid_length;
+ char *oid;
+
+ size_t nspace_length;
+ char *nspace;
+
+ size_t locator_length;
+ char *locator;
+} rados_object_list_item;
+
+/**
+ * @typedef rados_snap_t
+ * The id of a snapshot.
+ */
+typedef uint64_t rados_snap_t;
+
+/**
+ * @typedef rados_xattrs_iter_t
+ * An iterator for listing extended attrbutes on an object.
+ * Used with rados_getxattrs(), rados_getxattrs_next(), and
+ * rados_getxattrs_end().
+ */
+typedef void *rados_xattrs_iter_t;
+
+/**
+ * @typedef rados_omap_iter_t
+ * An iterator for listing omap key/value pairs on an object.
+ * Used with rados_read_op_omap_get_keys(), rados_read_op_omap_get_vals(),
+ * rados_read_op_omap_get_vals_by_keys(), rados_omap_get_next(), and
+ * rados_omap_get_end().
+ */
+typedef void *rados_omap_iter_t;
+
+/**
+ * @struct rados_pool_stat_t
+ * Usage information for a pool.
+ */
+struct rados_pool_stat_t {
+ /// space used in bytes
+ uint64_t num_bytes;
+ /// space used in KB
+ uint64_t num_kb;
+ /// number of objects in the pool
+ uint64_t num_objects;
+ /// number of clones of objects
+ uint64_t num_object_clones;
+ /// num_objects * num_replicas
+ uint64_t num_object_copies;
+ uint64_t num_objects_missing_on_primary;
+ /// number of objects found on no OSDs
+ uint64_t num_objects_unfound;
+ /// number of objects replicated fewer times than they should be
+ /// (but found on at least one OSD)
+ uint64_t num_objects_degraded;
+ uint64_t num_rd;
+ uint64_t num_rd_kb;
+ uint64_t num_wr;
+ uint64_t num_wr_kb;
+};
+
+/**
+ * @struct rados_cluster_stat_t
+ * Cluster-wide usage information
+ */
+struct rados_cluster_stat_t {
+ uint64_t kb, kb_used, kb_avail;
+ uint64_t num_objects;
+};
+
+/**
+ * @typedef rados_write_op_t
+ *
+ * An object write operation stores a number of operations which can be
+ * executed atomically. For usage, see:
+ * - Creation and deletion: rados_create_write_op() rados_release_write_op()
+ * - Extended attribute manipulation: rados_write_op_cmpxattr()
+ * rados_write_op_cmpxattr(), rados_write_op_setxattr(),
+ * rados_write_op_rmxattr()
+ * - Object map key/value pairs: rados_write_op_omap_set(),
+ * rados_write_op_omap_rm_keys(), rados_write_op_omap_clear(),
+ * rados_write_op_omap_cmp()
+ * - Object properties: rados_write_op_assert_exists(),
+ * rados_write_op_assert_version()
+ * - Creating objects: rados_write_op_create()
+ * - IO on objects: rados_write_op_append(), rados_write_op_write(), rados_write_op_zero
+ * rados_write_op_write_full(), rados_write_op_writesame(), rados_write_op_remove,
+ * rados_write_op_truncate(), rados_write_op_zero(), rados_write_op_cmpext()
+ * - Hints: rados_write_op_set_alloc_hint()
+ * - Performing the operation: rados_write_op_operate(), rados_aio_write_op_operate()
+ */
+typedef void *rados_write_op_t;
+
+/**
+ * @typedef rados_read_op_t
+ *
+ * An object read operation stores a number of operations which can be
+ * executed atomically. For usage, see:
+ * - Creation and deletion: rados_create_read_op() rados_release_read_op()
+ * - Extended attribute manipulation: rados_read_op_cmpxattr(),
+ * rados_read_op_getxattr(), rados_read_op_getxattrs()
+ * - Object map key/value pairs: rados_read_op_omap_get_vals(),
+ * rados_read_op_omap_get_keys(), rados_read_op_omap_get_vals_by_keys(),
+ * rados_read_op_omap_cmp()
+ * - Object properties: rados_read_op_stat(), rados_read_op_assert_exists(),
+ * rados_read_op_assert_version()
+ * - IO on objects: rados_read_op_read(), rados_read_op_checksum(),
+ * rados_read_op_cmpext()
+ * - Custom operations: rados_read_op_exec(), rados_read_op_exec_user_buf()
+ * - Request properties: rados_read_op_set_flags()
+ * - Performing the operation: rados_read_op_operate(),
+ * rados_aio_read_op_operate()
+ */
+typedef void *rados_read_op_t;
+
+/**
+ * @typedef rados_completion_t
+ * Represents the state of an asynchronous operation - it contains the
+ * return value once the operation completes, and can be used to block
+ * until the operation is complete or safe.
+ */
+typedef void *rados_completion_t;
+
+/**
+ * @struct blkin_trace_info
+ * blkin trace information for Zipkin tracing
+ */
+struct blkin_trace_info;
+
+/**
+ * Get the version of librados.
+ *
+ * The version number is major.minor.extra. Note that this is
+ * unrelated to the Ceph version number.
+ *
+ * TODO: define version semantics, i.e.:
+ * - incrementing major is for backwards-incompatible changes
+ * - incrementing minor is for backwards-compatible changes
+ * - incrementing extra is for bug fixes
+ *
+ * @param major where to store the major version number
+ * @param minor where to store the minor version number
+ * @param extra where to store the extra version number
+ */
+CEPH_RADOS_API void rados_version(int *major, int *minor, int *extra);
+
+/**
+ * @name Setup and Teardown
+ * These are the first and last functions to that should be called
+ * when using librados.
+ *
+ * @{
+ */
+
+/**
+ * Create a handle for communicating with a RADOS cluster.
+ *
+ * Ceph environment variables are read when this is called, so if
+ * $CEPH_ARGS specifies everything you need to connect, no further
+ * configuration is necessary.
+ *
+ * @param cluster where to store the handle
+ * @param id the user to connect as (i.e. admin, not client.admin)
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_create(rados_t *cluster, const char * const id);
+
+/**
+ * Extended version of rados_create.
+ *
+ * Like rados_create, but
+ * 1) don't assume 'client\.'+id; allow full specification of name
+ * 2) allow specification of cluster name
+ * 3) flags for future expansion
+ */
+CEPH_RADOS_API int rados_create2(rados_t *pcluster,
+ const char *const clustername,
+ const char * const name, uint64_t flags);
+
+/**
+ * Initialize a cluster handle from an existing configuration.
+ *
+ * Share configuration state with another rados_t instance.
+ *
+ * @param cluster where to store the handle
+ * @param cct the existing configuration to use
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_create_with_context(rados_t *cluster,
+ rados_config_t cct);
+
+/**
+ * Ping the monitor with ID mon_id, storing the resulting reply in
+ * buf (if specified) with a maximum size of len.
+ *
+ * The result buffer is allocated on the heap; the caller is
+ * expected to release that memory with rados_buffer_free(). The
+ * buffer and length pointers can be NULL, in which case they are
+ * not filled in.
+ *
+ * @param cluster cluster handle
+ * @param[in] mon_id ID of the monitor to ping
+ * @param[out] outstr double pointer with the resulting reply
+ * @param[out] outstrlen pointer with the size of the reply in outstr
+ */
+CEPH_RADOS_API int rados_ping_monitor(rados_t cluster, const char *mon_id,
+ char **outstr, size_t *outstrlen);
+
+/**
+ * Connect to the cluster.
+ *
+ * @note BUG: Before calling this, calling a function that communicates with the
+ * cluster will crash.
+ *
+ * @pre The cluster handle is configured with at least a monitor
+ * address. If cephx is enabled, a client name and secret must also be
+ * set.
+ *
+ * @post If this succeeds, any function in librados may be used
+ *
+ * @param cluster The cluster to connect to.
+ * @returns 0 on sucess, negative error code on failure
+ */
+CEPH_RADOS_API int rados_connect(rados_t cluster);
+
+/**
+ * Disconnects from the cluster.
+ *
+ * For clean up, this is only necessary after rados_connect() has
+ * succeeded.
+ *
+ * @warning This does not guarantee any asynchronous writes have
+ * completed. To do that, you must call rados_aio_flush() on all open
+ * io contexts.
+ *
+ * @warning We implicitly call rados_watch_flush() on shutdown. If
+ * there are watches being used, this should be done explicitly before
+ * destroying the relevant IoCtx. We do it here as a safety measure.
+ *
+ * @post the cluster handle cannot be used again
+ *
+ * @param cluster the cluster to shutdown
+ */
+CEPH_RADOS_API void rados_shutdown(rados_t cluster);
+
+/** @} init */
+
+/**
+ * @name Configuration
+ * These functions read and update Ceph configuration for a cluster
+ * handle. Any configuration changes must be done before connecting to
+ * the cluster.
+ *
+ * Options that librados users might want to set include:
+ * - mon_host
+ * - auth_supported
+ * - key, keyfile, or keyring when using cephx
+ * - log_file, log_to_stderr, err_to_stderr, and log_to_syslog
+ * - debug_rados, debug_objecter, debug_monc, debug_auth, or debug_ms
+ *
+ * See docs.ceph.com for information about available configuration options`
+ *
+ * @{
+ */
+
+/**
+ * Configure the cluster handle using a Ceph config file
+ *
+ * If path is NULL, the default locations are searched, and the first
+ * found is used. The locations are:
+ * - $CEPH_CONF (environment variable)
+ * - /etc/ceph/ceph.conf
+ * - ~/.ceph/config
+ * - ceph.conf (in the current working directory)
+ *
+ * @pre rados_connect() has not been called on the cluster handle
+ *
+ * @param cluster cluster handle to configure
+ * @param path path to a Ceph configuration file
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_conf_read_file(rados_t cluster, const char *path);
+
+/**
+ * Configure the cluster handle with command line arguments
+ *
+ * argv can contain any common Ceph command line option, including any
+ * configuration parameter prefixed by '--' and replacing spaces with
+ * dashes or underscores. For example, the following options are equivalent:
+ * - --mon-host 10.0.0.1:6789
+ * - --mon_host 10.0.0.1:6789
+ * - -m 10.0.0.1:6789
+ *
+ * @pre rados_connect() has not been called on the cluster handle
+ *
+ * @param cluster cluster handle to configure
+ * @param argc number of arguments in argv
+ * @param argv arguments to parse
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_conf_parse_argv(rados_t cluster, int argc,
+ const char **argv);
+
+
+/**
+ * Configure the cluster handle with command line arguments, returning
+ * any remainders. Same rados_conf_parse_argv, except for extra
+ * remargv argument to hold returns unrecognized arguments.
+ *
+ * @pre rados_connect() has not been called on the cluster handle
+ *
+ * @param cluster cluster handle to configure
+ * @param argc number of arguments in argv
+ * @param argv arguments to parse
+ * @param remargv char* array for returned unrecognized arguments
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_conf_parse_argv_remainder(rados_t cluster, int argc,
+ const char **argv,
+ const char **remargv);
+/**
+ * Configure the cluster handle based on an environment variable
+ *
+ * The contents of the environment variable are parsed as if they were
+ * Ceph command line options. If var is NULL, the CEPH_ARGS
+ * environment variable is used.
+ *
+ * @pre rados_connect() has not been called on the cluster handle
+ *
+ * @note BUG: this is not threadsafe - it uses a static buffer
+ *
+ * @param cluster cluster handle to configure
+ * @param var name of the environment variable to read
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_conf_parse_env(rados_t cluster, const char *var);
+
+/**
+ * Set a configuration option
+ *
+ * @pre rados_connect() has not been called on the cluster handle
+ *
+ * @param cluster cluster handle to configure
+ * @param option option to set
+ * @param value value of the option
+ * @returns 0 on success, negative error code on failure
+ * @returns -ENOENT when the option is not a Ceph configuration option
+ */
+CEPH_RADOS_API int rados_conf_set(rados_t cluster, const char *option,
+ const char *value);
+
+/**
+ * Get the value of a configuration option
+ *
+ * @param cluster configuration to read
+ * @param option which option to read
+ * @param buf where to write the configuration value
+ * @param len the size of buf in bytes
+ * @returns 0 on success, negative error code on failure
+ * @returns -ENAMETOOLONG if the buffer is too short to contain the
+ * requested value
+ */
+CEPH_RADOS_API int rados_conf_get(rados_t cluster, const char *option,
+ char *buf, size_t len);
+
+/** @} config */
+
+/**
+ * Read usage info about the cluster
+ *
+ * This tells you total space, space used, space available, and number
+ * of objects. These are not updated immediately when data is written,
+ * they are eventually consistent.
+ *
+ * @param cluster cluster to query
+ * @param result where to store the results
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_cluster_stat(rados_t cluster,
+ struct rados_cluster_stat_t *result);
+
+/**
+ * Get the fsid of the cluster as a hexadecimal string.
+ *
+ * The fsid is a unique id of an entire Ceph cluster.
+ *
+ * @param cluster where to get the fsid
+ * @param buf where to write the fsid
+ * @param len the size of buf in bytes (should be 37)
+ * @returns 0 on success, negative error code on failure
+ * @returns -ERANGE if the buffer is too short to contain the
+ * fsid
+ */
+CEPH_RADOS_API int rados_cluster_fsid(rados_t cluster, char *buf, size_t len);
+
+/**
+ * Get/wait for the most recent osdmap
+ *
+ * @param cluster the cluster to shutdown
+ * @returns 0 on sucess, negative error code on failure
+ */
+CEPH_RADOS_API int rados_wait_for_latest_osdmap(rados_t cluster);
+
+/**
+ * @name Pools
+ *
+ * RADOS pools are separate namespaces for objects. Pools may have
+ * different crush rules associated with them, so they could have
+ * differing replication levels or placement strategies. RADOS
+ * permissions are also tied to pools - users can have different read,
+ * write, and execute permissions on a per-pool basis.
+ *
+ * @{
+ */
+
+/**
+ * List pools
+ *
+ * Gets a list of pool names as NULL-terminated strings. The pool
+ * names will be placed in the supplied buffer one after another.
+ * After the last pool name, there will be two 0 bytes in a row.
+ *
+ * If len is too short to fit all the pool name entries we need, we will fill
+ * as much as we can.
+ *
+ * Buf may be null to determine the buffer size needed to list all pools.
+ *
+ * @param cluster cluster handle
+ * @param buf output buffer
+ * @param len output buffer length
+ * @returns length of the buffer we would need to list all pools
+ */
+CEPH_RADOS_API int rados_pool_list(rados_t cluster, char *buf, size_t len);
+
+/**
+ * List inconsistent placement groups of the given pool
+ *
+ * Gets a list of inconsistent placement groups as NULL-terminated strings.
+ * The placement group names will be placed in the supplied buffer one after
+ * another. After the last name, there will be two 0 types in a row.
+ *
+ * If len is too short to fit all the placement group entries we need, we will
+ * fill as much as we can.
+ *
+ * @param cluster cluster handle
+ * @param pool pool ID
+ * @param buf output buffer
+ * @param len output buffer length
+ * @returns length of the buffer we would need to list all pools
+ */
+CEPH_RADOS_API int rados_inconsistent_pg_list(rados_t cluster, int64_t pool,
+ char *buf, size_t len);
+
+/**
+ * Get a configuration handle for a rados cluster handle
+ *
+ * This handle is valid only as long as the cluster handle is valid.
+ *
+ * @param cluster cluster handle
+ * @returns config handle for this cluster
+ */
+CEPH_RADOS_API rados_config_t rados_cct(rados_t cluster);
+
+/**
+ * Get a global id for current instance
+ *
+ * This id is a unique representation of current connection to the cluster
+ *
+ * @param cluster cluster handle
+ * @returns instance global id
+ */
+CEPH_RADOS_API uint64_t rados_get_instance_id(rados_t cluster);
+
+/**
+ * Create an io context
+ *
+ * The io context allows you to perform operations within a particular
+ * pool. For more details see rados_ioctx_t.
+ *
+ * @param cluster which cluster the pool is in
+ * @param pool_name name of the pool
+ * @param ioctx where to store the io context
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_ioctx_create(rados_t cluster, const char *pool_name,
+ rados_ioctx_t *ioctx);
+CEPH_RADOS_API int rados_ioctx_create2(rados_t cluster, int64_t pool_id,
+ rados_ioctx_t *ioctx);
+
+/**
+ * The opposite of rados_ioctx_create
+ *
+ * This just tells librados that you no longer need to use the io context.
+ * It may not be freed immediately if there are pending asynchronous
+ * requests on it, but you should not use an io context again after
+ * calling this function on it.
+ *
+ * @warning This does not guarantee any asynchronous
+ * writes have completed. You must call rados_aio_flush()
+ * on the io context before destroying it to do that.
+ *
+ * @warning If this ioctx is used by rados_watch, the caller needs to
+ * be sure that all registered watches are disconnected via
+ * rados_unwatch() and that rados_watch_flush() is called. This
+ * ensures that a racing watch callback does not make use of a
+ * destroyed ioctx.
+ *
+ * @param io the io context to dispose of
+ */
+CEPH_RADOS_API void rados_ioctx_destroy(rados_ioctx_t io);
+
+/**
+ * Get configuration handle for a pool handle
+ *
+ * @param io pool handle
+ * @returns rados_config_t for this cluster
+ */
+CEPH_RADOS_API rados_config_t rados_ioctx_cct(rados_ioctx_t io);
+
+/**
+ * Get the cluster handle used by this rados_ioctx_t
+ * Note that this is a weak reference, and should not
+ * be destroyed via rados_shutdown().
+ *
+ * @param io the io context
+ * @returns the cluster handle for this io context
+ */
+CEPH_RADOS_API rados_t rados_ioctx_get_cluster(rados_ioctx_t io);
+
+/**
+ * Get pool usage statistics
+ *
+ * Fills in a rados_pool_stat_t after querying the cluster.
+ *
+ * @param io determines which pool to query
+ * @param stats where to store the results
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_ioctx_pool_stat(rados_ioctx_t io,
+ struct rados_pool_stat_t *stats);
+
+/**
+ * Get the id of a pool
+ *
+ * @param cluster which cluster the pool is in
+ * @param pool_name which pool to look up
+ * @returns id of the pool
+ * @returns -ENOENT if the pool is not found
+ */
+CEPH_RADOS_API int64_t rados_pool_lookup(rados_t cluster,
+ const char *pool_name);
+
+/**
+ * Get the name of a pool
+ *
+ * @param cluster which cluster the pool is in
+ * @param id the id of the pool
+ * @param buf where to store the pool name
+ * @param maxlen size of buffer where name will be stored
+ * @returns length of string stored, or -ERANGE if buffer too small
+ */
+CEPH_RADOS_API int rados_pool_reverse_lookup(rados_t cluster, int64_t id,
+ char *buf, size_t maxlen);
+
+/**
+ * Create a pool with default settings
+ *
+ * The default owner is the admin user (auid 0).
+ * The default crush rule is rule 0.
+ *
+ * @param cluster the cluster in which the pool will be created
+ * @param pool_name the name of the new pool
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_pool_create(rados_t cluster, const char *pool_name);
+
+/**
+ * Create a pool owned by a specific auid
+ *
+ * The auid is the authenticated user id to give ownership of the pool.
+ * TODO: document auid and the rest of the auth system
+ *
+ * @param cluster the cluster in which the pool will be created
+ * @param pool_name the name of the new pool
+ * @param auid the id of the owner of the new pool
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_pool_create_with_auid(rados_t cluster,
+ const char *pool_name,
+ uint64_t auid);
+
+/**
+ * Create a pool with a specific CRUSH rule
+ *
+ * @param cluster the cluster in which the pool will be created
+ * @param pool_name the name of the new pool
+ * @param crush_rule_num which rule to use for placement in the new pool1
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_pool_create_with_crush_rule(rados_t cluster,
+ const char *pool_name,
+ uint8_t crush_rule_num);
+
+/**
+ * Create a pool with a specific CRUSH rule and auid
+ *
+ * This is a combination of rados_pool_create_with_crush_rule() and
+ * rados_pool_create_with_auid().
+ *
+ * @param cluster the cluster in which the pool will be created
+ * @param pool_name the name of the new pool
+ * @param crush_rule_num which rule to use for placement in the new pool2
+ * @param auid the id of the owner of the new pool
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_pool_create_with_all(rados_t cluster,
+ const char *pool_name,
+ uint64_t auid,
+ uint8_t crush_rule_num);
+
+/**
+ * Returns the pool that is the base tier for this pool.
+ *
+ * The return value is the ID of the pool that should be used to read from/write to.
+ * If tiering is not set up for the pool, returns \c pool.
+ *
+ * @param cluster the cluster the pool is in
+ * @param pool ID of the pool to query
+ * @param[out] base_tier base tier, or \c pool if tiering is not configured
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_pool_get_base_tier(rados_t cluster, int64_t pool,
+ int64_t* base_tier);
+
+/**
+ * Delete a pool and all data inside it
+ *
+ * The pool is removed from the cluster immediately,
+ * but the actual data is deleted in the background.
+ *
+ * @param cluster the cluster the pool is in
+ * @param pool_name which pool to delete
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_pool_delete(rados_t cluster, const char *pool_name);
+
+/**
+ * Attempt to change an io context's associated auid "owner"
+ *
+ * Requires that you have write permission on both the current and new
+ * auid.
+ *
+ * @param io reference to the pool to change.
+ * @param auid the auid you wish the io to have.
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_ioctx_pool_set_auid(rados_ioctx_t io, uint64_t auid);
+
+/**
+ * Get the auid of a pool
+ *
+ * @param io pool to query
+ * @param auid where to store the auid
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_ioctx_pool_get_auid(rados_ioctx_t io, uint64_t *auid);
+
+/* deprecated, use rados_ioctx_pool_requires_alignment2 instead */
+CEPH_RADOS_API int rados_ioctx_pool_requires_alignment(rados_ioctx_t io)
+ __attribute__((deprecated));
+
+/**
+ * Test whether the specified pool requires alignment or not.
+ *
+ * @param io pool to query
+ * @param requires 1 if alignment is supported, 0 if not.
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_ioctx_pool_requires_alignment2(rados_ioctx_t io,
+ int *requires);
+
+/* deprecated, use rados_ioctx_pool_required_alignment2 instead */
+CEPH_RADOS_API uint64_t rados_ioctx_pool_required_alignment(rados_ioctx_t io)
+ __attribute__((deprecated));
+
+/**
+ * Get the alignment flavor of a pool
+ *
+ * @param io pool to query
+ * @param alignment where to store the alignment flavor
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_ioctx_pool_required_alignment2(rados_ioctx_t io,
+ uint64_t *alignment);
+
+/**
+ * Get the pool id of the io context
+ *
+ * @param io the io context to query
+ * @returns the id of the pool the io context uses
+ */
+CEPH_RADOS_API int64_t rados_ioctx_get_id(rados_ioctx_t io);
+
+/**
+ * Get the pool name of the io context
+ *
+ * @param io the io context to query
+ * @param buf pointer to buffer where name will be stored
+ * @param maxlen size of buffer where name will be stored
+ * @returns length of string stored, or -ERANGE if buffer too small
+ */
+CEPH_RADOS_API int rados_ioctx_get_pool_name(rados_ioctx_t io, char *buf,
+ unsigned maxlen);
+
+/** @} pools */
+
+/**
+ * @name Object Locators
+ *
+ * @{
+ */
+
+/**
+ * Set the key for mapping objects to pgs within an io context.
+ *
+ * The key is used instead of the object name to determine which
+ * placement groups an object is put in. This affects all subsequent
+ * operations of the io context - until a different locator key is
+ * set, all objects in this io context will be placed in the same pg.
+ *
+ * @param io the io context to change
+ * @param key the key to use as the object locator, or NULL to discard
+ * any previously set key
+ */
+CEPH_RADOS_API void rados_ioctx_locator_set_key(rados_ioctx_t io,
+ const char *key);
+
+/**
+ * Set the namespace for objects within an io context
+ *
+ * The namespace specification further refines a pool into different
+ * domains. The mapping of objects to pgs is also based on this
+ * value.
+ *
+ * @param io the io context to change
+ * @param nspace the name to use as the namespace, or NULL use the
+ * default namespace
+ */
+CEPH_RADOS_API void rados_ioctx_set_namespace(rados_ioctx_t io,
+ const char *nspace);
+/** @} obj_loc */
+
+/**
+ * @name Listing Objects
+ * @{
+ */
+/**
+ * Start listing objects in a pool
+ *
+ * @param io the pool to list from
+ * @param ctx the handle to store list context in
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_nobjects_list_open(rados_ioctx_t io,
+ rados_list_ctx_t *ctx);
+
+/**
+ * Return hash position of iterator, rounded to the current PG
+ *
+ * @param ctx iterator marking where you are in the listing
+ * @returns current hash position, rounded to the current pg
+ */
+CEPH_RADOS_API uint32_t rados_nobjects_list_get_pg_hash_position(rados_list_ctx_t ctx);
+
+/**
+ * Reposition object iterator to a different hash position
+ *
+ * @param ctx iterator marking where you are in the listing
+ * @param pos hash position to move to
+ * @returns actual (rounded) position we moved to
+ */
+CEPH_RADOS_API uint32_t rados_nobjects_list_seek(rados_list_ctx_t ctx,
+ uint32_t pos);
+
+/**
+ * Reposition object iterator to a different position
+ *
+ * @param ctx iterator marking where you are in the listing
+ * @param cursor position to move to
+ * @returns rounded position we moved to
+ */
+CEPH_RADOS_API uint32_t rados_nobjects_list_seek_cursor(rados_list_ctx_t ctx,
+ rados_object_list_cursor cursor);
+
+/**
+ * Reposition object iterator to a different position
+ *
+ * The returned handle must be released with rados_object_list_cursor_free().
+ *
+ * @param ctx iterator marking where you are in the listing
+ * @param cursor where to store cursor
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_nobjects_list_get_cursor(rados_list_ctx_t ctx,
+ rados_object_list_cursor *cursor);
+
+/**
+ * Get the next object name and locator in the pool
+ *
+ * *entry and *key are valid until next call to rados_nobjects_list_*
+ *
+ * @param ctx iterator marking where you are in the listing
+ * @param entry where to store the name of the entry
+ * @param key where to store the object locator (set to NULL to ignore)
+ * @param nspace where to store the object namespace (set to NULL to ignore)
+ * @returns 0 on success, negative error code on failure
+ * @returns -ENOENT when there are no more objects to list
+ */
+CEPH_RADOS_API int rados_nobjects_list_next(rados_list_ctx_t ctx,
+ const char **entry,
+ const char **key,
+ const char **nspace);
+
+/**
+ * Close the object listing handle.
+ *
+ * This should be called when the handle is no longer needed.
+ * The handle should not be used after it has been closed.
+ *
+ * @param ctx the handle to close
+ */
+CEPH_RADOS_API void rados_nobjects_list_close(rados_list_ctx_t ctx);
+
+/**
+ * Get cursor handle pointing to the *beginning* of a pool.
+ *
+ * This is an opaque handle pointing to the start of a pool. It must
+ * be released with rados_object_list_cursor_free().
+ *
+ * @param io ioctx for the pool
+ * @returns handle for the pool, NULL on error (pool does not exist)
+ */
+CEPH_RADOS_API rados_object_list_cursor rados_object_list_begin(
+ rados_ioctx_t io);
+
+/**
+ * Get cursor handle pointing to the *end* of a pool.
+ *
+ * This is an opaque handle pointing to the start of a pool. It must
+ * be released with rados_object_list_cursor_free().
+ *
+ * @param io ioctx for the pool
+ * @returns handle for the pool, NULL on error (pool does not exist)
+ */
+CEPH_RADOS_API rados_object_list_cursor rados_object_list_end(rados_ioctx_t io);
+
+/**
+ * Check if a cursor has reached the end of a pool
+ *
+ * @param io ioctx
+ * @param cur cursor
+ * @returns 1 if the cursor has reached the end of the pool, 0 otherwise
+ */
+CEPH_RADOS_API int rados_object_list_is_end(rados_ioctx_t io,
+ rados_object_list_cursor cur);
+
+/**
+ * Release a cursor
+ *
+ * Release a cursor. The handle may not be used after this point.
+ *
+ * @param io ioctx
+ * @param cur cursor
+ */
+CEPH_RADOS_API void rados_object_list_cursor_free(rados_ioctx_t io,
+ rados_object_list_cursor cur);
+
+/**
+ * Compare two cursor positions
+ *
+ * Compare two cursors, and indicate whether the first cursor precedes,
+ * matches, or follows the second.
+ *
+ * @param io ioctx
+ * @param lhs first cursor
+ * @param rhs second cursor
+ * @returns -1, 0, or 1 for lhs < rhs, lhs == rhs, or lhs > rhs
+ */
+CEPH_RADOS_API int rados_object_list_cursor_cmp(rados_ioctx_t io,
+ rados_object_list_cursor lhs, rados_object_list_cursor rhs);
+
+/**
+ * @return the number of items set in the result array
+ */
+CEPH_RADOS_API int rados_object_list(rados_ioctx_t io,
+ const rados_object_list_cursor start,
+ const rados_object_list_cursor finish,
+ const size_t result_size,
+ const char *filter_buf,
+ const size_t filter_buf_len,
+ rados_object_list_item *results,
+ rados_object_list_cursor *next);
+
+CEPH_RADOS_API void rados_object_list_free(
+ const size_t result_size,
+ rados_object_list_item *results);
+
+/**
+ * Obtain cursors delineating a subset of a range. Use this
+ * when you want to split up the work of iterating over the
+ * global namespace. Expected use case is when you are iterating
+ * in parallel, with `m` workers, and each worker taking an id `n`.
+ *
+ * @param start start of the range to be sliced up (inclusive)
+ * @param finish end of the range to be sliced up (exclusive)
+ * @param m how many chunks to divide start-finish into
+ * @param n which of the m chunks you would like to get cursors for
+ * @param split_start cursor populated with start of the subrange (inclusive)
+ * @param split_finish cursor populated with end of the subrange (exclusive)
+ */
+CEPH_RADOS_API void rados_object_list_slice(rados_ioctx_t io,
+ const rados_object_list_cursor start,
+ const rados_object_list_cursor finish,
+ const size_t n,
+ const size_t m,
+ rados_object_list_cursor *split_start,
+ rados_object_list_cursor *split_finish);
+
+
+/** @} Listing Objects */
+
+/**
+ * @name Snapshots
+ *
+ * RADOS snapshots are based upon sequence numbers that form a
+ * snapshot context. They are pool-specific. The snapshot context
+ * consists of the current snapshot sequence number for a pool, and an
+ * array of sequence numbers at which snapshots were taken, in
+ * descending order. Whenever a snapshot is created or deleted, the
+ * snapshot sequence number for the pool is increased. To add a new
+ * snapshot, the new snapshot sequence number must be increased and
+ * added to the snapshot context.
+ *
+ * There are two ways to manage these snapshot contexts:
+ * -# within the RADOS cluster
+ * These are called pool snapshots, and store the snapshot context
+ * in the OSDMap. These represent a snapshot of all the objects in
+ * a pool.
+ * -# within the RADOS clients
+ * These are called self-managed snapshots, and push the
+ * responsibility for keeping track of the snapshot context to the
+ * clients. For every write, the client must send the snapshot
+ * context. In librados, this is accomplished with
+ * rados_selfmanaged_snap_set_write_ctx(). These are more
+ * difficult to manage, but are restricted to specific objects
+ * instead of applying to an entire pool.
+ *
+ * @{
+ */
+
+/**
+ * Create a pool-wide snapshot
+ *
+ * @param io the pool to snapshot
+ * @param snapname the name of the snapshot
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_ioctx_snap_create(rados_ioctx_t io,
+ const char *snapname);
+
+/**
+ * Delete a pool snapshot
+ *
+ * @param io the pool to delete the snapshot from
+ * @param snapname which snapshot to delete
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_ioctx_snap_remove(rados_ioctx_t io,
+ const char *snapname);
+
+/**
+ * Rollback an object to a pool snapshot
+ *
+ * The contents of the object will be the same as
+ * when the snapshot was taken.
+ *
+ * @param io the pool in which the object is stored
+ * @param oid the name of the object to rollback
+ * @param snapname which snapshot to rollback to
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_ioctx_snap_rollback(rados_ioctx_t io, const char *oid,
+ const char *snapname);
+
+/**
+ * @warning Deprecated: Use rados_ioctx_snap_rollback() instead
+ */
+CEPH_RADOS_API int rados_rollback(rados_ioctx_t io, const char *oid,
+ const char *snapname)
+ __attribute__((deprecated));
+
+/**
+ * Set the snapshot from which reads are performed.
+ *
+ * Subsequent reads will return data as it was at the time of that
+ * snapshot.
+ *
+ * @param io the io context to change
+ * @param snap the id of the snapshot to set, or LIBRADOS_SNAP_HEAD for no
+ * snapshot (i.e. normal operation)
+ */
+CEPH_RADOS_API void rados_ioctx_snap_set_read(rados_ioctx_t io,
+ rados_snap_t snap);
+
+/**
+ * Allocate an ID for a self-managed snapshot
+ *
+ * Get a unique ID to put in the snaphot context to create a
+ * snapshot. A clone of an object is not created until a write with
+ * the new snapshot context is completed.
+ *
+ * @param io the pool in which the snapshot will exist
+ * @param snapid where to store the newly allocated snapshot ID
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_ioctx_selfmanaged_snap_create(rados_ioctx_t io,
+ rados_snap_t *snapid);
+CEPH_RADOS_API void
+rados_aio_ioctx_selfmanaged_snap_create(rados_ioctx_t io,
+ rados_snap_t *snapid,
+ rados_completion_t completion);
+
+/**
+ * Remove a self-managed snapshot
+ *
+ * This increases the snapshot sequence number, which will cause
+ * snapshots to be removed lazily.
+ *
+ * @param io the pool in which the snapshot will exist
+ * @param snapid where to store the newly allocated snapshot ID
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_ioctx_selfmanaged_snap_remove(rados_ioctx_t io,
+ rados_snap_t snapid);
+CEPH_RADOS_API void
+rados_aio_ioctx_selfmanaged_snap_remove(rados_ioctx_t io,
+ rados_snap_t snapid,
+ rados_completion_t completion);
+
+/**
+ * Rollback an object to a self-managed snapshot
+ *
+ * The contents of the object will be the same as
+ * when the snapshot was taken.
+ *
+ * @param io the pool in which the object is stored
+ * @param oid the name of the object to rollback
+ * @param snapid which snapshot to rollback to
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_ioctx_selfmanaged_snap_rollback(rados_ioctx_t io,
+ const char *oid,
+ rados_snap_t snapid);
+
+/**
+ * Set the snapshot context for use when writing to objects
+ *
+ * This is stored in the io context, and applies to all future writes.
+ *
+ * @param io the io context to change
+ * @param seq the newest snapshot sequence number for the pool
+ * @param snaps array of snapshots in sorted by descending id
+ * @param num_snaps how many snaphosts are in the snaps array
+ * @returns 0 on success, negative error code on failure
+ * @returns -EINVAL if snaps are not in descending order
+ */
+CEPH_RADOS_API int rados_ioctx_selfmanaged_snap_set_write_ctx(rados_ioctx_t io,
+ rados_snap_t seq,
+ rados_snap_t *snaps,
+ int num_snaps);
+
+/**
+ * List all the ids of pool snapshots
+ *
+ * If the output array does not have enough space to fit all the
+ * snapshots, -ERANGE is returned and the caller should retry with a
+ * larger array.
+ *
+ * @param io the pool to read from
+ * @param snaps where to store the results
+ * @param maxlen the number of rados_snap_t that fit in the snaps array
+ * @returns number of snapshots on success, negative error code on failure
+ * @returns -ERANGE is returned if the snaps array is too short
+ */
+CEPH_RADOS_API int rados_ioctx_snap_list(rados_ioctx_t io, rados_snap_t *snaps,
+ int maxlen);
+
+/**
+ * Get the id of a pool snapshot
+ *
+ * @param io the pool to read from
+ * @param name the snapshot to find
+ * @param id where to store the result
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_ioctx_snap_lookup(rados_ioctx_t io, const char *name,
+ rados_snap_t *id);
+
+/**
+ * Get the name of a pool snapshot
+ *
+ * @param io the pool to read from
+ * @param id the snapshot to find
+ * @param name where to store the result
+ * @param maxlen the size of the name array
+ * @returns 0 on success, negative error code on failure
+ * @returns -ERANGE if the name array is too small
+ */
+CEPH_RADOS_API int rados_ioctx_snap_get_name(rados_ioctx_t io, rados_snap_t id,
+ char *name, int maxlen);
+
+/**
+ * Find when a pool snapshot occurred
+ *
+ * @param io the pool the snapshot was taken in
+ * @param id the snapshot to lookup
+ * @param t where to store the result
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_ioctx_snap_get_stamp(rados_ioctx_t io, rados_snap_t id,
+ time_t *t);
+
+/** @} Snapshots */
+
+/**
+ * @name Synchronous I/O
+ * Writes are replicated to a number of OSDs based on the
+ * configuration of the pool they are in. These write functions block
+ * until data is in memory on all replicas of the object they're
+ * writing to - they are equivalent to doing the corresponding
+ * asynchronous write, and the calling
+ * rados_ioctx_wait_for_complete(). For greater data safety, use the
+ * asynchronous functions and rados_aio_wait_for_safe().
+ *
+ * @{
+ */
+
+/**
+ * Return the version of the last object read or written to.
+ *
+ * This exposes the internal version number of the last object read or
+ * written via this io context
+ *
+ * @param io the io context to check
+ * @returns last read or written object version
+ */
+CEPH_RADOS_API uint64_t rados_get_last_version(rados_ioctx_t io);
+
+/**
+ * Write *len* bytes from *buf* into the *oid* object, starting at
+ * offset *off*. The value of *len* must be <= UINT_MAX/2.
+ *
+ * @note This will never return a positive value not equal to len.
+ * @param io the io context in which the write will occur
+ * @param oid name of the object
+ * @param buf data to write
+ * @param len length of the data, in bytes
+ * @param off byte offset in the object to begin writing at
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_write(rados_ioctx_t io, const char *oid,
+ const char *buf, size_t len, uint64_t off);
+
+/**
+ * Write *len* bytes from *buf* into the *oid* object. The value of
+ * *len* must be <= UINT_MAX/2.
+ *
+ * The object is filled with the provided data. If the object exists,
+ * it is atomically truncated and then written.
+ *
+ * @param io the io context in which the write will occur
+ * @param oid name of the object
+ * @param buf data to write
+ * @param len length of the data, in bytes
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_write_full(rados_ioctx_t io, const char *oid,
+ const char *buf, size_t len);
+
+/**
+ * Write the same *data_len* bytes from *buf* multiple times into the
+ * *oid* object. *write_len* bytes are written in total, which must be
+ * a multiple of *data_len*. The value of *write_len* and *data_len*
+ * must be <= UINT_MAX/2.
+ *
+ * @param io the io context in which the write will occur
+ * @param oid name of the object
+ * @param buf data to write
+ * @param data_len length of the data, in bytes
+ * @param write_len the total number of bytes to write
+ * @param off byte offset in the object to begin writing at
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_writesame(rados_ioctx_t io, const char *oid,
+ const char *buf, size_t data_len,
+ size_t write_len, uint64_t off);
+
+/**
+ * Append *len* bytes from *buf* into the *oid* object. The value of
+ * *len* must be <= UINT_MAX/2.
+ *
+ * @param io the context to operate in
+ * @param oid the name of the object
+ * @param buf the data to append
+ * @param len length of buf (in bytes)
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_append(rados_ioctx_t io, const char *oid,
+ const char *buf, size_t len);
+
+/**
+ * Read data from an object
+ *
+ * The io context determines the snapshot to read from, if any was set
+ * by rados_ioctx_snap_set_read().
+ *
+ * @param io the context in which to perform the read
+ * @param oid the name of the object to read from
+ * @param buf where to store the results
+ * @param len the number of bytes to read
+ * @param off the offset to start reading from in the object
+ * @returns number of bytes read on success, negative error code on
+ * failure
+ */
+CEPH_RADOS_API int rados_read(rados_ioctx_t io, const char *oid, char *buf,
+ size_t len, uint64_t off);
+
+/**
+ * Compute checksum from object data
+ *
+ * The io context determines the snapshot to checksum, if any was set
+ * by rados_ioctx_snap_set_read(). The length of the init_value and
+ * resulting checksum are dependent upon the checksum type:
+ *
+ * XXHASH64: le64
+ * XXHASH32: le32
+ * CRC32C: le32
+ *
+ * The checksum result is encoded the following manner:
+ *
+ * le32 num_checksum_chunks
+ * {
+ * leXX checksum for chunk (where XX = appropriate size for the checksum type)
+ * } * num_checksum_chunks
+ *
+ * @param io the context in which to perform the checksum
+ * @param oid the name of the object to checksum
+ * @param type the checksum algorithm to utilize
+ * @param init_value the init value for the algorithm
+ * @param init_value_len the length of the init value
+ * @param len the number of bytes to checksum
+ * @param off the offset to start checksuming in the object
+ * @param chunk_size optional length-aligned chunk size for checksums
+ * @param pchecksum where to store the checksum result
+ * @param checksum_len the number of bytes available for the result
+ * @return negative error code on failure
+ */
+CEPH_RADOS_API int rados_checksum(rados_ioctx_t io, const char *oid,
+ rados_checksum_type_t type,
+ const char *init_value, size_t init_value_len,
+ size_t len, uint64_t off, size_t chunk_size,
+ char *pchecksum, size_t checksum_len);
+
+/**
+ * Delete an object
+ *
+ * @note This does not delete any snapshots of the object.
+ *
+ * @param io the pool to delete the object from
+ * @param oid the name of the object to delete
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_remove(rados_ioctx_t io, const char *oid);
+
+/**
+ * Resize an object
+ *
+ * If this enlarges the object, the new area is logically filled with
+ * zeroes. If this shrinks the object, the excess data is removed.
+ *
+ * @param io the context in which to truncate
+ * @param oid the name of the object
+ * @param size the new size of the object in bytes
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_trunc(rados_ioctx_t io, const char *oid,
+ uint64_t size);
+
+/**
+ * Compare an on-disk object range with a buffer
+ *
+ * @param io the context in which to perform the comparison
+ * @param o name of the object
+ * @param cmp_buf buffer containing bytes to be compared with object contents
+ * @param cmp_len length to compare and size of @cmp_buf in bytes
+ * @param off object byte offset at which to start the comparison
+ * @returns 0 on success, negative error code on failure,
+ * (-MAX_ERRNO - mismatch_off) on mismatch
+ */
+CEPH_RADOS_API int rados_cmpext(rados_ioctx_t io, const char *o,
+ const char *cmp_buf, size_t cmp_len,
+ uint64_t off);
+
+/**
+ * @name Xattrs
+ * Extended attributes are stored as extended attributes on the files
+ * representing an object on the OSDs. Thus, they have the same
+ * limitations as the underlying filesystem. On ext4, this means that
+ * the total data stored in xattrs cannot exceed 4KB.
+ *
+ * @{
+ */
+
+/**
+ * Get the value of an extended attribute on an object.
+ *
+ * @param io the context in which the attribute is read
+ * @param o name of the object
+ * @param name which extended attribute to read
+ * @param buf where to store the result
+ * @param len size of buf in bytes
+ * @returns length of xattr value on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_getxattr(rados_ioctx_t io, const char *o,
+ const char *name, char *buf, size_t len);
+
+/**
+ * Set an extended attribute on an object.
+ *
+ * @param io the context in which xattr is set
+ * @param o name of the object
+ * @param name which extended attribute to set
+ * @param buf what to store in the xattr
+ * @param len the number of bytes in buf
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_setxattr(rados_ioctx_t io, const char *o,
+ const char *name, const char *buf,
+ size_t len);
+
+/**
+ * Delete an extended attribute from an object.
+ *
+ * @param io the context in which to delete the xattr
+ * @param o the name of the object
+ * @param name which xattr to delete
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_rmxattr(rados_ioctx_t io, const char *o,
+ const char *name);
+
+/**
+ * Start iterating over xattrs on an object.
+ *
+ * @post iter is a valid iterator
+ *
+ * @param io the context in which to list xattrs
+ * @param oid name of the object
+ * @param iter where to store the iterator
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_getxattrs(rados_ioctx_t io, const char *oid,
+ rados_xattrs_iter_t *iter);
+
+/**
+ * Get the next xattr on the object
+ *
+ * @pre iter is a valid iterator
+ *
+ * @post name is the NULL-terminated name of the next xattr, and val
+ * contains the value of the xattr, which is of length len. If the end
+ * of the list has been reached, name and val are NULL, and len is 0.
+ *
+ * @param iter iterator to advance
+ * @param name where to store the name of the next xattr
+ * @param val where to store the value of the next xattr
+ * @param len the number of bytes in val
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_getxattrs_next(rados_xattrs_iter_t iter,
+ const char **name, const char **val,
+ size_t *len);
+
+/**
+ * Close the xattr iterator.
+ *
+ * iter should not be used after this is called.
+ *
+ * @param iter the iterator to close
+ */
+CEPH_RADOS_API void rados_getxattrs_end(rados_xattrs_iter_t iter);
+
+/** @} Xattrs */
+
+/**
+ * Get the next omap key/value pair on the object
+ *
+ * @pre iter is a valid iterator
+ *
+ * @post key and val are the next key/value pair. key is
+ * null-terminated, and val has length len. If the end of the list has
+ * been reached, key and val are NULL, and len is 0. key and val will
+ * not be accessible after rados_omap_get_end() is called on iter, so
+ * if they are needed after that they should be copied.
+ *
+ * @param iter iterator to advance
+ * @param key where to store the key of the next omap entry
+ * @param val where to store the value of the next omap entry
+ * @param len where to store the number of bytes in val
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_omap_get_next(rados_omap_iter_t iter,
+ char **key,
+ char **val,
+ size_t *len);
+
+/**
+ * Close the omap iterator.
+ *
+ * iter should not be used after this is called.
+ *
+ * @param iter the iterator to close
+ */
+CEPH_RADOS_API void rados_omap_get_end(rados_omap_iter_t iter);
+
+/**
+ * Get object stats (size/mtime)
+ *
+ * TODO: when are these set, and by whom? can they be out of date?
+ *
+ * @param io ioctx
+ * @param o object name
+ * @param psize where to store object size
+ * @param pmtime where to store modification time
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_stat(rados_ioctx_t io, const char *o, uint64_t *psize,
+ time_t *pmtime);
+
+/**
+ * Update tmap (trivial map)
+ *
+ * Do compound update to a tmap object, inserting or deleting some
+ * number of records. cmdbuf is a series of operation byte
+ * codes, following by command payload. Each command is a single-byte
+ * command code, whose value is one of CEPH_OSD_TMAP_*.
+ *
+ * - update tmap 'header'
+ * - 1 byte = CEPH_OSD_TMAP_HDR
+ * - 4 bytes = data length (little endian)
+ * - N bytes = data
+ *
+ * - insert/update one key/value pair
+ * - 1 byte = CEPH_OSD_TMAP_SET
+ * - 4 bytes = key name length (little endian)
+ * - N bytes = key name
+ * - 4 bytes = data length (little endian)
+ * - M bytes = data
+ *
+ * - insert one key/value pair; return -EEXIST if it already exists.
+ * - 1 byte = CEPH_OSD_TMAP_CREATE
+ * - 4 bytes = key name length (little endian)
+ * - N bytes = key name
+ * - 4 bytes = data length (little endian)
+ * - M bytes = data
+ *
+ * - remove one key/value pair
+ * - 1 byte = CEPH_OSD_TMAP_RM
+ * - 4 bytes = key name length (little endian)
+ * - N bytes = key name
+ *
+ * Restrictions:
+ * - The HDR update must preceed any key/value updates.
+ * - All key/value updates must be in lexicographically sorted order
+ * in cmdbuf.
+ * - You can read/write to a tmap object via the regular APIs, but
+ * you should be careful not to corrupt it. Also be aware that the
+ * object format may change without notice.
+ *
+ * @param io ioctx
+ * @param o object name
+ * @param cmdbuf command buffer
+ * @param cmdbuflen command buffer length in bytes
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_tmap_update(rados_ioctx_t io, const char *o,
+ const char *cmdbuf, size_t cmdbuflen);
+
+/**
+ * Store complete tmap (trivial map) object
+ *
+ * Put a full tmap object into the store, replacing what was there.
+ *
+ * The format of buf is:
+ * - 4 bytes - length of header (little endian)
+ * - N bytes - header data
+ * - 4 bytes - number of keys (little endian)
+ *
+ * and for each key,
+ * - 4 bytes - key name length (little endian)
+ * - N bytes - key name
+ * - 4 bytes - value length (little endian)
+ * - M bytes - value data
+ *
+ * @param io ioctx
+ * @param o object name
+ * @param buf buffer
+ * @param buflen buffer length in bytes
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_tmap_put(rados_ioctx_t io, const char *o,
+ const char *buf, size_t buflen);
+
+/**
+ * Fetch complete tmap (trivial map) object
+ *
+ * Read a full tmap object. See rados_tmap_put() for the format the
+ * data is returned in.
+ *
+ * @param io ioctx
+ * @param o object name
+ * @param buf buffer
+ * @param buflen buffer length in bytes
+ * @returns 0 on success, negative error code on failure
+ * @returns -ERANGE if buf isn't big enough
+ */
+CEPH_RADOS_API int rados_tmap_get(rados_ioctx_t io, const char *o, char *buf,
+ size_t buflen);
+
+/**
+ * Execute an OSD class method on an object
+ *
+ * The OSD has a plugin mechanism for performing complicated
+ * operations on an object atomically. These plugins are called
+ * classes. This function allows librados users to call the custom
+ * methods. The input and output formats are defined by the class.
+ * Classes in ceph.git can be found in src/cls subdirectories
+ *
+ * @param io the context in which to call the method
+ * @param oid the object to call the method on
+ * @param cls the name of the class
+ * @param method the name of the method
+ * @param in_buf where to find input
+ * @param in_len length of in_buf in bytes
+ * @param buf where to store output
+ * @param out_len length of buf in bytes
+ * @returns the length of the output, or
+ * -ERANGE if out_buf does not have enough space to store it (For methods that return data). For
+ * methods that don't return data, the return value is
+ * method-specific.
+ */
+CEPH_RADOS_API int rados_exec(rados_ioctx_t io, const char *oid,
+ const char *cls, const char *method,
+ const char *in_buf, size_t in_len, char *buf,
+ size_t out_len);
+
+
+/** @} Synchronous I/O */
+
+/**
+ * @name Asynchronous I/O
+ * Read and write to objects without blocking.
+ *
+ * @{
+ */
+
+/**
+ * @typedef rados_callback_t
+ * Callbacks for asynchrous operations take two parameters:
+ * - cb the completion that has finished
+ * - arg application defined data made available to the callback function
+ */
+typedef void (*rados_callback_t)(rados_completion_t cb, void *arg);
+
+/**
+ * Constructs a completion to use with asynchronous operations
+ *
+ * The complete and safe callbacks correspond to operations being
+ * acked and committed, respectively. The callbacks are called in
+ * order of receipt, so the safe callback may be triggered before the
+ * complete callback, and vice versa. This is affected by journalling
+ * on the OSDs.
+ *
+ * TODO: more complete documentation of this elsewhere (in the RADOS docs?)
+ *
+ * @note Read operations only get a complete callback.
+ * @note BUG: this should check for ENOMEM instead of throwing an exception
+ *
+ * @param cb_arg application-defined data passed to the callback functions
+ * @param cb_complete the function to be called when the operation is
+ * in memory on all relpicas
+ * @param cb_safe the function to be called when the operation is on
+ * stable storage on all replicas
+ * @param pc where to store the completion
+ * @returns 0
+ */
+CEPH_RADOS_API int rados_aio_create_completion(void *cb_arg,
+ rados_callback_t cb_complete,
+ rados_callback_t cb_safe,
+ rados_completion_t *pc);
+
+/**
+ * Block until an operation completes
+ *
+ * This means it is in memory on all replicas.
+ *
+ * @note BUG: this should be void
+ *
+ * @param c operation to wait for
+ * @returns 0
+ */
+CEPH_RADOS_API int rados_aio_wait_for_complete(rados_completion_t c);
+
+/**
+ * Block until an operation is safe
+ *
+ * This means it is on stable storage on all replicas.
+ *
+ * @note BUG: this should be void
+ *
+ * @param c operation to wait for
+ * @returns 0
+ */
+CEPH_RADOS_API int rados_aio_wait_for_safe(rados_completion_t c);
+
+/**
+ * Has an asynchronous operation completed?
+ *
+ * @warning This does not imply that the complete callback has
+ * finished
+ *
+ * @param c async operation to inspect
+ * @returns whether c is complete
+ */
+CEPH_RADOS_API int rados_aio_is_complete(rados_completion_t c);
+
+/**
+ * Is an asynchronous operation safe?
+ *
+ * @warning This does not imply that the safe callback has
+ * finished
+ *
+ * @param c async operation to inspect
+ * @returns whether c is safe
+ */
+CEPH_RADOS_API int rados_aio_is_safe(rados_completion_t c);
+
+/**
+ * Block until an operation completes and callback completes
+ *
+ * This means it is in memory on all replicas and can be read.
+ *
+ * @note BUG: this should be void
+ *
+ * @param c operation to wait for
+ * @returns 0
+ */
+CEPH_RADOS_API int rados_aio_wait_for_complete_and_cb(rados_completion_t c);
+
+/**
+ * Block until an operation is safe and callback has completed
+ *
+ * This means it is on stable storage on all replicas.
+ *
+ * @note BUG: this should be void
+ *
+ * @param c operation to wait for
+ * @returns 0
+ */
+CEPH_RADOS_API int rados_aio_wait_for_safe_and_cb(rados_completion_t c);
+
+/**
+ * Has an asynchronous operation and callback completed
+ *
+ * @param c async operation to inspect
+ * @returns whether c is complete
+ */
+CEPH_RADOS_API int rados_aio_is_complete_and_cb(rados_completion_t c);
+
+/**
+ * Is an asynchronous operation safe and has the callback completed
+ *
+ * @param c async operation to inspect
+ * @returns whether c is safe
+ */
+CEPH_RADOS_API int rados_aio_is_safe_and_cb(rados_completion_t c);
+
+/**
+ * Get the return value of an asychronous operation
+ *
+ * The return value is set when the operation is complete or safe,
+ * whichever comes first.
+ *
+ * @pre The operation is safe or complete
+ *
+ * @note BUG: complete callback may never be called when the safe
+ * message is received before the complete message
+ *
+ * @param c async operation to inspect
+ * @returns return value of the operation
+ */
+CEPH_RADOS_API int rados_aio_get_return_value(rados_completion_t c);
+
+/**
+ * Get the internal object version of the target of an asychronous operation
+ *
+ * The return value is set when the operation is complete or safe,
+ * whichever comes first.
+ *
+ * @pre The operation is safe or complete
+ *
+ * @note BUG: complete callback may never be called when the safe
+ * message is received before the complete message
+ *
+ * @param c async operation to inspect
+ * @returns version number of the asychronous operation's target
+ */
+CEPH_RADOS_API uint64_t rados_aio_get_version(rados_completion_t c);
+
+/**
+ * Release a completion
+ *
+ * Call this when you no longer need the completion. It may not be
+ * freed immediately if the operation is not acked and committed.
+ *
+ * @param c completion to release
+ */
+CEPH_RADOS_API void rados_aio_release(rados_completion_t c);
+
+/**
+ * Write data to an object asynchronously
+ *
+ * Queues the write and returns. The return value of the completion
+ * will be 0 on success, negative error code on failure.
+ *
+ * @param io the context in which the write will occur
+ * @param oid name of the object
+ * @param completion what to do when the write is safe and complete
+ * @param buf data to write
+ * @param len length of the data, in bytes
+ * @param off byte offset in the object to begin writing at
+ * @returns 0 on success, -EROFS if the io context specifies a snap_seq
+ * other than LIBRADOS_SNAP_HEAD
+ */
+CEPH_RADOS_API int rados_aio_write(rados_ioctx_t io, const char *oid,
+ rados_completion_t completion,
+ const char *buf, size_t len, uint64_t off);
+
+/**
+ * Asychronously append data to an object
+ *
+ * Queues the append and returns.
+ *
+ * The return value of the completion will be 0 on success, negative
+ * error code on failure.
+ *
+ * @param io the context to operate in
+ * @param oid the name of the object
+ * @param completion what to do when the append is safe and complete
+ * @param buf the data to append
+ * @param len length of buf (in bytes)
+ * @returns 0 on success, -EROFS if the io context specifies a snap_seq
+ * other than LIBRADOS_SNAP_HEAD
+ */
+CEPH_RADOS_API int rados_aio_append(rados_ioctx_t io, const char *oid,
+ rados_completion_t completion,
+ const char *buf, size_t len);
+
+/**
+ * Asychronously write an entire object
+ *
+ * The object is filled with the provided data. If the object exists,
+ * it is atomically truncated and then written.
+ * Queues the write_full and returns.
+ *
+ * The return value of the completion will be 0 on success, negative
+ * error code on failure.
+ *
+ * @param io the io context in which the write will occur
+ * @param oid name of the object
+ * @param completion what to do when the write_full is safe and complete
+ * @param buf data to write
+ * @param len length of the data, in bytes
+ * @returns 0 on success, -EROFS if the io context specifies a snap_seq
+ * other than LIBRADOS_SNAP_HEAD
+ */
+CEPH_RADOS_API int rados_aio_write_full(rados_ioctx_t io, const char *oid,
+ rados_completion_t completion,
+ const char *buf, size_t len);
+
+/**
+ * Asychronously write the same buffer multiple times
+ *
+ * Queues the writesame and returns.
+ *
+ * The return value of the completion will be 0 on success, negative
+ * error code on failure.
+ *
+ * @param io the io context in which the write will occur
+ * @param oid name of the object
+ * @param completion what to do when the writesame is safe and complete
+ * @param buf data to write
+ * @param data_len length of the data, in bytes
+ * @param write_len the total number of bytes to write
+ * @param off byte offset in the object to begin writing at
+ * @returns 0 on success, -EROFS if the io context specifies a snap_seq
+ * other than LIBRADOS_SNAP_HEAD
+ */
+CEPH_RADOS_API int rados_aio_writesame(rados_ioctx_t io, const char *oid,
+ rados_completion_t completion,
+ const char *buf, size_t data_len,
+ size_t write_len, uint64_t off);
+
+/**
+ * Asychronously remove an object
+ *
+ * Queues the remove and returns.
+ *
+ * The return value of the completion will be 0 on success, negative
+ * error code on failure.
+ *
+ * @param io the context to operate in
+ * @param oid the name of the object
+ * @param completion what to do when the remove is safe and complete
+ * @returns 0 on success, -EROFS if the io context specifies a snap_seq
+ * other than LIBRADOS_SNAP_HEAD
+ */
+CEPH_RADOS_API int rados_aio_remove(rados_ioctx_t io, const char *oid,
+ rados_completion_t completion);
+
+/**
+ * Asychronously read data from an object
+ *
+ * The io context determines the snapshot to read from, if any was set
+ * by rados_ioctx_snap_set_read().
+ *
+ * The return value of the completion will be number of bytes read on
+ * success, negative error code on failure.
+ *
+ * @note only the 'complete' callback of the completion will be called.
+ *
+ * @param io the context in which to perform the read
+ * @param oid the name of the object to read from
+ * @param completion what to do when the read is complete
+ * @param buf where to store the results
+ * @param len the number of bytes to read
+ * @param off the offset to start reading from in the object
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_aio_read(rados_ioctx_t io, const char *oid,
+ rados_completion_t completion,
+ char *buf, size_t len, uint64_t off);
+
+/**
+ * Block until all pending writes in an io context are safe
+ *
+ * This is not equivalent to calling rados_aio_wait_for_safe() on all
+ * write completions, since this waits for the associated callbacks to
+ * complete as well.
+ *
+ * @note BUG: always returns 0, should be void or accept a timeout
+ *
+ * @param io the context to flush
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_aio_flush(rados_ioctx_t io);
+
+
+/**
+ * Schedule a callback for when all currently pending
+ * aio writes are safe. This is a non-blocking version of
+ * rados_aio_flush().
+ *
+ * @param io the context to flush
+ * @param completion what to do when the writes are safe
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_aio_flush_async(rados_ioctx_t io,
+ rados_completion_t completion);
+
+
+/**
+ * Asynchronously get object stats (size/mtime)
+ *
+ * @param io ioctx
+ * @param o object name
+ * @param psize where to store object size
+ * @param pmtime where to store modification time
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_aio_stat(rados_ioctx_t io, const char *o,
+ rados_completion_t completion,
+ uint64_t *psize, time_t *pmtime);
+
+/**
+ * Asynchronously compare an on-disk object range with a buffer
+ *
+ * @param io the context in which to perform the comparison
+ * @param o the name of the object to compare with
+ * @param completion what to do when the comparison is complete
+ * @param cmp_buf buffer containing bytes to be compared with object contents
+ * @param cmp_len length to compare and size of @cmp_buf in bytes
+ * @param off object byte offset at which to start the comparison
+ * @returns 0 on success, negative error code on failure,
+ * (-MAX_ERRNO - mismatch_off) on mismatch
+ */
+CEPH_RADOS_API int rados_aio_cmpext(rados_ioctx_t io, const char *o,
+ rados_completion_t completion,
+ const char *cmp_buf,
+ size_t cmp_len,
+ uint64_t off);
+
+/**
+ * Cancel async operation
+ *
+ * @param io ioctx
+ * @param completion completion handle
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_aio_cancel(rados_ioctx_t io,
+ rados_completion_t completion);
+
+/**
+ * Asynchronously execute an OSD class method on an object
+ *
+ * The OSD has a plugin mechanism for performing complicated
+ * operations on an object atomically. These plugins are called
+ * classes. This function allows librados users to call the custom
+ * methods. The input and output formats are defined by the class.
+ * Classes in ceph.git can be found in src/cls subdirectories
+ *
+ * @param io the context in which to call the method
+ * @param oid the object to call the method on
+ * @param cls the name of the class
+ * @param method the name of the method
+ * @param in_buf where to find input
+ * @param in_len length of in_buf in bytes
+ * @param buf where to store output
+ * @param out_len length of buf in bytes
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_aio_exec(rados_ioctx_t io, const char *o,
+ rados_completion_t completion,
+ const char *cls, const char *method,
+ const char *in_buf, size_t in_len,
+ char *buf, size_t out_len);
+
+/** @} Asynchronous I/O */
+
+/**
+ * @name Asynchronous Xattrs
+ * Extended attributes are stored as extended attributes on the files
+ * representing an object on the OSDs. Thus, they have the same
+ * limitations as the underlying filesystem. On ext4, this means that
+ * the total data stored in xattrs cannot exceed 4KB.
+ *
+ * @{
+ */
+
+/**
+ * Asynchronously get the value of an extended attribute on an object.
+ *
+ * @param io the context in which the attribute is read
+ * @param o name of the object
+ * @param completion what to do when the getxattr completes
+ * @param name which extended attribute to read
+ * @param buf where to store the result
+ * @param len size of buf in bytes
+ * @returns length of xattr value on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_aio_getxattr(rados_ioctx_t io, const char *o,
+ rados_completion_t completion,
+ const char *name, char *buf, size_t len);
+
+/**
+ * Asynchronously set an extended attribute on an object.
+ *
+ * @param io the context in which xattr is set
+ * @param o name of the object
+ * @param completion what to do when the setxattr completes
+ * @param name which extended attribute to set
+ * @param buf what to store in the xattr
+ * @param len the number of bytes in buf
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_aio_setxattr(rados_ioctx_t io, const char *o,
+ rados_completion_t completion,
+ const char *name, const char *buf,
+ size_t len);
+
+/**
+ * Asynchronously delete an extended attribute from an object.
+ *
+ * @param io the context in which to delete the xattr
+ * @param o the name of the object
+ * @param completion what to do when the rmxattr completes
+ * @param name which xattr to delete
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_aio_rmxattr(rados_ioctx_t io, const char *o,
+ rados_completion_t completion,
+ const char *name);
+
+/**
+ * Asynchronously start iterating over xattrs on an object.
+ *
+ * @post iter is a valid iterator
+ *
+ * @param io the context in which to list xattrs
+ * @param oid name of the object
+ * @param iter where to store the iterator
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_aio_getxattrs(rados_ioctx_t io, const char *oid,
+ rados_completion_t completion,
+ rados_xattrs_iter_t *iter);
+
+/** @} Asynchronous Xattrs */
+
+/**
+ * @name Watch/Notify
+ *
+ * Watch/notify is a protocol to help communicate among clients. It
+ * can be used to sychronize client state. All that's needed is a
+ * well-known object name (for example, rbd uses the header object of
+ * an image).
+ *
+ * Watchers register an interest in an object, and receive all
+ * notifies on that object. A notify attempts to communicate with all
+ * clients watching an object, and blocks on the notifier until each
+ * client responds or a timeout is reached.
+ *
+ * See rados_watch() and rados_notify() for more details.
+ *
+ * @{
+ */
+
+/**
+ * @typedef rados_watchcb_t
+ *
+ * Callback activated when a notify is received on a watched
+ * object.
+ *
+ * @param opcode undefined
+ * @param ver version of the watched object
+ * @param arg application-specific data
+ *
+ * @note BUG: opcode is an internal detail that shouldn't be exposed
+ * @note BUG: ver is unused
+ */
+typedef void (*rados_watchcb_t)(uint8_t opcode, uint64_t ver, void *arg);
+
+/**
+ * @typedef rados_watchcb2_t
+ *
+ * Callback activated when a notify is received on a watched
+ * object.
+ *
+ * @param arg opaque user-defined value provided to rados_watch2()
+ * @param notify_id an id for this notify event
+ * @param handle the watcher handle we are notifying
+ * @param notifier_id the unique client id for the notifier
+ * @param data payload from the notifier
+ * @param datalen length of payload buffer
+ */
+typedef void (*rados_watchcb2_t)(void *arg,
+ uint64_t notify_id,
+ uint64_t handle,
+ uint64_t notifier_id,
+ void *data,
+ size_t data_len);
+
+/**
+ * @typedef rados_watcherrcb_t
+ *
+ * Callback activated when we encounter an error with the watch session.
+ * This can happen when the location of the objects moves within the
+ * cluster and we fail to register our watch with the new object location,
+ * or when our connection with the object OSD is otherwise interrupted and
+ * we may have missed notify events.
+ *
+ * @param pre opaque user-defined value provided to rados_watch2()
+ * @param err error code
+ */
+ typedef void (*rados_watcherrcb_t)(void *pre, uint64_t cookie, int err);
+
+/**
+ * Register an interest in an object
+ *
+ * A watch operation registers the client as being interested in
+ * notifications on an object. OSDs keep track of watches on
+ * persistent storage, so they are preserved across cluster changes by
+ * the normal recovery process. If the client loses its connection to
+ * the primary OSD for a watched object, the watch will be removed
+ * after 30 seconds. Watches are automatically reestablished when a new
+ * connection is made, or a placement group switches OSDs.
+ *
+ * @note BUG: librados should provide a way for watchers to notice connection resets
+ * @note BUG: the ver parameter does not work, and -ERANGE will never be returned
+ * (See URL tracker.ceph.com/issues/2592)
+ *
+ * @param io the pool the object is in
+ * @param o the object to watch
+ * @param ver expected version of the object
+ * @param cookie where to store the internal id assigned to this watch
+ * @param watchcb what to do when a notify is received on this object
+ * @param arg application defined data to pass when watchcb is called
+ * @returns 0 on success, negative error code on failure
+ * @returns -ERANGE if the version of the object is greater than ver
+ */
+CEPH_RADOS_API int rados_watch(rados_ioctx_t io, const char *o, uint64_t ver,
+ uint64_t *cookie,
+ rados_watchcb_t watchcb, void *arg)
+ __attribute__((deprecated));
+
+
+/**
+ * Register an interest in an object
+ *
+ * A watch operation registers the client as being interested in
+ * notifications on an object. OSDs keep track of watches on
+ * persistent storage, so they are preserved across cluster changes by
+ * the normal recovery process. If the client loses its connection to the
+ * primary OSD for a watched object, the watch will be removed after
+ * a timeout configured with osd_client_watch_timeout.
+ * Watches are automatically reestablished when a new
+ * connection is made, or a placement group switches OSDs.
+ *
+ * @param io the pool the object is in
+ * @param o the object to watch
+ * @param cookie where to store the internal id assigned to this watch
+ * @param watchcb what to do when a notify is received on this object
+ * @param watcherrcb what to do when the watch session encounters an error
+ * @param arg opaque value to pass to the callback
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_watch2(rados_ioctx_t io, const char *o, uint64_t *cookie,
+ rados_watchcb2_t watchcb,
+ rados_watcherrcb_t watcherrcb,
+ void *arg);
+
+/**
+ * Register an interest in an object
+ *
+ * A watch operation registers the client as being interested in
+ * notifications on an object. OSDs keep track of watches on
+ * persistent storage, so they are preserved across cluster changes by
+ * the normal recovery process. Watches are automatically reestablished when a new
+ * connection is made, or a placement group switches OSDs.
+ *
+ * @param io the pool the object is in
+ * @param o the object to watch
+ * @param cookie where to store the internal id assigned to this watch
+ * @param watchcb what to do when a notify is received on this object
+ * @param watcherrcb what to do when the watch session encounters an error
+ * @param timeout how many seconds the connection will keep after disconnection
+ * @param arg opaque value to pass to the callback
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_watch3(rados_ioctx_t io, const char *o, uint64_t *cookie,
+ rados_watchcb2_t watchcb,
+ rados_watcherrcb_t watcherrcb,
+ uint32_t timeout,
+ void *arg);
+
+/**
+ * Asynchronous register an interest in an object
+ *
+ * A watch operation registers the client as being interested in
+ * notifications on an object. OSDs keep track of watches on
+ * persistent storage, so they are preserved across cluster changes by
+ * the normal recovery process. If the client loses its connection to
+ * the primary OSD for a watched object, the watch will be removed
+ * after 30 seconds. Watches are automatically reestablished when a new
+ * connection is made, or a placement group switches OSDs.
+ *
+ * @param io the pool the object is in
+ * @param o the object to watch
+ * @param completion what to do when operation has been attempted
+ * @param handle where to store the internal id assigned to this watch
+ * @param watchcb what to do when a notify is received on this object
+ * @param watcherrcb what to do when the watch session encounters an error
+ * @param arg opaque value to pass to the callback
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_aio_watch(rados_ioctx_t io, const char *o,
+ rados_completion_t completion, uint64_t *handle,
+ rados_watchcb2_t watchcb,
+ rados_watcherrcb_t watcherrcb,
+ void *arg);
+
+/**
+ * Asynchronous register an interest in an object
+ *
+ * A watch operation registers the client as being interested in
+ * notifications on an object. OSDs keep track of watches on
+ * persistent storage, so they are preserved across cluster changes by
+ * the normal recovery process. If the client loses its connection to
+ * the primary OSD for a watched object, the watch will be removed
+ * after the number of seconds that configured in timeout parameter.
+ * Watches are automatically reestablished when a new
+ * connection is made, or a placement group switches OSDs.
+ *
+ * @param io the pool the object is in
+ * @param o the object to watch
+ * @param completion what to do when operation has been attempted
+ * @param handle where to store the internal id assigned to this watch
+ * @param watchcb what to do when a notify is received on this object
+ * @param watcherrcb what to do when the watch session encounters an error
+ * @param timeout how many seconds the connection will keep after disconnection
+ * @param arg opaque value to pass to the callback
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_aio_watch2(rados_ioctx_t io, const char *o,
+ rados_completion_t completion, uint64_t *handle,
+ rados_watchcb2_t watchcb,
+ rados_watcherrcb_t watcherrcb,
+ uint32_t timeout,
+ void *arg);
+
+/**
+ * Check on the status of a watch
+ *
+ * Return the number of milliseconds since the watch was last confirmed.
+ * Or, if there has been an error, return that.
+ *
+ * If there is an error, the watch is no longer valid, and should be
+ * destroyed with rados_unwatch2(). The the user is still interested
+ * in the object, a new watch should be created with rados_watch2().
+ *
+ * @param io the pool the object is in
+ * @param cookie the watch handle
+ * @returns ms since last confirmed on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_watch_check(rados_ioctx_t io, uint64_t cookie);
+
+/**
+ * Unregister an interest in an object
+ *
+ * Once this completes, no more notifies will be sent to us for this
+ * watch. This should be called to clean up unneeded watchers.
+ *
+ * @param io the pool the object is in
+ * @param o the name of the watched object (ignored)
+ * @param cookie which watch to unregister
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_unwatch(rados_ioctx_t io, const char *o, uint64_t cookie)
+ __attribute__((deprecated));
+
+/**
+ * Unregister an interest in an object
+ *
+ * Once this completes, no more notifies will be sent to us for this
+ * watch. This should be called to clean up unneeded watchers.
+ *
+ * @param io the pool the object is in
+ * @param cookie which watch to unregister
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_unwatch2(rados_ioctx_t io, uint64_t cookie);
+
+/**
+ * Asynchronous unregister an interest in an object
+ *
+ * Once this completes, no more notifies will be sent to us for this
+ * watch. This should be called to clean up unneeded watchers.
+ *
+ * @param io the pool the object is in
+ * @param completion what to do when operation has been attempted
+ * @param cookie which watch to unregister
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_aio_unwatch(rados_ioctx_t io, uint64_t cookie,
+ rados_completion_t completion);
+
+/**
+ * Sychronously notify watchers of an object
+ *
+ * This blocks until all watchers of the object have received and
+ * reacted to the notify, or a timeout is reached.
+ *
+ * @note BUG: the timeout is not changeable via the C API
+ * @note BUG: the bufferlist is inaccessible in a rados_watchcb_t
+ *
+ * @param io the pool the object is in
+ * @param o the name of the object
+ * @param ver obsolete - just pass zero
+ * @param buf data to send to watchers
+ * @param buf_len length of buf in bytes
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_notify(rados_ioctx_t io, const char *o, uint64_t ver,
+ const char *buf, int buf_len)
+ __attribute__((deprecated));
+
+/**
+ * Sychronously notify watchers of an object
+ *
+ * This blocks until all watchers of the object have received and
+ * reacted to the notify, or a timeout is reached.
+ *
+ * The reply buffer is optional. If specified, the client will get
+ * back an encoded buffer that includes the ids of the clients that
+ * acknowledged the notify as well as their notify ack payloads (if
+ * any). Clients that timed out are not included. Even clients that
+ * do not include a notify ack payload are included in the list but
+ * have a 0-length payload associated with them. The format:
+ *
+ * le32 num_acks
+ * {
+ * le64 gid global id for the client (for client.1234 that's 1234)
+ * le64 cookie cookie for the client
+ * le32 buflen length of reply message buffer
+ * u8 * buflen payload
+ * } * num_acks
+ * le32 num_timeouts
+ * {
+ * le64 gid global id for the client
+ * le64 cookie cookie for the client
+ * } * num_timeouts
+ *
+ * Note: There may be multiple instances of the same gid if there are
+ * multiple watchers registered via the same client.
+ *
+ * Note: The buffer must be released with rados_buffer_free() when the
+ * user is done with it.
+ *
+ * Note: Since the result buffer includes clients that time out, it
+ * will be set even when rados_notify() returns an error code (like
+ * -ETIMEDOUT).
+ *
+ * @param io the pool the object is in
+ * @param completion what to do when operation has been attempted
+ * @param o the name of the object
+ * @param buf data to send to watchers
+ * @param buf_len length of buf in bytes
+ * @param timeout_ms notify timeout (in ms)
+ * @param reply_buffer pointer to reply buffer pointer (free with rados_buffer_free)
+ * @param reply_buffer_len pointer to size of reply buffer
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_notify2(rados_ioctx_t io, const char *o,
+ const char *buf, int buf_len,
+ uint64_t timeout_ms,
+ char **reply_buffer, size_t *reply_buffer_len);
+CEPH_RADOS_API int rados_aio_notify(rados_ioctx_t io, const char *o,
+ rados_completion_t completion,
+ const char *buf, int buf_len,
+ uint64_t timeout_ms, char **reply_buffer,
+ size_t *reply_buffer_len);
+
+/**
+ * Acknolwedge receipt of a notify
+ *
+ * @param io the pool the object is in
+ * @param o the name of the object
+ * @param notify_id the notify_id we got on the watchcb2_t callback
+ * @param cookie the watcher handle
+ * @param buf payload to return to notifier (optional)
+ * @param buf_len payload length
+ * @returns 0 on success
+ */
+CEPH_RADOS_API int rados_notify_ack(rados_ioctx_t io, const char *o,
+ uint64_t notify_id, uint64_t cookie,
+ const char *buf, int buf_len);
+
+/**
+ * Flush watch/notify callbacks
+ *
+ * This call will block until all pending watch/notify callbacks have
+ * been executed and the queue is empty. It should usually be called
+ * after shutting down any watches before shutting down the ioctx or
+ * librados to ensure that any callbacks do not misuse the ioctx (for
+ * example by calling rados_notify_ack after the ioctx has been
+ * destroyed).
+ *
+ * @param cluster the cluster handle
+ */
+CEPH_RADOS_API int rados_watch_flush(rados_t cluster);
+/**
+ * Flush watch/notify callbacks
+ *
+ * This call will be nonblock, and the completion will be called
+ * until all pending watch/notify callbacks have been executed and
+ * the queue is empty. It should usually be called after shutting
+ * down any watches before shutting down the ioctx or
+ * librados to ensure that any callbacks do not misuse the ioctx (for
+ * example by calling rados_notify_ack after the ioctx has been
+ * destroyed).
+ *
+ * @param cluster the cluster handle
+ * @param completion what to do when operation has been attempted
+ */
+CEPH_RADOS_API int rados_aio_watch_flush(rados_t cluster, rados_completion_t completion);
+
+/** @} Watch/Notify */
+
+/**
+ * Pin an object in the cache tier
+ *
+ * When an object is pinned in the cache tier, it stays in the cache
+ * tier, and won't be flushed out.
+ *
+ * @param io the pool the object is in
+ * @param o the object id
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_cache_pin(rados_ioctx_t io, const char *o);
+
+/**
+ * Unpin an object in the cache tier
+ *
+ * After an object is unpinned in the cache tier, it can be flushed out
+ *
+ * @param io the pool the object is in
+ * @param o the object id
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_cache_unpin(rados_ioctx_t io, const char *o);
+
+/**
+ * @name Hints
+ *
+ * @{
+ */
+
+/**
+ * Set allocation hint for an object
+ *
+ * This is an advisory operation, it will always succeed (as if it was
+ * submitted with a LIBRADOS_OP_FLAG_FAILOK flag set) and is not
+ * guaranteed to do anything on the backend.
+ *
+ * @param io the pool the object is in
+ * @param o the name of the object
+ * @param expected_object_size expected size of the object, in bytes
+ * @param expected_write_size expected size of writes to the object, in bytes
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_set_alloc_hint(rados_ioctx_t io, const char *o,
+ uint64_t expected_object_size,
+ uint64_t expected_write_size);
+
+/**
+ * Set allocation hint for an object
+ *
+ * This is an advisory operation, it will always succeed (as if it was
+ * submitted with a LIBRADOS_OP_FLAG_FAILOK flag set) and is not
+ * guaranteed to do anything on the backend.
+ *
+ * @param io the pool the object is in
+ * @param o the name of the object
+ * @param expected_object_size expected size of the object, in bytes
+ * @param expected_write_size expected size of writes to the object, in bytes
+ * @param flags hints about future IO patterns
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_set_alloc_hint2(rados_ioctx_t io, const char *o,
+ uint64_t expected_object_size,
+ uint64_t expected_write_size,
+ uint32_t flags);
+
+/** @} Hints */
+
+/**
+ * @name Object Operations
+ *
+ * A single rados operation can do multiple operations on one object
+ * atomicly. The whole operation will suceed or fail, and no partial
+ * results will be visible.
+ *
+ * Operations may be either reads, which can return data, or writes,
+ * which cannot. The effects of writes are applied and visible all at
+ * once, so an operation that sets an xattr and then checks its value
+ * will not see the updated value.
+ *
+ * @{
+ */
+
+/**
+ * Create a new rados_write_op_t write operation. This will store all actions
+ * to be performed atomically. You must call rados_release_write_op when you are
+ * finished with it.
+ *
+ * @returns non-NULL on success, NULL on memory allocation error.
+ */
+CEPH_RADOS_API rados_write_op_t rados_create_write_op(void);
+
+/**
+ * Free a rados_write_op_t, must be called when you're done with it.
+ * @param write_op operation to deallocate, created with rados_create_write_op
+ */
+CEPH_RADOS_API void rados_release_write_op(rados_write_op_t write_op);
+
+/**
+ * Set flags for the last operation added to this write_op.
+ * At least one op must have been added to the write_op.
+ * @param flags see librados.h constants beginning with LIBRADOS_OP_FLAG
+ */
+CEPH_RADOS_API void rados_write_op_set_flags(rados_write_op_t write_op,
+ int flags);
+
+/**
+ * Ensure that the object exists before writing
+ * @param write_op operation to add this action to
+ */
+CEPH_RADOS_API void rados_write_op_assert_exists(rados_write_op_t write_op);
+
+/**
+ * Ensure that the object exists and that its internal version
+ * number is equal to "ver" before writing. "ver" should be a
+ * version number previously obtained with rados_get_last_version().
+ * - If the object's version is greater than the asserted version
+ * then rados_write_op_operate will return -ERANGE instead of
+ * executing the op.
+ * - If the object's version is less than the asserted version
+ * then rados_write_op_operate will return -EOVERFLOW instead
+ * of executing the op.
+ * @param write_op operation to add this action to
+ * @param ver object version number
+ */
+CEPH_RADOS_API void rados_write_op_assert_version(rados_write_op_t write_op, uint64_t ver);
+
+/**
+ * Ensure that given object range (extent) satisfies comparison.
+ *
+ * @param write_op operation to add this action to
+ * @param cmp_buf buffer containing bytes to be compared with object contents
+ * @param cmp_len length to compare and size of @cmp_buf in bytes
+ * @param off object byte offset at which to start the comparison
+ * @param prval returned result of comparison, 0 on success, negative error code
+ * on failure, (-MAX_ERRNO - mismatch_off) on mismatch
+ */
+CEPH_RADOS_API void rados_write_op_cmpext(rados_write_op_t write_op,
+ const char *cmp_buf,
+ size_t cmp_len,
+ uint64_t off,
+ int *prval);
+
+/**
+ * Ensure that given xattr satisfies comparison.
+ * If the comparison is not satisfied, the return code of the
+ * operation will be -ECANCELED
+ * @param write_op operation to add this action to
+ * @param name name of the xattr to look up
+ * @param comparison_operator currently undocumented, look for
+ * LIBRADOS_CMPXATTR_OP_EQ in librados.h
+ * @param value buffer to compare actual xattr value to
+ * @param value_len length of buffer to compare actual xattr value to
+ */
+CEPH_RADOS_API void rados_write_op_cmpxattr(rados_write_op_t write_op,
+ const char *name,
+ uint8_t comparison_operator,
+ const char *value,
+ size_t value_len);
+
+/**
+ * Ensure that the an omap value satisfies a comparison,
+ * with the supplied value on the right hand side (i.e.
+ * for OP_LT, the comparison is actual_value < value.
+ *
+ * @param write_op operation to add this action to
+ * @param key which omap value to compare
+ * @param comparison_operator one of LIBRADOS_CMPXATTR_OP_EQ,
+ LIBRADOS_CMPXATTR_OP_LT, or LIBRADOS_CMPXATTR_OP_GT
+ * @param val value to compare with
+ * @param val_len length of value in bytes
+ * @param prval where to store the return value from this action
+ */
+CEPH_RADOS_API void rados_write_op_omap_cmp(rados_write_op_t write_op,
+ const char *key,
+ uint8_t comparison_operator,
+ const char *val,
+ size_t val_len,
+ int *prval);
+
+/**
+ * Set an xattr
+ * @param write_op operation to add this action to
+ * @param name name of the xattr
+ * @param value buffer to set xattr to
+ * @param value_len length of buffer to set xattr to
+ */
+CEPH_RADOS_API void rados_write_op_setxattr(rados_write_op_t write_op,
+ const char *name,
+ const char *value,
+ size_t value_len);
+
+/**
+ * Remove an xattr
+ * @param write_op operation to add this action to
+ * @param name name of the xattr to remove
+ */
+CEPH_RADOS_API void rados_write_op_rmxattr(rados_write_op_t write_op,
+ const char *name);
+
+/**
+ * Create the object
+ * @param write_op operation to add this action to
+ * @param exclusive set to either LIBRADOS_CREATE_EXCLUSIVE or
+ LIBRADOS_CREATE_IDEMPOTENT
+ * will error if the object already exists.
+ * @param category category string (DEPRECATED, HAS NO EFFECT)
+ */
+CEPH_RADOS_API void rados_write_op_create(rados_write_op_t write_op,
+ int exclusive,
+ const char* category);
+
+/**
+ * Write to offset
+ * @param write_op operation to add this action to
+ * @param offset offset to write to
+ * @param buffer bytes to write
+ * @param len length of buffer
+ */
+CEPH_RADOS_API void rados_write_op_write(rados_write_op_t write_op,
+ const char *buffer,
+ size_t len,
+ uint64_t offset);
+
+/**
+ * Write whole object, atomically replacing it.
+ * @param write_op operation to add this action to
+ * @param buffer bytes to write
+ * @param len length of buffer
+ */
+CEPH_RADOS_API void rados_write_op_write_full(rados_write_op_t write_op,
+ const char *buffer,
+ size_t len);
+
+/**
+ * Write the same buffer multiple times
+ * @param write_op operation to add this action to
+ * @param buffer bytes to write
+ * @param data_len length of buffer
+ * @param write_len total number of bytes to write, as a multiple of @data_len
+ * @param offset offset to write to
+ */
+CEPH_RADOS_API void rados_write_op_writesame(rados_write_op_t write_op,
+ const char *buffer,
+ size_t data_len,
+ size_t write_len,
+ uint64_t offset);
+
+/**
+ * Append to end of object.
+ * @param write_op operation to add this action to
+ * @param buffer bytes to write
+ * @param len length of buffer
+ */
+CEPH_RADOS_API void rados_write_op_append(rados_write_op_t write_op,
+ const char *buffer,
+ size_t len);
+/**
+ * Remove object
+ * @param write_op operation to add this action to
+ */
+CEPH_RADOS_API void rados_write_op_remove(rados_write_op_t write_op);
+
+/**
+ * Truncate an object
+ * @param write_op operation to add this action to
+ * @param offset Offset to truncate to
+ */
+CEPH_RADOS_API void rados_write_op_truncate(rados_write_op_t write_op,
+ uint64_t offset);
+
+/**
+ * Zero part of an object
+ * @param write_op operation to add this action to
+ * @param offset Offset to zero
+ * @param len length to zero
+ */
+CEPH_RADOS_API void rados_write_op_zero(rados_write_op_t write_op,
+ uint64_t offset,
+ uint64_t len);
+
+/**
+ * Execute an OSD class method on an object
+ * See rados_exec() for general description.
+ *
+ * @param write_op operation to add this action to
+ * @param cls the name of the class
+ * @param method the name of the method
+ * @param in_buf where to find input
+ * @param in_len length of in_buf in bytes
+ * @param prval where to store the return value from the method
+ */
+CEPH_RADOS_API void rados_write_op_exec(rados_write_op_t write_op,
+ const char *cls,
+ const char *method,
+ const char *in_buf,
+ size_t in_len,
+ int *prval);
+
+/**
+ * Set key/value pairs on an object
+ *
+ * @param write_op operation to add this action to
+ * @param keys array of null-terminated char arrays representing keys to set
+ * @param vals array of pointers to values to set
+ * @param lens array of lengths corresponding to each value
+ * @param num number of key/value pairs to set
+ */
+CEPH_RADOS_API void rados_write_op_omap_set(rados_write_op_t write_op,
+ char const* const* keys,
+ char const* const* vals,
+ const size_t *lens,
+ size_t num);
+
+/**
+ * Remove key/value pairs from an object
+ *
+ * @param write_op operation to add this action to
+ * @param keys array of null-terminated char arrays representing keys to remove
+ * @param keys_len number of key/value pairs to remove
+ */
+CEPH_RADOS_API void rados_write_op_omap_rm_keys(rados_write_op_t write_op,
+ char const* const* keys,
+ size_t keys_len);
+
+/**
+ * Remove all key/value pairs from an object
+ *
+ * @param write_op operation to add this action to
+ */
+CEPH_RADOS_API void rados_write_op_omap_clear(rados_write_op_t write_op);
+
+/**
+ * Set allocation hint for an object
+ *
+ * @param write_op operation to add this action to
+ * @param expected_object_size expected size of the object, in bytes
+ * @param expected_write_size expected size of writes to the object, in bytes
+ */
+CEPH_RADOS_API void rados_write_op_set_alloc_hint(rados_write_op_t write_op,
+ uint64_t expected_object_size,
+ uint64_t expected_write_size);
+
+/**
+ * Set allocation hint for an object
+ *
+ * @param write_op operation to add this action to
+ * @param expected_object_size expected size of the object, in bytes
+ * @param expected_write_size expected size of writes to the object, in bytes
+ * @param flags hints about future IO patterns
+ */
+CEPH_RADOS_API void rados_write_op_set_alloc_hint2(rados_write_op_t write_op,
+ uint64_t expected_object_size,
+ uint64_t expected_write_size,
+ uint32_t flags);
+
+/**
+ * Perform a write operation synchronously
+ * @param write_op operation to perform
+ * @param io the ioctx that the object is in
+ * @param oid the object id
+ * @param mtime the time to set the mtime to, NULL for the current time
+ * @param flags flags to apply to the entire operation (LIBRADOS_OPERATION_*)
+ */
+CEPH_RADOS_API int rados_write_op_operate(rados_write_op_t write_op,
+ rados_ioctx_t io,
+ const char *oid,
+ time_t *mtime,
+ int flags);
+/**
+ * Perform a write operation synchronously
+ * @param write_op operation to perform
+ * @param io the ioctx that the object is in
+ * @param oid the object id
+ * @param mtime the time to set the mtime to, NULL for the current time
+ * @param flags flags to apply to the entire operation (LIBRADOS_OPERATION_*)
+ */
+
+CEPH_RADOS_API int rados_write_op_operate2(rados_write_op_t write_op,
+ rados_ioctx_t io,
+ const char *oid,
+ struct timespec *mtime,
+ int flags);
+
+/**
+ * Perform a write operation asynchronously
+ * @param write_op operation to perform
+ * @param io the ioctx that the object is in
+ * @param completion what to do when operation has been attempted
+ * @param oid the object id
+ * @param mtime the time to set the mtime to, NULL for the current time
+ * @param flags flags to apply to the entire operation (LIBRADOS_OPERATION_*)
+ */
+CEPH_RADOS_API int rados_aio_write_op_operate(rados_write_op_t write_op,
+ rados_ioctx_t io,
+ rados_completion_t completion,
+ const char *oid,
+ time_t *mtime,
+ int flags);
+
+/**
+ * Create a new rados_read_op_t write operation. This will store all
+ * actions to be performed atomically. You must call
+ * rados_release_read_op when you are finished with it (after it
+ * completes, or you decide not to send it in the first place).
+ *
+ * @returns non-NULL on success, NULL on memory allocation error.
+ */
+CEPH_RADOS_API rados_read_op_t rados_create_read_op(void);
+
+/**
+ * Free a rados_read_op_t, must be called when you're done with it.
+ * @param read_op operation to deallocate, created with rados_create_read_op
+ */
+CEPH_RADOS_API void rados_release_read_op(rados_read_op_t read_op);
+
+/**
+ * Set flags for the last operation added to this read_op.
+ * At least one op must have been added to the read_op.
+ * @param flags see librados.h constants beginning with LIBRADOS_OP_FLAG
+ */
+CEPH_RADOS_API void rados_read_op_set_flags(rados_read_op_t read_op, int flags);
+
+/**
+ * Ensure that the object exists before reading
+ * @param read_op operation to add this action to
+ */
+CEPH_RADOS_API void rados_read_op_assert_exists(rados_read_op_t read_op);
+
+/**
+ * Ensure that the object exists and that its internal version
+ * number is equal to "ver" before reading. "ver" should be a
+ * version number previously obtained with rados_get_last_version().
+ * - If the object's version is greater than the asserted version
+ * then rados_read_op_operate will return -ERANGE instead of
+ * executing the op.
+ * - If the object's version is less than the asserted version
+ * then rados_read_op_operate will return -EOVERFLOW instead
+ * of executing the op.
+ * @param read_op operation to add this action to
+ * @param ver object version number
+ */
+CEPH_RADOS_API void rados_read_op_assert_version(rados_read_op_t read_op, uint64_t ver);
+
+/**
+ * Ensure that given object range (extent) satisfies comparison.
+ *
+ * @param read_op operation to add this action to
+ * @param cmp_buf buffer containing bytes to be compared with object contents
+ * @param cmp_len length to compare and size of @cmp_buf in bytes
+ * @param off object byte offset at which to start the comparison
+ * @param prval returned result of comparison, 0 on success, negative error code
+ * on failure, (-MAX_ERRNO - mismatch_off) on mismatch
+ */
+CEPH_RADOS_API void rados_read_op_cmpext(rados_read_op_t read_op,
+ const char *cmp_buf,
+ size_t cmp_len,
+ uint64_t off,
+ int *prval);
+
+/**
+ * Ensure that the an xattr satisfies a comparison
+ * If the comparison is not satisfied, the return code of the
+ * operation will be -ECANCELED
+ * @param read_op operation to add this action to
+ * @param name name of the xattr to look up
+ * @param comparison_operator currently undocumented, look for
+ * LIBRADOS_CMPXATTR_OP_EQ in librados.h
+ * @param value buffer to compare actual xattr value to
+ * @param value_len length of buffer to compare actual xattr value to
+ */
+CEPH_RADOS_API void rados_read_op_cmpxattr(rados_read_op_t read_op,
+ const char *name,
+ uint8_t comparison_operator,
+ const char *value,
+ size_t value_len);
+
+/**
+ * Start iterating over xattrs on an object.
+ *
+ * @param read_op operation to add this action to
+ * @param iter where to store the iterator
+ * @param prval where to store the return value of this action
+ */
+CEPH_RADOS_API void rados_read_op_getxattrs(rados_read_op_t read_op,
+ rados_xattrs_iter_t *iter,
+ int *prval);
+
+/**
+ * Ensure that the an omap value satisfies a comparison,
+ * with the supplied value on the right hand side (i.e.
+ * for OP_LT, the comparison is actual_value < value.
+ *
+ * @param read_op operation to add this action to
+ * @param key which omap value to compare
+ * @param comparison_operator one of LIBRADOS_CMPXATTR_OP_EQ,
+ LIBRADOS_CMPXATTR_OP_LT, or LIBRADOS_CMPXATTR_OP_GT
+ * @param val value to compare with
+ * @param val_len length of value in bytes
+ * @param prval where to store the return value from this action
+ */
+CEPH_RADOS_API void rados_read_op_omap_cmp(rados_read_op_t read_op,
+ const char *key,
+ uint8_t comparison_operator,
+ const char *val,
+ size_t val_len,
+ int *prval);
+
+/**
+ * Get object size and mtime
+ * @param read_op operation to add this action to
+ * @param psize where to store object size
+ * @param pmtime where to store modification time
+ * @param prval where to store the return value of this action
+ */
+CEPH_RADOS_API void rados_read_op_stat(rados_read_op_t read_op,
+ uint64_t *psize,
+ time_t *pmtime,
+ int *prval);
+
+/**
+ * Read bytes from offset into buffer.
+ *
+ * prlen will be filled with the number of bytes read if successful.
+ * A short read can only occur if the read reaches the end of the
+ * object.
+ *
+ * @param read_op operation to add this action to
+ * @param offset offset to read from
+ * @param len length of buffer
+ * @param buffer where to put the data
+ * @param bytes_read where to store the number of bytes read by this action
+ * @param prval where to store the return value of this action
+ */
+CEPH_RADOS_API void rados_read_op_read(rados_read_op_t read_op,
+ uint64_t offset,
+ size_t len,
+ char *buffer,
+ size_t *bytes_read,
+ int *prval);
+
+/**
+ * Compute checksum from object data
+ *
+ * @param read_op operation to add this action to
+ * @param oid the name of the object to checksum
+ * @param type the checksum algorithm to utilize
+ * @param init_value the init value for the algorithm
+ * @param init_value_len the length of the init value
+ * @param len the number of bytes to checksum
+ * @param off the offset to start checksuming in the object
+ * @param chunk_size optional length-aligned chunk size for checksums
+ * @param pchecksum where to store the checksum result for this action
+ * @param checksum_len the number of bytes available for the result
+ * @param prval where to store the return value for this action
+ */
+CEPH_RADOS_API void rados_read_op_checksum(rados_read_op_t read_op,
+ rados_checksum_type_t type,
+ const char *init_value,
+ size_t init_value_len,
+ uint64_t offset, size_t len,
+ size_t chunk_size, char *pchecksum,
+ size_t checksum_len, int *prval);
+
+/**
+ * Execute an OSD class method on an object
+ * See rados_exec() for general description.
+ *
+ * The output buffer is allocated on the heap; the caller is
+ * expected to release that memory with rados_buffer_free(). The
+ * buffer and length pointers can all be NULL, in which case they are
+ * not filled in.
+ *
+ * @param read_op operation to add this action to
+ * @param cls the name of the class
+ * @param method the name of the method
+ * @param in_buf where to find input
+ * @param in_len length of in_buf in bytes
+ * @param out_buf where to put librados-allocated output buffer
+ * @param out_len length of out_buf in bytes
+ * @param prval where to store the return value from the method
+ */
+CEPH_RADOS_API void rados_read_op_exec(rados_read_op_t read_op,
+ const char *cls,
+ const char *method,
+ const char *in_buf,
+ size_t in_len,
+ char **out_buf,
+ size_t *out_len,
+ int *prval);
+
+/**
+ * Execute an OSD class method on an object
+ * See rados_exec() for general description.
+ *
+ * If the output buffer is too small, prval will
+ * be set to -ERANGE and used_len will be 0.
+ *
+ * @param read_op operation to add this action to
+ * @param cls the name of the class
+ * @param method the name of the method
+ * @param in_buf where to find input
+ * @param in_len length of in_buf in bytes
+ * @param out_buf user-provided buffer to read into
+ * @param out_len length of out_buf in bytes
+ * @param used_len where to store the number of bytes read into out_buf
+ * @param prval where to store the return value from the method
+ */
+CEPH_RADOS_API void rados_read_op_exec_user_buf(rados_read_op_t read_op,
+ const char *cls,
+ const char *method,
+ const char *in_buf,
+ size_t in_len,
+ char *out_buf,
+ size_t out_len,
+ size_t *used_len,
+ int *prval);
+
+/**
+ * Start iterating over key/value pairs on an object.
+ *
+ * They will be returned sorted by key.
+ *
+ * @param read_op operation to add this action to
+ * @param start_after list keys starting after start_after
+ * @param filter_prefix list only keys beginning with filter_prefix
+ * @param max_return list no more than max_return key/value pairs
+ * @param iter where to store the iterator
+ * @param prval where to store the return value from this action
+ */
+CEPH_RADOS_API void rados_read_op_omap_get_vals(rados_read_op_t read_op,
+ const char *start_after,
+ const char *filter_prefix,
+ uint64_t max_return,
+ rados_omap_iter_t *iter,
+ int *prval)
+ __attribute__((deprecated)); /* use v2 below */
+
+/**
+ * Start iterating over key/value pairs on an object.
+ *
+ * They will be returned sorted by key.
+ *
+ * @param read_op operation to add this action to
+ * @param start_after list keys starting after start_after
+ * @param filter_prefix list only keys beginning with filter_prefix
+ * @param max_return list no more than max_return key/value pairs
+ * @param iter where to store the iterator
+ * @param pmore flag indicating whether there are more keys to fetch
+ * @param prval where to store the return value from this action
+ */
+CEPH_RADOS_API void rados_read_op_omap_get_vals2(rados_read_op_t read_op,
+ const char *start_after,
+ const char *filter_prefix,
+ uint64_t max_return,
+ rados_omap_iter_t *iter,
+ unsigned char *pmore,
+ int *prval);
+
+/**
+ * Start iterating over keys on an object.
+ *
+ * They will be returned sorted by key, and the iterator
+ * will fill in NULL for all values if specified.
+ *
+ * @param read_op operation to add this action to
+ * @param start_after list keys starting after start_after
+ * @param max_return list no more than max_return keys
+ * @param iter where to store the iterator
+ * @param prval where to store the return value from this action
+ */
+CEPH_RADOS_API void rados_read_op_omap_get_keys(rados_read_op_t read_op,
+ const char *start_after,
+ uint64_t max_return,
+ rados_omap_iter_t *iter,
+ int *prval)
+ __attribute__((deprecated)); /* use v2 below */
+
+/**
+ * Start iterating over keys on an object.
+ *
+ * They will be returned sorted by key, and the iterator
+ * will fill in NULL for all values if specified.
+ *
+ * @param read_op operation to add this action to
+ * @param start_after list keys starting after start_after
+ * @param max_return list no more than max_return keys
+ * @param iter where to store the iterator
+ * @param pmore flag indicating whether there are more keys to fetch
+ * @param prval where to store the return value from this action
+ */
+CEPH_RADOS_API void rados_read_op_omap_get_keys2(rados_read_op_t read_op,
+ const char *start_after,
+ uint64_t max_return,
+ rados_omap_iter_t *iter,
+ unsigned char *pmore,
+ int *prval);
+
+/**
+ * Start iterating over specific key/value pairs
+ *
+ * They will be returned sorted by key.
+ *
+ * @param read_op operation to add this action to
+ * @param keys array of pointers to null-terminated keys to get
+ * @param keys_len the number of strings in keys
+ * @param iter where to store the iterator
+ * @param prval where to store the return value from this action
+ */
+CEPH_RADOS_API void rados_read_op_omap_get_vals_by_keys(rados_read_op_t read_op,
+ char const* const* keys,
+ size_t keys_len,
+ rados_omap_iter_t *iter,
+ int *prval);
+
+/**
+ * Perform a read operation synchronously
+ * @param read_op operation to perform
+ * @param io the ioctx that the object is in
+ * @param oid the object id
+ * @param flags flags to apply to the entire operation (LIBRADOS_OPERATION_*)
+ */
+CEPH_RADOS_API int rados_read_op_operate(rados_read_op_t read_op,
+ rados_ioctx_t io,
+ const char *oid,
+ int flags);
+
+/**
+ * Perform a read operation asynchronously
+ * @param read_op operation to perform
+ * @param io the ioctx that the object is in
+ * @param completion what to do when operation has been attempted
+ * @param oid the object id
+ * @param flags flags to apply to the entire operation (LIBRADOS_OPERATION_*)
+ */
+CEPH_RADOS_API int rados_aio_read_op_operate(rados_read_op_t read_op,
+ rados_ioctx_t io,
+ rados_completion_t completion,
+ const char *oid,
+ int flags);
+
+/** @} Object Operations */
+
+/**
+ * Take an exclusive lock on an object.
+ *
+ * @param io the context to operate in
+ * @param oid the name of the object
+ * @param name the name of the lock
+ * @param cookie user-defined identifier for this instance of the lock
+ * @param desc user-defined lock description
+ * @param duration the duration of the lock. Set to NULL for infinite duration.
+ * @param flags lock flags
+ * @returns 0 on success, negative error code on failure
+ * @returns -EBUSY if the lock is already held by another (client, cookie) pair
+ * @returns -EEXIST if the lock is already held by the same (client, cookie) pair
+ */
+CEPH_RADOS_API int rados_lock_exclusive(rados_ioctx_t io, const char * oid,
+ const char * name, const char * cookie,
+ const char * desc,
+ struct timeval * duration,
+ uint8_t flags);
+
+/**
+ * Take a shared lock on an object.
+ *
+ * @param io the context to operate in
+ * @param o the name of the object
+ * @param name the name of the lock
+ * @param cookie user-defined identifier for this instance of the lock
+ * @param tag The tag of the lock
+ * @param desc user-defined lock description
+ * @param duration the duration of the lock. Set to NULL for infinite duration.
+ * @param flags lock flags
+ * @returns 0 on success, negative error code on failure
+ * @returns -EBUSY if the lock is already held by another (client, cookie) pair
+ * @returns -EEXIST if the lock is already held by the same (client, cookie) pair
+ */
+CEPH_RADOS_API int rados_lock_shared(rados_ioctx_t io, const char * o,
+ const char * name, const char * cookie,
+ const char * tag, const char * desc,
+ struct timeval * duration, uint8_t flags);
+
+/**
+ * Release a shared or exclusive lock on an object.
+ *
+ * @param io the context to operate in
+ * @param o the name of the object
+ * @param name the name of the lock
+ * @param cookie user-defined identifier for the instance of the lock
+ * @returns 0 on success, negative error code on failure
+ * @returns -ENOENT if the lock is not held by the specified (client, cookie) pair
+ */
+CEPH_RADOS_API int rados_unlock(rados_ioctx_t io, const char *o,
+ const char *name, const char *cookie);
+
+/**
+ * Asynchronous release a shared or exclusive lock on an object.
+ *
+ * @param io the context to operate in
+ * @param o the name of the object
+ * @param name the name of the lock
+ * @param cookie user-defined identifier for the instance of the lock
+ * @param completion what to do when operation has been attempted
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_aio_unlock(rados_ioctx_t io, const char *o,
+ const char *name, const char *cookie,
+ rados_completion_t completion);
+
+/**
+ * List clients that have locked the named object lock and information about
+ * the lock.
+ *
+ * The number of bytes required in each buffer is put in the
+ * corresponding size out parameter. If any of the provided buffers
+ * are too short, -ERANGE is returned after these sizes are filled in.
+ *
+ * @param io the context to operate in
+ * @param o the name of the object
+ * @param name the name of the lock
+ * @param exclusive where to store whether the lock is exclusive (1) or shared (0)
+ * @param tag where to store the tag associated with the object lock
+ * @param tag_len number of bytes in tag buffer
+ * @param clients buffer in which locker clients are stored, separated by '\0'
+ * @param clients_len number of bytes in the clients buffer
+ * @param cookies buffer in which locker cookies are stored, separated by '\0'
+ * @param cookies_len number of bytes in the cookies buffer
+ * @param addrs buffer in which locker addresses are stored, separated by '\0'
+ * @param addrs_len number of bytes in the clients buffer
+ * @returns number of lockers on success, negative error code on failure
+ * @returns -ERANGE if any of the buffers are too short
+ */
+CEPH_RADOS_API ssize_t rados_list_lockers(rados_ioctx_t io, const char *o,
+ const char *name, int *exclusive,
+ char *tag, size_t *tag_len,
+ char *clients, size_t *clients_len,
+ char *cookies, size_t *cookies_len,
+ char *addrs, size_t *addrs_len);
+
+/**
+ * Releases a shared or exclusive lock on an object, which was taken by the
+ * specified client.
+ *
+ * @param io the context to operate in
+ * @param o the name of the object
+ * @param name the name of the lock
+ * @param client the client currently holding the lock
+ * @param cookie user-defined identifier for the instance of the lock
+ * @returns 0 on success, negative error code on failure
+ * @returns -ENOENT if the lock is not held by the specified (client, cookie) pair
+ * @returns -EINVAL if the client cannot be parsed
+ */
+CEPH_RADOS_API int rados_break_lock(rados_ioctx_t io, const char *o,
+ const char *name, const char *client,
+ const char *cookie);
+
+/**
+ * Blacklists the specified client from the OSDs
+ *
+ * @param cluster cluster handle
+ * @param client_address client address
+ * @param expire_seconds number of seconds to blacklist (0 for default)
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_blacklist_add(rados_t cluster,
+ char *client_address,
+ uint32_t expire_seconds);
+
+/**
+ * Enable an application on a pool
+ *
+ * @param ioctx pool ioctx
+ * @param app_name application name
+ * @param force 0 if only single application per pool
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_application_enable(rados_ioctx_t io,
+ const char *app_name, int force);
+
+/**
+ * List all enabled applications
+ *
+ * If the provided buffer is too short, the required length is filled in and
+ * -ERANGE is returned. Otherwise, the buffers are filled with the application
+ * names, with a '\0' after each.
+ *
+ * @param ioctx pool ioctx
+ * @param app_name application name
+ * @param values buffer in which to store application names
+ * @param vals_len number of bytes in values buffer
+ * @returns 0 on success, negative error code on failure
+ * @returns -ERANGE if either buffer is too short
+ */
+CEPH_RADOS_API int rados_application_list(rados_ioctx_t io, char *values,
+ size_t *values_len);
+
+/**
+ * Get application metadata value from pool
+ *
+ * @param ioctx pool ioctx
+ * @param app_name application name
+ * @param key metadata key
+ * @param value result buffer
+ * @param value_len maximum len of value
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_application_metadata_get(rados_ioctx_t io,
+ const char *app_name,
+ const char *key, char *value,
+ size_t *value_len);
+
+/**
+ * Set application metadata on a pool
+ *
+ * @param ioctx pool ioctx
+ * @param app_name application name
+ * @param key metadata key
+ * @param value metadata key
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_application_metadata_set(rados_ioctx_t io,
+ const char *app_name,
+ const char *key,
+ const char *value);
+
+/**
+ * Remove application metadata from a pool
+ *
+ * @param ioctx pool ioctx
+ * @param app_name application name
+ * @param key metadata key
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_application_metadata_remove(rados_ioctx_t io,
+ const char *app_name,
+ const char *key);
+
+/**
+ * List all metadata key/value pairs associated with an application.
+ *
+ * This iterates over all metadata, key_len and val_len are filled in
+ * with the number of bytes put into the keys and values buffers.
+ *
+ * If the provided buffers are too short, the required lengths are filled
+ * in and -ERANGE is returned. Otherwise, the buffers are filled with
+ * the keys and values of the metadata, with a '\0' after each.
+ *
+ * @param ioctx pool ioctx
+ * @param app_name application name
+ * @param keys buffer in which to store key names
+ * @param keys_len number of bytes in keys buffer
+ * @param values buffer in which to store values
+ * @param vals_len number of bytes in values buffer
+ * @returns 0 on succcess, negative error code on failure
+ * @returns -ERANGE if either buffer is too short
+ */
+CEPH_RADOS_API int rados_application_metadata_list(rados_ioctx_t io,
+ const char *app_name,
+ char *keys, size_t *key_len,
+ char *values,
+ size_t *vals_len);
+
+/**
+ * @name Mon/OSD/PG Commands
+ *
+ * These interfaces send commands relating to the monitor, OSD, or PGs.
+ *
+ * @{
+ */
+
+/**
+ * Send monitor command.
+ *
+ * @note Takes command string in carefully-formatted JSON; must match
+ * defined commands, types, etc.
+ *
+ * The result buffers are allocated on the heap; the caller is
+ * expected to release that memory with rados_buffer_free(). The
+ * buffer and length pointers can all be NULL, in which case they are
+ * not filled in.
+ *
+ * @param cluster cluster handle
+ * @param cmd an array of char *'s representing the command
+ * @param cmdlen count of valid entries in cmd
+ * @param inbuf any bulk input data (crush map, etc.)
+ * @param outbuf double pointer to output buffer
+ * @param outbuflen pointer to output buffer length
+ * @param outs double pointer to status string
+ * @param outslen pointer to status string length
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_mon_command(rados_t cluster, const char **cmd,
+ size_t cmdlen, const char *inbuf,
+ size_t inbuflen, char **outbuf,
+ size_t *outbuflen, char **outs,
+ size_t *outslen);
+
+/**
+ * Send ceph-mgr command.
+ *
+ * @note Takes command string in carefully-formatted JSON; must match
+ * defined commands, types, etc.
+ *
+ * The result buffers are allocated on the heap; the caller is
+ * expected to release that memory with rados_buffer_free(). The
+ * buffer and length pointers can all be NULL, in which case they are
+ * not filled in.
+ *
+ * @param cluster cluster handle
+ * @param cmd an array of char *'s representing the command
+ * @param cmdlen count of valid entries in cmd
+ * @param inbuf any bulk input data (crush map, etc.)
+ * @param outbuf double pointer to output buffer
+ * @param outbuflen pointer to output buffer length
+ * @param outs double pointer to status string
+ * @param outslen pointer to status string length
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_mgr_command(rados_t cluster, const char **cmd,
+ size_t cmdlen, const char *inbuf,
+ size_t inbuflen, char **outbuf,
+ size_t *outbuflen, char **outs,
+ size_t *outslen);
+
+/**
+ * Send monitor command to a specific monitor.
+ *
+ * @note Takes command string in carefully-formatted JSON; must match
+ * defined commands, types, etc.
+ *
+ * The result buffers are allocated on the heap; the caller is
+ * expected to release that memory with rados_buffer_free(). The
+ * buffer and length pointers can all be NULL, in which case they are
+ * not filled in.
+ *
+ * @param cluster cluster handle
+ * @param name target monitor's name
+ * @param cmd an array of char *'s representing the command
+ * @param cmdlen count of valid entries in cmd
+ * @param inbuf any bulk input data (crush map, etc.)
+ * @param outbuf double pointer to output buffer
+ * @param outbuflen pointer to output buffer length
+ * @param outs double pointer to status string
+ * @param outslen pointer to status string length
+ * @returns 0 on success, negative error code on failure
+ */
+CEPH_RADOS_API int rados_mon_command_target(rados_t cluster, const char *name,
+ const char **cmd, size_t cmdlen,
+ const char *inbuf, size_t inbuflen,
+ char **outbuf, size_t *outbuflen,
+ char **outs, size_t *outslen);
+
+/**
+ * free a rados-allocated buffer
+ *
+ * Release memory allocated by librados calls like rados_mon_command().
+ *
+ * @param buf buffer pointer
+ */
+CEPH_RADOS_API void rados_buffer_free(char *buf);
+
+CEPH_RADOS_API int rados_osd_command(rados_t cluster, int osdid,
+ const char **cmd, size_t cmdlen,
+ const char *inbuf, size_t inbuflen,
+ char **outbuf, size_t *outbuflen,
+ char **outs, size_t *outslen);
+
+CEPH_RADOS_API int rados_pg_command(rados_t cluster, const char *pgstr,
+ const char **cmd, size_t cmdlen,
+ const char *inbuf, size_t inbuflen,
+ char **outbuf, size_t *outbuflen,
+ char **outs, size_t *outslen);
+
+CEPH_RADOS_API int rados_mgr_command(rados_t cluster,
+ const char **cmd, size_t cmdlen,
+ const char *inbuf, size_t inbuflen,
+ char **outbuf, size_t *outbuflen,
+ char **outs, size_t *outslen);
+
+/*
+ * This is not a doxygen comment leadin, because doxygen breaks on
+ * a typedef with function params and returns, and I can't figure out
+ * how to fix it.
+ *
+ * Monitor cluster log
+ *
+ * Monitor events logged to the cluster log. The callback get each
+ * log entry both as a single formatted line and with each field in a
+ * separate arg.
+ *
+ * Calling with a cb argument of NULL will deregister any previously
+ * registered callback.
+ *
+ * @param cluster cluster handle
+ * @param level minimum log level (debug, info, warn|warning, err|error)
+ * @param cb callback to run for each log message. It MUST NOT block
+ * nor call back into librados.
+ * @param arg void argument to pass to cb
+ *
+ * @returns 0 on success, negative code on error
+ */
+typedef void (*rados_log_callback_t)(void *arg,
+ const char *line,
+ const char *who,
+ uint64_t sec, uint64_t nsec,
+ uint64_t seq, const char *level,
+ const char *msg);
+
+/*
+ * This is not a doxygen comment leadin, because doxygen breaks on
+ * a typedef with function params and returns, and I can't figure out
+ * how to fix it.
+ *
+ * Monitor cluster log
+ *
+ * Monitor events logged to the cluster log. The callback get each
+ * log entry both as a single formatted line and with each field in a
+ * separate arg.
+ *
+ * Calling with a cb argument of NULL will deregister any previously
+ * registered callback.
+ *
+ * @param cluster cluster handle
+ * @param level minimum log level (debug, info, warn|warning, err|error)
+ * @param cb callback to run for each log message. It MUST NOT block
+ * nor call back into librados.
+ * @param arg void argument to pass to cb
+ *
+ * @returns 0 on success, negative code on error
+ */
+typedef void (*rados_log_callback2_t)(void *arg,
+ const char *line,
+ const char *channel,
+ const char *who,
+ const char *name,
+ uint64_t sec, uint64_t nsec,
+ uint64_t seq, const char *level,
+ const char *msg);
+
+CEPH_RADOS_API int rados_monitor_log(rados_t cluster, const char *level,
+ rados_log_callback_t cb, void *arg);
+CEPH_RADOS_API int rados_monitor_log2(rados_t cluster, const char *level,
+ rados_log_callback2_t cb, void *arg);
+
+
+/**
+ * register daemon instance for a service
+ *
+ * Register us as a daemon providing a particular service. We identify
+ * the service (e.g., 'rgw') and our instance name (e.g., 'rgw.$hostname').
+ * The metadata is a map of keys and values with arbitrary static metdata
+ * for this instance. The encoding is a series of NULL-terminated strings,
+ * alternating key names and values, terminating with an empty key name.
+ * For example, "foo\0bar\0this\0that\0\0" is the dict {foo=bar,this=that}.
+ *
+ * For the lifetime of the librados instance, regular beacons will be sent
+ * to the cluster to maintain our registration in the service map.
+ *
+ * @param cluster handle
+ * @param service service name
+ * @param daemon deamon instance name
+ * @param metadata_dict static daemon metadata dict
+ */
+CEPH_RADOS_API int rados_service_register(
+ rados_t cluster,
+ const char *service,
+ const char *daemon,
+ const char *metadata_dict);
+
+/**
+ * update daemon status
+ *
+ * Update our mutable status information in the service map.
+ *
+ * The status dict is encoded the same way the daemon metadata is encoded
+ * for rados_service_register. For example, "foo\0bar\0this\0that\0\0" is
+ * {foo=bar,this=that}.
+ *
+ * @param cluster rados cluster handle
+ * @param status_dict status dict
+ */
+CEPH_RADOS_API int rados_service_update_status(
+ rados_t cluster,
+ const char *status_dict);
+
+/** @} Mon/OSD/PG commands */
+
+/*
+ * These methods are no longer supported and return -ENOTSUP where possible.
+ */
+CEPH_RADOS_API int rados_objects_list_open(
+ rados_ioctx_t io,
+ rados_list_ctx_t *ctx) __attribute__((deprecated));
+CEPH_RADOS_API uint32_t rados_objects_list_get_pg_hash_position(
+ rados_list_ctx_t ctx) __attribute__((deprecated));
+CEPH_RADOS_API uint32_t rados_objects_list_seek(
+ rados_list_ctx_t ctx,
+ uint32_t pos) __attribute__((deprecated));
+CEPH_RADOS_API int rados_objects_list_next(
+ rados_list_ctx_t ctx,
+ const char **entry,
+ const char **key) __attribute__((deprecated));
+CEPH_RADOS_API void rados_objects_list_close(
+ rados_list_ctx_t ctx) __attribute__((deprecated));
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
Code Review / stor4nfv.git / blobdiff